Start your website with Squarespace! www.squarespace.com/timd 1912 Blackhawk Hatchets available at timothydyck.com
Пікірлер
Hey Timothy, just a thought here. There is a HUGE market for steel made before 1945 due to the low background radiation. Everything made after that has elevated levels and is substandard for making medical devices that require as little radiation as possible as to not interfere with the results. There is a lot of money to be had in this kind of steel which you are in possession of. You may want to investigate and see if you're sitting on a gold mine. I know 100 year old axes are cool, but, 75 year old axes are pretty cool too and the steel can be bought with the proceeds of your 100 year old stuff...
@Kesterlath Жыл бұрын
Wow that is really cool..And yes i have also heard that there is a market for early unirradiated steel for fine instruments
@wientz Жыл бұрын
at $650 a axe he is in no danger of losing money on them. 28,000 pounds If he can sell them all he would be a multimillionaire a few times over.
@jvmiller1995 Жыл бұрын
I work in manufacturing and 100% agree with @kesterlath. I would highly recommend at least making a few calls to check the market value of low-background steel. You may be very surprised.
@mamastarfish Жыл бұрын
I was of the impression that the metal would have to come from somewhere that it would have been shielded from radiation like below a certain depth of water or under a certain depth of soil or it will still have elevated levels, also the airospace industry seeks high grade , low radiation level metals for satelites etc.
@scotthenry3401 Жыл бұрын
@@scotthenry3401 Nope, the low background comes from when it was manufactured. Making steel uses lots of air, after the first atomic tests the entire atmosphere of the planet was contaminated with radio active isotopes, that air was mixed into the steel hence the desirability of pre atomic steel.
@spencereagle1118 Жыл бұрын
Your ability to fashion these hatchets etc, make a guy with no interest, til I saw, want it! Now that’s artistry. Well done man.
@Brian-os9qj25 күн бұрын
As someone who lays the rails for Tier 1 railroads, this is super cool to see it repurposed instead of laying all over our yards and roadways
@bgemski11 ай бұрын
I live in Kentucky we use railroad steel to hold back creek banks
@johnnysanders594711 ай бұрын
This reminds me of when I was a girl living in an area where train tracks had been, and still are for that matter. We used to hike up, play games, etc. This video reminded me of a wonderful time in my life! Great fun to see how life goes on............in a good way!
@kathymaeve11 ай бұрын
That's what I'm saying
@weirdmatter11 ай бұрын
Would make good beams/joists for a house!
@TheRainHarvester11 ай бұрын
I figured I went to the scrap yard
@nonyabusiness974711 ай бұрын
Hi Timothy. Beautiful workmanship. While I would want to put it on display, I am sure thatthese axes deserve to work. May I offer you some metallurgical feedback that might save some head scratching as you work through that pile of rails. I served as the rail rechnical specialist at Australia's rail mill in Whyalla through the 1980's and 90s. I had cause to visit the Algoma Mill where your rails were manufactured and in 1998-99 was a consultant at the Sydney Steel mill in Sydney Nova Scotia, representing them on the AREMA (American Railroad Engineering & Maintenance of Way Association. Modern rails are all continuously cast but up until about 1990, almost all rails used in Canada were made by the ingot route. Apart from improving the yield, continuous casting eliminated a potentially serious quality issue inherent to the ingot process - central segregation and potentially even pipe (shrinkage cavity). Pipe would be a disaster for your purpose though you would likely see it during the itial forging. The segregation though you would not see and it would give you grief durng hardening and tempering. I suggest that you use the head and base for axes and find a less challenging use for the web. The Carbon content is typically 0.6 - 0.82% lower end of this range in older,smaller rails higher in larger, newer ones. Johnny Jones is correct in commenting that rail has a high Manganese (Mn) content (usually about 0.8 - 1.0%. though not high enough to be a serious issue and certianly a long way short of the Hadfields Managanese steel which is cast into crossings which he may be thinking of. Johnny is also right that the head of the railwork hardens but that disappears as soon as you heat it to forge it. A bigger concern is micro-cracking of the running surface (called head checking) which results from the work hardening. Mocro they may be but they are still cracks and will grow during forging. I suggest that you clean up the rail head on your belt grinder and check for cracks - a little kerosine sprayed on the surface is a good crack detector. When spraye on the surface it soaks into the cracks. When the excess kero is wiked off, some of what soaked into the cracks will seep back out again to show you where the cracks are. I've subscribed to see more.
@davidgriffiths82711 ай бұрын
I nominate this as the most content-relevant KZhead comment of all time. Now everyone resume with your "First!" comments.
@utubewillyman11 ай бұрын
Whyalla steel works - went through as a kid. In. The early. 1970’s
@McGoldbug11 ай бұрын
David Griffiths I'm sure you could buy 2 and keep one as a decorative item and one for chopping. i don't know but you may get a good deal for 2
@Antipodean3311 ай бұрын
I was an NDE inspector in a Nuke plant. The kerosene trim is how Dye Penetrant testing started. Wipe the kerosene on, let it soak in for a few minutes, this is called the dwell time, wipe off all of the excess and then dust it lightly with talcum / baby powder, this will really highlight any cracks that are open to the surface. This won’t work for internal cracking, that requires X-ray or ultrasound.
@scottvaughn782411 ай бұрын
I worked at the Port Kembla Steelworks in the late 1970's, I was told that when the Steel was being made for manufacture into railway line, no scrap or Sinter was used in the process. Can you confirm that this was (is) the case?
@LawrenceMclean11 ай бұрын
All of the blacksmithing hammers I own were bought from Ethan. It's good to see you guys working together. 👍
@Theorof Жыл бұрын
Though I have never tried black smithing in person, I am a welder of many years. I do and always will tip my hat to a dedicated smithy. Art and Heart can create wonderful things.
@crustydribblins11 ай бұрын
As hard as these are to make. How much would you sell these axes for?
@EternalResonance11 ай бұрын
Rail has a high manganese content, which means it will “work harden”, or become actually harder on the contact surface with the train wheels after use. An older rail is harder on top than a new rail. I tested this metallurgical fact during my railroad, welding, blacksmith, and machinist days.
@johnnyjones225511 ай бұрын
It's incredible that you chose to share that, fair play, the future internet thanks you 👍
@bikerchrisukk11 ай бұрын
Cool! Thanks for sharing that!
@corkkyle11 ай бұрын
That's amazing. Also please preserve your knowledge somehow. Maybe make some KZhead videos?
@What-he5pr11 ай бұрын
That work hardening disappears with each heat cycle. That's why you don't want to preheat mang. steel much before welding on, for instance, ground engaging equipment like B/E shovel buckets and teeth. It'll soften it up. All modern steel (as opposed to wrought) has some degree of mang. in it and without knowing the actual content (and carbon) it's difficult to really know how to heat treat it with a high degree of confidence.
@rossholden675211 ай бұрын
Did you also test how much different rails for different applications differ in their composition? After all, light duty cycle heavy haulage for CP in the arctic will be different from Southern Railways in the UK, used for very high duty cycle, low loaded commuter lines, which in turn will be different from low duty cycle, low load rail for Indian Railways for use on their tropical mountain lines. All of that is only the composition, any foundry making rail will have many versions, produced by varying the pressure and shape of the rollers, temperature of the steel, as well as the composition. I guess you've seen metallurgical cross sections that show the detailed microstructure, which is what delivers the precise specification of course. So what has all that to do with making axes? I'm baffled.
@nicktecky5511 ай бұрын
Never appreciated how much workmanship goes into making an axe - Admire your passion for your work. Thanks for sharing ..
@johncalleja211711 ай бұрын
You can never have too much raw stock. It gives you the freedom to experiment and develop new methods and products without worry. Forge on, Timothy…
@rgetso Жыл бұрын
NEVER?
@alro2434 Жыл бұрын
As a carpenter I can confirm you can never have enough raw material
@Glitchtheplanet11 ай бұрын
ah now there is a phrase I heard from cross stitchers called stash beyond life expectancy.....but thats only for cross stitch patterns and cotton skeins and has nothing to do with steel or wrought iron....honest🤣🤣
@TalRohan11 ай бұрын
@@TalRohan Not like the price goes down on steel. It'll always appreciate with time, unlike your currency.
@sknerl11 ай бұрын
@@Glitchtheplanet And as another carpenter I can confirm you can never have enough clamps. Great and interesting video I just happened upon this.
@EdFhvn11 ай бұрын
Really enjoyed watching, I manufactured & heat treated industrial, knives & saws for 35 years. I now have over 22,000 blueprints on file of chipper knives, lathe knives, granulator knives, paper knives, leather knives, Zamboni ice scrapper blades & saw blades up to 144" in diameter.
@82lube Жыл бұрын
You may want to consider making medical grade equipment, they currently pay a fortune for equipment that's made from pre nuclear era steel, old shipwrecks are targeted because of the presence of rare low-background steel, commonly known as pre-war steel. This steel holds immense value due to its low radiation levels.
@morrisonmeister10 ай бұрын
Holy shit, I just typed this comment. Yeah, it's surprising how little people know about pre war steel.
@varun00910 ай бұрын
Is the rail steel not exposed the same as any other? What about virgin steel from ore?
@cyoungso10 ай бұрын
@@cyoungso No, it's just old steel. Pre-nuclear has super low background radiation. Nuclear weapons testing results in a relatively large amount of radiation being released into the atmosphere which can interfere with super sensitive equipment. These days though, the demand for pre-nuclear steel has dropped due to the ban on atmospheric testing from back in 1963.
@nyssfairchild224410 ай бұрын
He's a blacksmith. How are you supposed to made surgical instruments out of an old train rail dumbass?
@TruthTortoise8110 ай бұрын
@@cyoungso There has been this surge in KZhead videos about this topic and its extremely misleading and has produced a legion of comments like the original. Yes its worth a lot....in very very small quantities and to very few customers. The amount of steel needed for probe tips is measured in grams and the people that sell it have stockpiles of the stuff in the thousands of tons. Also if for some reason it needed to be made from ore it can be done using purified oxygen furnaces (not cheap but not particularly expensive either). In the same way that snake venom is worth hundreds of thousands of dollars per gram to reasearchers....it would be pretty stupid to start milking snakes. The people that need the stuff have long since secured a supply chain.
@Hierax41510 ай бұрын
For a college summer job, I worked for the Canadian Pacific Railroad turn-out crew picking up the old lines. They would sell the rails to razor blade companies. They wanted it because it was extremely high-quality, premium, hard steel. Interesting job to say the least.
@patrickv.palmer293810 ай бұрын
That's a million bucks worth of art material and a fine use for high manganese scrap rail. The way you refined and market product is a lesson for anyone interested in these things.
@obfuscated309011 ай бұрын
I could watch you make axe heads 100x’s over and never get tired watching you make them. It’s mesmerizing……You do great work Timothy. Thank you for bringing us all along on the fabrication process. I know filming and editing adds a lot of extra time onto each project. Thanks again 👍🙂
@davidsnyder2000 Жыл бұрын
Hard to make an edge needs other steel.
@robertjennings39711 ай бұрын
My grandfather was from Norway. He was a blacksmith. During WWII he worked in the Brooklyn Naval Shipyard. He was the lead blacksmith and laid the keels for destroyers and liberty ships. He was a real American hero.
@POBulkhead11 ай бұрын
I thank him for his service. Skål!
@seeharvester11 ай бұрын
This memorial day tomorrow 5/29/23 for your grandfather and the brothers !!!
@brianblithe227111 ай бұрын
He would be furious to see what have US become.
@johndock916411 ай бұрын
@@johndock9164 Well Norway did surrender to the Nazis, and I had family in Norway so I dont know that there would be any grounds for judgement
@lutomson349611 ай бұрын
@@lutomson3496 what?
@johndock916411 ай бұрын
We cut a Weld out of a piece of continuous welded rail at our welding plant at our Union Pacific Rail welding plant . The piece was sent to be tested for any defects . The piece is cut into 16 pieces to fully test the weld . The welds are a flash butt weld in the plant and the strings of rail were 1440 feet long when I retired but now they are about 2000 feet long and the rail trains haul 50 strings of rail . Great idea of using the old 85 pound rail . Awesome video .
@25vrd4811 ай бұрын
My step-dad retired as a Supervisor for UP in the 1980's and he would go out in an high rail, and do onsite inspections.
@davidalanjonesridge987411 ай бұрын
Outstanding work and attention to detail. Worth every penny. This is the kind of craftsmanship we need more of these days.
@ApexHerbivore Жыл бұрын
Great to see ... isn't it.
@lallineedisahandle Жыл бұрын
I love his work but 400-650 bucks for a hand axe is a bit on the pricey side! It is cool I mean that in every way but not to many folk can afford them and if they can they are not going to want to use it. That is not a stab at his workmanship but we could not afford more people to make quality over priced tools.
@jvmiller1995 Жыл бұрын
@@jvmiller1995 The best axeman in the world demand the best axes. This isn't about everyone owning one, any more than everyone should own a Lamborghini. You can spend $3000 on a pair of shoes that won't last anywhere near as long. Yes they're expensive, but this axe when looked after could last hundreds of years.
@ApexHerbivore Жыл бұрын
@@ApexHerbivore Knock yourself out buy 3 or 4. I understand they are not for everyone that was the flipping point. Most people are not going to spend $650 on a hand axe. That is not to take away from his craftmanship it is just a fact. That and their is a huge difference between a Italian sports car and and a hand axe.
@jvmiller1995 Жыл бұрын
@@ApexHerbivore I have a 1844 Helko Werk Classic Forester made in Germany it is it is hand made dropped forged and beautiful, these are the best axes IMO, I think I paid close to $200 which my freinds thought was crazy, but it is worth every penny
@BILLY-px3hw11 ай бұрын
I can tell by your numbers that you have been doing this for a while on KZhead and I have just found you. This has to be one of the coolest things I’ve watched on KZhead. It is hard to explain with words why it is so satisfying watching you pound old railroad rail into a hatchet. I was sitting here watching and I said out loud, this is so cool.
@PaPawsWorkShop11 ай бұрын
You have quite a shop with some very serious equipment! Nice job on the axes. Fascinating seeing the process.
@dcsensui11 ай бұрын
My grandfather was a hammerman in the clyde shipyards Scotland. Before WW1.. Great workTimothy.
@norton750cc11 ай бұрын
My paternal grandfather also worked at Clyde shipyard before migrating to Baltimore to work in the ship yard there.
@DrMarcusDay11 ай бұрын
Is hammerman the same as strycker? just curious
@markburd854111 ай бұрын
@@markburd8541 A blacksmith's stryker is an assistant to a blacksmith. A stryker swings the heavy sledgehammer striking the hot iron
@DrMarcusDay11 ай бұрын
@@markburd8541 A hammerman is a mechanic whose work involves the use of the hammer, as a blacksmith, weaponsmith or armorer,
@DrMarcusDay11 ай бұрын
@@DrMarcusDay At that time steam hammers were used to forge steel items. he hammerman would control the hammer .Assistants would move the ingot under the hammer to shape it correctly
@norton750cc11 ай бұрын
Your whole process and the videos of the past year or so and everything youve been doing have allllll come together for me with this videos and I see where you're going with it all! It makes so much sense now! Haha you're a smart dude, and I can't wait to see how this all turns out!
@Dalton-bo3wb Жыл бұрын
I’m a 70 year old retired tool maker when I got in this business but as an apprentice you guys told me railroad rails is the best material to make your tooling out of like angle plates and vises because it’s been run over so many times. It’s so old when you machine it it’s not gonna move anywhere
@ChitownRon11 ай бұрын
"organically" forged 😅
@knoopx11 ай бұрын
I wanted to buy one but at $650 I think I'll just stick to my cheap-o one, but these things are awesome and wouldn't blame anyone who did grab one.
@shoegum736211 ай бұрын
@@thelonewolf666 Hand crafted, cottage industry made, is never cheap.
@billpetersen29811 ай бұрын
I agree.. a lot of money for a ax... 🙄
@VintageTexas5911 ай бұрын
@@thelonewolf666 It is a piece of art. Difficult to value. To the people who buy them they are worth it.
@dlcurtis6911 ай бұрын
@@dlcurtis69 i have a ferrari 65 cobra m that i use to drag logs out of the woods with . sure i could do it with a ford but why ?
@very5ick11224 күн бұрын
@@dlcurtis69 That is BS. It is craftsmanship done by a tradesman, not art. Just because so many people now are too soft to do real work, doesn't turn something that has been done in a similar way for thousands of years into art. Not everything is art. His prices are way too high. I say that as a tradesman myself. He can make multiple a day. There is overhead, but the profit margin on these is robbery. If it wasn't for uneducated people watching youtube videos, he wouldn't have a market at this price. I'm all for a tradesman making good money on the products they make, but I also can balance that with the value of the product being sold. There is a big mismatch here.
@dom651224 күн бұрын
What a wonderful product all around! It's probably too late but I would have added a historical locomotive stamp on the axe and box for this series :)
@mfeldheim11 ай бұрын
Omg, I was gonna buy one until I saw the $650 price tag 😮, I get these are hand made pieces and all but that's a bit high if u ask me.
@MikeyJ68611 ай бұрын
My grandfather's ax, father replaced the handle, but no need to replace the blade... really cool to watch blacksmithing being done.
@polyrhythmia11 ай бұрын
ha ha - love how axes cross generations, new handle then a new head, still the original axe.. ha ha ha... (just like the old Massey Fergusson, after every part is replaced , still the same old girl..)
@kadmow11 ай бұрын
I love my grandfather's axe. It has had 3 replacement handles and 2 replacement heads over its life, but it's just as sweet now. ;)
@ljprep625011 ай бұрын
@@ljprep6250 - the love of a worn and hand-used tool is wonderful... (solong as the nameplate remains, it is all "original")
@kadmow11 ай бұрын
@@ljprep6250SO, ITS NOT EVEN HIS AXE ANYMORE...
@jonrajsl29111 ай бұрын
@@jonrajsl291 It's a joke, Jon.
@ljprep625011 ай бұрын
Congrats Timothy Dyck from Canada, on showing-us all how u go about the Methods of making ur Blackhawk Hatchets. looks cool..
@billyhaddock554011 ай бұрын
This is heirloom quality. I love the fact you make these axes with passion and knowledge. Great job !!
@willd651510 ай бұрын
Dude hes tryin to sell this axe for 450-650, meanwhile you can buy an actual quality granfors bruks axe, handmade in sweden from some of the best steel for 75% of the cost. And the gransfors bruk actually has quality steel not some shit 1084 steel.
@TheBloodshotFilms10 ай бұрын
Not only are the axes made in Canada, so was the 1912 rail - Algoma Steel, Sault Ste. Marie, Ontario
@pileofstuff Жыл бұрын
My neighbor is the one that tore all this old rail up he is going to Alberta now
@paulb733411 ай бұрын
Very interesting, a lot of work goes into making a high-quality hatchet from railroad rails. What a great addition for any serious collector!
@LadderMover11 ай бұрын
Thanks soo much for taking us along on this journey. im trying to find a valid reason to get an axe after watching these videos. great work as always
@diceryuri11 ай бұрын
This is such a cool idea for reclaimed Steel, its a known steel and because there is a date on each rail you can date the Axe, brilliant. Very cool Timothy and thanks for sharing
@TalRohan11 ай бұрын
It’s not a known steel because they have no idea what kind of steel it is. They just know it’ll be consistent if they use the matching rails.
@Jake-bt3fc11 ай бұрын
@@Jake-bt3fc Railway steel is consistently a medium carbon high manganese steel that work hardens, its a slightly different alloy in the states but its been the same basically since modern rails were invented.
@TalRohan11 ай бұрын
I don't have a need for an axe, however, I now have the want for one of these artworks.Truely awesome to watch and your filming is ace. Cheers.
@gregorysukroo716711 ай бұрын
Now thats a LOT of metal! Keep up the great work 👍
@2nd_bloxx Жыл бұрын
Lovely work......and your axes and hatchets will probably be around for the next century, assuming the new owners care for and use them properly like we all should with any tool. Fascinating process to watch. Keep up the great artistry with those reclaimed rails.
@rixretros11 ай бұрын
I would hope so for $650 it would need to last 5 generations
@joshcrider931911 ай бұрын
So cool that you're using the old rails to create these well made axes. Terrific work.
@PJRII11 ай бұрын
It's always fun to do your own thing. Axes are always needed. I think in every house, not in an apartment, but in every house there is an ax. I have three 🙂
@akgoldbear766911 ай бұрын
Hey! I live in an apartment and I have 6 axes. I ostensibly bought them for woodworking, but who am I kidding; I use them as mental masturbatory aids. Sexyest tools ever. Don't judge me! I am what I am. And I keep one behind the door for greeting uninvited visitors. That, I admit, might get me 'judged' one day...
@barkebaat11 ай бұрын
Every time I buy a house, I find hammers left behind. A significant nuber of houses also have hatchets left behind, but not quality ones like Timothy made in his video.
@scientificperspective160411 ай бұрын
Beautiful process and end piece of functional art. I'm with one of the other posts, put it to work! These are just too nice to be wall hangers or viewed in collectors boxes. Congratulations young man, I wish I was going to be around to watch you progress in your trade and art! E
@ericwiltz658411 ай бұрын
I came across your channel just by chance and I'm really glad I did. It has been very enlightening to watch you work.
@rickkephartactual770611 ай бұрын
Very nice video, impressive and quality workmanship... good to see still people out there that care about their products.👍
@dm986011 ай бұрын
Beautiful work from excellent source material, Timothy. First time viewer here--instant subscribe. Thanks for sharing!
@0num4 Жыл бұрын
You are definitely producing an excellent product. Old iron is best. Beautiful work and the kind of craftsmanship that's impossible to find now days. Sure wish I could afford one. geez I'd have to sell tickets just for people to look at it hanging in a bullet proof case above my mantle.
@jaychapman204511 ай бұрын
that's the catch the price… I don't know how he could compete with factory production. His hatchet at $450 I was just on Amazon and you can get a good one yeah a great one for 40 bucks… Though I am impressed with his quality I just don't see how he would be able to compete with mass production. I can tell he enjoys making them that's probably why he does it
@jeffrenman414611 ай бұрын
@@jeffrenman4146 I don't think he's competing with mass production at all. I think his marketing strategy is more on old world tools like the old tools that were passed down through generations with no functional damage. And then selling more as a wall mount peace. I mean it comes in a custom made wooden box with correlating cereal numbers like a collectors item and not packed with wadded up paper but what looks like wood or something. It's definitely not marketed for someone like me that thinks it's a cool ax and I'm actually going to use it. I might be willing to pay 150- maybe even 175 plus shipping and it can ship in a cardboard tube without the leather work lol . But this ax seems to be more directed at the guy that puts it in a glass case with a light and a sign that reads " (in case of a zombie apocalypse break glass)" lol 650???? Not for this fat boy. I say more power to him though. I like his work and hope he sells everything he makes for 650 a pop and has to hire 200 people to help build them.
@jaychapman204511 ай бұрын
@@jaychapman2045 LOL… You're funny and thank you so much for being here. Yes I agree with every word that you said. I also wish him the best and I think his products will be around for centuries… Yeah they're probably just showpieces. Stay well and take care
@jeffrenman414611 ай бұрын
My new electric saw would blow your mind.😂 I think you're right, these antiques should be kept for display. LoL.
@MrBollocks1011 ай бұрын
@@MrBollocks10 you do realize that saws and axes are used in tandem? One doesn't replace the other. An ax is still used for it's same purpose now as it was hundreds of years ago.
@jaychapman204511 ай бұрын
I gave you a thumbs up which means that I pushed on that blank thumbs-up figure and it turned black so that means that KZhead will pay you fairly and properly for your efforts and is proof that people are viewing your videos and I found out it doesn't cost anything.. yeah I like helping people too have a nice day sir
@tedanderson46311 ай бұрын
Good buy, 20 years ago my friend bought a property in Portugal and there were 10 old rails on it, he gave it to me for collecting it, very useful stuff.
@chrisclarke782811 ай бұрын
The ore that they used to make these rails was some of the best. It yielded "blue" steel after smelting with little to no effort. A Swedish company scrapped an old rail line near me that was over a hundred years old. When assayed it was determined that they could convert 200kms of rail into mens/womens razor blades......hella profit.
@wildtwindad11 ай бұрын
Simple, elegant, utilitarian, beautiful. All four axes. You're good man. ✌️🖖
@russward261211 ай бұрын
I cannot resist watching metal being squeezed in slomo, it's great. Like your attention to detail and your final presentation at ship time, that says it all. Smart move on the old rail purchase.
@ohasis833111 ай бұрын
You should expand into making small anvils for a lot of blacksmith others
@richardaragon139111 ай бұрын
And the rail is small anyway so the small anvils could also be made available for the home shop.
@davidalanjonesridge987411 ай бұрын
Awesome!! This is the only kind of "hatchet job" that I enjoy these days!
@tvm7383611 ай бұрын
My favorite is the conversion of rail into a small anvil for the home shop. Having read some of the comments I agree as to the quality, composition, and presentation presented in this VID.
@davidalanjonesridge987411 ай бұрын
Ive always saved shelving angle iron. This is next level :) Great investment, into most probably really great metal, and certainly a historic commodity.
@jsmythib Жыл бұрын
you sir are a master craftmen. what you do is almost a lost art. metal forming and the techneque is a joy to watch.
@johnrapp979411 ай бұрын
Beautiful work man, keep up the good work. Nice to see blacksmiths still doing the true work of skill. Thank you for sharing
@Mr.Fabrication00728 күн бұрын
I really enjoyed this video. Beautiful craftsmanship. Shared with my family.
@LordUSABless11 ай бұрын
These are beautiful pieces of art that no doubt took a lot of time and skill to make. But for $650 I doubt any of them will ever be used! Lol I was wanting one to use around the farm but I'm definitely not on that level 😅
@KyleCotton111 ай бұрын
Yeah, but it's Canadien, so $475 in USD
@MaidenRockCoder11 ай бұрын
@MaidenRockCoder his site says "Prices in USD" 😂
@insertnamehere665511 ай бұрын
You might be surprised. Some gentleman farmers have quite the bankroll.
@fieryvale9 ай бұрын
You and your model of business is a true inspiration!!! Love what you do and how you do it!! Keep doing you brother!!!
@clintott9575 Жыл бұрын
Man this is such a pleasure to watch a skilled craftsman. 👏🏽👏🏽
@rxanthony11 ай бұрын
I forgot how therapeutic and relaxing your videos are thank you and I can put a lot of hard work into these as well as the axis. I can see all the detail in the attention that you put into it. Beautiful video and I might say some damn good looking axis. Make On. Maker 238
@thedeloachsdoyoutube837711 ай бұрын
Amazing craftsmanship!
@murraymakesstuff Жыл бұрын
That's awesome man. I have a handcrafted log home with rusted corten steel siding/roofing. I scored some 1910 rails with Alaska history and used them as my top rail on my deck railings. Mortised into log post. Weird thing was logs were already up when I scored them, and my eve's log center of post to center of post was 33', same length of rail and didn't even have to cut them! Sick material
@dee2ski11 ай бұрын
You are fortunate that the rails were 33 feet instead of 39 feet. On the side of the web is information about the rail section, company and mill rolled, and the year and month rolled(these will be in raised characters). The other side of the rail will have numbers stamped in which is the heat number and will include the bloom of A, B, C, D, etc. What are the raised letters and numbers?
@royreynolds10811 ай бұрын
@@royreynolds108 Agreed on the length. I did have to cut my gable end sections, wasn't too bad with a hot saw, metal seemed soft actually. It's stamped Carnegie 1910. I'd need a ladder to see the other numbers. I believe it was left over rail from the CR&NW going from Cordova to Kennicott Alaska. I'm certainly no steel or RR expert, but the history behind the Copper River railroad is quite interesting and worth a read if you haven't read about it already. It was in a bone yard in Valdez, which at the time was in a race with Cordova to get the train to Kennicott.
@dee2ski11 ай бұрын
I've got a buddy who does rail repair & maintenance who told me about the old rail steel. VERY cool! I thought I already had enough axes, ....... but... maybe not? Gonna be watching more of this channel - first time I saw it was this video today.
@lovesloudcars11 ай бұрын
The detail and love you put into each of your axes blows me away, i just came across Square Space earlier today I really like that you use that website to sell. I will be ordering one, I've been making knives for a few years now and have yet to make an ax. It's difficult to do without a large hammer like you have, but eventually I'll make one. Their axes look absolutely beautiful and I can't wait to buy one. Thank you for posting 🇺🇲
@Mbonner7311 ай бұрын
Whoa, this stock could be too valuable to make axes out of. Pre atomic test 'low background' steel is very sought after.
@spencereagle1118 Жыл бұрын
Ll taken about value of preatomic test steel for medical and scientific instruments!
@williamjmansfield8768 Жыл бұрын
Great work! Good to see a young man producing a very fine product in Canada! Very good looking equipment also!
@daviddeleenheer-mh2vh11 ай бұрын
Hey Friends! Thanks so much for all the encouragement! I really appreciate all your positive feed back! If you would like a Blackhawk Hatchet head over to my website! timothydyck.com/
@TimothyDyck Жыл бұрын
I think the one missing might be the one I bought for my brother eh??
@spencerwiltse2855 Жыл бұрын
@@spencerwiltse2855 Might just be! haha, thanks again!
@TimothyDyck Жыл бұрын
Amaizing workmanship! Love the historic use of these RR rails. -- SUGGESTION: How about making small anvils?? Maybe 6 to 12 inches long? With HARDIE, HORN and PRITCHEL with bolt holes too... They would be super-handy for the small projects guys like me.
@johnfriedmann241311 ай бұрын
As a model maker I sometimes have need for a small anvil to set rivets or punch or do forming on. A small rail based anvil with a horn would be ideal.
@jenniferwhitewolf378411 ай бұрын
I used to work on the railway and my first shift was marking old rail for the cropper to come along and cut it,it was at Abington in Scotland 👍🏻👍🏻
@martinkscott11 ай бұрын
I actually got emotional watching this, being a perfectionist in several hobbies myself...I just love it when I see someone like Timothy ply his trade sparing absolutely ZERO compromise! Nothing but respect for this man...and hopefully my wife and kids will make dad a happy camper on his 70th B-day👍🤣
@robertmuckle298528 күн бұрын
I'd be super curious to get an alloy composition of that old rail vs new rail. Very cool project Tim! Talking about them work hardening and cracking, I think they are a high boron(?) alloy like forklift tyne
@seldoon_nemar Жыл бұрын
If you find a scrapyard with an XRF gun they can tell you since those are used to sort alloys.
@obfuscated309011 ай бұрын
What's a tyne? I come from Tyneside. A big steel area, back in the day You tweaked my curiosity.😊 Our river Tyne comes from the Viking word for River. I thought I was on to something, for a second.😊 LoL
@MrBollocks1011 ай бұрын
@@MrBollocks10 no idea where the term comes from but I just know it's a special kind of steel and it's correctly tynes, but people use tines now to mean the same thing. It probably has to do with your area producing the higher boron steel's needed to make them
@seldoon_nemar11 ай бұрын
This is awesome! Very cool axes! :) one tip if i May say wouls be to use a wire brush to knock off the scale before you start hammering and after hammering, i think it will reduce the amount of scale being hit against the metal and cause the pitting and uneven surface.
@HurjaPena11 ай бұрын
The unusual surface is part of the artistic effect and helps sell product. Retaining the scale is a wise choice for what is an art piece capable of doing good work.
@obfuscated309011 ай бұрын
Great on you Tim, looks like a great time !
@nathandreher14111 ай бұрын
Great process to watch ,patience time and care went into these ,thanks for showing us . Greetings from Wales UK .
@indianatone21828 күн бұрын
Timothy Dyck, This was an interesting video. These days I am mainly tracking solar system colonization and gravitational engineering. So, seeing your tools, methods and materials, I tried to translate that to Mars, Moon, various orbits and transit situations in space. Mass is expensive so taking tons of materials and equipment is generally not the way to go. More likely people will process local materials, and 3D print metals where they are needed, but glass and nano-synthesized more likely. The Mars "regolith" (unconsolidated deposits covering solid rock) is about 18.4% iron oxide (Fe2O3). The regolith is mostly silicon dioxide (quartz sand), ferric oxide, and the oxides of aluminum, calcium and sulfur. For making things like pipes, plates, structures, windows various types of Mars concrete are being tested (simulated materials). About 42% of the surface materials on Mars is Oxygen, so "mining" and extracting oxygen is part of the plans. Once the oxygen is separated (many methods), then the residual silicon (22%), iron (13%), magnesium (10%), aluminum (6%), calcium (3%), sodium (2%), potassium (2%), titanium (0.6%), manganese (0.2%), chromium, phosphorus etc -- can be used for various things. Mars glass and iron will be important. I think that Mars humans will use hammers, shovels, hoes, spoons, forks, plates, cups. I expect nuclear and atomic heat to be common. Low cost, compact sources of electricity, heat, radiation (for industrial, chemical and practical uses). Richard Collins, The Internet Foundation
@RichardKCollins11 ай бұрын
Plenty of raw materials on those asteroids and moons. I wonder how high the slag piles will get.
@patrickdonegan955911 ай бұрын
I think what you're doing is very cool , and great work from what I was able to see , I was wondering if you ever thought about doing a line of firemen's axes , short handled and smaller heads , it's a very versatile design besides being a very useful instrument , hope you would give it some thought if you haven't already , in the meantime I sincerely wish you the best of luck with the regular axe heads , I really think you have a winner .
@nobleroman113311 ай бұрын
I love these axes. So much character in that like a piece of Art. Great work!
@ClaymansHandwerk10 ай бұрын
Both you and your friend have an incredibly inviting and friendly personality. love it
@topelite666 Жыл бұрын
Nicely presented Tim...I would say that by using the rails that you are on the right track! 🚂...ps nice shafts but I would use a lighter stain to show the wood off (retired woodcarver)
@iainclark483511 ай бұрын
I wanted to buy one looked up price and it's worth it but the price is out of my range .what a good product
@ericlakota1847 Жыл бұрын
Great quality products came from quality work. Thanks for your video. As a student of forging, it's fun to watch.
@sh1nyarm0r11 ай бұрын
Great show. I admire your equipment and your skillful use of it. There's lots of scrap rail.
@snookmeister5515 күн бұрын
Hey, these are really cool and I checked out your page. Would you ever consider doing forestry axes? I have been looking for a North American custom forestry axe for some time now. Everything I buy breaks in less than a month. The old Swedish axes are getting harder to come by too, and an axe made from old train rail is such a cool idea.
@icefire9969911 ай бұрын
The UK post WW2 had a salvage operation to raise metal from the German Fleet sank at Scapa Flo off Scotlands coast, for the same reason and for the medical aspect. It is also stated that the Gillette Razor blade company also used the same salvaged metal.
@Goneaway-4-gud11 ай бұрын
Yep, it's called low radiation steel and it's invaluable to particle physicists, as well as radiological labs for diagnostic imagery of our bodies.
@spvillano11 ай бұрын
There is a Chinese salvage company who are desecrating war graves off Malaysia apparently they have ripped huge chunks of steel from the battleship HMS PRINCE OF WALES and the battlecruiser repulse over 800 men went down with these ships during a battle with the Japanese WW2 the metal is highly sought after for medical equipment it’s an absolute disgrace that these Chinese scumbags are getting away with this the same company have also targeted American warships
@thomasshepard603011 ай бұрын
I'am glad you are using old materials and giving them a new life I do the same. Beautiful work on the axes like the profile godbless and be safe Timothy.
@mountainwolf111 ай бұрын
Fascinating from start to finish Timothy............you guys a true craftsmen
@blairguinea681111 ай бұрын
And 1912 there was a huge sunken ship, causing a stir about the quality of steel assembled in Ireland boatyards.Your power hammer is awesome.Dark color wedge in ash or hickory is an elegant solution.
@toddavis860311 ай бұрын
Yea that 'sunken ship' was caused by faulty Irish steel, and not plowing full steam ahead into an iceberg field and the pilot panick steering the bow straight into the side of one raking a giant gash across the lower side of the non welded riveted plates flooding several sections. ok .
@DavidDiaz-zp4hu11 ай бұрын
If that stuff really is 100 years old, then it's pre-nuclear age, so it's a relatively special kind of steel. It can be used for experimental machines and whatnot because there is no nuclear component to it.
@SouthToeJoe Жыл бұрын
thanks tim made my day feel a bit better watching this
@1234MrShane11 ай бұрын
You do fantastic work in creating those unique axes thank you so much for showing us how you do it, the price you have set on those axes are definitely worth it sadly there out of my range but hey a man can dream ah!
@winterradicallds835311 ай бұрын
for that price,hell no
@danielpersson748311 ай бұрын
Wow I'm super impressed. I have some super old ax heads I found and saved . You give me some inspiration.
@angelartistic305611 ай бұрын
I bought a small section of rail at a yard sale, intending to make an anvil from it. Cleaned it up at home, and voila, it had Carnegie Steel Co. mill marks! It was a triumphant moment.
@filster193411 ай бұрын
Great video, love to see you and Ethan working together!
@cindybinette77811 ай бұрын
Great video! Awesome looking product. Love your attention to all of the details. :)
@warrenvalentino576311 ай бұрын
just incredible work. Great quality video and impressive use of reclaimed material.
@jasongarrett139011 ай бұрын
I have my grandfathers old railway hatchet and this really reminded me of that, might be nice to get something similar that's a little bit more wieldy and useable since his is so heavy.
@ItsYaBoi-ATA11 ай бұрын
Awesome work, the art of Blacksmithing keeps us in touch with our ancestors, this is what raised us to civilisation, all the best from England!
@davebloke82911 ай бұрын
Great worx Tim!! Sweet bit of income too. I spent 36 years as a metal stud framer in high rise buildings, we built this city on Rock and Roll.
@bobv821911 ай бұрын
I have 1 word for the craftsmanship of your Axe's & that is " EXCELLENCE " & how you pack them in your own crafted Lovely boxes. You have great pride in your work & it sure shows :) Thumbs up From "Downunder" Aust. Well done Mate :)
Hey Timothy, just a thought here. There is a HUGE market for steel made before 1945 due to the low background radiation. Everything made after that has elevated levels and is substandard for making medical devices that require as little radiation as possible as to not interfere with the results. There is a lot of money to be had in this kind of steel which you are in possession of. You may want to investigate and see if you're sitting on a gold mine. I know 100 year old axes are cool, but, 75 year old axes are pretty cool too and the steel can be bought with the proceeds of your 100 year old stuff...
Wow that is really cool..And yes i have also heard that there is a market for early unirradiated steel for fine instruments
at $650 a axe he is in no danger of losing money on them. 28,000 pounds If he can sell them all he would be a multimillionaire a few times over.
I work in manufacturing and 100% agree with @kesterlath. I would highly recommend at least making a few calls to check the market value of low-background steel. You may be very surprised.
I was of the impression that the metal would have to come from somewhere that it would have been shielded from radiation like below a certain depth of water or under a certain depth of soil or it will still have elevated levels, also the airospace industry seeks high grade , low radiation level metals for satelites etc.
@@scotthenry3401 Nope, the low background comes from when it was manufactured. Making steel uses lots of air, after the first atomic tests the entire atmosphere of the planet was contaminated with radio active isotopes, that air was mixed into the steel hence the desirability of pre atomic steel.
Your ability to fashion these hatchets etc, make a guy with no interest, til I saw, want it! Now that’s artistry. Well done man.
As someone who lays the rails for Tier 1 railroads, this is super cool to see it repurposed instead of laying all over our yards and roadways
I live in Kentucky we use railroad steel to hold back creek banks
This reminds me of when I was a girl living in an area where train tracks had been, and still are for that matter. We used to hike up, play games, etc. This video reminded me of a wonderful time in my life! Great fun to see how life goes on............in a good way!
That's what I'm saying
Would make good beams/joists for a house!
I figured I went to the scrap yard
Hi Timothy. Beautiful workmanship. While I would want to put it on display, I am sure thatthese axes deserve to work. May I offer you some metallurgical feedback that might save some head scratching as you work through that pile of rails. I served as the rail rechnical specialist at Australia's rail mill in Whyalla through the 1980's and 90s. I had cause to visit the Algoma Mill where your rails were manufactured and in 1998-99 was a consultant at the Sydney Steel mill in Sydney Nova Scotia, representing them on the AREMA (American Railroad Engineering & Maintenance of Way Association. Modern rails are all continuously cast but up until about 1990, almost all rails used in Canada were made by the ingot route. Apart from improving the yield, continuous casting eliminated a potentially serious quality issue inherent to the ingot process - central segregation and potentially even pipe (shrinkage cavity). Pipe would be a disaster for your purpose though you would likely see it during the itial forging. The segregation though you would not see and it would give you grief durng hardening and tempering. I suggest that you use the head and base for axes and find a less challenging use for the web. The Carbon content is typically 0.6 - 0.82% lower end of this range in older,smaller rails higher in larger, newer ones. Johnny Jones is correct in commenting that rail has a high Manganese (Mn) content (usually about 0.8 - 1.0%. though not high enough to be a serious issue and certianly a long way short of the Hadfields Managanese steel which is cast into crossings which he may be thinking of. Johnny is also right that the head of the railwork hardens but that disappears as soon as you heat it to forge it. A bigger concern is micro-cracking of the running surface (called head checking) which results from the work hardening. Mocro they may be but they are still cracks and will grow during forging. I suggest that you clean up the rail head on your belt grinder and check for cracks - a little kerosine sprayed on the surface is a good crack detector. When spraye on the surface it soaks into the cracks. When the excess kero is wiked off, some of what soaked into the cracks will seep back out again to show you where the cracks are. I've subscribed to see more.
I nominate this as the most content-relevant KZhead comment of all time. Now everyone resume with your "First!" comments.
Whyalla steel works - went through as a kid. In. The early. 1970’s
David Griffiths I'm sure you could buy 2 and keep one as a decorative item and one for chopping. i don't know but you may get a good deal for 2
I was an NDE inspector in a Nuke plant. The kerosene trim is how Dye Penetrant testing started. Wipe the kerosene on, let it soak in for a few minutes, this is called the dwell time, wipe off all of the excess and then dust it lightly with talcum / baby powder, this will really highlight any cracks that are open to the surface. This won’t work for internal cracking, that requires X-ray or ultrasound.
I worked at the Port Kembla Steelworks in the late 1970's, I was told that when the Steel was being made for manufacture into railway line, no scrap or Sinter was used in the process. Can you confirm that this was (is) the case?
All of the blacksmithing hammers I own were bought from Ethan. It's good to see you guys working together. 👍
Though I have never tried black smithing in person, I am a welder of many years. I do and always will tip my hat to a dedicated smithy. Art and Heart can create wonderful things.
As hard as these are to make. How much would you sell these axes for?
Rail has a high manganese content, which means it will “work harden”, or become actually harder on the contact surface with the train wheels after use. An older rail is harder on top than a new rail. I tested this metallurgical fact during my railroad, welding, blacksmith, and machinist days.
It's incredible that you chose to share that, fair play, the future internet thanks you 👍
Cool! Thanks for sharing that!
That's amazing. Also please preserve your knowledge somehow. Maybe make some KZhead videos?
That work hardening disappears with each heat cycle. That's why you don't want to preheat mang. steel much before welding on, for instance, ground engaging equipment like B/E shovel buckets and teeth. It'll soften it up. All modern steel (as opposed to wrought) has some degree of mang. in it and without knowing the actual content (and carbon) it's difficult to really know how to heat treat it with a high degree of confidence.
Did you also test how much different rails for different applications differ in their composition? After all, light duty cycle heavy haulage for CP in the arctic will be different from Southern Railways in the UK, used for very high duty cycle, low loaded commuter lines, which in turn will be different from low duty cycle, low load rail for Indian Railways for use on their tropical mountain lines. All of that is only the composition, any foundry making rail will have many versions, produced by varying the pressure and shape of the rollers, temperature of the steel, as well as the composition. I guess you've seen metallurgical cross sections that show the detailed microstructure, which is what delivers the precise specification of course. So what has all that to do with making axes? I'm baffled.
Never appreciated how much workmanship goes into making an axe - Admire your passion for your work. Thanks for sharing ..
You can never have too much raw stock. It gives you the freedom to experiment and develop new methods and products without worry. Forge on, Timothy…
NEVER?
As a carpenter I can confirm you can never have enough raw material
ah now there is a phrase I heard from cross stitchers called stash beyond life expectancy.....but thats only for cross stitch patterns and cotton skeins and has nothing to do with steel or wrought iron....honest🤣🤣
@@TalRohan Not like the price goes down on steel. It'll always appreciate with time, unlike your currency.
@@Glitchtheplanet And as another carpenter I can confirm you can never have enough clamps. Great and interesting video I just happened upon this.
Really enjoyed watching, I manufactured & heat treated industrial, knives & saws for 35 years. I now have over 22,000 blueprints on file of chipper knives, lathe knives, granulator knives, paper knives, leather knives, Zamboni ice scrapper blades & saw blades up to 144" in diameter.
You may want to consider making medical grade equipment, they currently pay a fortune for equipment that's made from pre nuclear era steel, old shipwrecks are targeted because of the presence of rare low-background steel, commonly known as pre-war steel. This steel holds immense value due to its low radiation levels.
Holy shit, I just typed this comment. Yeah, it's surprising how little people know about pre war steel.
Is the rail steel not exposed the same as any other? What about virgin steel from ore?
@@cyoungso No, it's just old steel. Pre-nuclear has super low background radiation. Nuclear weapons testing results in a relatively large amount of radiation being released into the atmosphere which can interfere with super sensitive equipment. These days though, the demand for pre-nuclear steel has dropped due to the ban on atmospheric testing from back in 1963.
He's a blacksmith. How are you supposed to made surgical instruments out of an old train rail dumbass?
@@cyoungso There has been this surge in KZhead videos about this topic and its extremely misleading and has produced a legion of comments like the original. Yes its worth a lot....in very very small quantities and to very few customers. The amount of steel needed for probe tips is measured in grams and the people that sell it have stockpiles of the stuff in the thousands of tons. Also if for some reason it needed to be made from ore it can be done using purified oxygen furnaces (not cheap but not particularly expensive either). In the same way that snake venom is worth hundreds of thousands of dollars per gram to reasearchers....it would be pretty stupid to start milking snakes. The people that need the stuff have long since secured a supply chain.
For a college summer job, I worked for the Canadian Pacific Railroad turn-out crew picking up the old lines. They would sell the rails to razor blade companies. They wanted it because it was extremely high-quality, premium, hard steel. Interesting job to say the least.
That's a million bucks worth of art material and a fine use for high manganese scrap rail. The way you refined and market product is a lesson for anyone interested in these things.
I could watch you make axe heads 100x’s over and never get tired watching you make them. It’s mesmerizing……You do great work Timothy. Thank you for bringing us all along on the fabrication process. I know filming and editing adds a lot of extra time onto each project. Thanks again 👍🙂
Hard to make an edge needs other steel.
My grandfather was from Norway. He was a blacksmith. During WWII he worked in the Brooklyn Naval Shipyard. He was the lead blacksmith and laid the keels for destroyers and liberty ships. He was a real American hero.
I thank him for his service. Skål!
This memorial day tomorrow 5/29/23 for your grandfather and the brothers !!!
He would be furious to see what have US become.
@@johndock9164 Well Norway did surrender to the Nazis, and I had family in Norway so I dont know that there would be any grounds for judgement
@@lutomson3496 what?
We cut a Weld out of a piece of continuous welded rail at our welding plant at our Union Pacific Rail welding plant . The piece was sent to be tested for any defects . The piece is cut into 16 pieces to fully test the weld . The welds are a flash butt weld in the plant and the strings of rail were 1440 feet long when I retired but now they are about 2000 feet long and the rail trains haul 50 strings of rail . Great idea of using the old 85 pound rail . Awesome video .
My step-dad retired as a Supervisor for UP in the 1980's and he would go out in an high rail, and do onsite inspections.
Outstanding work and attention to detail. Worth every penny. This is the kind of craftsmanship we need more of these days.
Great to see ... isn't it.
I love his work but 400-650 bucks for a hand axe is a bit on the pricey side! It is cool I mean that in every way but not to many folk can afford them and if they can they are not going to want to use it. That is not a stab at his workmanship but we could not afford more people to make quality over priced tools.
@@jvmiller1995 The best axeman in the world demand the best axes. This isn't about everyone owning one, any more than everyone should own a Lamborghini. You can spend $3000 on a pair of shoes that won't last anywhere near as long. Yes they're expensive, but this axe when looked after could last hundreds of years.
@@ApexHerbivore Knock yourself out buy 3 or 4. I understand they are not for everyone that was the flipping point. Most people are not going to spend $650 on a hand axe. That is not to take away from his craftmanship it is just a fact. That and their is a huge difference between a Italian sports car and and a hand axe.
@@ApexHerbivore I have a 1844 Helko Werk Classic Forester made in Germany it is it is hand made dropped forged and beautiful, these are the best axes IMO, I think I paid close to $200 which my freinds thought was crazy, but it is worth every penny
I can tell by your numbers that you have been doing this for a while on KZhead and I have just found you. This has to be one of the coolest things I’ve watched on KZhead. It is hard to explain with words why it is so satisfying watching you pound old railroad rail into a hatchet. I was sitting here watching and I said out loud, this is so cool.
You have quite a shop with some very serious equipment! Nice job on the axes. Fascinating seeing the process.
My grandfather was a hammerman in the clyde shipyards Scotland. Before WW1.. Great workTimothy.
My paternal grandfather also worked at Clyde shipyard before migrating to Baltimore to work in the ship yard there.
Is hammerman the same as strycker? just curious
@@markburd8541 A blacksmith's stryker is an assistant to a blacksmith. A stryker swings the heavy sledgehammer striking the hot iron
@@markburd8541 A hammerman is a mechanic whose work involves the use of the hammer, as a blacksmith, weaponsmith or armorer,
@@DrMarcusDay At that time steam hammers were used to forge steel items. he hammerman would control the hammer .Assistants would move the ingot under the hammer to shape it correctly
Your whole process and the videos of the past year or so and everything youve been doing have allllll come together for me with this videos and I see where you're going with it all! It makes so much sense now! Haha you're a smart dude, and I can't wait to see how this all turns out!
I’m a 70 year old retired tool maker when I got in this business but as an apprentice you guys told me railroad rails is the best material to make your tooling out of like angle plates and vises because it’s been run over so many times. It’s so old when you machine it it’s not gonna move anywhere
"organically" forged 😅
I wanted to buy one but at $650 I think I'll just stick to my cheap-o one, but these things are awesome and wouldn't blame anyone who did grab one.
@@thelonewolf666 Hand crafted, cottage industry made, is never cheap.
I agree.. a lot of money for a ax... 🙄
@@thelonewolf666 It is a piece of art. Difficult to value. To the people who buy them they are worth it.
@@dlcurtis69 i have a ferrari 65 cobra m that i use to drag logs out of the woods with . sure i could do it with a ford but why ?
@@dlcurtis69 That is BS. It is craftsmanship done by a tradesman, not art. Just because so many people now are too soft to do real work, doesn't turn something that has been done in a similar way for thousands of years into art. Not everything is art. His prices are way too high. I say that as a tradesman myself. He can make multiple a day. There is overhead, but the profit margin on these is robbery. If it wasn't for uneducated people watching youtube videos, he wouldn't have a market at this price. I'm all for a tradesman making good money on the products they make, but I also can balance that with the value of the product being sold. There is a big mismatch here.
What a wonderful product all around! It's probably too late but I would have added a historical locomotive stamp on the axe and box for this series :)
Omg, I was gonna buy one until I saw the $650 price tag 😮, I get these are hand made pieces and all but that's a bit high if u ask me.
My grandfather's ax, father replaced the handle, but no need to replace the blade... really cool to watch blacksmithing being done.
ha ha - love how axes cross generations, new handle then a new head, still the original axe.. ha ha ha... (just like the old Massey Fergusson, after every part is replaced , still the same old girl..)
I love my grandfather's axe. It has had 3 replacement handles and 2 replacement heads over its life, but it's just as sweet now. ;)
@@ljprep6250 - the love of a worn and hand-used tool is wonderful... (solong as the nameplate remains, it is all "original")
@@ljprep6250SO, ITS NOT EVEN HIS AXE ANYMORE...
@@jonrajsl291 It's a joke, Jon.
Congrats Timothy Dyck from Canada, on showing-us all how u go about the Methods of making ur Blackhawk Hatchets. looks cool..
This is heirloom quality. I love the fact you make these axes with passion and knowledge. Great job !!
Dude hes tryin to sell this axe for 450-650, meanwhile you can buy an actual quality granfors bruks axe, handmade in sweden from some of the best steel for 75% of the cost. And the gransfors bruk actually has quality steel not some shit 1084 steel.
Not only are the axes made in Canada, so was the 1912 rail - Algoma Steel, Sault Ste. Marie, Ontario
My neighbor is the one that tore all this old rail up he is going to Alberta now
Very interesting, a lot of work goes into making a high-quality hatchet from railroad rails. What a great addition for any serious collector!
Thanks soo much for taking us along on this journey. im trying to find a valid reason to get an axe after watching these videos. great work as always
This is such a cool idea for reclaimed Steel, its a known steel and because there is a date on each rail you can date the Axe, brilliant. Very cool Timothy and thanks for sharing
It’s not a known steel because they have no idea what kind of steel it is. They just know it’ll be consistent if they use the matching rails.
@@Jake-bt3fc Railway steel is consistently a medium carbon high manganese steel that work hardens, its a slightly different alloy in the states but its been the same basically since modern rails were invented.
I don't have a need for an axe, however, I now have the want for one of these artworks.Truely awesome to watch and your filming is ace. Cheers.
Now thats a LOT of metal! Keep up the great work 👍
Lovely work......and your axes and hatchets will probably be around for the next century, assuming the new owners care for and use them properly like we all should with any tool. Fascinating process to watch. Keep up the great artistry with those reclaimed rails.
I would hope so for $650 it would need to last 5 generations
So cool that you're using the old rails to create these well made axes. Terrific work.
It's always fun to do your own thing. Axes are always needed. I think in every house, not in an apartment, but in every house there is an ax. I have three 🙂
Hey! I live in an apartment and I have 6 axes. I ostensibly bought them for woodworking, but who am I kidding; I use them as mental masturbatory aids. Sexyest tools ever. Don't judge me! I am what I am. And I keep one behind the door for greeting uninvited visitors. That, I admit, might get me 'judged' one day...
Every time I buy a house, I find hammers left behind. A significant nuber of houses also have hatchets left behind, but not quality ones like Timothy made in his video.
Beautiful process and end piece of functional art. I'm with one of the other posts, put it to work! These are just too nice to be wall hangers or viewed in collectors boxes. Congratulations young man, I wish I was going to be around to watch you progress in your trade and art! E
I came across your channel just by chance and I'm really glad I did. It has been very enlightening to watch you work.
Very nice video, impressive and quality workmanship... good to see still people out there that care about their products.👍
Beautiful work from excellent source material, Timothy. First time viewer here--instant subscribe. Thanks for sharing!
You are definitely producing an excellent product. Old iron is best. Beautiful work and the kind of craftsmanship that's impossible to find now days. Sure wish I could afford one. geez I'd have to sell tickets just for people to look at it hanging in a bullet proof case above my mantle.
that's the catch the price… I don't know how he could compete with factory production. His hatchet at $450 I was just on Amazon and you can get a good one yeah a great one for 40 bucks… Though I am impressed with his quality I just don't see how he would be able to compete with mass production. I can tell he enjoys making them that's probably why he does it
@@jeffrenman4146 I don't think he's competing with mass production at all. I think his marketing strategy is more on old world tools like the old tools that were passed down through generations with no functional damage. And then selling more as a wall mount peace. I mean it comes in a custom made wooden box with correlating cereal numbers like a collectors item and not packed with wadded up paper but what looks like wood or something. It's definitely not marketed for someone like me that thinks it's a cool ax and I'm actually going to use it. I might be willing to pay 150- maybe even 175 plus shipping and it can ship in a cardboard tube without the leather work lol . But this ax seems to be more directed at the guy that puts it in a glass case with a light and a sign that reads " (in case of a zombie apocalypse break glass)" lol 650???? Not for this fat boy. I say more power to him though. I like his work and hope he sells everything he makes for 650 a pop and has to hire 200 people to help build them.
@@jaychapman2045 LOL… You're funny and thank you so much for being here. Yes I agree with every word that you said. I also wish him the best and I think his products will be around for centuries… Yeah they're probably just showpieces. Stay well and take care
My new electric saw would blow your mind.😂 I think you're right, these antiques should be kept for display. LoL.
@@MrBollocks10 you do realize that saws and axes are used in tandem? One doesn't replace the other. An ax is still used for it's same purpose now as it was hundreds of years ago.
I gave you a thumbs up which means that I pushed on that blank thumbs-up figure and it turned black so that means that KZhead will pay you fairly and properly for your efforts and is proof that people are viewing your videos and I found out it doesn't cost anything.. yeah I like helping people too have a nice day sir
Good buy, 20 years ago my friend bought a property in Portugal and there were 10 old rails on it, he gave it to me for collecting it, very useful stuff.
The ore that they used to make these rails was some of the best. It yielded "blue" steel after smelting with little to no effort. A Swedish company scrapped an old rail line near me that was over a hundred years old. When assayed it was determined that they could convert 200kms of rail into mens/womens razor blades......hella profit.
Simple, elegant, utilitarian, beautiful. All four axes. You're good man. ✌️🖖
I cannot resist watching metal being squeezed in slomo, it's great. Like your attention to detail and your final presentation at ship time, that says it all. Smart move on the old rail purchase.
You should expand into making small anvils for a lot of blacksmith others
And the rail is small anyway so the small anvils could also be made available for the home shop.
Awesome!! This is the only kind of "hatchet job" that I enjoy these days!
My favorite is the conversion of rail into a small anvil for the home shop. Having read some of the comments I agree as to the quality, composition, and presentation presented in this VID.
Ive always saved shelving angle iron. This is next level :) Great investment, into most probably really great metal, and certainly a historic commodity.
you sir are a master craftmen. what you do is almost a lost art. metal forming and the techneque is a joy to watch.
Beautiful work man, keep up the good work. Nice to see blacksmiths still doing the true work of skill. Thank you for sharing
I really enjoyed this video. Beautiful craftsmanship. Shared with my family.
These are beautiful pieces of art that no doubt took a lot of time and skill to make. But for $650 I doubt any of them will ever be used! Lol I was wanting one to use around the farm but I'm definitely not on that level 😅
Yeah, but it's Canadien, so $475 in USD
@MaidenRockCoder his site says "Prices in USD" 😂
You might be surprised. Some gentleman farmers have quite the bankroll.
You and your model of business is a true inspiration!!! Love what you do and how you do it!! Keep doing you brother!!!
Man this is such a pleasure to watch a skilled craftsman. 👏🏽👏🏽
I forgot how therapeutic and relaxing your videos are thank you and I can put a lot of hard work into these as well as the axis. I can see all the detail in the attention that you put into it. Beautiful video and I might say some damn good looking axis. Make On. Maker 238
Amazing craftsmanship!
That's awesome man. I have a handcrafted log home with rusted corten steel siding/roofing. I scored some 1910 rails with Alaska history and used them as my top rail on my deck railings. Mortised into log post. Weird thing was logs were already up when I scored them, and my eve's log center of post to center of post was 33', same length of rail and didn't even have to cut them! Sick material
You are fortunate that the rails were 33 feet instead of 39 feet. On the side of the web is information about the rail section, company and mill rolled, and the year and month rolled(these will be in raised characters). The other side of the rail will have numbers stamped in which is the heat number and will include the bloom of A, B, C, D, etc. What are the raised letters and numbers?
@@royreynolds108 Agreed on the length. I did have to cut my gable end sections, wasn't too bad with a hot saw, metal seemed soft actually. It's stamped Carnegie 1910. I'd need a ladder to see the other numbers. I believe it was left over rail from the CR&NW going from Cordova to Kennicott Alaska. I'm certainly no steel or RR expert, but the history behind the Copper River railroad is quite interesting and worth a read if you haven't read about it already. It was in a bone yard in Valdez, which at the time was in a race with Cordova to get the train to Kennicott.
I've got a buddy who does rail repair & maintenance who told me about the old rail steel. VERY cool! I thought I already had enough axes, ....... but... maybe not? Gonna be watching more of this channel - first time I saw it was this video today.
The detail and love you put into each of your axes blows me away, i just came across Square Space earlier today I really like that you use that website to sell. I will be ordering one, I've been making knives for a few years now and have yet to make an ax. It's difficult to do without a large hammer like you have, but eventually I'll make one. Their axes look absolutely beautiful and I can't wait to buy one. Thank you for posting 🇺🇲
Whoa, this stock could be too valuable to make axes out of. Pre atomic test 'low background' steel is very sought after.
Ll taken about value of preatomic test steel for medical and scientific instruments!
Great work! Good to see a young man producing a very fine product in Canada! Very good looking equipment also!
Hey Friends! Thanks so much for all the encouragement! I really appreciate all your positive feed back! If you would like a Blackhawk Hatchet head over to my website! timothydyck.com/
I think the one missing might be the one I bought for my brother eh??
@@spencerwiltse2855 Might just be! haha, thanks again!
Amaizing workmanship! Love the historic use of these RR rails. -- SUGGESTION: How about making small anvils?? Maybe 6 to 12 inches long? With HARDIE, HORN and PRITCHEL with bolt holes too... They would be super-handy for the small projects guys like me.
As a model maker I sometimes have need for a small anvil to set rivets or punch or do forming on. A small rail based anvil with a horn would be ideal.
I used to work on the railway and my first shift was marking old rail for the cropper to come along and cut it,it was at Abington in Scotland 👍🏻👍🏻
I actually got emotional watching this, being a perfectionist in several hobbies myself...I just love it when I see someone like Timothy ply his trade sparing absolutely ZERO compromise! Nothing but respect for this man...and hopefully my wife and kids will make dad a happy camper on his 70th B-day👍🤣
I'd be super curious to get an alloy composition of that old rail vs new rail. Very cool project Tim! Talking about them work hardening and cracking, I think they are a high boron(?) alloy like forklift tyne
If you find a scrapyard with an XRF gun they can tell you since those are used to sort alloys.
What's a tyne? I come from Tyneside. A big steel area, back in the day You tweaked my curiosity.😊 Our river Tyne comes from the Viking word for River. I thought I was on to something, for a second.😊 LoL
@@MrBollocks10 no idea where the term comes from but I just know it's a special kind of steel and it's correctly tynes, but people use tines now to mean the same thing. It probably has to do with your area producing the higher boron steel's needed to make them
This is awesome! Very cool axes! :) one tip if i May say wouls be to use a wire brush to knock off the scale before you start hammering and after hammering, i think it will reduce the amount of scale being hit against the metal and cause the pitting and uneven surface.
The unusual surface is part of the artistic effect and helps sell product. Retaining the scale is a wise choice for what is an art piece capable of doing good work.
Great on you Tim, looks like a great time !
Great process to watch ,patience time and care went into these ,thanks for showing us . Greetings from Wales UK .
Timothy Dyck, This was an interesting video. These days I am mainly tracking solar system colonization and gravitational engineering. So, seeing your tools, methods and materials, I tried to translate that to Mars, Moon, various orbits and transit situations in space. Mass is expensive so taking tons of materials and equipment is generally not the way to go. More likely people will process local materials, and 3D print metals where they are needed, but glass and nano-synthesized more likely. The Mars "regolith" (unconsolidated deposits covering solid rock) is about 18.4% iron oxide (Fe2O3). The regolith is mostly silicon dioxide (quartz sand), ferric oxide, and the oxides of aluminum, calcium and sulfur. For making things like pipes, plates, structures, windows various types of Mars concrete are being tested (simulated materials). About 42% of the surface materials on Mars is Oxygen, so "mining" and extracting oxygen is part of the plans. Once the oxygen is separated (many methods), then the residual silicon (22%), iron (13%), magnesium (10%), aluminum (6%), calcium (3%), sodium (2%), potassium (2%), titanium (0.6%), manganese (0.2%), chromium, phosphorus etc -- can be used for various things. Mars glass and iron will be important. I think that Mars humans will use hammers, shovels, hoes, spoons, forks, plates, cups. I expect nuclear and atomic heat to be common. Low cost, compact sources of electricity, heat, radiation (for industrial, chemical and practical uses). Richard Collins, The Internet Foundation
Plenty of raw materials on those asteroids and moons. I wonder how high the slag piles will get.
I think what you're doing is very cool , and great work from what I was able to see , I was wondering if you ever thought about doing a line of firemen's axes , short handled and smaller heads , it's a very versatile design besides being a very useful instrument , hope you would give it some thought if you haven't already , in the meantime I sincerely wish you the best of luck with the regular axe heads , I really think you have a winner .
I love these axes. So much character in that like a piece of Art. Great work!
Both you and your friend have an incredibly inviting and friendly personality. love it
Nicely presented Tim...I would say that by using the rails that you are on the right track! 🚂...ps nice shafts but I would use a lighter stain to show the wood off (retired woodcarver)
I wanted to buy one looked up price and it's worth it but the price is out of my range .what a good product
Great quality products came from quality work. Thanks for your video. As a student of forging, it's fun to watch.
Great show. I admire your equipment and your skillful use of it. There's lots of scrap rail.
Hey, these are really cool and I checked out your page. Would you ever consider doing forestry axes? I have been looking for a North American custom forestry axe for some time now. Everything I buy breaks in less than a month. The old Swedish axes are getting harder to come by too, and an axe made from old train rail is such a cool idea.
The UK post WW2 had a salvage operation to raise metal from the German Fleet sank at Scapa Flo off Scotlands coast, for the same reason and for the medical aspect. It is also stated that the Gillette Razor blade company also used the same salvaged metal.
Yep, it's called low radiation steel and it's invaluable to particle physicists, as well as radiological labs for diagnostic imagery of our bodies.
There is a Chinese salvage company who are desecrating war graves off Malaysia apparently they have ripped huge chunks of steel from the battleship HMS PRINCE OF WALES and the battlecruiser repulse over 800 men went down with these ships during a battle with the Japanese WW2 the metal is highly sought after for medical equipment it’s an absolute disgrace that these Chinese scumbags are getting away with this the same company have also targeted American warships
I'am glad you are using old materials and giving them a new life I do the same. Beautiful work on the axes like the profile godbless and be safe Timothy.
Fascinating from start to finish Timothy............you guys a true craftsmen
And 1912 there was a huge sunken ship, causing a stir about the quality of steel assembled in Ireland boatyards.Your power hammer is awesome.Dark color wedge in ash or hickory is an elegant solution.
Yea that 'sunken ship' was caused by faulty Irish steel, and not plowing full steam ahead into an iceberg field and the pilot panick steering the bow straight into the side of one raking a giant gash across the lower side of the non welded riveted plates flooding several sections. ok .
If that stuff really is 100 years old, then it's pre-nuclear age, so it's a relatively special kind of steel. It can be used for experimental machines and whatnot because there is no nuclear component to it.
thanks tim made my day feel a bit better watching this
You do fantastic work in creating those unique axes thank you so much for showing us how you do it, the price you have set on those axes are definitely worth it sadly there out of my range but hey a man can dream ah!
for that price,hell no
Wow I'm super impressed. I have some super old ax heads I found and saved . You give me some inspiration.
I bought a small section of rail at a yard sale, intending to make an anvil from it. Cleaned it up at home, and voila, it had Carnegie Steel Co. mill marks! It was a triumphant moment.
Great video, love to see you and Ethan working together!
Great video! Awesome looking product. Love your attention to all of the details. :)
just incredible work. Great quality video and impressive use of reclaimed material.
I have my grandfathers old railway hatchet and this really reminded me of that, might be nice to get something similar that's a little bit more wieldy and useable since his is so heavy.
Awesome work, the art of Blacksmithing keeps us in touch with our ancestors, this is what raised us to civilisation, all the best from England!
Great worx Tim!! Sweet bit of income too. I spent 36 years as a metal stud framer in high rise buildings, we built this city on Rock and Roll.
I have 1 word for the craftsmanship of your Axe's & that is " EXCELLENCE " & how you pack them in your own crafted Lovely boxes. You have great pride in your work & it sure shows :) Thumbs up From "Downunder" Aust. Well done Mate :)
Lovely work. Nice to see a craftsman at work 😊
Very rare to see this kind of quality ! 👏👍😀