Brilliant idea from a car jack! Super useful tool!
2021 ж. 30 Сәу.
10 215 175 Рет қаралды
Мой Яндекс Дзен zen.yandex.ru/id/622e544347d0...
Brilliant idea from a car jack! Super useful tool!
I welcome everyone to my channel! My name is Dima - I'm the author of the Men's Craft channel.
I am fond of tools, as well as doing unique things which cannot be bought in the store.
Subscribe to the channel, it’s really interesting here !!!
#craft #wood #diy
This is one of those projects you have to measure, time, and cost vs. buying some clamps. I’ll go with buying clamps. Especially the pipe clamps. They are cheap enough.
Oh dear...
I inherited several pipe clamps from my father-in-law. Nice little project, but nothing I need.
Видео нужно назвать как испортить домкрат. Это называется столярные кустарные ваймы. Для этого есть настоящие силовые ваймы, которые жмут боксы и доски, это просто для видео сделано, для мелко кустарного производства.
As an old grease-monkey, I have a few old scissor jacks just kicking around. I have just built my new woodwork shop, and your video has given me a lot of ideas as to how to put them to use.
I love saving my time and skipping to the end to see what it's for.
I was looking up diy lawn mower jacks and I thought this was the video I needed 🤦🏿♂️ went to the end and saved my 8 minutes.
Yeah, I watched the whole video only to find out at the end that I actually wasn't making a jungle gym! At least now I have a clever board-gluer-drying-clamp thingy like I never imagined I would ever own!
And here i am still stranded on the side of the highway trying to figure out how to use this thing...
I wish I had done that first.
@@SeeGee70 , Only to find out you have to take it completely apart to jack up your car to change the tire. The worst part is that I threw away the tire iron, thinking I didn't need it because the video didn't show it being used. Be a Bro, and call a tow truck, if you don't mind.....thanks.
С таким набором специального инструмента надо заниматься чем-то полезным, а не снимать саморекламу
Во первых, с таким набором инструмента можно было приобрести и готовый винтовой пресс с большим набором функций!
Это не самореклама, а реклама инструментов: вот посмотрите какая циркулярка, а какие струбцины, а какая ножовка и т.д.
It would be a good idea to show what you're trying to achieve at the beginning to avoid us wasting time.
Yeah I just skipped to the end to see what it was going to be, wasn't arsed in the building of it.
@@Chrissykes78 Same here.
It’s perfect as it is. I was totally fascinated by the progress. It made my brain really work. What is he making??? Great fun. Definitely not any waste of time. 👍
For anyone seeing this before watching, jump to 7:44 to see that it's a wood working clamp.
Stfu, ur comment was a waste of time!
Штука то может и нужная, для тех кто столярными работами занят, однако это не стоит времени потраченного на просмотр, даже с тем что я тупо включил видео за полминуты до конца.
Repent to Jesus Christ! “All Scripture is God-breathed and is useful for teaching, rebuking, correcting and training in righteousness,” 2 Timothy 3:16 NIV B
Я тоже как и многие смотрю всегда с конца, чтобы не потерять время на бесполезные сюрпризы.
С объявления не понял что Оно предлагает. Подобная фиговина, с гидравлическим домкратом и металлической рамой и большим набором функций, стоит у моего отца в гараже (мне 70) и изготовлена в хрен знает в каком году. Называется "рамный пресс". Это в Куеве. В Сибири не знаю.
Great imagination for use of an old car jack. You kept us waiting until the end so see what was the end project. Good job!
In stead of 50 hours making that, you can buy clamps already made for $12.00. They work great!
LOL, Right
50 hours? Video was about re using an old jack, right?
About as useful as a three legged stool.
Literal lol. Danka
@@jethrom8702 had you said two legged stool I might have agreed with you but three legged stools are very useful as they are inherently stable.
Buenísima herramienta para múltiples tareas en mi taller ahora mismo voy a fabricar la mía 😊
malaking tulong po pala itong crocodile jack na ito,by the way maraming salamat po sa pagseshare this video keep safe always God Bless
I think the way to evaluate this is to think of the final product as a special jig, to be used where there is a lot of repetitive work producing wide boards. But if it's for casual use, I would agree with a lot of the comments that there are perfectly ordinary ways to accomplish the same thing using conventional general purpose tools. This avoids the need to store a rather bulky jig and avoids having to wreck a perfectly good jack. In particular I agree with BeachSideHank that there is a danger of what I would call buckling, and what he calls cupping ? This happened to me decades ago when building a two piece top in oak for a refectory table in the old style. They did buckle, but for some unknown reason over period of months relaxed and the table top came flat.
Oi Herra
Чтобы один разок склеить такой небольшой щит можно его и так домкратом поджать между двумя какими угодно упорами. И домкрат не портить. А для профессиональной работы, видимо, существует профессиональный инструмент.
Он просто больной на голову
Это называется смотрите сколько у меня игрушек, что то не хватало в детстве
Заняться нечем
Thats impressive. That jack can be used for so many purposes. Its a simple expansion design but can carry a lot of weight and pressure. I do own one and I put it to many uses except for raising my vehicles :-)
Good idea for those who work with wood projects.
Wow...a lot of camera angles. As much work goes into the filming and editing as the actual work itself. This guy really knows how to make a video! Thanks, Men's Craft
Если бы у меня было столько струбцин, то я может быть был добрее. :)
😂😂😂
Похоже магазин обворовал.
😂😂 переигрывая "Простоквашино" : - почему я вредный ? Птамушта у меня струбцин не было ! Вот накуплю , положу в гараже - домой приходишь , а они ждут на полочке , все 34 штуки !!! 😂😂
@@user-ld7uj7kf5p :)
who else thought this was going to be about how to improve a car jack? but this person actually found a better use for it. Those jacks are a piece of junk for it's intended use.
Super Clamp! Awesome!
Glad to try for you
結局、最後にできたの何？
接着剤が乾くまで押さえる道具ってことかな？
@@user-ol9uy7pe1d なるほどー、万力ってことね 一家に１台必需品だねｗ
@@user-nh8wt2ur4i いやw そんなにいらんでしょw DIYするならってことだね
Сделано хорошо. Но разве нельзя назвать большие тиски?) А не супер шикарная идея?
Нет, нет и ыще раз Нет! Сия конструкция, -, Шупер шикарная ыдея.
нет... это же прЕспособление!!! да еще и шикарное
Gute Sache. Saubere Arbeit.
I hate it when another guy is as good on the tools as myself!!! I have to admit, the Dude has some serious talent!!!
Во первых, нужно с объявления говорить о том что предлагаешь! Во вторых, что такое винтовой пресс и как им пользоваться меня учили ещё на уроках труда в Советской Средней Школе!
По существу замечания полностью поддерживаю и название с описанием должны отражать суть несомой роликом информации, а не нагонять туман, это во-первых. ☝️ В школе учили видимо давно и русский язык надо бы немного повторить, а то не солидно как-то взрослым дядькам, хотя и не меняет сути изложенного, это во-вторых. 😉 Сам имею пару таких домкратов для домашних дел, хоть и безлошадный. Тема использования зачётная.
Buying long clamps would be a lot easier.
My very first thought when I saw the video LOL
The winters are very long for this guy ............... 8 minutes of life wasted serves as a lesson to us all. At least he doesn't talk or live next door. It makes watching paint dry seem an attractive hobby.
You don't have to be here you know.....
@@rawx485 At least Lily had a sense of humour. Probably better legs too. I was just looking to find a new hobby but I'll stick to what I know. Watching paint dry is after all really fascinating. That and being trolled by keyboard worriers with made up names .......
Brilliant Idea is a gross overstatement !
К авторам: вы бы начинали с готового изделия, люди бы время не теряли. Клянусь , полчаса смотрел, так и не понял, что это и как оно мне в жизни поможет .
Так ещё прежде чем сделать это изделие-нужно сначала купить мастерскую со всем необходимым оборудованием!!!
В жизни ещё как поможет. Смотрите ролики за 1-2 минуты до их окончания. Реально, время экономит.
Seni ilgilendirmez zaten. Marangoza göre kolaylık.
Хорошо что не 20 плашек отпиливал. А то так и жизнь пройдёт.
А что это в итоге ?? Я так и не понял
I think buying two or three Jorgensen clamps would be much easier. Nice assembly
You get a much wider clamping area with this compared to jorgensens and its cheaper by far to make than 3 decent clamps of similar force capacity.
@@shadowbanned5164 House is much wider you’re fixed with this thing versus Jorgensen‘s can go across a huge span. I’ll stick with Jorgensen‘s much more flexible.
@@shadowbanned5164 you are limited by the distance that the jack's bearing surface can travel along it's drive screw. A pipe clamp is only limited by the length of pipe. I keep several different lengths of pipe clamp pipes in my shop.
@@jungleno. You dont need a lot of clamping movement with this set up you can make it as long as you like thats what all the holes are for the end is adjustable you have all those pipe clamps this setup will do the work of all of them
I made a shoulder vise with one of those jacks a couple years ago, works great!
Thanks for the comment and watching our video!
Good idea👍👍👍
Possibly the greatest video ever
Clever! Great use of an old car jack. Mahalo for sharing! : )
Thank you! Glad to be of service to you!
@@menscraft7985 ^&^&0^&^&^&^&^&&ц в в цв увы в&&&&&&
That doesn’t look like an old car jack. It looks like the one Harbor Freight sells.
As a pipefitter I take my Jack weld a plate on the top and use it as a flange alignment tool you put the flange on the pipe put the Jack inside jack it out and it perfectly takes the hi-lo out of the flange plus holds it up while you tack it!
I just had 2 bongs and I understood you . before that ....
good job beautiful idea
Believe it or not, that's exactly what I had in mind. It's great to see it come to fruition here.
I swapped out 2 wheels on my tool cabinet (replaced fixed with swivel), I used my 2 car jacks to elevate the cabinet, worked great. On another occasion I tried to use a car Jack to pull out some deep roots from a stump near a concrete base, but didn’t work. So yes you can use a car Jack for somethings and not for other things lol
If you wish to use a jack to lift up roots, I use a farm jack. But even that has its limitations. Great for up to 3" diameter 'saplings' provided... you have a good base to set it on, have the jack secured to a secure larger tree or even a vehicle with a chain (& possibly another person to pull or push back keeping it upright when it begins to shift and you're still jacking..) Many Tap roots, as on the sumac, go straight down and the older the tree, the thicker & deeper it goes so it's best to take out asap. Otherwise they may snap in two, and you may need to repeat in a few years. I once experimented using an engine lift with a wench. Again, a 2' or so sapling, ok. Wench could not handle bigger ones better than the farm jack. Maybe a heavier wench?
Amazing...Im using a power drill for that jack now whenever I need to change a tire.
Welcome to the party!
@@stoker20 _ئشئ؟
Your drill better be the plug in drill; ain't raising an average size car up off the ground with a 20Amp Cordless drill
@@JoeSmith-ev2bg I use special grease! LOL. I have a floor jack for my truck. I get a lot of use out of the one with my drill if you need to take a wheel off or get a jack stand in.
Прикольно замутил,сначала подумал,что очередной стол для фрезера будет
Excellent 👌👍👏👏👏🍺
Thanks, I make a lot of cutting boards so I can use this tool. By the way I find I learn by watching your videos and don't make as much mistakes where I do things out of order, and then have to re-do stuff at times. So thanks for that too.
Incredible...to anyone who has never seen a pipe clamp.
Exactly!
A clever clamp. A slightly different arrangement might get you a useable bench vice.
Hope you don't get a flat tire on the way to buy a new jack...
I made a chess board a few years ago, and all those clamps were a pain...your idea is awesome!!
Простому человеку это не надо совсем. А профессионалы столяры имеют настоящие струбцины для щитов. Испортил домкрат, надо назвать видос.
@@manuelester7420 The poor have to think about food.
@@manuelester7420 I'm not poor.
Чем испортил конкретно?
I like it. Might have made the center block about an 1/8 “ shorter to compensate for the slight bow of the 1X3’s or whatever the width is. Good job!
Thank you for appreciating my work, yes your advice has its place
Ideia genial parabéns
Seen this done it's so easy! Congratulations! Brilliant!
"Saw"
@@kirbylee57 Thanks.
Nice. But in the time to make that, I could have gone out & bought a set of cheap sash cramps.
That’s just means more time spent with your wife....
I disconnect when they get to the saw bench, lathe, tig welder...like the ones I don't have.
Exactly....What a waste of time.
合わせ木を作れますよ、ってことですか？
Screw clamp made outta a carjack. SuperLow Tech
who would have thought 2 wedges used by the Egyptians would work just as good after all this time
I have accomplished the same by blocking the ends of the table with 2 by 4 and using two long clamps what a waste of time even watching this
i m impressed...good job...
Clever idea but what about addressing upwards or bowing of the boards being glued when compressed.
It's 5 ply, contained with a lot of clamps.
Could place a weight of some kind on top
No-brainer - just apply flat weight.
Use biscuits
Клёвая идея! Спасибо что поделился 👍
Well, I have to admit, it was fun to watch, the suspense was killing me, but then I thought....waitaminute WAITAMINUTE! The same exact thing could be accomplished by using a couple pipe clamps, and the lengths could be even MORE versatile, and accomplish the very same thing. I dunno, that's just my opinion.
Yes, there are probably thousands of options on how to make a clamp, I just shared one of them
8 minutes too long.😢
А вы молодец очень было полезное видео для меня
When glueing planks together to form a board I use two lengths of cord to hold the planks tightly in place with each other and prevent them from bowing by weights on two strips of wood resting perpendicular on the glued planks.
Traducir al español
@@estebanlara7212 Puede hacerlo usted mismo utilizando el traductor de Google.
最後に出来上がったものが、何の道具になったのか全くわかりません。
万力って言うのかなぁ？(圧力かける道具)の代用じゃないですか？
同意。 なんで使用方法見せないのか。 これがなんなのか分からんので、「なに」に対して便利なんだ
最後に使用方法見せてる。板をつなぎ合わせる時に使う道具。
This is for people with a lot of time on their hands and no pipe clamps.
Good thinking..I am making one.
It is videos like these that answer the question “how did I waste so many precious hours of my life watching useless videos on KZhead. I always think it’s going to be some amazing tool and then it ends up being an hour or more worth of work to make a basic custom wood clamp out of a car jack. 😑
Thanks ! I just headed right to the comments.
You can always fast forward. Same result, less time wasted
Thanks dude you saved my time.
I just fast forward it to the end.
I'm a carpenter and know how hard it is to clamp stuff together especially if you've not got a big workshop and good quality clamps. This is a great and cheap option.
All those brilliant carpenters so proud of pointing out the obvious . I'll say...Cant, you appreciate the genius of these inventions?
11
Ow sure we all got all the machinery to do that/ and time/ most people have to Work
Simply B R I L L I A N T!!!
good build thanks for sharing
Здравствуйте, а что у вас за карандаш такой?
You’re brilliant
Thought about using them for direct stick timber flooring , ie using them as flooring cramps/clapms/dogs whatever they are currently called. Peace.
Wow i was using that same exact idea when i was 20 years old, i'm now 46. It's the best way to spread weight on a vehicle when jacking it up.
Good idea for 20 years
WoW! Very nice. That's about a $1500 clamp press with the wood prices as they are these days! 😞
I feared I’d be seeing another router lift video, lol. But that jack-clamp would be super useful. I plan to make one asap. Awesome project 🥇
Finally! Something actually useful built from stuff lying around.
The way to avoid time wasters is to flick forward to the end and see where it is going - then if it is of interest watch the padded out video,
Yes, it’s allowed to do this, you won’t break the law by rewinding to the end of the video)))
Так и не понял! Для чего сломали домкрат?
Не досмотрел а для чего..
Ролик:" Как испортить домкрат", потеряв кучу времени..
Bonjour Je trouve votre outil sensationnel. Je pense que je vais me fabriquer le même. Un grand merci Luc de France I find your tool sensational. I think I'm going to make myself the same. A big thank-you Luke of France
Beautiful project . GREAT JOB .
40 years of wood working and this ignores the need to hold slats or planks flat. There will be play in the wood and mechanical restraints allowing the assembly to bow when tightened. It's an expensive DIY when there are purpose made clamps on the market too. Sorry, but no.
I use my car jack with a piece of flat wood fixed to it to position radiators to a wall 👍
I have used a pair of scissor Jack's to set as many as five upper cabinets at a time. Worked perfect. Have had it many years.
Legal, muito criativo, didático e funcional.
Was wondering where you were going with that right to the end. Nice! 👍👍
I feel like ive just been robbed of 😳I'll never get that time spent watching this video back.. don't be like, save yourself. Run away
Same thing here. I kept skipping forwards every 10 seconds. In the end, it's a lot of effort and time wasted when you can simply buy super long clamps. Not worth the time and materials.
Play vids at 2x speed. Shortens the agony.
That's why I see comments first.
I legit have everything i need to make this already, but no money to buy a longer clamp. This video is super helpful
Some of the comments here are plain ridiculous and missing the point completely. If you don't like it, jog on. It's not about being easy to just buy bar clamps and saving the hassle of making this. It's actually, believe it or not, about MAKING this! Everyone has wood lying about doing nothing and most probably many have a spare jack lying about too so why not spend a wee bit of time making something for free instead of being a lazy, moaning bastard with no imagination?
Its like a bench vice without a bench attached to it. This isn't going to convince me to stop using pipe clamps.
Можно просто между стен в узком коридоре прижать... 😁 А инструмент у тебя хороший! 👍
I suppose it had to happen eventually, an actual, good, practical idea from one of these sort of videos!
Il00
0l0ko
Pl09ooulo9l0o0m
Like your tool collection. Nice idea for woodworking. One suggestion: when you first use a glue or teak oil, show the label, so we know what it is.
Yes! I would like to know where I can get the wide hand saw. The first one he used with the red handle! It looked durable and I am a bit hard on my tools and it looked like it might last.
Simply Brilliant!!!
Nota,,, excelente,,,,,, sabiduría 😊
I like the idea of using a power driver to tighten the device...
You need to be careful though with the driver, the over excitement could send those panels flying. Sometimes I need to lift my heavy bed to place sliders underneath and that 600lbs bed corner can be lifted using this jack while tightening with fingers.
When gluing panels, it's important to equalize the pressure on both sides to prevent cupping, this method has no means to do that.
@Neal Zalagens Even a few degrees off of square on the adjacent planed edges creates a ramp or wedge, which will translate into surface unevenness as the joints move apart under pressure, panel clamps sit astride both surfaces and greatly reduce or eliminate entirely this effect.
Remember the 3rd law of Newton
Also lacks vertical downward force. Word floor installation basics.
@@juancarlosvr is that the one about keeping the Sabbath holy, or the one about not quartering soldiers? I always get confused on that one
@@MarcillaSmith @Marcilla Smith haha 😅😑 I have exactly the same car jack, the guy share his idea and is silly to say that it doesn't work when it does work for him
Good idea for adjustable clamps for various projects.👍
That's a cool saw
That has clamping power like no other! It's a very powerful clamp in deed!
I used a jack like that to free a child that got his head stuck in some railings.
Where did you get your bench square? I bought one probably 20-25 years ago and didn’t realize it isn’t square until I had had it quite a while. Now they are hard to find
VERY GOOD THINKING. I WILL MAKE THESE JACK CLAMPS FOR MY FUTURE GLUEING. THANKYOU FOR THE VEDEO.
Needs greater precision. Even with a small amount of pressure, I can see that the fixed bar goes out of square. Consequently the boards will be subjected to vertical bending. Be very careful about applying too much force, otherwise you may have boards exploding all over the workshop.