KZhead
Автокөліктер мен көлік құралдары

Ash's 1HZ Turbo Toyota Landcruiser HZJ75 Setup | Dyno Results!

Hayden
2024 ж. 13 Мам.
10 595 Рет қаралды
Жүктеу

Today we do a full rundown on Ash's tidy 1HZ HZJ75 Series Toyota Landcruiser fitted with one of our aftermarket turbocharger kits. This 70 Series came fitted with a naturally aspirated engine from factory, with the fitment of the turbo kit, we have been able to significantly increase the power of the 1HZ. This has been done with safety and longevity in mind to maintain the renowned Toyota reliability.

Пікірлер

  • Hayden is so much more than good looks, absolute wizard of oz (tuning wise)

    @danielcrump5615@danielcrump56153 ай бұрын

    • Fuel screw wizard

      @hd_hayden@hd_hayden3 ай бұрын

  • Just finished fitting a HD kit to my 105 series 1hz. Going to give it its first run tomorrow. When i had questions about the kit and exhaust you guys were very helpful. Thanks again.

    @grunkalunka3449@grunkalunka34493 ай бұрын

    • I’m really glad to hear we could help you out mate, thank you! Let us know how you go with your first run!

      @hd_hayden@hd_hayden3 ай бұрын

    • @@hd_hayden Hi Hayden, first impressions after first run. Very happy. Notable increase in power through all gears. Thats with your ct26 turbo kit, a 3" system with a hotdog, and 1/8 of turn on the inj pump. Once i fit a boost / egt gauge, i may turn the fuel up a fraction more. All in all, very happy with it. Thanks.

      @grunkalunka3449@grunkalunka34493 ай бұрын

    • @@grunkalunka3449Thanks for the feedback mate, that’s awesome to hear you’re enjoying it

      @hd_hayden@hd_hayden3 ай бұрын

  • No intercooler needed? nice results 🎉

    @mt72@mt72Ай бұрын

  • hello I need help please I want to put a turbo on my 1hz but I have read that the pistons crack, others say that the turbo will work. As a specialist, what do you recommend I do? And what basic steps should I take? thank you

    @franzpatino1467@franzpatino1467Ай бұрын

  • Interesting. Is this Arashi turbo support water cooling?

    @1hdt@1hdtАй бұрын

  • Is standard exhaust compatible or does it need upgraded

    @MichaelMcfarland-yh3kv@MichaelMcfarland-yh3kvАй бұрын

  • Hi Ash, what is the exact spec /nameof this turbo upgrade kit. Does it include intercooler? I want to do this on my 1HZ motor in my 100 series cruiser.

    @nicholasjames9427@nicholasjames94279 күн бұрын

  • I have a freshly built 1hz with fte rods, ceramic coated pistons, 12mm boost compensated pump, hi flow ct26, 3inch exhaust. I still need to put a front mount on it. What do you think a safe target power would be?

    @Jack20585@Jack205852 ай бұрын

    • Hey mate There’s too many unknowns here. What brand ct26? There’s so many brands that are “highflow” that I wouldn’t recommend anyone go near what so ever Who built the time and how also plays a massive factor in it as 90% of 12mm pumps for a 1HZ are not build by performance shops and just some standard diesel shop having a crack at increasing the fueling on a stock pump. There’s more to just throwing more fuel at these things that needs to be done to keep them alive

      @hd_hayden@hd_hayden2 ай бұрын

    • @hd_hayden cheers for the detailed reply mate! Engine was built by Oscar mechanic in Perth. He seems really good but his not my mechanic. Big on only using Toyota genuine parts when rebuilding an engine. Seems like %90 of what he does is hz, hd t and hd ftes ect. He would have sourced the pump and turbo. I understand that those are unknowns but assuming a quality pump and ct26. What is the SAFE limit to an inter cooled 1hz with ceramic pistons in your opinion. Ie assuming supporting mods are good what can the engine safely handle. I have searched hi and low but it's hard to actually find an expert having a detailed discussion on the ins and outs of a turbo hz.

      @Jack20585@Jack205852 ай бұрын

  • If I use this kit on my 80 series can I use a 1hdt 80 series exhaust? Will all the exhaust hanger mounts be in the same place ?

    @kaydenCarins9386@kaydenCarins93863 ай бұрын

    • Correct mate!

      @hd_hayden@hd_hayden3 ай бұрын

  • So that 1hz is making roughly the same power and torque as a stock vdj79? 138hp/103kw and 350nm is roughly what I have seen on other videos with stock 79s.

    @lucashurst4191@lucashurst41913 ай бұрын

    • Correct, which is what’s so awesome about these kits and how they perform

      @hd_hayden@hd_hayden3 ай бұрын

    • @@hd_hayden can the stock trans handle the extra torque?

      @lucashurst4191@lucashurst41913 ай бұрын

    • @@lucashurst4191 yes it definitely can

      @hd_hayden@hd_hayden3 ай бұрын

  • Can these run on just oil or does the water cooling need to be hooked up too?

    @Shaanjc96@Shaanjc963 ай бұрын

    • Just oil is fine!

      @hd_hayden@hd_hayden3 ай бұрын

    • Legend! I need to replace my JB CT26 turbo before it does what they’re known to do and I’m liking the sound of these Arashi’s. When does peak boost come on? Also do you guys sell these turbos separately? Cheers Hayden

      @Shaanjc96@Shaanjc963 ай бұрын

  • how far have you pushed a 1hz before with arp headstuds ? or just in general do you think theres a line where you cant go any further

    @kylepartanen3289@kylepartanen32893 ай бұрын

    • 287hp mate, still going no issues! I’d love to do a 300hp 1HZ

      @hd_hayden@hd_hayden3 ай бұрын

    • @@hd_hayden what NM ?

      @kylepartanen3289@kylepartanen32893 ай бұрын

    • @@kylepartanen3289 700nm mate

      @hd_hayden@hd_hayden3 ай бұрын

    • @@hd_hayden How long do you expect it to last?

      @lucashurst4191@lucashurst41913 ай бұрын

    • @@lucashurst4191 how longs a piece a string mate 🤷‍♂️

      @hd_hayden@hd_hayden3 ай бұрын

  • Do u make turbo kits for the 3.4 3b Toyota engine

    @ajoflo3352@ajoflo33523 ай бұрын

    • We don’t have any manifolds for a 3B sorry but we do have turbos!

      @hd_hayden@hd_hayden3 ай бұрын

    • @@hd_hayden how can I order a turbo from you ?

      @ajoflo3352@ajoflo33523 ай бұрын

  • Do you have a link where I can get one of these kits?

    @harrywatts9370@harrywatts93702 ай бұрын

    • hdautomotive.com.au/product/landcruiser-1hz-turbo-kit/

      @hd_hayden@hd_haydenАй бұрын

  • Do u do a kit for the 2h?

    @chrissteer3733@chrissteer37333 ай бұрын

    • Not yet sorry

      @hd_hayden@hd_hayden3 ай бұрын

    • @@hd_hayden if u want a test vehicle!

      @chrissteer3733@chrissteer37333 ай бұрын

  • Where can i buy your kits?

    @andrewlatham1410@andrewlatham14103 ай бұрын

    • They’re available on our website mate HDAutomotive.com.au

      @hd_hayden@hd_hayden3 ай бұрын

  • td42

    @clarence302@clarence3023 ай бұрын

    • Coming soon 😎

      @hd_hayden@hd_hayden3 ай бұрын

  • For some reason, I read "1HZ" as "1JZ" and thought you swapped a competent I6 into these turds 😅 (turd as in, slow, not as in the truck sucks, I love Land Cruisers and wish we got more of them in the States, we never get anything good 😖)

    @johnnygeorgopoulos4072@johnnygeorgopoulos40723 ай бұрын

    • 😂😂 the sad part is it’s been done!

      @hd_hayden@hd_hayden3 ай бұрын

  • Why buy a 1hz if you want to make it less reliable. Go for a v8

    @Sl_king213@Sl_king2132 ай бұрын

    • This doesn't make it any less reliable mate

      @hd_hayden@hd_haydenАй бұрын
KZhead