KZhead
Тәжірибелік нұсқаулар және стиль

not all welders are willing to tell you this trick

Handy Welder
2024 ж. 10 Ақп.
60 817 052 Рет қаралды
Жүктеу

Пікірлер

  • Only a welder would think basic geometry is a "trick" lol

    @MrDankDro@MrDankDro2 ай бұрын

    • *only a youtube "welder"* dude doesn't even know how to use a speedsquare lol

      @Gu1tarZer0@Gu1tarZer02 ай бұрын

    • The keyword 'speed' there seems to have yet dawned on our backyard welders. They may not be fast but they're sure proud of their work! 😂

      @ipickedsomething@ipickedsomething2 ай бұрын

    • Not to worry; this guy ain't no welder anyway

      @oliverklozhoff@oliverklozhoff2 ай бұрын

    • Like they invented the idea of 45 degrees 😂😂😂

      @Playingwithproxies@Playingwithproxies2 ай бұрын

    • Welders are smarter than that. This guys is sus

      @christopherparks2987@christopherparks29872 ай бұрын

  • Congratulations, you just passed middle school geometry

    @joebuckley2180@joebuckley21802 ай бұрын

    • Trigonometry! This is angles. Congrats, you just passed as well. 😂

      @TheNarrowPath84@TheNarrowPath84Ай бұрын

    • ​@@TheNarrowPath84 Really makes me wonder what trigonometry is a subset of then! Congratulations to you as well.

      @kibukaj2956@kibukaj2956Ай бұрын

    • ​@@kibukaj2956ya know I could say your wrong too but I don't wanna be confidently incorrect so I'm just gonna say that this is just basic knowledge lol

      @kash_KIA@kash_KIAАй бұрын

    • @@kash_KIA im never wrong 😎😎

      @kibukaj2956@kibukaj2956Ай бұрын

    • @@TheNarrowPath84 no angles at all: just squares wid diagonal dividing it into 2 right triangles.

      @QwDragon@QwDragonАй бұрын

  • wow thank goodness i've never had to make a connection like that in 20 years of fabricating

    @BrianNichol@BrianNichol2 ай бұрын

    • My friend said he was a fabricator but I think he made it up!

      @whetstonemistery@whetstonemistery2 ай бұрын

    • Wow

      @templeosigwe3545@templeosigwe35452 ай бұрын

    • 😂​@@whetstonemistery

      @nym2201@nym22012 ай бұрын

    • Exactly lol

      @andrewaceves4561@andrewaceves45612 ай бұрын

    • He should let 1 angle bar go through between 2 angle bars. I dunno how to explain because of my english. Do I correct?

      @fs6783@fs67832 ай бұрын

  • You only have to cut two to make it a more solid connection 😂

    @joshuawoodbridge6267@joshuawoodbridge6267Ай бұрын

    • Been a toolmaker for 40 yrs, "Why the heck did he cut 4 pieces.?"

      @kwkstar@kwkstarАй бұрын

    • ​@@kwkstar: I don't know, but it looks awful flimsy to me, unless it is for decoration.

      @brianlanders8028@brianlanders8028Ай бұрын

    • ​@@kwkstarab olut ly biN5 it would b u there are cjn mounting Arfimljt the i m I will kv I Gj4mt

      @user-fd5yc1ds4d@user-fd5yc1ds4dАй бұрын

    • Hlo t2klow tiolman the card for vkf c ouk b u ❤️ e frl ff ktkv2k ...m in ifak the Hom n5v

      @user-fd5yc1ds4d@user-fd5yc1ds4dАй бұрын

    • ​@@kwkstarfluk b h2 the 4to mount r jtfak kit and avjbtcn the urak the aho b clil n 🌎 g2rgw f the t tti4

      @user-fd5yc1ds4d@user-fd5yc1ds4dАй бұрын

  • The ruler being completely misused is my favorite part of it. Might as well use a random piece of metal if you ain’t gonna measure.😂

    @quitscheente95@quitscheente952 ай бұрын

    • Only the first mark was necessary, and yet it got marked twice.

      @OtakuUnitedStudio@OtakuUnitedStudioАй бұрын

    • He unnecessarily put permanent marker on ruler 😂😂. And what was that second mark for?😂😂

      @estebanrivera1227@estebanrivera1227Ай бұрын

    • @@OtakuUnitedStudio No mark necessary at all, just read the markings already on it that is what they are there for!

      @phillhuddleston9445@phillhuddleston9445Ай бұрын

  • You could just use one straight through and cut the other on angles... would be stronger.

    @jongrier5093@jongrier50933 ай бұрын

    • The welded points are stronger than the original metal if done properly, so no it's not, and also geometry.

      @bahamutzero4903@bahamutzero49032 ай бұрын

    • ​@bahamutzero4903 if it's stronger than the original then wouldn't his point still stand? Now you've got 1 solid bar and only 2 extra strength welds. Saved time and its most likely stronger too since you can put more effort into the side pieces than all of em.

      @denjientertainmentinc.5941@denjientertainmentinc.59412 ай бұрын

    • Isso mesmo.

      @bonnysilva1423@bonnysilva14232 ай бұрын

    • Welding isnt carpentry. The welds are stronger than the material itself.

      @SylvanasWindrunnerResurrected@SylvanasWindrunnerResurrected2 ай бұрын

    • Exactly..

      @vaisakhv125@vaisakhv1252 ай бұрын

  • Welders don't do that because it's much easier and faster to do one single 45° cut on each piece , on a saw , accurately, with measurements. And then the other ends of your steel angle don't end up short or long and cost you even more time

    @dangleebals6746@dangleebals67462 ай бұрын

    • So basically coping them like trim?

      @colton6779@colton6779Ай бұрын

    • Stack the four pieces and make two cuts. Time is money to a good welder.

      @rgdutch22@rgdutch22Ай бұрын

  • Not all welders would call this a trick.

    @chrisminblkdiamond@chrisminblkdiamond2 ай бұрын

    • Correction; no welder would call this a trick…..😮

      @nonhatespeech@nonhatespeech2 ай бұрын

    • @@nonhatespeech I've been told by some people that they can weld and are welders....

      @chrisminblkdiamond@chrisminblkdiamond2 ай бұрын

    • I think no trick will call this a welder also😂😂😂

      @gilbertocruz3448@gilbertocruz34482 ай бұрын

    • Just common sense...

      @oliveringram3056@oliveringram30562 ай бұрын

    • Not all welders would call this welder a welder

      @twite5462@twite5462Ай бұрын

  • This youtube channel should be called "How to do everything the hardest possible way"

    @ZlatkoLon@ZlatkoLon2 ай бұрын

    • Like "common core fabrication".

      @edwardpadgett8595@edwardpadgett85952 ай бұрын

    • Haha thats right

      @spikeweb5193@spikeweb51932 ай бұрын

    • like marking the very scale,☆;

      @charlesgeorge8111@charlesgeorge8111Ай бұрын

    • Actual curiosity cuz I don’t do this kind of work and it seemed fine to me, but what would be easier to do than something like this to fix the aligning issue?

      @AzarathMetreon@AzarathMetreonАй бұрын

    • ​@@AzarathMetreonI think it's be stronger to no cut one piece and only cut two at the 45 degrees angel. though I am not a welder just a swimmer.

      @kylekelly1167@kylekelly1167Ай бұрын

  • I'm glad he tried to put them together so many different ways

    @heldtoahigherstandard5915@heldtoahigherstandard59152 ай бұрын

    • Yeah that was so frustrating to me. I looked for this comment and now blocking the channel

      @KAJlogic@KAJlogic2 ай бұрын

    • There might have been ways! But as it turns out, there are no ways. ...until now...

      @cannaroe1213@cannaroe12132 ай бұрын

    • Nice

      @ombirrohilla1473@ombirrohilla14732 ай бұрын

    • The most important part is waving his finger.

      @Elfcheg@Elfcheg2 ай бұрын

    • That's just him proving he still has that finger left​@@Elfcheg

      @Pedro90X@Pedro90X2 ай бұрын

  • A welder wouldn’t tell you because he’d expect you can figure out something as simple as this on your own

    @connorrekdahl3754@connorrekdahl3754Ай бұрын

    • Простое? А теперь представьте, что таких соединений надо сделать 50 штук...

      @user-tu8ne7wj5x@user-tu8ne7wj5x16 күн бұрын

  • I have absolutely zero experience in welding, but the welding community on KZhead shorts is absolutely the best no matter what a person does good or bad somebody always has something to say differently, which is awesome. 😂😂😂 and so funny

    @palmbeachgrown5125@palmbeachgrown51252 ай бұрын

    • Reading the comments is good fun

      @QuickBread@QuickBread2 ай бұрын

    • Tungsten rod stick measure contest😂😂😂😂😂😂

      @kickazz9473@kickazz94732 ай бұрын

    • 8

      @yayyayayoyiy3154@yayyayayoyiy31542 ай бұрын

    • That's the world of skilled trades.

      @armorers_wrench@armorers_wrench2 ай бұрын

    • Nah this guy making the videos is just a moron, bad 'tips' and shit nobody would ever need or will ever use in fabrication.

      @windchiller6951@windchiller69512 ай бұрын

  • How to mess up your steel ruler instead of using a piece of paper for a simple job 👏

    @alexp7274@alexp72742 ай бұрын

    • How is this messing up the ruler?

      @HomeVidEdd@HomeVidEddАй бұрын

    • by just marking it ​,☆;

      @charlesgeorge8111@charlesgeorge8111Ай бұрын

  • Trysqure is one of the very first basic layout tools. No measuring, no thinking, just mark your 45's and crack on.

    @namarhodge568@namarhodge5683 ай бұрын

    • Внезапно оказалось: arccos(x) в градусах = 35.2643897

      @user-br6en5lm8p@user-br6en5lm8p2 ай бұрын

    • Could you post this in Russian instead of being insensitive to our Slavik brothers?

      @garystinnett8321@garystinnett83212 ай бұрын

    • @garystinnett8321 Sorry, I do not know how to post in other languages. Lots of website comments have a way to click on a translation link. I do not know how it works. I wish I could help. It would help me sometimes. If there is someone out there that knows how to make translations work, please help us communicate, and thanks so much. May GOD bless you all today.

      @namarhodge568@namarhodge5682 ай бұрын

    • Good job

      @Sunil-cm4bf@Sunil-cm4bf2 ай бұрын

    • ​@@garystinnett8321Trysqure - это один из самых первых базовых инструментов верстки. никаких измерений, никаких размышлений, просто отметьте свои 45 и двигайтесь дальше.

      @stjeep@stjeep2 ай бұрын

  • So it's not a skill issue, it's a brain issue.

    @RobertTheFat@RobertTheFatАй бұрын

  • You've discovered basic geometry.. Congratulations!

    @xthatfedexguy6964@xthatfedexguy69642 ай бұрын

  • They have speed squares for this, but nobody would weld four angle irons together like that.

    @1975KyleDavid@1975KyleDavid2 ай бұрын

  • Достаточно было на двух уголках убрать полки на 45° а уголки в стык сваритьи два наложить по месту стыка прочнее узел и меньше обрезков😅

    @HIPS-ww4ib@HIPS-ww4ib3 ай бұрын

    • Лёгких путей не ищет

      @fedorov_petr@fedorov_petr3 ай бұрын

    • Vou acreditar que ele não tinha uma peça maior...😂

      @edmilsonfidelis3073@edmilsonfidelis30733 ай бұрын

    • 🤣🤣🤣👍

      @danl.4743@danl.47433 ай бұрын

    • Ты ничего не шаришь в эстетике 😅

      @TheVit3@TheVit33 ай бұрын

    • Поддерживаю🖐️

      @user-qr8tc8ce9b@user-qr8tc8ce9b3 ай бұрын

  • You didnt have to do all that. Measure the end, mark the same measurement up the length, connect the dots. Alternatively, just measure a 45 degree angle

    @loganbrunson521@loganbrunson5212 ай бұрын

  • You have to sacrifice some part of you to adjust with the people around you

    @nospicerecipe72@nospicerecipe722 ай бұрын

  • Просто реж каждую сторону уголка под 45° используя угольник и всё. А линейку оставь для члена. Пользуйся!!!

    @AlexKoles-ce6fr@AlexKoles-ce6fr3 ай бұрын

    • 😂молодец сказал четко

      @user-hn7fp2wh2q@user-hn7fp2wh2q3 ай бұрын

    • @@user-hn7fp2wh2q долго смеялся?

      @AlexKoles-ce6fr@AlexKoles-ce6fr3 ай бұрын

    • Не под45° а под 22,5° и всё получится. Учись?

      @user-sf6nl3zl1y@user-sf6nl3zl1y2 ай бұрын

    • I didn’t expect that translation 😂

      @roobler8923@roobler89232 ай бұрын

    • ​@@user-sf6nl3zl1y45° надо резать

      @temirtemirtemir@temirtemirtemir2 ай бұрын

  • А прсто два уголка обрезать не судьба , надо работы себе добавить . Круто . Мы не ищем легких путей .

    @user-ub8zo1vl8j@user-ub8zo1vl8j3 ай бұрын

    • И при вашем варианте конструкция будет жёще.

      @user-kp1hm3op5n@user-kp1hm3op5n3 ай бұрын

    • Я всю жизнь в строительстве,работал в разных сферах,в том числе на производстве металлоконструкций. Но ни разу не видел подобного,куда оно и зачем?😁

      @farshmeatfriend2220@farshmeatfriend22203 ай бұрын

    • Только хотел написать. Согласен с Вами.

      @user-yx1nm9lh8e@user-yx1nm9lh8e3 ай бұрын

    • Он тем самым ослабил конструкцию!

      @user-gw2lj7nd1j@user-gw2lj7nd1j3 ай бұрын

    • Essa situação me parece inexistente. Se for necessário uma emenda cruzada, fazer os encaixes em 2 peças, basta.

      @valtonionascimento9327@valtonionascimento93273 ай бұрын

  • "Not all welders are willing to tell you this trick" Common sense and geometry : 🍷🗿

    @CR334TUR33@CR334TUR33Ай бұрын

  • Now we know what wolverine been doing in his spare time. Making X's

    @markandrewpaul4233@markandrewpaul4233Ай бұрын

  • Name the circumstance where this joint applies

    @blaphtome9382@blaphtome93823 ай бұрын

    • It would probably only be for something decorative.

      @orange3203@orange32032 ай бұрын

    • When I have nothing to do, I take a welding machine and weld all sorts of useless stuff. Such a connection is simply necessary in my case.

      @HvostVolchii@HvostVolchii2 ай бұрын

    • Always vital when you're welding skyhooks

      @denisoconnell1895@denisoconnell18952 ай бұрын

    • I've seen it used for shipping spiders inside small diameter stacks. But anything bigger than 3' diameter, we'd use square tubing welded to a blank round.

      @definitelyaToxicPanda.@definitelyaToxicPanda.2 ай бұрын

    • Decorative?

      @PauPauPauPauPauPau@PauPauPauPauPauPau2 ай бұрын

  • Thanks for smoothing out that tip so quickly. Kept the ocd at bay.

    @johnnyflashdance3371@johnnyflashdance33713 ай бұрын

    • I like how he eased the tip in. 😏

      @knolez1546@knolez15462 ай бұрын

    • Yeah, that was going to be a problem for me. It’s like I felt sick for a second and he instantly gave me medicine.

      @johnbagewll2321@johnbagewll23212 ай бұрын

  • This is like "only 1% of the people can resolve this" ads

    @criztofen115@criztofen1152 ай бұрын

  • Tanpa kata-kata tapi mudah dipahami.. Terimakasih saudara telah berbagi ilmu

    @lambangpilihanto599@lambangpilihanto5992 ай бұрын

  • Отметить маркером на линейке? А че не на лбу у себя?

    @SanteyGarage@SanteyGarage3 ай бұрын

    • Wkwkwk

      @sagalaayachannel6467@sagalaayachannel64673 ай бұрын

    • Bahut khub lajawab

      @mohammadahamed9648@mohammadahamed96483 ай бұрын

  • Why you tried the other two thinking they were gonna work was wild.

    @reecegraves3738@reecegraves37382 ай бұрын

  • FINALLY, someone who understands kerf when cutting on a line 😭 god bless you

    @Specialgraves14@Specialgraves142 ай бұрын

  • Там можно только 2 подрезать и взять один цыликовый а так это двойная работа

    @user-rs7vy2gs4z@user-rs7vy2gs4z3 ай бұрын

    • Я тоже хотел так написать, но….😊

      @roosh01@roosh012 ай бұрын

    • да и даже крепче соединение выйдет ))

      @Homo_uralensis@Homo_uralensis2 ай бұрын

    • цЫлый?!!!

      @maksichek@maksichek2 ай бұрын

    • @@maksichek да именно так😐

      @user-rs7vy2gs4z@user-rs7vy2gs4z2 ай бұрын

  • Зачем делать лишнюю работу? Достаточно обрезать два уголка.

    @user-jf8gg6qj8r@user-jf8gg6qj8r3 ай бұрын

    • И узел будет крепче😂

      @user-mg6rh4wt8f@user-mg6rh4wt8f3 ай бұрын

    • Это называется смекалка, не всем дано 😄

      @Kreuzritter84@Kreuzritter843 ай бұрын

    • @@Kreuzritter84 если б мне пришлось делать такую крестовину я б точно обрезал два уголка.

      @user-jf8gg6qj8r@user-jf8gg6qj8r3 ай бұрын

    • Для контента, что комментов больше было😜😜😜

      @user-lm4ru9dl1d@user-lm4ru9dl1d2 ай бұрын

  • That's not a trick, that's common sense.

    @EzraBridger167@EzraBridger167Ай бұрын

  • I'm a CNC operator, but I do welding at home as a hobby, your tip was amazing, I learned a lot by watching your short videos. Thank you, from Brazil.

    @ricardortn@ricardortn2 ай бұрын

  • На каждое изделие нужна новая линейка😂

    @user-ts5cu8lp5o@user-ts5cu8lp5o3 ай бұрын

  • Omg. You cut ALL the lengths? That cannot be the way to do it, to rely totally on the weld.

    @chrissalter8342@chrissalter83423 ай бұрын

    • 2 would've done the same thing

      @kieranosullivan02@kieranosullivan023 ай бұрын

    • You're relying on the weld 1 way or another

      @nicknorris100@nicknorris1002 ай бұрын

  • So glad he shook his finger otherwise I would have lost my way.

    @abdomar0528@abdomar05282 ай бұрын

  • My right ear really enjoyed this vid

    @smol_waffles4268@smol_waffles42682 ай бұрын

  • Напишите кому в жизни нужно было стыковать 4 уголка ?

    @user-mo8ry5sv1f@user-mo8ry5sv1f3 ай бұрын

    • Нужно было и больше, просто не в одной плоскости.

      @user-cn5lm1so5k@user-cn5lm1so5k3 ай бұрын

    • Максимум 3

      @user-br6en5lm8p@user-br6en5lm8p2 ай бұрын

  • Fun fact! 45⁰ angles share 2 same lengths to make a 90⁰ angle (which you can see). Next time, simply measure side tip and measure the same at it's length and you'll get your 45⁰ angle cut.

    @cidiotmoments@cidiotmoments3 ай бұрын

    • Muito obrigado 🇧🇷 thank you very much

      @marluslima4709@marluslima47093 ай бұрын

    • ΤΗΝ ΓΩΝΙΑ ΤΟΥ ΣΕΝΤΣ ΤΙ ΒΡΗΚΑΤΕ ΤΙ ΜΕΤΡΑ ΚΑΙ ΤΙ ΡΑΨΕ ΚΑΙ ΚΛΑΨΕ ΜΙΑ ΦΑΛΤΣΟΓΩΝΙΑ ΣΗΜΑΔΕΒΗΣ ΚΑΤΕΥΘΕΙΑΝ 45* ΚΑΙ ΕΤΟΙΜΑ ΟΤΑΝ ΔΕΙΧΝΗΣ ΚΑΤΙ ΜΑΣΤΟΡΑΚΙ ΜΗΝ ΜΠΕΡΔΕΥΗΣ ΤΟΥΣ ΘΕΑΤΕΣ ΣΟΥ ΚΑΙ ΤΑ ΣΗΜΑΔΕΜΑΤΑ ΓΙΝΟΝΤΕ ΜΕ ΠΡΙΝΟΛΑΜΑ ΦΑΛΤΣΕΤΑ ΣΙΜΑΔΕΥΤΗΡΙ ΚΑΙ ΜΟ ΜΟΛΥΒΙ ΣΙΓΑ ΜΗΝ ΒΑΛΗΣ ΚΑΙ ΚΙΜΩΛΙΑ Ε ΜΑ ΚΟΨΤΑ ΣΕ ΕΝΑ ΠΡΙΟΝΙ ΣΤΟ ΦΙΝΑΛΕ ΒΑΛΕ 45 ΝΑ ΤΕΛΕΙΩΝΟΥΜΕ ΑΦΟΥ ΘΕΣ ΟΡΘΗ ΓΩΝΙΑ Η ΣΤΣΥΡΟ ΟΠΩΣ ΕΚΕΙ ΤΟ 90 ΓΙΑ ΝΑ ΒΓΗ ΒΑΖΗΣ 45 ΚΑΤΑΛΑΒΕΣ ΜΘΑ ΦΑΛΤΣΟΓΩΝΙΑ ΚΑΙ ΤΕΛΕΙΩΣΕΣ ΓΙΑΤΙ ΕΓΡΑΨΑ ΠΟΛΛΑ

      @user-ed7ef2tp9o@user-ed7ef2tp9o3 ай бұрын

    • Очень! ну очень позновательное видео))

      @user-mk5ro4hn7m@user-mk5ro4hn7m3 ай бұрын

    • Are you sure it’s a 45° angle? I don’t think it is

      @alankluttz4400@alankluttz44003 ай бұрын

    • what's a side tip

      @n8mail76@n8mail763 ай бұрын

  • When u have a gas cutter in your garage u don't need a grinder...

    @wasimshaikh4133@wasimshaikh4133Ай бұрын

  • That's not a trick. That's common sense.

    @Toby_K@Toby_KАй бұрын

  • Very nice! Personally I use a small chop saw for ends. I bought it to cut piping and with a few jigs it’s turned out to be a real time saver. Thanks guys 🇺🇸👍

    @njosborne6152@njosborne61523 ай бұрын

  • You are helping a lot of people with welding tricks your videos are really informative.

    @colmoprey@colmoprey3 ай бұрын

    • Сам себе написал

      @user-ju3jy1tq7s@user-ju3jy1tq7s3 ай бұрын

    • This is garbage.

      @eckyx9019@eckyx90192 ай бұрын

    • It's great that he is putting out videos.... He is showing people the incorrect methods of welding!

      @brianclark17@brianclark172 ай бұрын

  • 8 cuts instead of 4, pure genius!

    @Antony_Jenner@Antony_JennerАй бұрын

  • Not even a welder and I'd join them this way 😂

    @ThorOdinson1269@ThorOdinson1269Ай бұрын

  • Why bother with cutting all 4? You just need to cut two sides, just gotta keep the material thickness in mind, but the gap makes for a great trough for the weld to go into

    @oBseSsIoNPC@oBseSsIoNPC2 ай бұрын

    • Yaa. I think that thoo

      @aguswidodo6077@aguswidodo60772 ай бұрын

    • That equal distant way he has makes for a longer vid, more people figure what other stupid ways he cuts metal. Most importantly is he gonna weld ever correctly

      @fev3rd@fev3rd2 ай бұрын

    • @@fev3rd I think you are correct. It's not about teaching anything properly anymore, but how to maximize views and engagement. A good reputation doesn't even matter anymore.

      @oBseSsIoNPC@oBseSsIoNPC2 ай бұрын

    • Same people that think 1/2 is not equal to 2/4..a reasonably good burner could cut those faster and with no marks.

      @nickv1008@nickv10082 ай бұрын

  • Можно было всего два уголка подрезать!

    @user-dn2ke2wb1x@user-dn2ke2wb1x3 ай бұрын

    • Да! И конструкция получилась бы, наверное, более прочная.

      @Sova-xu4rb@Sova-xu4rb3 ай бұрын

  • Dude is basically earning abusing the biological impulse of every tradesman (specially American ones) to tell everyone does a shit job except them.

    @videocommenter235@videocommenter2352 ай бұрын

  • Had a boss tell me to keep my nose to the grindstone, to this day I can't smell anything.

    @user-cm9wm7tg2p@user-cm9wm7tg2p2 ай бұрын

  • Вау!!! Вот э трик... Айм писсинг май пэнтс оф!!! Чё там по жёсткости данного соединения и где его применить.

    @m4pw@m4pw3 ай бұрын

    • Decorative metalwork, not structural.

      @djpaulk@djpaulk2 ай бұрын

  • А почему нельзя взять один целый уголок или хотя бы его сварить и остальные два по ьокам просто подогнать и приварить?. Чем все к подгонять. И я уверен что жто не так идеально булет слелать как на видео.

    @user-bj6nu1he4r@user-bj6nu1he4r2 ай бұрын

  • This is no welder, this is a metal smith

    @MrMaucool1@MrMaucool1Ай бұрын

  • At <a href="#" class="seekto" data-time="772">12:52</a>am, I am watching this

    @InfoPanel7902@InfoPanel7902Ай бұрын

  • Once again, a weld you will never run into

    @acman0926@acman09263 ай бұрын

    • You probably are not the creative type are you.

      @Tom-og7fi@Tom-og7fi3 ай бұрын

    • @@Tom-og7fi no, we just dont do things in the hardest possible way even when we are just tinkerng

      @jackradzelovage6961@jackradzelovage6961Ай бұрын

    • @jackradzelovage6961 what is your hurry.

      @Tom-og7fi@Tom-og7fiАй бұрын

  • А нельзя было одну перекладину зделать сплошную, А два кусочка уже к сплошной подогнать.

    @dendel23@dendel233 ай бұрын

    • Exactly.....

      @eckyx9019@eckyx90192 ай бұрын

    • То не интересно...коментов бы небыло ..

      @Mercedes_w211_@Mercedes_w211_2 ай бұрын

  • Never would I thought of this. What a genius

    @curtcoulson1010@curtcoulson1010Ай бұрын

  • I never knew that i'm 67 old men can always learn things , thank you sir

    @barrysavage-ek4bs@barrysavage-ek4bs2 ай бұрын

  • Mis Respectos al señor muy habilidoso eso ni quien se lo quite felizidades

    @gaudenciosolano3839@gaudenciosolano38393 ай бұрын

    • 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

      @SupriYanto-tp1hg@SupriYanto-tp1hg3 ай бұрын

  • Wow nice work brother.,👌

    @kurinjikurinji6745@kurinjikurinji67453 ай бұрын

  • Es hätte gereicht zwei im winkel zu schneiden

    @cakinuri9824@cakinuri98243 ай бұрын

    • Wäre so auch stabiler. Auch die 2te Markierung ist nicht nötig

      @thorstenback5623@thorstenback56233 ай бұрын

    • ​@@thorstenback5623 It would have been much much stronger if he had started with just 3 pieces of metal. One really long piece plus 2 shorter pieces.

      @trendinvestor2893@trendinvestor28933 ай бұрын

    • Estoy de acuerdo.....

      @manuelalbertoponce7888@manuelalbertoponce78883 ай бұрын

  • Pulls out sharpie 52seconds later after showing us every possible combo he could

    @kaledore1@kaledore12 ай бұрын

  • Еще более надежно будет если 2 рейки скрепить не отпиливая, а только 2 отпилить

    @lekalo74@lekalo74Ай бұрын

  • Вот уж действительно. Блин, Архимед!!! Зачем просто, когда можно сложно. Как говорили раньше: в гамаке и стоя ...

    @user-vs2ck3eb2j@user-vs2ck3eb2j3 ай бұрын

    • 😅

      @user-lh1gs4fe2z@user-lh1gs4fe2z2 ай бұрын

  • Would’ve never thought to put them together and weld it. Wow, thanks! 🙏

    @davmbol@davmbol3 ай бұрын

  • Wow he used an angle grinder to grind out some angles. Such a life hack.

    @HKBronc@HKBronc2 ай бұрын

  • And still forgot to make a 45° angle on the edges to allow the weld to go all the way through 🙏🏼

    @donb2527@donb2527Ай бұрын

  • If a welder refuses to explain this trick, go learn from a real welder 😂

    @jgilbert392@jgilbert392Ай бұрын

  • Thats the metal version of basic wood jointery. A welder doesnt tell you, because a wood worker will.

    @Draconamous@Draconamous2 ай бұрын

  • I’m a welder and this man needs to take geometry class again

    @user-ku9js3ck2q@user-ku9js3ck2q10 күн бұрын

  • There definitely another way to do that unless your working with angle iron that's to short.

    @jakea511@jakea5112 ай бұрын

  • You only needed to cut 2 of those 4. Weld the first 2 together. Then cut the others and weld them on top. Save you some time

    @Ghostdragon529@Ghostdragon5292 ай бұрын

  • Simples e prático. Muito bom.

    @sebastiaomartins9452@sebastiaomartins9452Ай бұрын

  • That’s not a trick… that’s common sense and knowledge

    @bloody1416@bloody1416Ай бұрын

  • Я уверен, что все сварщики, которые прошли курс обучения, а не купили диплом, знают и про это трюк, и про все остальные "удивительные" фокусы.

    @user-sc2kn4kk7p@user-sc2kn4kk7pАй бұрын

  • -How many welders do you need to do a job? -27 ; one to do the job and 26 to argue 67 different ways to do the same job xd

    @JesusCruz-ot4hq@JesusCruz-ot4hq2 ай бұрын

  • As a professional welder for 25000 years I can assure this is a top tier secret...

    @weslyjohn@weslyjohn2 ай бұрын

  • Smart minds always have the ability of solving problems👍

    @ronjey2544@ronjey25442 ай бұрын

  • The measuring wasn't necessary. Put a Tri-Square on there and draw the 45 degree angle from the end. It's wrought iron, you can probably just eyeball it.

    @x-man5056@x-man5056Ай бұрын

    • But it's not a 45°, nor is it wrought iron.

      @philthycox2515@philthycox2515Ай бұрын

    • @@philthycox2515You are right, it's not a 45, but you can still just draw the correct angle from the point, you don't have to measure all that. If he is making more than one, he could make a shop aid template. My bad though, it is Mild Steel.

      @x-man5056@x-man5056Ай бұрын

  • Cameramen last me गुस्सा ho gaya kiya???😂😂😂

    @dingfaal5129@dingfaal51292 ай бұрын

  • Now, for my next trick, i will weld on this unprepped surface!

    @SharpMagnets@SharpMagnets2 ай бұрын

  • سبحان الله وبحمده، عدد خلقه ورضا نفسه وزنة عرشه ومداد كلماته ". (إِنَّ اللَّهَ وَمَلائِكَتَهُ يُصَلُّونَ عَلَى النَّبِيِّ يَا أَيُّهَا الَّذِينَ آمَنُوا صَلُّوا عَلَيْهِ وَسَلِّمُوا تَسْلِيمًا)،[١] كثرةُ الصَّلاةِ على النَّبيِّ مُحمد ﷺ تفتَحُ أبوَابَ الخيرَات 🤍 ( فَقُلْتُ اسْتَغْفِرُوا رَبَّكُمْ إِنَّهُ كَانَ غَفَّارًا )

    @hussen6484@hussen64842 ай бұрын

  • "not all welders are willing to tell you this trick" ah, yes the mysterious trick known as *M E A S U R I N G*

    @loveheartBOMB@loveheartBOMB2 ай бұрын

  • Welcome to high school geometry. Now, take out your pencil.

    @Nic7320@Nic73202 ай бұрын

  • Most people do not really know what welders do. Small things like this is just done by someone with a welding machine at their house or workshop.

    @piet8803@piet8803Ай бұрын

  • “Not all welders are willing to tell you this trick” because it’s useless lol bro. No one needs it.

    @BlueTurtleClips@BlueTurtleClips2 ай бұрын

  • Caption should read: If you don't have the common sense to figure this out, you shouldn't be welding in this first place. -telepone, tele friend, tell a Fitter.

    @DanielHernandez-ox2ri@DanielHernandez-ox2ri2 ай бұрын

  • Woooaaahh.. He... He measured something.. and.. and he even marked it too.. I havr never seen a welder do this before, just incredible.

    @Immortal_Mentor@Immortal_Mentor2 ай бұрын

  • Oh cool I always wanted to learn how to do that. Thank you for teaching me. 😊 ❤❤❤

    @DanielSHIRO@DanielSHIRO2 ай бұрын

  • Im drooling over this bro i need to try and weld it

    @woody955@woody9552 ай бұрын

  • Better yet, join just two opposite sides to a non-cut continuous angle.

    @shoshinsamurai7901@shoshinsamurai79012 ай бұрын

  • These comments prove that welders are some of the most insulting people ever. Even if you do the perfect weld, they’d still say “meh, I could do better” with no constructive criticism.

    @guts60@guts602 ай бұрын

    • Maybe because the way he did it is fundamentally dumb if you know anything about anything.

      @kingtiger3390@kingtiger3390Ай бұрын

    • @@kingtiger3390 If you know anything about anything, you’d know that I am joking about the stereotype of “welders always insulting others’ welds”. I wasn’t even talking about this short anymore, I was just making a general joke. You took this way too personally and it’s telling of your chronic internet addiction

      @guts60@guts60Ай бұрын

  • Круто. Теперь надо придумать как это всё сварить, чтобы в итоге получилось ровно.

    @tarok.shaman@tarok.shaman2 ай бұрын

  • Who else waiting for part 2, with explanations of making marks on ruler?

    @sergeykholin6285@sergeykholin62852 ай бұрын

  • How about just cutting the edges to the angle of the piece divided by 2? This is a 90 degree angle piece, cut the edges at 45 degrees and be done! The trick is discovering something called GEOMETRY!

    @duelsonsantos2380@duelsonsantos2380Ай бұрын

  • Just put 2 on the side of a solid one for a stronger weld.

    @Manuel_Z_Kayaks@Manuel_Z_Kayaks2 ай бұрын

  • 👍👍👍 experience and practice makes you successful.😊

    @ramacharyagupta5017@ramacharyagupta5017Ай бұрын

  • The first thing you do is get one continuous piece, then weld the other 2 perpendicular ones to it.

    @oggyoggy1299@oggyoggy12992 ай бұрын

  • Geniuses are able to do what their teachers couldn’t teach during lessons 😊🤜🏽🤛🏽

    @AlTawfeek@AlTawfeek2 ай бұрын
KZhead