Want to win my brand new Suzuki GSX-8R? Head over to yammienoob.co to check out our awesome new merch and become a member!
Whether you take your motorcycle into the shop or DIY at home, this video will tell you all you need to know about new tires for your bike!
Start saving on your insurance! Go to www.voominsurance.com/yammienoob and get a free pay-per-mile quote using my link!
Grab a Cardo Communicator here: cardosystems.rfrl.co/3g1p7 - code "YNCardo" saves you 10%!
Rent a ride on Twisted Road! twistedroad.com/ref/yammie - Get a free day or 20% off!
Recommended Beginner Motorcycle Gear:
Helmet: bit.ly/Scorpion-EXO-R320
Jacket: bit.ly/REVIT-Eclipse-Jacket
Gloves: bit.ly/EVS-Assen-Street-Glove
Boots: bit.ly/Alpinestars-Sektor-Shoes
Jeans: bit.ly/Revit-Carlin-Jeans
The Gear I Personally Wear and Trust
Street Helmet: bit.ly/YN-Street-Helmet-Arai-XD4
Track Helmet: bit.ly/YN-Track-Helmet-Arai-C...
Sport Jacket: bit.ly/YN-Sport-Jacket-REVIT-...
Touring Jacket: bit.ly/YN-Touring-Jacket-REVI...
Sport Gloves: bit.ly/YN-Street-Gloves-REVIT...
Touring Gloves: bit.ly/YN-Touring-Gloves-REVI...
Pants: bit.ly/YN-Motorcycle-Pants-RE...
Boots: bit.ly/YN-Motorcycle-Boot-Alp...
FAQ:
What should my first bike be? A Turbo Hayabusa.
Very funny, no seriously. What should I get? A TURBO BUSA.
What is this channel? The premiere source of motorcycle edutainment (educational + entertainment) on KZhead. We take on everything from the best bikes you should buy all the way to praying to our lord and savior Rossi.
Why should I subscribe? Because you want the highest quality motorcycling videos on KZhead delivered to your feed every single day (seriously, we do daily uploads)
Why do you guys make these list videos? Like any good capitalist, we supply the demand the market has.
Music: amplelife.bandcamp.com
NOTICE: Elements utilized from other videos are fair use and fall under U.S. copyright law because it is transformative in nature, uses no more of the original than necessary and has no negative effect on the market for the original work. It is against the law to fraudulently claim a copyright on a video you do not own under the DMCA or to abuse KZhead’s copyright claim tool.
CHAPTERS
0:00 Intro
1:45 Why Swap Tires?
3:59 Front & Rear Stands
5:24 The Tools You'll Need
6:36 First Steps & Raising the Rear
8:32 Raising the Front
9:38 Rear Wheel Off
14:14 Front Wheel Off
18:33 Changing the Tires Yourself
20:40 Final Thoughts
In the UK we have ride in ride out no difference than getting car tyres done free fitting.
Can someone translate this to English?
@@SynicalBeats "Here in the land of fish and chips we have the opportunity to change our motorcycle tires the same way as cars usually do. You just ride in to the shop and they change the tires no extra charge" :D
Same in Australia. I always ride in get tyres with no extra cost..
@@rudijohnsen2557 ah. Thank you.
@@SynicalBeatsI think you mean “American.”
Also it's a great idea to keep some zip ties of varying size and strength around. You can zip tie small groups of parts together to keep them in order. Also works great for holding big stuff you don't want to fully remove, like zip tying the rear caliper to the swing arm
The screw holding the rear brake reservoir vibrated itself loose while riding. The thing could get jammed between tire and fender, rip off and spill slippery brake fluid over the rear tire and stopping the rewr brake from working Luckily i had a random zip-tie in my jacket from last night's wrenching and we could continue the ride
So you also watched Bearded Mechanic's video.
I took your advise about the sport touring tire and i absolutely love it! I got the road 6 on the rear as i had to replace due to a flat. 2k miles in about a month and the road 6 is wonderful!
Thanks for the information hope to see more maintenance videos in the future.🙌🏽
It always feels way better when you get a new front. Even when they "still have tread" the pointed worn shape really does make them fall in quick but unstable feeling.
I buy my own tire and then take my bike to SoCal Superbikes. In and out in less than an hour for $68.
Nice!!! Great price.
What a pain. And all the extra tools you need.
Yup; if they don't make you pay through the nose in your local shop - take it there. I definitely will next time.
My thoughts exactly! 😂
I paid less for all the tools to do it than my local shop wanted to do it once, and now I have the tools. It does take a few hours but I like working on stuff.
I have a VFR800 with a centre stand. Taking wheels off is very easy then the tyre shop does the rest.
Don’t forget to scrub in your tyres before you start pushing them. They will be very slippery due to the release compound they have on them from manufacture. Go easy for a while 😎
I always changed my own tires. I didn't have a stand, so I would tie the front end up to my dad's garage rafter(my garage lid has drywall). Then, I'd tie off the backend once the front was done. The back was more difficult, but did it myself.
Not the worst idea at all. I almost like this option better lol
Also a good time to install those angled valve stems that are pretty cheap and handy.
I pulled my tires off afternoon picking it up with an engine hoist. Used 2 jack stands and a 2x4 on the front to keep it upright while I lifted the rear lol
Not gonna do it myself because I don't have space for it, but this is the kind of info I would want to get for when I do have space for my own maintenance. Very informative.
Best channel for learners, no competition
He's pretty good. And funny too
not even close
Hey Yammie Noob , Here in Nova Scotia you have to watch out for (Road Snakes) pavement that's cracked filled syn-plastic, tires a little worn will slide!! (Worse in colder temps) Great Video!!😀👍👌✌
You're talking about that rubbery shit they fill cracks all over with, even new good tires will slip on that shit.
Great video, it's great someone finally does the whole replacement actually step by step with clear instructions. I did change my tires on Africa Twin last month for the first time and I have one question no-one in these videos addresses: when you put all this stuff together again - how much is it acceptable for the brake pads to rub on the rotors? They're REALLY close together and after few days of riding I noticed after lifting the back wheel that it still does stop a bit too fast and the rotor is a bit warm. Any advice will be greatly appreciated, love the channel. PS. For anyone who will be doing it on their own: don't forget to put some grease on the wheel bearings and both axles.
A little close is no problem. I usually pry them slightly open (gently) with a flat head to give me some room. Make sure to pump the brakes a bunch before going out to ride too.
Quick thing that works cheaply for axle nut is find or buy a bolt that the head fits into the female head of the axle. Then double nut the threaded side and with a wrench that fits break her loose. Remember front can sometimes be reverse thread
So crazy, i literally needed to have my front tire replaced today
Gotta do a video like this on your Dessert Sled for us single sided swing arm peeps
2 CT , is my favorite street tire. 👍
After looking at some track side stands and seeing AWFUL welds it was easy to justify the cost of the Pit Bull stands. I bought my PB rear stand about a month ago and it's impressive! Excellent build quality and definitely worth the money!
lol my bike is in hovercraft mode in the garage right now -- wheels are at Cycle Gear getting new rubber
Thanks Nammie Roob!
Bro i thought u where gonna put the gsx8r onto a snow mobile kinda setup and use it in snow 😂
For my bike the service manual recommends replacing the caliper bolts. Some bolts are tty, so I would recommend that everyone check a service manual for your bike.
You forgot at the end to give those new tires the Wet Look with some Armorall 😁🤣
I love my Pit Bull stand, and they are made right here in Huntsville, Alabama
I like to put all the washers and spacers back on the axle with nut to keep it all together in the way I removed them
What to do when you need new tires? Step 1: Get new tires
Fo sho
Get the money for the tyres
@@hardladislas828 Work to get the money age until you can work be born
@@yammienoob Be an idea in a couple's head Which turns out good or bad Bars xD
I dont have stands...but i do have ratchet straps....i hung a few if my motorcycles from the rafters for some work
Nammie Yoob with a perfect tutorial - grazi
I literally just got new tires and am looking at this to put it on 😅
Isn't it time to check out something like the ABBA stand. So much better especially for a little heavier bike. Also with one stand you can put the entire bike into the air. Really so much better than those darn separate stands.
it also costs 4x as much.
Wow, removing them is easier than I thought. Gonna remove them myself on my next tire change but I'll gladly pay my Duc shop to change the rubber.
Yam yam swap the photos under the testimonials yzf-R3duke 390. Heads up. Cheers mate!🤙🏻
Wow, what a coincidence, this came just at the ryt time. I'm gonna change my front wheel of Svartpilen to Pirelli rally scorpion and needed some advice. Thanks a ton @yammienoob
Awsome video! Gr8 info! Just 1 question, dont you need to grease the axel when putting them back inside the rims? as you asemble the thing? Or is that not a thing?
Hey Yammie, Just curious did you did you bounce the front suspension to center the front axle, and did you spin the front wheel then apply break to seat break calipers before tightening them. Would you recommend thread glue on the break caliper bolts, and finally don't forget to pump the breaks front and rear as pads will have pushed back. Keep Watching Yammie Noob love those clips 😅
Excellent video. I am very careful to take the bolts and washers and any axle spacers off and place them in order in the way they came off. As in , I do not turn them around by accident. i keep them in order by side as well. you really cannot be careful enough. This is no time for a beer or a nosy friend running his mouth in your ear. This is your safety. Also, yes, clean your tires but do not pressure wash them with the bearings exposed like this. Shop rags and some spray and keep that spray from running inside the bearing housings. Also, if you have a bike shop change the tires, check the inside of the axle tunnel for grit. if it's there, carefully wipe it out. if it's really bad, you might have to do some bearing work. You just have to be really careful. And yes, using a quality torque wrench is necessary. Do it right. Great video.
Dunno why I’m watching this bc I’m the segment one, happy to get the dealership to do everything. I wouldn’t even do if I knew how to 😂
Lol .. typical craftsman box, the lid is held open with a mallet.... Top left corner of the screen when yammie stands in front.. Ive worked in and out of shops for 30+ years and you can always count on a craftsman lid to never support itself as long as the competition. 😂
I tried to put my old Triumph up on a rear stand years ago... thankfully, the side of my car saved any serious damage to the bike when it fell over 🤦♂️
This was two weeks too late for me! I struggled with a cheapo front stand that was actually bending under the weight of my very light bike and pulling the forks outward slightly which pinched the axle and made it really hard to remove. Once I figured it out, I took some of the weight off the stand with a heavy duty ratchet strap I had connected from the triple clamp to an overhead beam in the garage. I was using the strap because I already didn't trust the front stand to begin with, but I also wanted to secure the bike from tipping accidentally. Anyway, then the axle came out easily. First lesson: don't buy a cheapo stand! When I got to the tire store, an observant and helpful customer (also a rider) pointed out that I forgot to remove the spacer which I grabbed before they took my wheel into the shop. Second lesson: don't forget about the spacer! I didn't feel comfortable letting the calipers hang like yam did, but it's really easy to thread a light weight tie down strap through the bolt holes and pass the strap up to the handle bar through the fairing to support the caliper. Another suggestion would be to read up on how to use a torque wrench if it's your first time. Got it done though and made it to my first track day with new rubber. :)
Lol I ratchet strapped my front end to a tree branch to.change mine
Neat toys Yammie!!!
I tried to spoon on race tires myself one time with only hand levers. DO NOT ATTEMPT! 🤪
Yammie does matience videos now, hell yah
I ride a harley too and your shirt doesn't offend me lol.
6:18 me watching the video with my single sided swingarm ducati 👁👄👁
What are your thoughts on switching to a wider rear tire?
If you don’t have these tools, it’s much cheaper to pay someone to change your tires
I could be wrong but it looks like the tread on the front tire is the wrong way around, it will funnel water toward the center of the tire that way. The rear tire looks correct
I also have a question I looked at the Michelin Road six tires my bike uses a 200 in the rear they only go to 190 is that a problem
Me with a single sidded swing arm bike watching this video haha
You don't remove your rear wheel sprocket before balancing?
I just take mine to the dealership
id love to do it myself but all that equipment to replace the tire looks crazy expensive
I darkside my V Strom 1000. Gotta do that yourself, just not very often I get 25k on a rear and I ride HARD.
first, get a set of R11, power cup 2 or supercorsa
For the labor its far easier to just pay them to do it. By the time im done removing the wheel, leaving the bike on the stands and drive it down to the shop, where im likely buying the tires anyways, it just doesnt make sense to do this. Especially when they usually give me a pretty good deal on buying tires and installing them with the shop. Now, if i were installing and balancing myself, then yes. Otherwise its not worth saving $50 doing all this. But different strokes for different folks.
You save more than 50 dollars doing this. And it’s every time you do it. You’re just lazy. The stands cost less than 100 dollars and you can use them forever. If you have more money than you have sense then go ahead and pay someone to take them off for you. You could also mount them yourself with another cheap tool and pay someone like 20 dollars to balance them.
Maybe clean the wheels before taking the old tires off/before putting the new tires on?
A genuinely helpful vid & each to their own but personally there's no way I'm spending my time doing this when I can just take it to the dealer. It's really not that much extra to have them fitted, if anything at all, after you've already bought the tyres. The cost of getting all the tools to do it right is probably the same cost as about 5 sets of tyres anyway.
I just just tell Aloysius my garage butler to square that away for me. I am usually more than pleased with his results
Hey I tried to get on your website to buy some Mx boots and I saw you got rid of all of that stuff what happened?
Youda freaked you saw my tire change. Log Front wheel suspended for a week.
Gonna buy oem (I had 10k km on them and were just right for the bike) and have it fitted by the shop. I’m just not an handy mechanic. I was asked 350€ for two Metzeler touran fitted and I hope I’m not being screwed.
I know this might be outside the subject of this vid but you didn't talk about choosing the right tire for your bike. I tend to ride classic (old bikes) and choosing the right tire for an older bike is a subject i don't see people talking about. My question includes things like radial or bias ply and choosing the right tire for the for the shape of the rim etc. thanks for your consideration.
Ya I’ve noticed predominantly all these channels talk about only newer sized tires and styles. I bet we are alright with what ever stock size we end up using. My wheels are 16 inch and I’ve heard that’s troublesome for buying different styled tires. Idk man
@@rustypotatos yah it's my understanding older bikes (classics) should use bias-ply not radial tires because the frames in older bikes aren't designed for the same stresses (i.e. less stiff frames) and you should also match the rim shape to the way the tire grips the rim.
12:26 - Those aren’t “Washers”, (ya noob). Those are “Bushings” !
"How to change your own tires" - Purchase new expensive tools dedicated to the art of changing a tire.
Maybe two of these tools are specific to wheels. All the other tools are universally needed
I once got a puncture on my Aprilia rs 125 back in 1997. I asked the local garage where I should take it. They said they always used a mobile guy and he was gonna be coming later in the day. I got the number of the company, went home, removed my rear wheel, and rang the number I’d been given. I explained I had a puncture, and had been given the number by a local garage that said they were going to be in the area, the lady said to hold. When she came back she asked me to describe again exactly where I live. When I told her she said “well this is your lucky day” she had just radiod the driver, and he was literally approaching my house to drive past to the garage when she contacted him. She said to me. “If you hang up your phone and walk outside your house the driver is parked outside your house and ready to go”. Sure enough I walk outside my house and there’s a mobile tyre van sat there ready and waiting. Think he only charged me about £3 aswell…..such a strange coincidence I’ll never forget it.
The difference in labor has to pay for buying the tools before you save money.
Oh oh oh Shadetree did this so im gonna do it too.
To add. DO NOT TOUCH THE BRAKE LEVERS
Nice t…. Where can I get one??
#4 Uhhh what about supporting ur local shop, and having them change it instead of the dealer
Not too many local shops that do bikes. In fact, the local shops most likely is a dealership.
How do you balance them at home?
Buy a static balancer stand and wheel weights. Very simple to do.
@@broc2727 but is it cost effective?
any one use RIDE ON tire sealant to balance your tires?
Papa yam knows his shite
How do you balance your tires yourself
Getting them balanced is cheap af
Just to note something for those who don't have any of these tools or equipment on hand: If you need to buy fork stands/torque wrench/basically anything that's going to be more expensive than $100, your local bike dealer is going to be comparable in price if not outright less expensive depending on the tires you want. These tools will not pay for themselves until your 2nd or 3rd tire change. Source: I know from experience. Spent the same amount of money on buying everything to do it myself as it would have cost for my shop to do it.
Dangling front calipers, a no-no rule that nobody seems to actually care about.
Free fitting from my Yamaha dealer so....
Would you consider filming in 4K?
Can you enter the giveaway if you live in a different country. As a international supporter of the chanel I would love to enter the givaway.
Love from japan Pakistani
I wish I could get 3k miles minimum out of my tires
reminder: new tires are slippery!
Yeah, I'd rather just pay someone because f that.
You dismembered my bike without telling me!
What to do?. You get a new tire. Duh...
You should definitely not put the sharp end of a flathead on the threaded end of a front axle, and hit it with a hammer. That’s a great way to destroy the threads. You should also spin the front wheel with the caliper bolts hand tight, and grab and hold the front brake, while you tighten the caliper bolts, so you know they’re aligned with the rotors. Also, after the axle is tight, before you tighten the pinch bolts, you should drop it off the stand, and work the forks a few times, to make sure the noncaptive leg of the forks is aligned. If you don’t do those things, you can get pulsing in the front brakes and a wobble at the front wheel.
second :(
You are taking off way to much stuff it’s not necessary
only those who have a passion for bike can like this comment
🇬🇾🇬🇾🇬🇾🔥🔥🔥🔥🔥
When I drop my wheels off to my local car tire shop to get the tires changed he charges me 50pesos per wheel or just about a dollar 🫶🏼😂
Charged me 100 to put air on mine 💀