KZhead
Ғылым және технология

Tig Welding Technique For Root Pass!

X3M TIG
2024 ж. 27 Сәу.
18 827 Рет қаралды
Жүктеу

TIG welding technique for root pass.
In this video, I will guide you through the intricate process of Tig welding the root pass on carbon steel pipe. The root pass is a critical stage in welding, and mastering this technique is essential for ensuring a strong and durable weld. I will explore the specific steps and considerations involved in Tig welding the root pass on a horizontal carbon pipe, providing valuable insights and tips for achieving a flawless weld.
This video is designed to equip you with the knowledge and techniques needed to excel in Tig welding the root pass on a horizontal carbon pipe. Whether you are a beginner or an experienced welder, follow along as I explain the process and share valuable tips to enhance your Tig welding skills.
None of these videos are recorded in a fancy shop surrounded by sponsorship banners!
My videos are recorded at working sites in various locations and welding positions.
90% of my welding projects in videos are x-rayed, and if you like to see hands-on projects, welcome!
If you liked this video please give it a thumbs up, share it, subscribe, and click the bell.
It doesn’t cost you anything but massively helps my KZhead channel. Thank you.
Support this channel with 🔔 Subscribe and 👍 Like!
🌐 Stay Connected & Learn More:
📧 Email: info@x3mtig.com
🌍 Website: x3mtig.com/
📘 Facebook: / x3mtig
📸 Instagram: / x3mtig
☕️ Buy me a coffee rb.gy/34q2c

Пікірлер

  • always amazes me how consistent the roots are

    @frostonpc972@frostonpc97217 күн бұрын

    • once you have a decent sized puddle moving it's fairly forgiving

      @Jon-jk8vd@Jon-jk8vd17 күн бұрын

  • This is art

    @plustreasure5223@plustreasure522317 күн бұрын

  • The inside of your carbon roots are so good. I've been welding schedule 10 316 stainless lately so it's been a while since I've done one roots. I want to try it again when I watch your videos.

    @nolanfrank582@nolanfrank58217 күн бұрын

  • Thanks again!

    @Shadoudorimu@Shadoudorimu17 күн бұрын

  • Сварочный аппарат Миллер это мощь и надёжность 💪🏼.

    @Grrhc5t@Grrhc5t17 күн бұрын

  • Odlican video! Hvala lipa!!

    @stipe573@stipe57317 күн бұрын

  • Great vid

    @nathanielclause2588@nathanielclause258817 күн бұрын

  • Very nice work.

    @taumbannon5289@taumbannon528916 күн бұрын

  • Brazil say thanks for sharing this video.

    @cidicley3162@cidicley316215 күн бұрын

  • 🙌🏽 Thank you brother!

    @mohammadabuhamed3513@mohammadabuhamed351317 күн бұрын

    • You bet!👍

      @X3MTIG@X3MTIG17 күн бұрын

  • Great work 🔥

    @kevvog7017@kevvog701716 күн бұрын

  • Pozdrav zemljace svaka cast za svaki tvoj video.Dosta toga moze da se nauci iz njih.Kako je u vezi posla i zarade za tig zavarivaca u Kanadi.Pozdrav i sve najbolje

    @IgorDjordjevic-uq9xk@IgorDjordjevic-uq9xk17 күн бұрын

    • Hvala ti na komentaru… ima dosta posla za zavarivace, posebno za tig varioce. Kvaliteta zivota je iznimno losa, osim ako ti nesmeta-30 do -40 temperature zimi i da ti obitelj nemoze izaci iz kuce po 5-6 mjeseci zbog hladnoca… meni osobno smeta pretjerana liberna politika ovdje, sto se kosi s mojom percepcijom kvalitete drustva u kojoj bi zelio da mi djeca odrastaju… osobno gledam da se vratim u Europu ili ako bude prilika za Ameriku! Sto juznije i sto konzervativnije! 😉

      @X3MTIG@X3MTIG17 күн бұрын

    • Ako planiras Evropu samo Sfajcerska ili Austrija direktno sve ostalo je slabi sto se tice zarade i sto se tice zivota.Pare su na Bliskom istoku i Emiratima.Moja preporuka Amarco naftna kompanija ili Francuski Total sto se tice zarade.

      @IgorDjordjevic-uq9xk@IgorDjordjevic-uq9xk17 күн бұрын

  • Fantastic videos and great work!

    @jiminotjonny@jiminotjonny3 күн бұрын

  • great vid always quality welds!

    @yewcutter5385@yewcutter538511 күн бұрын

  • Красавчик!

    @user-oy7pq6wy1q@user-oy7pq6wy1q2 күн бұрын

  • When you say 100% Xray does that mean it must pass the highest grade or that they Xray the whole and all the welds you did?

    @KrogunDK@KrogunDK17 күн бұрын

    • In this case 100% X-ray both joints I did!

      @X3MTIG@X3MTIG17 күн бұрын

  • Can you do a video showing the fill and cap as well?

    @domvsthawrld416@domvsthawrld41616 күн бұрын

  • Good work

    @mdjamantalukdar7774@mdjamantalukdar777415 күн бұрын

    • Thanks

      @X3MTIG@X3MTIG14 күн бұрын

  • How did you get into this type of work?

    @carterd7720@carterd772016 күн бұрын

  • Where in Canada are you working? I recognize your coveralls

    @calebshauer2348@calebshauer23484 күн бұрын

  • Hi X3M is it essential to pre-heat for tacks? thanks

    @Jack-tp5ji@Jack-tp5ji16 күн бұрын

    • If procedure calls for preheat than yes, you should!

      @X3MTIG@X3MTIG16 күн бұрын

  • Awesome sir if you dont mind me asking about how long have you been welding? Thanks for posting.

    @michaelwillis6520@michaelwillis652016 күн бұрын

    • 23 years in July!

      @X3MTIG@X3MTIG16 күн бұрын

  • 👏🏻

    @commietube4273@commietube427316 күн бұрын

  • Alstom boiler?

    @thefrenchcanadian799@thefrenchcanadian79916 күн бұрын

  • Nice video. Can your share alloy material your welding

    @RezaHermansah@RezaHermansah16 күн бұрын

    • Carbon steel

      @Jon-jk8vd@Jon-jk8vd11 күн бұрын

  • Hey man i have a serious question. I am a young welder but i am already experiencing some pain in my wrists from wiggling and walking the cup. How do you prevent these injuries? I hope you can give me some advice so i can keep doing what i like

    @real_stickyy2062@real_stickyy206217 күн бұрын

    • Ur holding the Tig rig to tight loosen up ur hand that you hold the Tig torch in. Old head once told me he should be able to come up behind me while I'm welding and snatch the Tig torch outta my hand with no problem

      @jeffereyevert9393@jeffereyevert939317 күн бұрын

    • @real_stickyy2062

      @jeffereyevert9393@jeffereyevert939317 күн бұрын

    • Don't squeeze the torch too tight, especially when walking the cup, if you're a beginner it's normal

      @wFreNiX@wFreNiX17 күн бұрын

    • Do it freehand.

      @dexa616@dexa61617 күн бұрын

    • be a man

      @Jon-jk8vd@Jon-jk8vd17 күн бұрын

  • Yo, X3M, whats the average $/h in your experience for welders with few years of experience with welding pipe?

    @funkotic@funkotic17 күн бұрын

    • It all depends on your welding tickets, and if you are working on union or nonunion projects…. average here in Alberta is $40/hr - $52/hr CAD

      @X3MTIG@X3MTIG17 күн бұрын

  • Hello

    @azhargill33@azhargill3317 күн бұрын

  • what size cup are you running?

    @jacobperez7246@jacobperez724616 күн бұрын

    • Guessing a 7

      @Jon-jk8vd@Jon-jk8vd11 күн бұрын

  • Guys I got a question, 7016 rod root pass uses dcep or dcen ?

    @STRM-uy8sc@STRM-uy8sc13 күн бұрын

    • 7018? Reverse polarity DCEN

      @Jon-jk8vd@Jon-jk8vd11 күн бұрын

  • 😮😮😮

    @azamatjon4150@azamatjon415016 күн бұрын

  • Good jop

    @elyorrahmatov7248@elyorrahmatov724816 күн бұрын
KZhead