Why does this Free Energy Generator not work?
The idea of free energy is an attractive one.
Renewable energy is the future and it's time we stop relying on dirty sources.
What if we could generate clean, free power or at least cheap sustainable electricity?
The laws of thermodynamics are often cited as the reason we can't have sustainable energy.
But is that really true?
Watch this video and see if you agree.
Also in this video a better way to protect intellectual property.
Intellectual property can be protected in different ways. One way is by implementing an NFT (non-fungible token) which grants the right to its holder.
This video demonstrates how you might go about protecting your intellectual properties through various technologies like smart contracts.
www.buymeacoffee.com/MarkusNe...
Aluminum Profile: amzn.to/3J7ibyD
Keyless Bushing: amzn.to/3EgFgLp
Pulley: amzn.to/3yWSaNS
Shaft: amzn.to/3phWfsz
I just commented on your first video..... I beleive that your ideas of a sustainable mechanical energy system align very closely with mine. The fact that you mentioned freq drive control is blowing my mind right now. I too believe this can be achieved through such a system.
Its not him idea.
Your videos are so great! You're thorough and entertaining! Keep it up man!!!
Thank you very much Pablo I appreciate that positive feedback!
I really enjoyed this attempt you’ve made and still willing to keep looking into it. Please don’t give up friend, I’m sure there are lots of us hoping for success on this one day. I am a subscriber now👍
Thanks very much!
Subbed due to your outstanding effort and honesty,Thankyou.
Thank you very much Bob cat!
The detail you go into for these videos is awesome. It makes it easy for anyone who wants to try and repeat this experiment to be able to give it a shot.
Thank you Joshua I am trying It helps that I enjoy making this videos:)
I came to realize that inventing something takes time, money, and energy (lots of brain power). Glad to hear it back so soon from you.
I know right it’s very time consuming. And yes unfortunately all the components are pretty pricey. Happy Thanksgiving!
The inventions and inventors already exist. It's about resources, funding and censorship (or lack of it).
Have you try a small motor with higher rpm to make the generator going a bit higher in rpm.......impulses from kinetic energy are very frustrating thing
Your spot on with your comments about the patent office and oil money. Heres a hint at making your machine work. Incorporate energy that is already free into your machine or your machine into it.
Thank you Speed smash!
I like how you approached the idea and how you gave it an honest run
Thank you John!
This is easy to do. All you need are frictionless bearings, 100+% efficient motor and generator, a perfect vacuum, 100% efficient belt/pulleys, room temperature superconductive electrical components, and perfect dynamic balance. Easy!
And even then there would be only enough power to keep the thing turning. Any attempt to get power out of it would stop it. All these things are dreams.
@@andyhowlett2231 right!
Lol. This video us so full of 💩 i can smell it through the phone. No i dont have any on my hand 😏
And a djinn to flip the switch
Sounds easy enough Brad :)
Love everything about this. I have been trying to make a high efficiency axial flux motor. I think this could pair nicely wth your project. They could be mounted directly to the face of the flywheel. And I think that's the goal with the whole thing. Minimize losses everywhere. But it sounds like you are already thinking of that in far more detail than I would have ever thought. Love your patent idea. And the use of machine learning for this project as well as trading algorithms ( would love to see a video on that) Keep up with the great content
Thank you very much Colby very much appreciate it! I will try to keep up the content but it’s a challenge:)
Wow great video. Your production skills are amazing! You're onto a few good things there man, I like it 👌
Thank you very much Based Boy!!
Hey brotha, your content is genuine and much appreciated! Subbed!
Wow thanks very kind of you! Much appreciated!
@@MarkusNenning Absolutely, thanks brotha. Happiness and great health to you!
@@cybersamiches4028 same to you!
Amazing Analysis, Deployed Worldwide Through My Deep Learning AI Research Library…
we ,without a doubt , know there is over seeing faction that doesnt want energy giving for free. this includes fossil fuels. trillions of dollars, would be taken from these factions. not to mention the other kind of power. there has been thousands of invention deep sixed over the years. but, the most important thing , is to keep pushing these personal power alternatives . i really enjoy your site.
Thank you very much Ed!
Yup I'm sure the government already figured it out. Other governments to if electricity suddenly becomes free there will be a major problem with the economy as we no it.
@@adamreynolds1291 for sure and probably war.
@@MarkusNenning You're* all fast asleep . i can't explain without spoiling my own project potentially giving better funded men my idea before i'm finished.. 2023 ish .
Quit impressive work you have done on this project. I'm not an engineer but I have watched much of these free energy generators. What those indian guys did: 1) Used generator/alternator of some 10-12KW power produced over max 1500rpm 2) This vibration thing, I have seen it in some of them.
Thank you Ihsan!
Man! You're so awesome, you're doing so much stuff while being a parent? I really like watching your videos🤩. Hope this channel grows more soon🎊
Dear Bro. We've mentioned this before and look forward to hearing from you about this new video. "If we place the Heavy wheel between two powerful magnetic wheels and magnetic force rotates the weight wheel according to the desired cycle, then we will definitely get good results.
I am working on modifying a car alternator with permanent magnets to see if that works. I will make a video about it once finished. Thanks Muhammad
There's a video is pretty old but it is still up the Wilkinson machine there's only one video there was never a part 2 ??? And I don't think that was because it didn't work ! I say take his gravity generator and make it a closed liquid system I know the 12 volt fuel pump in my car can run a couple of hours and not run my battery dead so I don't imagine it would use a whole lot of power to pump 10 gallons of liquid back 15ft in the air to a holding tank I would say the output if it had an alternator/generator on it would run a 12 volt fuel pump and more
Thanks Mike, I do have a video on an actual gravity generator you might want to check out.
Force 1 (the motor) accelerates the wheel but load 2 (the generator + load 1) decelerates the wheel more than force 1. Very cool design however. I think it might be useful if the wheel were big enough to be a battery and the generator could pull load off of the wheel over night, and the motor could spin it with solar during the day. The generator would need some sort of on ramp to initiate startup of the load, as well as releasing the generators shaft when no load is needed (100% efficient generator would solve this but all generators are not 100% as far as ive seen), as load is initiated friction is applied to the generator’s shaft until it matches speed with the wheel, and when load is no longer needed the shaft is decoupled from the wheel. If the bearings are really good, and the weight of the wheel and the speed of it is fast, and if it is in a vacuum, you create a mechanical battery!
Thank you for the feedback and compliment on the design Ghanzo!
This is intresting but another issue that we havent really been working on is storage of power batterys only last so long and in a dire or apocalyptic scenario ways to make power will only last so long and storage of said power would be even harder
turn the shafts vertically and use magnet to keep the flywheel floating and reduce gravitational friction. Magnetic Barings help anywhere you can apply it.
Not as easy to turn vertically but yes that would be better. Thanks
great efforts. i have also watched those videos send to you by your friends and ive tried to gather what's needed, but you just put it to the test 👍 im sure one day we will find the right equation if balance or mechanical is the problem. if those guys proves it worked, then i imagine what they've been through to make it so. let's keep on trying.
Thank you Sammy! I agree this videos can not all be fake. Some invested large amounts of money on their projects and I don’t see any reason why they would claim it works when it doesn’t.
@@MarkusNenning the reason is always the same.....a fool and their money are soon parted
@@MarkusNenning views and youtube money, lol bless em.
@@MarkusNenning this video shows what you need to modify to make it work. kzhead.info/sun/g6Ztp8Oef2aemp8/bejne.html
As an Electrical Engineer teaching Physics and Energy Transfer at the University is very sad to realize that so many people still believes in "Free Energy" or "over-unit Energy" or efficiencies above 100%... Detailed formulas and measurements have worked very well to explain all the electrical phenomena, loses, efficiencies and mechanical constraints. Please don't lose more time in trying to reach the impossible.
The problem is that people dont accept or understand that you cant produce energy. Energy is not a product which can be assembled or created. Its more the potential to do something and that potential is finite as far as we know and observe.
Totally Agreed with You . I don't even need to crunch down the numbers to see all the Flaws in the system . Every time I see these systems I come to a conclusion . I really don't think that people know what EFFICIENCY means at this point . Many people lost their entire life looking for something that don't exist . All these people should Focus on making a System more efficient
@@FoxRoxification Yeah it's part of Thermodynamics Law . Funny in some crazy sense . They think these laws were made for no reason 😂😂😂😂
Did you see that when these people get to a thing they don't understand they get to those Super complicated Technical terms ? Nano scale ? Molecular ? Energy is Vibration ? WTF ? what's a motor a generator and a Flywheel has to do with Quantum mechanics ? LMAO !
Great work and amazing company. I must say that you have a sound structure and drive with Verde 350. Ps: i see that you are almost on 5k subscribers. Keep it going... Well done.
Thank you very much SneakySquid! Much appreciate that feedback!
The idea is awesome, the most poer used would be to start the machine, once in motion it coasts accelerating the generator. Run the the system on a solar power system, which the generator will surely charge and power a house with less work. I might be wrong but it is a great way to amplify what may be lost on rainy short sunshine days, in turn needing less panels to brink a 5kw system to life. Can work on a magne axle at another time when we have more time
Gear ratios should alow you to minimize power needed to start everything and maximize rpm to the generator giving you the most potential for this to work
Do you have build something like this? Can it really work? Thanks from Germany!!!
Gearing adds friction that can't be overcome
@@jonnyrox116 True but gears can add torque meaning you could in theory and more power generation units there should theoretically be a point were generation overcomes loss from friction and condutive loss the whole idea due to the laws of physics is a pipe dream but so was all great inventions to date
Very True JonnyRox!
Wann darf den die Menschheit darüber erfahren!
Hello my name is José Manuel, I am from Spain and I really like your videos, I am interested in making one, could you please tell me where to buy the axle, the weights, pulleys and the attachment of the weights and pulleys to the axle, thank you and a gretting.
Thank you very much Jose! I will add some links in the description in the next couple days hopefully that will help you find the parts. I know it can be very time consuming otherwise. It should be easier in Spain since you have only the metric system and not a mix of both:)
Hola yo también soy de España llevo muchos meses siguiendo este tipo de inventos, aportando ideas y también he intentado hacer algo, es difícil pero creo que se puede conseguir ahí buenos prototipos, pero hay que confiar en los imanes permanentes
Really love what you are doing! I believe one of the motors in the other “Indian” videos has modified/enhanced coils to give more energy.
In actuality the modern motors and generators used here are full of mini resistors.
Thank you very much Chet!
Modified as in batteries added.
@@artofwarandpeace Why should they put resisors in a motor?
@@wurgervomlichtenmoor5073 Nevermind that, try the power of over unity and charge vs discharge ratio. 3 minutes to charge vs 30 seconds discharge means 10 caps to cycle the energy flow. Goes to a fan with Motogen tech
If you want the math problem, I have shown in it, it is possible in only coil Pluss magnets but cooling is need to not over heat the magnets, because magnet give voltage at the being, but with coil will give more variable control to the generator.
You should use a 12 volt motor with a battery as well as adding a alternator to charge the battery. Works better and uses less power to run generator. You can also use a solar system with this to charge the battery as well as a wind turbine. With this system you can run all your lighting off 12 volt and all your plugs and appliances off the 220 volt generator. Been designing and building these for years. Also, the reason it will die as soon as you plug in your motor to the generator is because you can not ground them together. This is why you need two different systems to make it work. (motor, solar, wind, water, or battery) By using a motor with a battery along with a 12 volt motor, with wind and solar it will work because you have a belt running the generator. Nothing running between them to ground them together. You also would want to put a rubber mat under both the motor an the generator so they do not ground by the frame along with some bold inserts to keep them from grounding through the frame. If you make these changes, it will work. Always keep trying mate. We never learn if we stop trying.
Thank you James! I am currently working on getting all the components for a much smaller version to see if the concept works. Will try the batteries suggestion.
Why would you include an alternator, this is a myth. If it worked, electric cars would include alternators and you would never have to charge them.
@@Bound4Earth Really, you do not say. That is the whole flaw of electric cars. Along with a few other flaws. I mean use common sense. You answered your own question by including the electric car statement. Use your brain. The other answer is you would not make any money in electric cars.
Thank You for the very helpful video. I have been looking at the same video's as you about these free energy generators the one thing I have noticed is the size and weight of the flywheels they are using, I is a 32" 120kg and the other is a 100kg and another is using 2x 200kg flywheels but can not tell what speed they are running them at, your 2x 45lbs weights convert to 40kg approx. So not carrying enough energy to keep it running.
Thanks Mark! Yes I have noticed that also but also keep in mind that most of them use a 10kW generator twice as much as my small generator. That’s why I assumed I should be ok with half the weight. The good thing about my design is that it can be scaled and I can add more plates. Just out of funds at the moment :)
@@MarkusNenning ... Scale it up & sell it to the power company. Then they can stop burning coal.
Greetings . The problem that all these systems have is that the generator has braking due to Lenz's law. There is a way to eliminate the braking and it is placing a switched source at the output.
Good morning, I have a VFD in which three phase induction motor is attached to and I have a capacitor bank to correct power factor lag. I want to know if it's a good idea to implement both power factor correction and a VFD? Thanks for your good work.
Some VFD’s already compensate for power factor and correct. Generally I believe that a phase correction will not improve the losses enough to make this generator work. But yes if you use a capacitor bank and you can verify with an oscilloscope that the phase shift improves then use VFD and capacitor together.
Waiting for next free energy video
Yeah, he just wasted our fucking time for nothing,just a bunch of nonsense talks and generic jokes,GGGGRRRR😡😡😡😡😡
If he does not make a fully perpetual motion magnet motor free energy device within 60 days, he and his children will face me on his doorstep(!), bECAUSE AM DONE WITH ALL THESE FUCKING BULLSHIT NONSENSE FAKE OVERUNITY,,FREE ENERGY AND MAGNET MOTOR DEVICES ON KZhead,BECAUSE IT’s JUST NOTHING BUT PIECE OF SHIT,,FUCK DAMNIT😡😡😡😡
@@johneysupergd7796 yeah i wanna see what adjectly happens. In Pakistan an Indian are lots of making this type video.
Free enegery genergy works, but not completely free, we give less input get more 2 times more output, here we need to consider and use less rpm PMG , use bigger flyfeel, approximately per 1kw 40kg weight ,also use gear systems, also one more method, less rpm PMG ,bigger diameter gear, like we give more torque by less force, ( force *distance) , for eg .. We use extension rod for open a hard nuts, same hand ,same force, by increasing the distance of the rod we get more power
Thanks for the feedback!
How about using Halbach array setup to ultimate the magnet repulsion in one side would it help push the magnet in one direction ?
I really like your vedio it difference to another. You have shown all involving theory that effectively to the system.So cool.
Thank you Phana! Glad you like it!
Mr Nenning, you're engineering and manufacturing capabilities are impressive. I am a pursuer of free energy and have tried many configurations of magnet motors and other devices. The one that showed the most promise for me was the Luling motor out of Germany. I don't believe the online plans and info to be entirely accurate though, so I made a few carefully considered changes. Is there any way you might consider doing a project on it? I wholeheartedly believe that this design has the potential to deliver more energy than it requires to operate, but it will take a precise and steady hand to produce it. Let me know please. Thank you!
Hello Harold, first off all thank you for the kind feedback! And yes I am interested in doing a project on it. If you could please send me more information on it so I can do some research on what kind of material is required. Connect@verde350.net
@@dusan78 I have tried to plug everything up to a toaster and several high wattage equipment. I have also plugged in a second motor into the generator that uses more power than the one powering the generator. That is proving that the generator is able to produce the required output. I am aware that a generator under load works like a break. That except concept is used in semi truck breaks and electric cars. I have not given up yet. Thanks for the feedback though.
888
@@dusan78 thank you very much for your input. Appreciate it!
@@dusan78 Yes, while I agree with your statements except it seems that you're not considering the addition of inertia wheel (mechanical battery). Here is possible scenario, at 1st step the motor, inertia and generator reaches the desired speed and stabilize. Here generator has no load. Next, the motor is unplugged from energy source for couple seconds. Entire system still spinning/maintaining. Next, the generator output (current) is plugged to the motor input. Now generator tends to slow down due to the load to run the motor. As generator is connected to the inertia wheel, if large enough the drop in speed is negligible and it is the driver of the system. So generator is feeding the motor. Next step can be adding load to the generator. It will follow the same logic as previous step as long as load is not heavy enough to reduce the inertia speed and not exceeding capacities of motor and generator. I'm not saying that it will work for sure but it is a possibility and must be proven. Here it seems the key is to find right relationship between the motor, Inertia wheel and generator. I'm not in electrical engineering, so not knowledgeable about motors and generators behaviors. It won't work based on classic physics
They used a 4 pole generator, which runs at half the rpm. Notice their pulley ratios, he tells the sizes. Do the math and you’ll see the ratios. Yes free energy exist, well that’s what a friend told me. There are many other ways to do it also. Off balance wheel, self pumping water wheel, permanent magnet motors, and probably a few others. Or so a friend of mine told me so. FYI, you don’t want to patent anything considered free energy (over unity). Best wishes and hope you get it.
Thank you very much wynoose66
I wonder if you would get a visit from men in black and possibly disappeared for exposing such tech on KZhead. Dear government- I'm just a curious casual having a convo with other people. I'm dumb AF and wouldn't know the first thing about tech like this. Thanks for your concern and here's my 2 finger salute: ✌️
Here if your generator is make voltage out running without a charge to start it, a couple charge capacitors could get it started and kept, because most coil motors need a charge to start the out put of voltage. Two you need to cool the motors because the high the pull the higher is the heat. Electric gel pump using the shaft to pump it to the motors, use a auto oil cooler for the radiator.
Great job you are doing!! Keep this up! It is possible!
Thank you very much Achor!
Can you explain Infinity Sav or Amber kinetic? That would be a nice video.
Thanks Artowar I am actually not sure what direction to go DIY or something in this direction. Thanks for the idea!
@@MarkusNenning I did some diy attempts to couple of different ideas in motor/generator topic. I can suggest that 1. there is no point in spending a lot of money on something that might not work (unless you have a lot of money and purchase of machine that does not work as expected is no problem). 2. Do a lot of experiments on basic components (self made windings, magnetic mechanisms and distribution of magnetic field in metals). Once you will be able to predict what strength of magnetic field you can achieve with inductor of certain size and winding numbers you will be able to understand all electric devices better. 3. Get an osclilloscope, magnetic field measuring device (up to 2000mT scale) and an Arduino microcontroller 4. Familiarise yourself with control of mosfets and microcontrollers its easier than most of people might think 5. In my opinion the most efficient generator that can be made is coreless - axial flux architecture (every stator core will attract the magnets on rotor and that will always cause loss of kinetic energy that is why I think coreless stator allows for maximum possible efficiency). 6. High efficiency generators ALWAYS require high precision and good quality components (good bearings, shafts and stiff and precise stator structure (this can be achieved with machined plastic)) if any gearbox is used then there always be some energy lost on gears - simple power transmission is best. 7. High voltage-low current devices should heat up less so high efficiency should be easier to achieve. 8. All the time spent on such projects will be wasted if there is nothing that we can learn from it for the future. If you understand principles of electric motor types and design you will gain something out of your project even if you wont achieve overunity and this is the most likely scenario. Ive seen really top class experiments carried out by the best diy experimenters and only some of these experiments were showing sort of energy gain but it can always be a measuring error. 9. Last thing is to get equipment for precise power output measurements. If you wont be able to accurately measure how much power is flowing out and how much is flowing in it will always be a guess work and not a proper experiment that proves something.
@@Kapalek84 thank you very good advice!
@@MarkusNenning good luck!
Select a permant magnet generator with lots of poles. "Lenz law" is why text books will tell you loading a generator with resistance of motor spinning it will not work.. no matter a flywheel or not. Example turn a car alternator by hand it spins easily...now connect headlights to it and it will be impossible to spin by hand as so much electromagnetic braking this is called a lenz reaction. No 1 problem to overcome in a motor generator system. You spoke of phase shift in sound, there can be a phase shift in time of manifest of electromagnetic back forces in generators that cause the lenz braking effect. Lenz only happens when generator is loaded with an electrical load. The time period it takes to become a strong enough reverse force on rotation of generator rotor is the time period you want a rotor of permanent magnets to rotate into position during this time period so that the rotor is pushed forward in rotation, speeding up rotor rather than pulled backwards, slowing rotor. Basically the time lag of the electromagnetic back force (lenz reaction) occurs precisely according to speed of rotor of permanent magnets so that the magnet that induces power into generator coils is not the one directly underneath the coil being induced, bit the UPCOMING rotor magnet of a reversed polarity, or the leading edge of upcoming rotor magnet in rotation of rotor rather than trailing edge. Now the generator rotor will speed up under loading instead of braking. Now it's possible to "loop" motor and generator and pull the plug from wall. Study RomeroUK Muller generator on KZhead. Study Thane Karl Heinz delayed lenz effect on KZhead too. So much fake free energy stuff on KZhead it's hard to find what's real. They do this on purpose to flood it with disinformation. Try a pancake washing machine motor for both motor and generator Samsung brand or fisher and paykel brand. Get them with 36 poles. You have chance of looping and having free energy motor generator with them. No chance with generator you have now as it will brake like crazy when loaded no matter what. The pancake motors much more efficient motor than what you have too.
There's a free energy in Singapore that can absorb all the energy all over the place, it's atomic energy
Thank you for a great video,DON’T GIVE UP, I strongly believe it can be done and I am working on something similar. Thank you again for such an informative video.
Thank you very much for your kind comment! And no I won’t give up. Just got myself a used car alternator to try a different approach. Good luck with your project!
@@MarkusNenning car alternator doesnt work..i already tried and using permanent magnet it doesnt wortk..i will try what you started..
Ok good to know cause I was gonna try that myself to modify a car alternator. Thank you Jonathan!
Please keep up with the awesome work.
Thank you fassphoto I will.
Please let us know as soon as you finish it . We really need to know if this thing will work or not. If it's really gonna work I am going to make one.
Dream on.
@@jb-xc4oh everything is possible .
@@best_technician Now that's a tall order..!!
Wind-powered alternators are low rpm. The larger the diameter the slower RPM''s needed to produce power. The pullies should be configured to work as leverage. 1:1 does nothing. DC motors are more powerful. A bridge rectifier from the alternator to DC motor works like a charm. From bridge rectifier to Ultracap just makes sense. The stored energy should be enough to run the DC motor and it is instantly charged by DC power coming through the rectifier. PS don't listen to engineer dude, he never invented anything.
Thanks John!
I just want you to thank for almost highly imformative explanation ever. I remember when I was a teenager. I had watch about some of the project of Mr. Langley. He is the one of the person who inspire me... as a follower count me as one of supporter as mankind is concern... Again Sir Thank you....
Thanks very much Mhar!
Finally... Waiting this Video come up 🤩
Oh yes!!! VFD variable frequency drive to run the drive motor!! high frequency = less amp draw! but i dont think its ever going to work on flywheel and motor alternator setup alone.. you need to use a battery (or a bank of expensive supercaps) to drive the motor and use a generator to rechage it at the same time! So here is the catlist in my opinion : Motor Generator Flywheel VFD Variable frequency drive for drive motor Battery to power the motor Inverter to step up DC from Battery to AC for drive motor
This guy is a faker
Yes agree would be nice to have all this components to experience but out of my budget at the moment. Thanks!
@@dominicgeorge7299 what is it that you think I am faking? :)
@@MarkusNenning please research gerad Morin, also Patric Kelly, there's a Nigerian plus an Indonesian ,they all show the real way That producing free energy with a generator is possible, I personally like the one from Nigeria you get a detailed description plus demonstration, your video makes it look like the claims are fraud ,please contact gerad Morin with your camera and interview him show him your videos, stop trying to distracted people
@@dominicgeorge7299 thanks i will check them out.
I don't know if you know it seems to work well .. Electromagnetic Generator - Prototype for 10kW - KZhead Video - Infinity SAV Daniel
I think our Indian friends have done precise calculations and also they have modified the generator and the motor according to Tesla and Tom Bearden theory. People have patents on these devices. You have to find out what the modification is...Great work!
Thanks Lazar! Perhaps I need to take an other look at it
Thanks for the effort.
Thank you!
"The laws of thermodynamics are often cited as the reason we can't have sustainable energy. But is that really true?" *Answer to your question* The Laws of Thermodynamics do not prevent you from creating sustainable energy. We have lots of examples of sustainable energy that do not contradict the Laws of thermodynamics. For example Solar Panels, Wind generators, Wave motion Generators, Thermal Generators, and electric Dams. None of these go against the Laws of Thermodynamics. However, when it comes to making claims of over-unity and free energy devices, then they contradict the Laws of Thermodynamics and therefore are not possible. *1st Law of Thermodynamics* *1.* Energy Cannot Be Created or Destroyed. If you can't create energy, then how can you have a higher output power than input power after going through all the losses (Heat, Friction, Lens Law,... etc). Since everything has losses and you can't attain a minimum of 100% efficiency, then free energy devices are not possible. Some people who have little background in Science or Engineering will claim "Laws are made to be broken." What they don't understand is that these Laws are not created by us, but by the Universe, we live in. IMO, it's more advantageous to work on improving efficiencies and other forms of sustainable energy, rather than try and build the impossible.
Thanks for the feedback Valveman12!
work on improving efficiencies, I have been saying this for years?!. for example, combining these ie solar, wind and hydro maybe even battery storage for peak hours etc. I mean just how many solar panels could the Hoover damn hold? These damns create massive amounts of air flow from the water coming off the damns, so catch that. You mentioned wave gens, there is another. Just how much could we upgrade the infostructure that we already have?!...
@@joespruill6447 exactly! The question is why is it not done already? The energy sector is a greedy business!
@@MarkusNenning It is just the only one's brave enough to invest is big money, like Elon. He saved Australia's power grid for a while. It's just going to take riskier investors and there has never been a surplus of them. They are the ones that make the biggest returns though...
You done great job Mr. gentleman 👍
Thank you!
Have you looked at RC brushless motors, they can produce a lot voltage when spun, and there are some real beasts about now
nice attitude mate. may you success in your free energy project
Thank you very much Prabha!
Nice pivot from the last video on this topic. Harnessing photons from the great everlasting fusion reactor in the sky is the simplest way! maybe have some flywheels or compressed air or batteries or water heat (or elevation) for storing the excess energy for nighttime use.
Thanks Sean!
I am as an engineer! The free energy generator can produce electricity for a few minutes, but the air resistance, the fraction, the gravitational force, these factors act on the free energy generator and finally stops the free energy generator. But if we calculate for the equation and keep some energy storage in between (I mean a powerful battery) in this way we can get power for long hours
IMPORTANT: Try this out. I once had seen a paper that had information on how to build a FREE ENERGY/MOTOR GENERATOR. The motor/generator once started would keep running and you would get Free Over Unity Electrical Energy .The person had used Permanent Magnets and Electro Magnets with High Voltage Capacitors. With electro magnets and capacitors you can have a controlled magnetic field that stops the moment the capacitor is drained of its energy. With an all permanent magnet system you need to physically move one of the magnets away from the other or you get a clogging effect where motion of the rotor stops. By using electro magnets and capacitors or super capacitors you can have a controlled intermittent magnetic field. You can control the magnetic field with by an optical switch or better still with a solid state Hall Effect Sensor Switch. The electro magnet can be used as a generator to recharge the capacitor. You may need a diode to ensure the capacitors get the proper charging polarity. By switching a magnetic field on and off you can stop the clogging effect therefore the rotor can keep on turning and keep gaining momentum.
Interesting concept. Thank you
You need a high effency 3 phase motor that goes high RPM with a motor controller. 3 phase motors have way more windings in the motor than single phase motors. And you should be able to dial in the speed and so on.
I agree Thank you!
Loved this. Thanks, man. And I love that blockchain patent idea...
Thank you very much Warren!
Agak pusing memahaminya tapi aku suka dengan video ini bisa menambah ilmu saya.... 👍👍👍
Try with very low RPM permanent magnet alternator and keep rotation higher than it's rated rpm of alternator
Great video. I really enjoy your channel.
Thank you Craig!
Can't wait to see part 3
If it doesn't work ! it's not your fault!! love he way you put everything together!
Thanks Michael!
It's great to see someone prove that free energy is a dream for now✨️ But sometimes, dreams do come through.
Excelente trabajo. 😎👍
Thank you!
You will need a flexible cuplink that will limit the vibration from shaft to shaft
Hello `` Stylish Guy DIY '' It was with great pleasure that I watched your 2nd video on the subject of free energy. It is made with humor and intelligence ... great .... I find the idea of the download platform interesting. Too bad I couldn't be of great help to you, because, watching your video I realized that it was beyond my competence. In any case, I would be happy to follow the rest of your research. Good luck for the future.. (Ps: i'm french and i don't know your language, i use google translate, hope you can understand me) Regards, Daniel
Thank you very much Daniel!! What a nice gesture to translate your comment! Very much appreciate it!!
@@MarkusNenning With pleasure
Exelente tu idea
Good to see that this concept is finally comming to fruition. The finer technical aspects that are needed is where the patents may come to play. This general concept is now considered common public knowledge and hopefully voids patent rights. I hope.
Yes I agree But I also think that renewable energy is such an improvement topic that it should be open source. Priority should be environmental concerns over trying to make a lot of money with a energy invention.
@@MarkusNenning I believe that this free energy sources should be nationalized not privatized because we can't rely solely on limited energy sources like fossil fuels bio fuels coal hydrogen and lithium ionic energies those are problematic
@@MarkusNenning reusable energies are not as reliable as free energies because they run out over time meaning (AndI'm not saying all people are victims of this) that at the wrong place wrong time where you can't find the reusable elements your stuck and if your phone has no energy or you can't find anyone who's can help your totally screwed then
Интересно, а на русском можно сделать данный видос?
looking at your set up and a variable speed controller would work on the primary motor as used in electric cars!!
its good starting, the generator need to be permanent rotor ! or using a battery or cap connected to the core field
Neodymium permanent magnet generator could help to make more possibilities in energy generation efficiency
keep us posted on the generator's progress
Well, two things for you, 1) How about solar generators, and 2) How about creating an online and/or in-person classes to teach them to make videos such as yours. You did a Fine job. I appreciate that you figured this out, now I don't have to buy all the parts. I saw a video where the person used a gas powered lawn more to move the shaft of the electric motor. You have a flywheel in the middle. So if you used a drill to turn the shaft on one motor, does it generate power? Is so, this is what you have to do. I have a motor and drill, guess I'll have to try it before infesting any more money. Thank you.
Thanks very much glad you like my videos! I would love to teach people how to create videos unfortunately I have a full time job and no time for it. And yes the lawn mower motor would definitely be able to create power with this system.
Hi If use ceramic bearings to reduce friction and different home build generator whit ceramic bearings
You have a generator running that uses ceramic low friction bearings Augustinas? You have a video by chance? Thanks!
Hii Markus, I found your page while searching for free energy generation on the internet. My question is, how can I rotate the 650KVa alternator? Can you help with this. The diameter of the flywheel, how many KW motor can I rotate. It can be belt system or reducer.Can such a powerful system be built? Thank you very much in advance
Hi Dursun unfortunately I am no expert in this field. I still have not even figured out myself how to get my system to work :) Sorry I can’t be of any help
Is there a part 3 in the works? I think it is possible. Just needs the right parts and assembly.
Yes there will be a part 3 once I have it working. Thanks Michael
Can we use gears to increase the speed of the fly wheel?
Use big Capacitors to generate a resonance frequency in the generator. The voltage amplitude will show a resonance rise effect. Push the amount of rpm beyond this resonance frequency. Then the system will balance itself because when the resonating generator is slowing down the resonance rise voltage will go up. Fase angle adjustment during the switch will save energy during the switch period and prohibit shock effects. It will function as a stable energy storage which on a short video looks like free energy. With a solar panel or wind turbine you will be able to ad energy to the system which you can use at a later moment.
Interesting idea thank you Eddo!
@@MarkusNenning No thnx, Pay me with a percentage of your future business 🙂I lack the time and space to work it out for my self. I like to do experiments in my head😂🙃
@@EddoRats if I ever have a working unit and make some money with it I’ll share :)
You are a F'KING Legend!!!!! Top notch, please share your knowledge and ideas as you are doing now!!! Awesome!!! And thank you!!!
Wow thank you DePistolero! Very Much appreciate it! I will try my best! :)
To whom it may concern. Over Unity Electric Generator Design: By ☯AMA☯ Segment 1: 1 motor with hollowed bar connected to it standing vertically. Circular disc connected to bar that has magnets embedded in it's top side all around, surrounded in high permeability material to focus magnets outward pushing force in an upwards direction from top of disc. Segment 2: Hollowed out cylindrical Bar of material horizontally positioned. donut shaped platter that's flattened on all sides instead of rounded, all around the flat edge of this platter, from the center is a ravine in the center so structure looks more like 2 donut shaped platters flattened on all sides & sandwiched together against a smaller donut shaped platter that's flattened not rounded & between them both. Square openings are located all around the outside of platters edge on both sides & goes all the way through material. In these openings rectangular magnets surrounded in high permeability casings are slid into place all around platter in a matching pattern on both sides. N facing in then S facing in. Connect these securely all along the length of the horizontally positioned bar except at far ends and center. At both ends of horizontally positioned bar securely connect a ring of material that can be magnetically repelled (This will allow bar to spin when apart of completed construct) Build a hollow ring structure that has ring of magnetic repulsion around its inner ring that will be able to fit around main horizontally positioned bar and keep it from touching anything on account of the bar sitting on its magnetic field inside the ring. The ring structure has a rectangular bar protruding from it's outer edge & has small square platform on end of it that will allow it to be screwed in to another structure. Make 3 of these ring structures & position them (approx) over both ends of horizontally positioned bar & around it's center. Build hollowed out rectangular encasement that is separated into 2 pieces that can be placed on top of each other and screwed together. This encasement will fit over horizontal bar & everything that is immediately around this bar. Encasement needs areas all along it's top side that has screw openings that all structures inside that need to be fastened down will be able to screw into. (Best if encasement is transparent) Encasement has round opening at both ends so when in place horizontally positioned bar with round magnetically repel-able disc attached to it are sticking out. Build hollowed out ring structure (flattened not rounded) that has a hollowed out rectangular bar that protrudes from top and bottom of ring and has square platform at end of each that will be able to screw into inside of encasement on top and bottom. Ring structure should be able to separate into 4 halves (from middle separating top & bottom & from side to side on each) that sit on top of each other & side by side perfectly connected when encasement is closed. Hollowed out aspect of ring structure & it's protruding hollowed out bar that's connected to it is for conductive wiring to be placed so that the copper coil constructs not mentioned yet will be able to plug into this ring structure and the current can be diverted up through the hollowed out area to a point where another device can plug into it. On bottom of hollowed out ring structure there are openings where copper coil constructs can be plugged into. Build wide but small ring with ravine around its outer edge in center (kinda would look like the round metal piece you would see in a pulley system but not angled in) of structure (flat not rounded & not hollow in center). Copper coil will be coiled around this. Build hollowed out rectangular structure the length of the width of the wide small ring structure. Build a plug system within it so at the center of the rectangular structure it has proper electrical plug poking out that will be able to plug into bottom side of larger ring structure that is designed to divert current. At both ends of small rectangular plug system there should be flat rectangular legs hanging down so that you can fit it perfectly over center of small wide ring structure that has copper coil wound around it & screw openings at bottom of these flat rectangular legs so they can be screwed together. Ends of the copper coil are fed up into the plug securely. With wiring in place screw top halves of ring structure together still separate from bottom halves. Then with wiring in place screw bottom halves of ring structure together. Now screw the already connected top halves to the inner top encasement structure & same for bottom halves. Two main encasement structures still disconnected at this point. (Fine point... there are as many of these ring structures with copper coil constructs plugged into them as there are the magnetic disc constructs lined up across the length of the horizontal bar) This is because they are all to be lined up. Now with everything ready carefully lift up the Horizontal bar with the magnetic disc setup securely attached to it. At this point the magnetically repelling rings that are at far ends and center of bar should be hanging freely. Carefully position this whole thing in the bottom encasement so the copper coils are positioned perfectly in the ravine of the magnetic disc area connected to bar. Line the free hanging magnetic rings that have rectangle bars and square platforms up with the inner bottom of encasement and screw them in. At this point the horizontal bar is sitting on the magnetic fields in the rings and is securely in place connected to bottom encasement. Now pick up the top of encasement and carefully line it up the same but on top & then screw the top encasement to the bottom encasement. If lined up properly you will see that when the horizontally positioned bar is made to spin, the magnetic fields will interact with the coils that are perpendicular to the magnetic field lines and since the copper coils are positioned to hang withing the ravine, the magnets on both sides will magnify the effect to achieve greater results & since the magnets on both sides are set up N then S all the way around it will end up being AC current. At this point you may be wondering how will this ever equate to over unity? well we are about to get to the part that makes that possible. Build cylindrical structure (like a donut but flat not rounded on all sides but still hollow in center like a donut). The cylindrical structure is built in 2 parts. Top part & bottom part. Bottom half has a ridge close to bottom center area that circles around further into the center but not all the way in. On top of this ridge is a flat ring of high permeability (magnetic field shielding) material that has small openings that will allow magnetic fields through specific locations. The top flat side of the 1st part has rectangular grooves cut into it that go almost the entire distance from outside of cylindrical structure to hollowed out center. At both the outer edge and inner edge it instead cuts down sharply & narrowly at just over the width of the horizontal bar. This way when the horizontal bar in it's encasement is sitting in this spot the case fits down in and bar slides down in with a little extra space but the encasement can't shift forwards & backwards. The top half of cylindrical structure has same groove but no extended ridge going further towards center. Fill the rest of the rectangular grooves with duplicates of the electric generator construct. Now carefully position top of cylindrical structure in place and screw it to bottom section. Now position the motor segment with the vertical bar that has discs on it in center of cylindrical construct so the disc is lined up perfectly underneath the inner ridge that has the flat ring of high permeability material fastened to it. Now you can duplicate this whole setup and stack it for more electrical output. (The only thing that would need to be duplicated with the motor & vertical bar setup is for you to add another disc with magnets embedded in it, higher up on the vertical bar you are already using). When you turn motor on the discs will spin and the magnetic fields on them will only interact with the discs on the horizontally positioned bars when the magnetic field lines go through the small openings in the high permeability material. Since those openings are lined up with the edge of the discs connected to the horizontally positioned bars, it will force them to spin, effectively generating lots of electrical current. Just make sure to let enough of that current pump energy into the 1 motor you are using to run things, and the rest of the electric current is over unity. If you are still wondering how this could end up being over unity, the answer is simple. The device exploits magnetic field effects connected to the vertically positioned bar connected to the motor to have them do all the extra work so the motor does not have to. And since the magnets are exerting there force upwards while the bar spins around sideways, the motor won't be getting a detrimental amount of push back. This design invented by ☯AMA☯
You have a video of this?
maybe the solution is to use the generator positive with the external neutral or negative, does that reduce the weight of the generator?
Hi Markus If I do not have electricity in the area to be able to start the generator it occurs to me to have a battery bank with AC / DC inverter only for starting after the generator comes into action, the charging stage is activated to maintain the batteries. I think it is a great project and I want to assemble it because I am in Venezuela and here there are many electrical energy problems. Greetings.
Yes that should work once the concept itself works. Hope you’ll be successful! Best of luck!
Thank you so much broo I made this energy power machine
Thanks! Do you have a video of it by chance?
I Thank you for good clarification,but what if we try pumping water to height with electric pumps the generate Electricity by hydro(potential)
and is it possible to use a capacitor bank ? for giving a constantcity to motor?
In my opinion not Fahim. The reactive power is not the reason it doesn’t work.
@Baker Perez horton thanks!
Puli in generator and the puli mounted on free wheel is big And pully mounted on motor and puli mounted on free wheel for motor is small Both generator n motor same kilowatt That is 2 diff pully size in free wheel
como exemplo eu descobrir uma forma de usar essa energia sem uso de maquina, o amigo poderia me ajuda nessa questão?
What program does the A.I tech use to optimize best outputs and trading solutions?
python financial modules can be used to build a customized AI for algo trading algorithms.
Wiring must be correct. Mechanical RPM must be correct. The phase of the motor rotation must be slightly behind the electrical phase of the generator, or in the natiral running angle without the belt holding the wrong angle to the gen. Your first video looked like there was EMF braking happening, as if it was wired wrong.
🤔thank you Rich
Wow, you really went off the deep end on this video. I admire your perseverance. Your right in the fact that this process is controlled by the law of thermodynamics. No disrespect but the math doesn't work the way you think. You'd have more luck going after zero point energy, at least it's theoretically possible.
Thanks Jim I will have to look into that have not heard that term “zero point energy”
Maybe if you change magnet's in motor/generator for stronger neodymium. It should help.
please tell me where you got the weight (flywheel)? thanks CW
It’s regular 45 pound weights for weight lifting. Just make sure you get the machined ones so that the inside bore is accurate.
In both cases there is success. Drive the motor with solar energy or rotate the weight wheel with magnetic force. Attach metal covers to the back of both magnetic wheels to prevent Losing magnetic charge.
Thanks Muhammad!
Thanks for your nice explanation, you did better than others, but in the end, well get same same result " No free electricity "
Thanks Nabil!
I am very excited about your internship 🤗 i hope patents will change the price or not we must do like your saying. If I can help you with something look at this video I like the way the motor is made. I will send you the link
Good video friend idea for have laiht in home or for machine or car etc thank from Argent
Thank you Alberto!