Linebore of D-9 Dozer rear Idler wheel shaft.

2021 ж. 7 Там.
1 032 008 Рет қаралды

Follow along as I Linebore a rear idler wheel shaft on a D-9 Dozer. There arent too many videos on lineboring so hopefully this does it some justice. Enjoy.

Пікірлер
  • Whatever you charge it is not enough. A machine that size being down and repaired in the field saved that company a boat load. Your skill is amazing. Waiting for your next video. Adios

    @headhunter4488@headhunter44882 жыл бұрын
    • Can you imagine what the "tow bill" would be just to haul it who knows how far to a Cat dealer? And then theyd prob want to replace the whole track runner on that side at an exhorbent cost (and probably weeks of downtime too). I really feel like this is one of those jobs, you quote your rates, then triple it just for the lifesaving effort you delivered to the operator of that machine, and it would still be well worth it to them, and cheaper.

      @JasonJonesPhotography@JasonJonesPhotography2 жыл бұрын
    • @@JasonJonesPhotography not necessarily. I work for a CAT dealership and we have a field welder/line bore guy. Yes, he would prefer to do it at the shop but can easily accomplish it in the field.

      @SuperSecretSquirell@SuperSecretSquirell2 жыл бұрын
    • @@SuperSecretSquirell Poppycock! Your CAT employed line bore guy would look at that and say "Piece of cake, that's easy" even if he did say that and fix it easy he'd be an anomaly to say the least. The above comments are not far off from my experience.

      @PAYNEKILLER..@PAYNEKILLER..2 жыл бұрын
    • @@SuperSecretSquirell Your guy must be a rarity amongst CAT Dealers site service personnel. Most of them are just bolt-on, bolt-off, kinds of people.

      @markfryer9880@markfryer98802 жыл бұрын
    • These kinds of repairs are always done in the field! It's very common. Do you think he should deliberately overcharge the company because they're rich? I'm sure he charges what he deems his skill is worth.

      @mattdillon4398@mattdillon43982 жыл бұрын
  • Can't say I've ever seen anyone operate in the field at this level. This man is truly gifted where welding machine work comes in.

    @giggiddy@giggiddy2 жыл бұрын
    • He's not just a welder. He's managing to encompass a couple of trades in that on-site machining process. Kudos to him and sincerely hope he demands what he's worth for that type of work.

      @brustar5152@brustar51522 жыл бұрын
    • Yep he's good at what he does... however there are a lot of guys doing what he does and at the level he's doing it. It just takes a lot of experience and money for the tooling.

      @chadkennedy529@chadkennedy5292 жыл бұрын
    • It's quite common actually.

      @mikeznel6048@mikeznel60482 жыл бұрын
    • It's not that unusual when you work on a construction site everyday with heavy equipment like this running around. There always seems to be one guy on every job that is bad ass at fixing very broken shit.

      @GT-43@GT-432 жыл бұрын
    • @@GT-43 Probably because he has a lot of mates working with him who are bad ass at breaking stuff!.

      @markfryer9880@markfryer98802 жыл бұрын
  • Isaac, I could watch your videos all day,every day,thanks again for your craftsmanship 👍

    @terrminatoragain461@terrminatoragain4612 жыл бұрын
    • I appreciate that!

      @ICWeld@ICWeld2 жыл бұрын
    • @@ICWeld thank you for putting up the shield for the camera. It was cool to see the arc while you were welding.

      @JoeAroner-SIWAYTV@JoeAroner-SIWAYTV2 жыл бұрын
    • @@JoeAroner-SIWAYTV Yes, and it worked very well.

      @scottl485@scottl4852 жыл бұрын
  • That qualifies as a pretty damn incredible field repair.

    @jondavidmcnabb@jondavidmcnabb2 жыл бұрын
    • This required more tooling and time of course, but that trailer king pin repair he did was incredibly difficult and awkward compared to this repair.

      @opendstudio7141@opendstudio71412 жыл бұрын
    • @@opendstudio7141 where is that video? I don’t see one.

      @MustObeyTheRules@MustObeyTheRules2 жыл бұрын
    • @@MustObeyTheRules The title is "Try this with a torch": kzhead.info/sun/aNKNf71weWaOimg/bejne.html

      @opendstudio7141@opendstudio71412 жыл бұрын
    • The guys who are the top of their game usually talk about it like it's no big deal what they're doing, but that was pretty incredible.

      @MrRaincoast@MrRaincoast2 жыл бұрын
    • @@andraecarter76 no ones hating dumbas$. I asked for a link to watch another the video

      @MustObeyTheRules@MustObeyTheRules Жыл бұрын
  • Been hanging out for this video! I think the customer got his moneys worth out of that part 🤣 Top notch repair mate as always 😎👍

    @CuttingEdgeEngineering@CuttingEdgeEngineering2 жыл бұрын
    • You can learn something from anyone, but you can learn a *lot* watching this man work.

      @jimsvideos7201@jimsvideos72012 жыл бұрын
    • I was watching the repairs been made and I was thinking what CEE would think of it. It's amazing what both of you do with the repairs you accomplish.

      @jerrycann6374@jerrycann63742 жыл бұрын
    • @@jerrycann6374 Me too, for CEE. I recall that video where he's setting up this rig...Sir Meccanica and a CAT789 part and that IC needs one of these...but actually doesn't!

      @xoxo2008oxox@xoxo2008oxox2 жыл бұрын
    • I was thinking of some of your video while watching this one.

      @chrisbolton4900@chrisbolton49002 жыл бұрын
    • Was just going to comment how I'd seen this type of repair on your channel... You're both top notch in my book!!!

      @n7565j@n7565j2 жыл бұрын
  • Welding an extension to a buried broken bolt from the inside of a piece of pipe is something I never thought of. Great technique.

    @gregwarner3753@gregwarner37532 жыл бұрын
  • Bolt extraction was next level genius! Then you break out the Mobile Line Boring Machine...WOW!! Well done...

    @Akfordmn@Akfordmn2 жыл бұрын
  • I'm still amazed how such repairs can be accomplished in the field. Nice job. Thumbs Up!

    @garymucher9590@garymucher95902 жыл бұрын
  • I worked as a millwright and I had a shift partner like you, he could fix almost anything with a welding machine, awesome talent, enjoyed the vid, cheers!

    @howder1951@howder19512 жыл бұрын
    • Lemme guess. Gorden W ???

      @muimasmacho@muimasmacho Жыл бұрын
  • I enjoy watching a man at the top of his game. I always wonder how the hell did things get this bad before they decided to fix it or even discover it. But then I always remember I have a really good business as you do because of these circumstances.

    @yt650@yt6502 жыл бұрын
    • I think once that idler bearing piled up it didn't take long to eat that out, perhaps just a couple hours

      @Rx7man@Rx7man2 жыл бұрын
  • This should easily be one of the most popular welding/machine repair channels on KZhead. Incredible work in rough conditions.

    @josimon6229@josimon62292 жыл бұрын
    • Glad you liked it!

      @ICWeld@ICWeld2 жыл бұрын
  • Thank you for making this video. I can almost hear the conversations, before you arrive on site "This is major!" "Don't worry, I'll call a fellow that I know." "He can fix anything, stand back and watch, there's always the danger that you might learn something" I always learn new tequniques by watching your videos; Great work.

    @benjigray8690@benjigray8690 Жыл бұрын
    • Thanks bud. I'm glad you enjoy them. thanks for the support.

      @ICWeld@ICWeld Жыл бұрын
  • Man, I have so much respect for the way you are working. I've seen KZheadrs with huge shops and all the tools you can possibly imagine and still are not as creative as you are or as determined as you are to get the job done. You have yourself a new subscriber because you are a joy to watch.

    @MrYukon2010@MrYukon20102 жыл бұрын
    • I appreciate that!

      @ICWeld@ICWeld2 жыл бұрын
  • Wow I really enjoy this learning experience. Tools are just metal until they are in the hands with knowledge. Well done.

    @davidmunro1469@davidmunro14692 жыл бұрын
  • I can't wait to show my 75 year old father this. He use to work for Lincoln Electric and has been in the welding / fab field for a LONG time, he'll really enjoy seeing a true master like you. Very nice work.

    @BarnStangz@BarnStangz2 жыл бұрын
  • As an industrial electrician I've had the pleasure of working with a few welder/fabricators like yourself, and even at 72 , I never get tired of watching this kind of craft-art work. Very nice job Sir.

    @brianwood7480@brianwood74802 жыл бұрын
    • I'm 74 operator a guy Line bored the dead axles on my old D7E 68 model dozer didn't fail

      @dennisholst4322@dennisholst4322 Жыл бұрын
  • It's always nice to watch a pro at work. You can tell how much of a pro they are by how easy they make the job look. I'm sure that you are in high demand due to your talents. Thank you for a great video.

    @donbullock8790@donbullock87902 жыл бұрын
  • I follow Isaac's channel and Kurtis from CEE and it is amazing to see these two professionals work. One in the field (mostly) and one in the shop. Both with the same skill set and half a world apart!!

    @maverick5006@maverick50062 жыл бұрын
  • I an an accountant by profession but I've always been fascinated by work such as this. I do get my hands dirty in the evenings and on weekends repairing things but this is high level stuff to me. The setup and wrap up look to be rather time intensive. Nice work, sir.

    @dapsapsrp@dapsapsrp2 жыл бұрын
  • One great thing about your job is it never gets borring because its never the same problem. It's challenging every job!

    @keithhill9138@keithhill91382 жыл бұрын
  • Always amazed, impressed and wowed by what you are able to fix. Removing broken bolts, welding in different positions and then using a tool to actually machine a circular bore in the field . Very impressive and cool.

    @cleenlivin@cleenlivin2 жыл бұрын
  • I couldn't believe this! That is not normally a field repair! In addition to being a top notch welder this man is a contortionist, reclining in a cat-like position underneath the part. On top of it, the video is excellent and one can really learn from it. Thank you, Isaac!

    @BruceBoschek@BruceBoschek2 жыл бұрын
    • Yes it is! They repair these types of things in the field all the time!

      @mattdillon4398@mattdillon43982 жыл бұрын
  • Absolutely fascinating to watch... mind blowing watch you build that destroyed threaded socket for the regular bolts using the brass... then that portable lathe using the bore of where the wheel was going to go to center the cut with that portable lathe? Fantastic stuff. You handle it all so swiftly and masterfully... You are a master at your Art... and with you... it is an Art. Thanks so much for sharing. Bravo!

    @robertironside3166@robertironside31662 жыл бұрын
  • Love your broken bolt removal technique! I’m looking forward to trying that myself one when the right job comes in. Awesome repair man! 👊🏻

    @Abom79@Abom792 жыл бұрын
    • Your channel is why KZhead suggested this one! It is funny that in my head I was using your voice to describe the machining part of this video!

      @jorgyr36@jorgyr362 жыл бұрын
    • @@jorgyr36 I C Weld I click like :)

      @hardwareful@hardwareful2 жыл бұрын
    • Abom!

      @Zerostar369@Zerostar3692 жыл бұрын
    • Yeah that was so satisfying to watch it come right out. Anyone who's ever dealt with a broken bolt knows what that means

      @getchasome6230@getchasome62302 жыл бұрын
    • @Abom79

      @figgoagogo@figgoagogo2 жыл бұрын
  • You make it look so easy.. Years of experience and skill.. Thanks Isaac.. Hope you and your family are well.. Just around the corner :)

    @DK-vx1zc@DK-vx1zc2 жыл бұрын
  • What I love is that he'll include some basics right beside the high-level repairs. If nothing else - now we all know what type of dog is required to 'supervise', which I didn't know before!

    @Le_Comte_de_Monte_Felin@Le_Comte_de_Monte_Felin2 жыл бұрын
  • Just love to watch you work. In Australia we have Cutting Edge Engineering who does in shop excellent work including line boring and now we see you doing it on your back in the dirt!! A privilege to be with you on site.

    @peternicholsonu6090@peternicholsonu60902 жыл бұрын
  • I have got to the stage with your videos now that I wait for you to describe and show the problem and then pause and make a note of how I think you will proceed. I am getting closer but you still never fail to amaze me. I have not seen the weld the inside of the pipe to the bolt head trick before but as always, one more trick I can add to my rapidly growing skill set. The other thing is that you do all this in the field, come what may and do it so damn well. Your skill set is awesome and your videos are the best learning tool out.

    @gordonagent7037@gordonagent70372 жыл бұрын
  • Giving it a thumbs up for the bolt extraction technique alone. I never would have thought of that. Definitely keeping that in the back of my head for the next time I need to do that.

    @SuperSecretSquirell@SuperSecretSquirell2 жыл бұрын
    • And in the meantime, sourcing suitable pieces of pipe to fit inside common bolt threaded holes.

      @markfryer9880@markfryer98802 жыл бұрын
  • It’s a pleasure watching and learning from such a skilled craftsman. I had no idea one could repair damage like that in the field. Just a fantastic job!

    @guyforlogos@guyforlogos2 жыл бұрын
  • Dear gawd! I was a recent graduate (1965) of the Royal Canadian Navy's Engine Room Artificer program, working after my hitch release for Hafer Tool and Fabrication co. in Victoria B.C. I was approached by them to perform that exact process to a mine shaft elevator headstock pulley shaft at Morphee Lakes in the B.C. interior. The multiple ladder/landing climb up to that shaft was bad enough but having to hand haul the equipment and a power cord up there at the end of 150' of rope was exhausting. Performed the job, reassembled the headstock and assisted the mine workers to re-string the elevator cables then waited on site for an inspector to approve the elevator for operation. Got a heck of a bonus cheque for that job and had all but forgotten about that nightmare operation until watching your vid. My back started aching all over again! Nice job.

    @brustar5152@brustar51522 жыл бұрын
    • haha sorry about that. :)

      @ICWeld@ICWeld2 жыл бұрын
  • You are definitely the master of the disaster. Never cease to amaze or disappoint. Thanks so much for sharing your experience.

    @tomc2748@tomc27482 жыл бұрын
  • Amazing field repair. I am always impressed by your work ethic and your bag of tricks. Damn few real repair guys operating in this world with your level of expertise.

    @mikechimko8564@mikechimko85642 жыл бұрын
  • Good lord, my jaw dropped a little when that sleeve stuck in the slot you machined all on its own. Talk about a perfect fit, in the field no less. Nice work.

    @hgbugalou@hgbugalou2 жыл бұрын
  • Amazing, ISAAC! Dress right dress workmanship! Can’t believe the in the field machining you did! WOW! Fantastic job! I’m sure the customer was extremely satisfied with the work you performed and the boatload of cash he saved! Well done BROTHER! ⭐️⭐️👍⭐️⭐️

    @rustydodge6167@rustydodge61672 жыл бұрын
  • I was impressed by the method used to extract the broken end of the holding bolt...welding up the middle of a piece of pipe in that circular motion...First Class !

    @GARY-ks3qc@GARY-ks3qc2 жыл бұрын
    • And blind to boot. Have heard of welders who could weld by sound and feel, but first time I have seen it in practice

      @wrstew1272@wrstew12722 жыл бұрын
  • Thank you again Sir you do amazing work. My father was a Millwright in a steel mill for 36 years. His department maintained a cold drawn seamless tube draw bench. One of two in the world at the time. It could produce seamless high pressure steel tubes up 12" od and 40' length. He would have loved your videos. Have a good day.

    @shackman1306@shackman13062 жыл бұрын
    • That is awesome!

      @ICWeld@ICWeld2 жыл бұрын
  • MASTER Isaac, you my friend, are amazing. Everybody knows you can fix anything and could be why some things get to that point of damage. You are truly, one in a million.

    @omrjordan4847@omrjordan48472 жыл бұрын
    • Grand Master

      @fredscheerle7592@fredscheerle75922 жыл бұрын
  • I've been following Kurtis at CEE, great channel, now I'm glad to say I've subscribed to your channel. I love watching men working the trades. Good job

    @ThomsSimpleLife@ThomsSimpleLife Жыл бұрын
    • Welcome aboard!

      @ICWeld@ICWeld Жыл бұрын
  • You never cease to amaze me with your broken bolt extraction methods! 👍👍

    @Watchyn_Yarwood@Watchyn_Yarwood2 жыл бұрын
  • Wow. Great fix! I literally yelled out loud with amazement "No way" when that bolt started turning out of there. I would say luck...but it's obviously skill.

    @gibsonbuilds4841@gibsonbuilds48412 жыл бұрын
    • It's always like that when you first see it done! Then it just makes so much sense as being a really good way to fix the problem.

      @markfryer9880@markfryer98802 жыл бұрын
  • Excellent bolt removal technique , a well earned 'that's so cool' . One to store away for the inevitable rainy day. As always, a pleasure to watch and learn , come away feeling a bit smarter every time. Thanks for your time.

    @mineown1861@mineown18612 жыл бұрын
  • WOW! Another great video! You never fail to educate and awe me with your skill and knowledge! I retired after 32 years as a Nuclear Grade Steamfitter Weldor LU 598 Pasco Washington. I did some Pipeline Welding in my youth also for Banister Pipeline Co. I use to see heavy line mechanics working on broken Sideboom Cats in all conditions Rain Snow Dust Heat my hats off to guys like you Sir god bless and keep you safe!

    @walterwhitaker1395@walterwhitaker13952 жыл бұрын
  • I worked on heavy equipment for 40 years witch included having a lot of welding and line boring done. Your work is as good or better than anyone I have worked with. Very good job.

    @greggriewahn7944@greggriewahn79442 жыл бұрын
    • Thank you

      @ICWeld@ICWeld2 жыл бұрын
  • You have many skills. Area is fortunate to have you available for repairs. Educational and enjoyable.

    @PoteauCowboy@PoteauCowboy2 жыл бұрын
  • This repair is impressive when Kurtis, Cutting Edge Engineering does it in his workshop, but doing it in the field, another level entirely. Respect

    @paulcharman44@paulcharman442 жыл бұрын
  • You do not thank us for watching your videos, Isaac; we thank you for sharing your craftsman-engineering skills with us.

    @peteacher52@peteacher522 жыл бұрын
  • They way you got the bolt out was a great idea, with all the work you done and brought it back to life is nothing short of Amazing!!!

    @hank5655@hank56552 жыл бұрын
  • 😲 that was a really neat repair. Thanks for sharing the process!

    @SouthMainAuto@SouthMainAuto2 жыл бұрын
    • Hey bud, I watch your channel too! Love your content

      @getchasome6230@getchasome62302 жыл бұрын
    • South main auto repair , Awesome channel too

      @figgoagogo@figgoagogo2 жыл бұрын
  • It's amazing how much you can do in the field: welding and machining to repair worn journals. Great work, I enjoyed watching and learning.

    @jeffryblackmon4846@jeffryblackmon48462 жыл бұрын
  • I’m amazed by the work you do! That whole process!! Just imagine what you saved that company! And how you made that “lathe” in place!!!! WOW. JUST WOW!!

    @shabo857@shabo8572 жыл бұрын
  • I haven't watched a Boring Job that wasn't Boring at all in quite a while. Thanks for sharing. Those line boring tools are very useful, once they're setup they work wonderful.

    @micmike@micmike2 жыл бұрын
  • For us welding noobs this is next-level genius.

    @RustyRogers@RustyRogers2 жыл бұрын
    • Mars-level genius.

      @deadslow201@deadslow2012 жыл бұрын
    • Yeah I'd probably keep that to myself lol.

      @GT-43@GT-432 жыл бұрын
  • As a machinist & instructor of the trade I always advise students to take welding courses also here at our community college. I am very proud of you IC weld & CEE Australia for having very interesting & educational YT channels. Keep up the good work.

    @byronlabelle7569@byronlabelle75692 жыл бұрын
    • Thanks for sharing

      @ICWeld@ICWeld2 жыл бұрын
  • Wow. In the field repairs like this are amazing.

    @bseddonmusic1@bseddonmusic18 ай бұрын
  • Your vids hit so much closer to home now that I'm the welder for a heavy truck and equipment rental company.. Get crazy stuff like this in daily, amongst the many, MANY jacked up buckets and other attachments coming in off rental. Why do they rent, cause it ain't theirs.. Job security at its finest.. Good work brother.

    @garykirk1968@garykirk19682 жыл бұрын
  • Amazing repair, as always. Looked worse for wear at the start, was intrigued how you'd approach it. Must say, you didn't disappoint! Joy to watch, can't wait to see more.

    @YangTang_89@YangTang_892 жыл бұрын
  • A portable, weld-on lathe... pretty cool stuff, I had no idea there were such things. I'd have thought the whole thing would've been taken to a machine shop, with a milling machine or something. That's amazing work.

    @bobpowers9862@bobpowers98622 жыл бұрын
    • That process has been around for as long as there's been rotating parts within fixed housings. Knowing how to use it is a whole 'nuther thing entirely. He's good at it.

      @brustar5152@brustar51522 жыл бұрын
  • I know absolutely nothing about this type of work but it was fascinating to watch.

    @corydriver7634@corydriver76342 жыл бұрын
  • Wow that stuff never ceases to amaze me..I assisted an old fellow many years ago do a similar repair on an upright mast, mount on a 50 thousand lb forklift. long before we had the video advantages we do now. It is now and was then a marvel to me . thanks for the video. Well done

    @ottoscorch@ottoscorch2 жыл бұрын
  • A master of his craft.

    @Dimythios@Dimythios2 жыл бұрын
  • I wish we could have seen the line boring set up real-time. You must have used that fancy caliper to fine the center. Thanks for making these videos. They are so much fun to watch.

    @kilipoheikekanilehua4049@kilipoheikekanilehua40492 жыл бұрын
    • Yeah, I'm not sure how he lined it all up, but how I would have done it (In Isaac's own words "It might not be the right way to do it, but it's how I'm going to do it"), I'd have bolted on the caps and used the bores on them to indicate my centers, there may need to be a preload or gap, so might need to shim them out a touch.

      @Rx7man@Rx7man2 жыл бұрын
  • The pipe to get the broken bolt out and welding inside it, brilliant. Every video you do I am amazed yet again. Thanks for sharing what you do

    @farmcentralohio@farmcentralohio2 жыл бұрын
  • I rarely comment on these types of videos, but I watch a lot of them. This was one of the coolest videos I have seen in a long while. Really great work!

    @ATedu@ATedu Жыл бұрын
    • Glad you enjoyed it!

      @ICWeld@ICWeld Жыл бұрын
  • Thanks for the new video from the master! Really enjoy watching and learning

    @johnmcgreevy742@johnmcgreevy7422 жыл бұрын
  • Very professional repair! There are very few guys out there that would tackle this repair in the field. Thanks for sharing 👍.

    @johnw4590@johnw45902 жыл бұрын
  • It's a pleasure to watch you at work. Excellent job

    @hfraat25@hfraat252 жыл бұрын
  • I really love seeing how you get stuff done and the way you work mate.

    @luked237@luked237 Жыл бұрын
  • Great job. Those needle scalers are a lifesaver.

    @bombardierparts@bombardierparts2 жыл бұрын
  • Absolutely love watching your videos. Your skill and knowledge are impressive.

    @04ninjazx10rr@04ninjazx10rr2 жыл бұрын
  • Very nice job. Lineboring is one of those things that you don't understand is important until you try to put something together that should have been bored but wasn't. "Hey, that pin doesn't go through right!" Great video!

    @markreetz1001@markreetz10012 жыл бұрын
  • Unbelievably fun to watch. Watching you work is like Zen Meditation for me. Seeing a Master work his magic on something so complex in the field and make it look easy. I just enjoy that so much....especially in a world filled with fools who are in charge of everything and driving us off the edge of existence. Thank you so much for this!

    @kittypigeonclueless5566@kittypigeonclueless55662 жыл бұрын
  • Absolutely amazing repair in the field. True professional of his craft.

    @mikeengstrom8260@mikeengstrom82602 жыл бұрын
  • I'm continually amazed at what you achieve - quite remarkable - great bolt removal trick and the line boring - well, that is something else. And as so often, this is all out in the field. :)

    @ChrisB257@ChrisB2572 жыл бұрын
    • Glad you enjoyed it

      @ICWeld@ICWeld2 жыл бұрын
  • Wow, your skills are amazing! I really enjoy your videos. You are a great teacher! Very patient and you have a good sense of humor. Blessings to you and your family.

    @trippinwithtracy687@trippinwithtracy687 Жыл бұрын
  • THIS MAN CONTINUES TO AMAZE ME WITH HIS EXPERT CRAFTSMANSHIP AND FRIENDLY MANNER...

    @jumbleman@jumbleman2 жыл бұрын
  • I definitely want to see this. You have a professional attitude about your work.

    @humancattoy7767@humancattoy77672 жыл бұрын
  • Done a pretty amazing job on the repair, in the field no less. Getting into Kurtis from CEE territory with that repair lol.

    @t_r_b8842@t_r_b88422 жыл бұрын
    • Curtis would have to leave the shop if he wants to compete haha. Both are very talented though

      @mikef6879@mikef68792 жыл бұрын
    • Was gonna say the same thing. A very CEE-type challenge, sans "safety inspector."

      @weevie833@weevie8332 жыл бұрын
    • Kurtis does the easy stuff. He machines, he welds. He doesn’t deal with the parts on the machines, he even whines when they are dirty. Isaac just does the job, and gets them running.

      @madjimbo4176@madjimbo41762 жыл бұрын
    • @@madjimbo4176 To be fair, shop repairs are normally done at a better quality than field repairs. I can’t blame him on the dirt, it’s got to be clean to work on it

      @t_r_b8842@t_r_b88422 жыл бұрын
    • @@madjimbo4176 you really can't down play either when both are at the top of their game. I don't blame Kurtis for bitching about people not even taking the time to clean stuff before taking it to him At least they don't whine and complain about every little thing like abom does 😂

      @LukeA_55@LukeA_552 жыл бұрын
  • Always loved the lineboring process, we had a bucket linebored in the quarry few years ago, very interesting, great video respect from the 🇬🇧

    @dalewoodham2588@dalewoodham25882 жыл бұрын
  • It would have been awesome to see the driver reaction to your work.Anyway you're awesome as alway,keep it coming my man

    @fookutube501@fookutube5012 жыл бұрын
  • That was an interesting adventure, looking forward to the next one.

    @LitchKB@LitchKB2 жыл бұрын
  • I've been doing mechanic and maintenance work for 25+ years, I did not know that was a thing, the line borer, that is. Very interesting, I thought you were going to "machine" it with the gas axe!

    @lorka42@lorka422 жыл бұрын
    • He might have been off by a couple thou if he used the gas axe

      @Rx7man@Rx7man2 жыл бұрын
  • Brilliant repair you saved them a fortune and that Linebore machine is a great piece of kit to have in your tool kit your skill at welding is like an art great job .

    @colinsmith6280@colinsmith62802 жыл бұрын
    • Welding isn't an art, its a skill.

      @mikeznel6048@mikeznel60482 жыл бұрын
  • Loved watching that! I've spray welded build up on some tractor shafts and then turned new dia. And then later in life at boat building, I line bored the main engine shaft in custom machined bronze bearings, struts and stuffing boxes. Also line bored the rudder post in the same manner. I used a 20' 1 1/4" bar stock for my tool holder with a 3/4 hand held drill. Yeah, that was some torque. Had a kid at the other end turning a screw for my feed. Love your line boring machine.

    @KennyP88@KennyP882 жыл бұрын
  • Oh, man 😎 just right before bed time I love it 😎

    @NenadKralj@NenadKralj2 жыл бұрын
  • That was super interesting, thanks for posting!

    @jamesbruno5896@jamesbruno58962 жыл бұрын
  • You Sir, are a very talented and superb craftsman. Give yourself a pat on the back . I hope your customers appreciate your work

    @johnmolnar2957@johnmolnar29572 жыл бұрын
  • Pure craftsmanship experience and talent doing real work - it’s the best - we all thank you for taking us along - noted CEE comments you are both top notch from across the globe - you redeem utube.

    @rupert5390@rupert53902 жыл бұрын
  • Welcome to my World! I didn’t know you did line boring. Tedious, painstaking precision work, but it pays good.

    @PatriotWeldFab@PatriotWeldFab2 жыл бұрын
  • very cool love seeing the techniques

    @shaundavis8522@shaundavis85222 жыл бұрын
  • So glad I found this channel. I've gotten so many ideas from here on how to approach repairs I do..invaluable !!

    @wxfield@wxfield2 жыл бұрын
  • You’re not a welder. You sir are an artist! I love your work. Really enjoy watching your channel.

    @Johnditit@Johnditit2 жыл бұрын
  • Very nice work you are a master!

    @jandsmarineservicejimfromd4994@jandsmarineservicejimfromd49942 жыл бұрын
  • Turned out great, again!!!

    @RickAShriver@RickAShriver2 жыл бұрын
  • The lineboring was fun watch. Your skills are incredible I do enjoy your skills. Texas Delbert

    @delbertbrown6381@delbertbrown63819 ай бұрын
  • Its always awesome to watch another tradesman, especially one thats clearly at the top of their field.

    @JustFixIt99@JustFixIt992 жыл бұрын
  • If his channel was Pulp Fiction, Isaac would be the Wolf.

    @scottl485@scottl4852 жыл бұрын
  • Very impressive Isaac. As I watched I could see the multiple set screws along the boring bar, quite versatile. How deep were you cutting each pass, looked like 10-15 thousandths, but hard to tell on video. I'm assuming the depth gauge kept track of each pass to the full depth and that is a cool tool. You did the line bore justice for sure!👌

    @gwbuilder5779@gwbuilder57792 жыл бұрын
  • Just found your channel! Marvel at your welding skill and calmness while being so precise. Also, love your truck and how well you take care of your equipment.

    @jackmiyamoto5270@jackmiyamoto52702 жыл бұрын
  • You are a guy with GOLDEN HANDS. Greetings from Russia .

    @ebat-kopat-tj2ef3ve2r@ebat-kopat-tj2ef3ve2r2 жыл бұрын
KZhead