Windshield repair long crack

Thank you. Great job showing before and after. The end result is the most important part. You can barely see any cracks.

This is by far the best video ive come across to repair a long crack. Thank you

what an excellent video. Great commentary, effective camera handling and no Umms, "like", etc. Great job on making this process be easily understood for us DIYers who don't want to spend $$$$ on having someone else fix cracks.

Ill try this...this video is by most far helpful in repairing long cracks. I bought a DIY repair kit and will try this method.

Thoroughly explained, and you did fantastic job!

Great repair!!

@Crack Attack Auto Glass You did an awesome job, you took your time and I'm glad I got to see the Crack Resin from Glass Technologies in use, it performs very well. And I normally use a Lighter on chips and cracks to cure the resin and to seal it. but the UV light is the best option for it with the proper amount of heat. Also the Q' Tip is a good option although i believe it sucks up too much resin than what is needed, and the rest goes to waste. I recently acquired the set of 3 crack jacks from GT tools and dont know if they are placed right on the crck or on the side. Great tip on keeping the injector on the pressure cycle when filling in cracks. High 5

Very helpful. This is great. Thank you!

I recently had a small chip on my windshield that turned into a long crack. I called a local glass repair shop for help. They drilled a hole at the end of the crack but didn't fill it as I expected. Instead, they applied resin all over the crack with plastic film to cover it. Unfortunately, the crack continued to grow even after paying extra for the "repair." Feeling frustrated, I searched for solutions online and came across your video. Your method seemed logical, so I called the shop again letting them know the the crack continued to grow they told me to bring it in the next day, I suggesting we make another hole and use a windshield repair kit with resin applying resin with a q tip. However, they dismissed the idea and were unwilling to try it, they said they don't work that way in their shop. So, I asked them to simply drill a new hole for me, and I would handle the repair myself. When I got home, I used a windshield repair kit and carefully applied resin along the crack with a Q-tip. It took some time, but the results were much better than what the professionals did. Although the crack isn't completely invisible, it's a significant improvement. I wanted to thank you for sharing your video. It truly solved my problem. It's unfortunate how some so-called professionals can be arrogant and dismiss good advice. While I thought about showing them my successful repair, I believe their ego might prevent them from accepting it. Thank you again for your helpful guidance.

Best video for the long cracks!!

Thanks for the info you share..

Great video bro

Good job. How i wish i saw this video before attempting to diy my windshield. This helps alot like using the qtips and and the pressure from inside. Do you have any video about drilling?

Keep it up bro

what if you have a horizontal crack, do you need to drill?

i wish i came across this video before i started repairing it

Amazing video for pro grade crack repair! I do feel for curing removing the jacks would be better, as after removing the jacks the windscreen is back to its actual curve shape and will expel excess resin. If you care it with jacks, there will be some pressure on the screen forever (not saying it will result is something superbad) so maybe its best to have the glass in its actual form without nay tension embedded.

very nice job sir.

Hello, your video is very good, I admire you very much, I also want to have such a repair equipment, can you help me? Where can I buy it?

do you think this can be done again, I noticed there is some air in certain areas of the line?

Thanks for your efforts in catching up with the focus, imagine it’s a patience trial, but we would have much more action if you’d have rather used a steady phone holder or similar!

Do you always have to progress from bottom to top when repairing a crack?

Mine still shows but it's about 60 percent better than before. Wonder if I put more resin. It's a hairline crack about 12 inches that curves. It won't spread since I drilled the holes perfectly.

Do you need to inject for a small star crack or can you just use the qtip with resin to repair? Do you have video showing star crack repair. Thanks for your help

I got that same bridge

Nice one

Great work. When are you coming over to the UK , my Lotus needs it’s crack repaired? Excellent video, explained well with no rush and lots of confidence. This man knows his stuff. What was the make of the liquid you used?

Thanks for the video. It's possible to make this repair without the crack jack ?

Thank you for one of the best videos on spider crack windshield repair. Odd question: if the chip that created the break was from the inside, do you have to seal the cracks from the inside of the windshield, or do you still treat it from the outside? I feel like if there is a coating of some sort on the outside of the windshield, the resin may not penetrate…but I also think if it is cracked, then it is cracked through and through and you could repair it from either side. Thoughts?

Great video .. I have the same if light but my is a 12 v and have the cable is ur a rechargeable ..? Where did u buy urs..?

Cue tip is the key

I want to buy this because I need this immediately

Can long cracks be repaired with out the jacks? Where can I buy them? Do you have links where I can buy a kit?

The tape you use is 3M transparent tape ? How about showing us how to drill fella. The tools you use are what type and glue what is best ??? Nice video too.

I notice you dont use pit filler on top of the filled crack. Does that ever cause issues?

Hi there, could this method prevents the windshield from cracking further?

Could you use this same method for a crack on the inside of the car? My windshield is cracked both on the outside and in

can you provide links where to get the tools / materials?

How can you get the resin to fill the crack with the Q tip? Doesn't there have to be pressure so that the resin can get down in there?

What do you call your injector and where can I buy it?

What resin brand do you think is the best?...And why?.....

Did you drill the tip of the long crack or no? I get advice on both sides of that process.

🙌🏼

This is just perfect fixed

Do you clean the windshield before this???....also how do you feel of a 3 year old crack from side to side

What kind of tape do you use?

Hello sir can you tell me the liqeuds name or its link please?

Would you still repair the crack if it was an old crack?

Cqn you tell me where I can buy this ?

Approx how much this repair goes for? Thanks

How can i get this stuff plz

Paano po tanggalin ang dry resin from car paint without damaging?

I need this repair bad

What is weeking please ? You said it a few times.

Delta kits 100% I have 3

What kinda tap is that in the vid?

How can you tell if a crack is on the outside or inside?

Hi there, thanks for posting this video, I tried to repair my crack but there wasnt enough sunlight, and the resin is all cured now. Ie I ruined my diy windshield repair. My question sir is how can I undo this repair?? Thanks

Can I use regular scotch tape

I don't see the utility of the injector, everything the cotton did

Hopefully the crack on my windshield stops and don't keep sgrowing at least until next winter, the price for a replacement is $1000 dlls (yes I have insurance but it's a @#$%) I must pay in full.

Fresh crack is the best!😃

WHAT THE HELL IS A CRACK JACK AND HOW TO USE IT>HIS EXPLANATION ABOUT THE TOOLS HE IS USING IS NOT HERE>