Zipline PROPS Look CRAZY! So We MADE Them | Free STL Download
We reverse engineer FPV props from the Mark Rober "Zipline" video. Follow along as we design, 3D print, and fly (eventually) these crazy looking propellers.
Download the FREE 3MF and STL files here:
f.io/SNpuKg5Y
Fusion 360 Software free trial:
www.autodesk.com/products/fus...
Prop Balancer: amzn.to/41N6mG6
Putty (weight) : amzn.to/3omCbHs
PLA: amzn.to/3MWWV2L
PETG: amzn.to/40sOejM
Printers:
Bambu P1P (New Favorite)
us.store.bambulab.com/product...
Prusa MK3s and now MK4s (The OG Beast)
www.prusa3d.com
Ender 3 (Affordable, yet great)
amzn.to/41lZnEq
---------------------------------
0:00 - Intro
0:49 - Design
1:41 - PLA Props
2:23 - PETG Props
2:56 - Annealed Props
6:54 - Flat Printed Props
7:33 - Flight?
---------------------------------
Gear we use:
**Some of the following are affiliate links and pay a very small commission but do not cost you any extra...
Transmitters:
Hollyland Mars 4k here:
amzn.to/3Cx4QOA
Main Camera:
Sony FX3 - amzn.to/3MTVdvm
Sony A7iii - amzn.to/3MSYn2C
Lenses:
Sony 20mm f1.8 (Full Frame) - amzn.to/3O7h5oe
Sony 70-200mm f4 (Full Frame) - amzn.to/3mNj99c
Sony 35mm f1.8 (Full Frame) - amzn.to/3xUngH4
Irix 45mm Cine (Sony FF)
Camera Bag:
ThinkTank Retrospective Camera Backpack
Rotation 22L-50L Camera Backpack
www.thinktankphoto.com/?rfsn=...
Drones:
iFlight Nazgul Evoque - amzn.to/3BnDiJv
DJI Avata - amzn.to/3e3KiE5
GepRC CineLog 35HD - pyrodrone.com/products/geprc-...
Shendrones Thicc
(These are HD drones and require a pair of HD Goggles, and a Controller)
GoPro Hero 10 Black (for FPV shots) - amzn.to/3b0YV9e
Lighting:
Sun - Amazon hasn't purchased it yet...
Colbor CL60R
link.colborlight.com/CliffKaj...
Nanlite Pavotubes
amzn.to/3QiQWEZ
Godox VL300 - amzn.to/3Qs1QZ8
Audio:
Rode NTG series
Software:
Davinci Resolve
Adobe Premiere Pro CC
Adobe After Effects
Photoshop CC (Thumbnail):
UPDATES: 1. Fusion tutorial on props is up: (We went with toroidal since they are the most complex) kzhead.info/sun/ZK6JfcuQfqmXqK8/bejne.html 2. There will be a follow up video including resin printing, salt remelting and other methods mentioned. 3. There will also be a live stream to cover some of the comments and take advice. The feedback and tips have been amazing! Thank you for all the advice! We will be going through the comments again very soon!
Try silent computer fans that have a band around the circumference of the blade tips. Should be a simple modification of the shaft connection.
Two things: I am getting an injection molding machine and might be able to work with you. Second: would you be interested in an conversation on a novel application concept that I have using a drone?
0:15 Zipline's props are streamlined, have a long stem for a smaller counterweight and interference with the blade-generated vortices, and look like a larger angle between the blades. 7:57 yours aren't quieter because you've missed at least two design parameters that Zipline used.
Can we even get our hold on that design pramater or zipline managed to witheld them from public pretty well
yeah, i think the zipline folks mentioned wingtip vortices as a contributor to noise, and the ends of the blades on this one are not very optimized.
Yeah, you definitely can't trial-and-error these into silence with any amount of parameters. They likely developed the Zipline props with CFD to do something like destructive interference to cancel out noise.
oh, more bs... *sigh
>you've missed at least two design parameters that Zipline used. what are they?
NOT THE SPACE X EXPLOSION 😂😂😂😂😂😂😂😂
Haha, good catch! It happened the same day we edited this. I had to throw it in there 🤣
😅
Do you think they'll have Big Bird on that flight this time
The creator of APC props was a RC plane guy at my club in the 90’s. We all were part of his product testing efforts fun times. He made them in his garage using a resin molding process. The 3D printed stuff today is really just proof of concept and mold making blank capability of which we didn’t have in the 90’s. The zip line prop concept should generate just as much thrust as a similar surface area standard prop as long as turbulence from the leading blade isn’t affecting the trailing blade. I will say that the foil shape at the root of the blade was found to have a large impact on the prop performance at various RPMs. The blade tip also can affect performance especially if the blade flexes under load. The APC props have a unique root foil and rigidity for a reason. Each prop use / profile be it Pylon Racing, aerobatics, general sport flying evolved into a unique foil design due to the performance differences and speeds the aircraft we’re running at. Drone props are massively ripped off designs in many ways to each other by the typical Chinese manufacturer. I haven’t really seen any drone props that are really engineered to a level we see with Zipline based in California or even what we did in the 90’s with our club member who created APC props in California 😆. Is there a need for real foil design in drone props? Oh heck YES!!! The trash I see being run today on drones is like our wood hand carved props we flew way back in the day😆.
That's very interesting, and I'm sure it would have been a cool experience! 3D printing really is just a great proof of concept/prototype medium with some limited production uses. Makes a lot of sense. Most of our fpv drone props are extremely flexible (with the exception of our cinelifters) which is great for crashing, but I'm sure it is also a tradeoff in performance. I'll have to look into the APC props a little more. Thank you for the detailed explanation, it's really helpful 🤘🏼 Lol, this is so true. The copy and paste method of manufacturing is getting out of hand 😅 I'd love to see this become more mainstream. You've sparked my curiosity and I'm definitely digging into this soon. Thanks for the info and detailed comment! 😎🤘🏼
I love APC Props!
Ah, also...on this design we are more than DOUBLING the rotational mass for no additional lift. Who's tried just running props with more surface area? Assuming we are going to sacrifice for "quiet"...how much is too much sacrifice? You guys are going to drag me down this rabbit hole. 🤦🏼♂️
APC had a terrible tip airfoil....and I knew Fred too. We raced giant scale.
a very large range of speeds does not allow to be a good propeller for drones, it’s just that somewhere it’s better, somewhere worse, in general, we will still get the same average value, if we do not take into account a certain category.
PLA is not the weakest. It's stronger than PETG and ABS. The reason people like PETG is for durability, which is quantified by the Izod notch toughness test. The issue you're really running into with the orientation you're using though is inter-layer adhesion. FDM prints are highly anisotropic, which means different material properties in different directions. I'd recommend SLA printing for prop prototypes as they are far closer to isotropic. They're also far higher resolution to capture the propeller airfoil most accurately. Good luck
I suspect PETG has higher through-layer axis strength than PLA but your point still stands.
Yeah the layer binding in PETG can be very high. Like PLA though it's rather brittle. For FDM I'd probably go with PC for this application, but it would be interesting to see how some of the less brittle resins hold up too.
Resin printing is going to explode the second the motor starts.
The second it started printing up I knew this would be an issue. Granted lying down it would have lots of supports but on it's side you should be able to get only supports on the very edges of the blades and that's much eaiser to fix/sand. Also nothing stopping him splitting the design into 2 or three parts that lock together reducing the supports even further.
@@TheAxebeard depends on the resin ie: Siraiya Tech Strong
My take from the zipline video was that the two blades were also not identical. This meant that the sound each makes is at a different frequency so they don’t reinforce each other. Might be something to try for V2.
Such a nice video. Well paced. And no stress, just someone trying and having fun. Great! Subscribed.
Thank you! I really appreciate the kind feedback, and welcome! 🤘🏼
My initial thoughts (after designing, printing, testing, iterate) is that you are printing with stacked layer being normal to the axis of rotation. Hence the instantaneous destruction or RUD (Rapid Unplanned Destruction). You realize this at about 3 minutes into the video. I printed both the TriLobe and DuoLobe (3 blades and 2 blades) for a DJI Mini laying flat, slowly, 0.12mm layer height, without supports (sliced with both Cura 5.3.1 and Prusa 2.4.0-alpah-alpha6). I tried PLA, PLA+, PLA+CarbonFiber, ABS, and NinjaFlex (TPU). PLA+ worked best for me.
Rapid unscheduled disassembly *
Finally someone made those props, great work!
Amazing video! You could try to "cast" them using salt powder. If you powderize salt, print with 100% infill you can than press the props inside of a brick of salt ( in a pirex container) and remelt them to form a solid object made out of one single matrix of plastic....
your videos are off the hook! I dont know if they are more informative than they are just plain fun!
Hey Dan!! Thank you, that means a lot! We are really trying to lean into the fun side and hope people will join us for the chaos that likely follows 🤣
Silent props… who would’ve ever thought you had great spirit through this 🎉 happy to see your creations
Haha right. Thank you!!
Well shot and edited. Entertaining as hell! 😄
Thank you!! We had a blast putting this one together 😎🤘🏼
One of our genius creative collaborators doing what they do best! Being creatively entertaining!💡
Hey! Thanks you 🙏😎
Great video! Super interesting to see you going through all the different versions and also just taking something you’ve seen from a video and just making it happen! Who knows where prop designs will end up in 5 years!
Thank you!! I'll have to admit, this video was more for me than anyone lol. Making the video gave me the excuse to keep experimenting with different versions 😅. It is pretty exciting to see all the new designs. I seriously am considering picking up an injection mold 🤘🏼
I think the stylized lines of the propeller help a lot, they are extremely balanced and the counterweight is flatter and longer
Awesome video! Entertaining and informative too!
Hey!! Thank you 🙏
There's a quick "Easter Egg" related to something that happened today hidden in this video. Comment below the time stamp and what it is and I'll include your comment in the next video. Hint: It's a full clip, not something within a clip. Cheers 🤘🏼
Starship at 7:00! Found your channel today, underrated stuff 👍
Yep, that boom was a nice touch!
Haha, nice work!! 😎 Thank you, that's really motivating!
Lol, I thought it would be a fun little detail 😅
try 3d printer resin it's much harder
Many tanks for the files, as I'll give it a try. Best - Michael
You're welcome! Have fun!! Cheers! Cliff
When you have a working shape, you can create a mold with two components silicon rubber, and cast them with special a resin. I did some propellers using prochima sintofoam (it's similar to ABS when catalyzed) and i added some carbon filament inside the mold before putting resin
Mad props bro 😁👌
Love to see a vid of your prop’s design process. I use Onshape but Fusion is cool too. Thanks for sharing a fun video. I reckon a mould might work…? Cheers!
Could definitely make resin printed molds and diy injection molding set up with say a drill press and hydraulic press/jack. Maybe even silicone 2 part molds and epoxy🤷🏻♂️
Assuming you have the AMS accessory for your X1, you should go for that dissolvable support you were talking about. You don't have to print the entire support in it, just the "interface". You may not even need to put it in water, it should separate more cleanly from PETG than using PETG support material exclusively. As for molding, you could make resin molds with silicone, OR you could use an mSLA printer to print injection molds and build a little DIY injection molding machine from a couple drill presses and simple electronics.
very good! Thanks for sharing!
If you want to do injection molding you can 3d print a mold. Use the high temperature stuff and print 100% infill then use lower temp plastic to injection mold. For an injector it is fairly easy to make one from low cost steel pipe. Make a plunger and a nozzle then use an Induction heater to heat the steel pipe. It will take some trial and error to get the temp right but you can easily and cheaply do it
I have designed and printed some 5" zipline-style props to compare against some other printed props for a project. I MSLA printed them in a mix of Siraya Tech Blu and Siraya Tech fast resin. The surface finish was good and they were almost balanced right of the print plate. So far they have managed to slowly ramp up to 23 000 rpm before exploding. I haven't tested the thrust yet but will soon. Just going off how much air they are blowing compared to regular props I assume it would be possible to fly on them but would need, on my 5" fpv quad, a throttle stop at about 70%. Maybe soon I will flight test them.
HELL YEAH EXCISION but seriously i love the presentation and style of the vid and a great music taste too boot! subbed!
HAHA yea! We fly for the Lost Lands live stream. The show is incredible! Thank you!!!
So last year I was building a quad and I needed this very specific set of props but they were all sold out every where and I was at my wits end until my printer looked at me in that way and I was like screw it let’s give it a go and through all of my prop explosions I learned a good way to make them strong with out changing the physical features of the prop like what might happen when annealing them I learned I could buy large amounts of ca glue for cheep so $40 later I found my self dipping my props in a bowl of ca on my front porch and letting the sun cure them and after that I just balanced them and they flew amazing well amazing for props I made my self but they were reliable and I flew the final version I made for six months anyways I really hope that you can have the same success I did and you have definitely earned a subscribe from me as I feel your pain😂
Great effort, I think the main facor in making these props quieter goes towards first spinning them slower. If you've ever built a giant 15inch prop quad you'd know how quiet they are compared to a 5 inch - just because they spin the prop at a much much slower rate to begin with they move all the noise and wasted energy lower down in the spectrum
Thank you! You have a valid point. Larger props are much quieter in most cases. We are going to do a follow up video where we will test 15" (ish) props. Should be interesting 😅🔥
Hi, for greater resistance have you tried putting UV resin on these propellers, applied with a brush so that it remains a thin layer I think it could strengthen the resistance?
Re: Injection molding. You can make limited-use injection molds for some lower-temp thermoplastics on a resin printer using special high-temp resins. You would still have to make an injector, but the resin and collars for printed molds are both sold at reasonable prices for people who want low-volume manufacture that's too much to be entirely 3D printed but not economically viable to have actual dies cut from steel or aluminum. If you do end up exploring this, have fun with it! HDPE is infinitely recyclable and might be strong enough to work - then you can make a video called "Making groundbreaking propellers out of laundry detegent bottles!" or the like
ModBot recently did a video on printing pla with petg as support material and visa versa. Gives a very good supported surface finish without marring. Might be worth a look.
exactly what I was thinking, but for that you'd need a material station with his printer
That's a good call. I've had decent results with this method. We may try this in the follow up video. Thanks!
Fortunately our Snapmaker 2 has the dual extruder module 🤘🏼
You could print a mold and do a carbon fibre moulding. Easy Composites have a video on how to do it. The makes a bike brake lever in the vid.
You need a X1-Carbon Combo. If you printed them laying flat to align with layers optionally out of PETG with PLA as the support interface it would give you a support that would breakaway cleanly and give you a much stronger part. After prototyping the concept use either PA12-CF or PET-CF with Bambu Lab breakaway support material ("Support G") if necessary. I find using 3 interface layers with a grid like pattern with the carbon fiber reinforce nylon blends you really don't even need the specialized support material. It comes off extremely clean. Your printer and material choices will make a huge difference in your success...I promise you that!!
Have you tried resin printing those props? They do ABS-like resins for printing and the result doesn't have layering to weaken the design.
We haven't yet, but just ordered a new resin printer for the follow up video. Thanks!!
@@CliffKajun awesome! I really like sunlu nylon like resin. It's got a lot of flex to it. It can be a little bit challenging to print with since it's consistency while printing is pretty stretchy. But for something like this where it's small and there's not a lot of stress on the material while printing it would probably be perfect. The nylon (pa) like can be hard to come by so an abs like is a good alternative (I like the sunlu abs like) Just for the love of God don't use a standard resin like elegoo grey or something. They are way too brittle. You're going to need something a bit more specialized
I was hoping someone mentioned this. I've been effectively 3d printing and using parts for professional projects since 2000, and although most of that time was utilizing FDM, I knew it was a deadend(layer weakness and detail/finish). The main reasons SLA was not utilized was a combo of price/availability and material quality. Not only has the price of it all plummeted in recent years, the materials have also come a long way. I now mostly use an Elegoo machine and water soluble resin, much easier to deal with than the alcohol stuff, but some of the more exotic and stronger resins are still alcohol based. You may need to try a few to find the best resin for this use, but if you do you may never go back to FDM. Especially if you can manage to print with little to no support structure, tricky but do-able, and produces the best 3d parts I've seen in decades.
A Fusion 360 design walk-through would be phenomenal. One thing I would try is resin 3d printing, since you can get much much finer layer lines and surface finish, even printing horizontally.
We are trying resin in the follow up video, thanks! The Fusion tutorial is up as well: Draw Props in FUSION 360 | Toroidal and Zipline kzhead.info/sun/ZK6JfcuQfqmXqK8/bejne.html
@@CliffKajun Do you have plans to make a design video for the Zipline style props? That's what I find super interesting
Most all cooling fans on vehicles are not symmetrical, the blades will still be balanced but spread out varying widths. It helps to quiet the percussion waves like you’d hear from a helicopter.
It’s not just what you use to print with but how you print it. You need to find the correct angle so that the layer lines are longitudinally their longest with less separation.
Could you not use off the shelf props, cut off and epoxied into a 3d printed hub? Or do the blades need to be shaped totally differently from standard ones? As others have said, the approach where you use 3d printing to make a mold might be the strongest option.
Tpu actually has some of the best layer adhesion for 3D printing.
Hello form north east Ohio. Very nice work!
Hello and thank you! O-H
You definitely will benefit from resin printing on this. Better surface and uniform performance of its materials in all axis. And yeah obviously not with standart resin it will be even more brittle)
Yea that seems to be the general consensus. Any resin you recommend? Thanks 🤘🏼
Are these props scalable, as in, can you scale them down and put them on smaller quads? Or does the aerodynamics get all weird when you scale them up or down?
Could make a channel inside the props, shove a metal wire coated in epoxy in there. The metal wire will hold it together better, and the epoxy will slightly shrink (and mate the two materials together). Additionally, you could get a slightly conductive filament and electroplate something onto it. (Might have luck resin printing a micro lattice, for lots of surface area for the electroplating to deposit material on. Would have to be sparse unless using a electroless plating solution.)
Nice! I'm glad you made this. I wonder if a 7-10" prop could be made for stealth long range drones.
Potentially. 10” would be better if they are durable enough. Oversized and slow makes a huge difference even with normal prop designs.
Awesome Video, I really like your sound design. Can you tell me which song/sound you used for background music while printing/drawing. 2:10
I think the best approach would be to use a 3D printed prop for making a mold which can be used to mold something more durable in one solid piece e.g. resin.
This is the way 👆🏼😎
I would assume that lower frequency is still an advantage in that lower frequency noise tends to be less obvious/dissipate better from far away outdoors, accomplishing the goal of being less noticeable to bystanders
For strength it’d probably be better to print in something that melts with ISO and fume smooth the outside which would not only make it more aerodynamic but would eliminate layer lines on the outside. It may even be beneficial to anneal the props then fume smooth after that.
Pro tip - been using 3D printed props for air and water (boat) with no issues for years by simply coating props with cyanoacrylate. No annealing required. Quick, fast, reliable.
If we picture the Zipline-prop as a single unit being used in a tractor configuration so that one of the two offset blades is first being forward, does it matter which is advanced and which is trailing? This may be a stupid question but, when geese fly in V formation the trailing bird must be above to catch the pressure wave from it's leading bird. I imagine the second blade of the prop should trail behind to catch the wave to amplify the thrust, but if it does will this alter the acoustics or the performance?
HI Cliff! May I suggest that you lengthen the blades and make them wider. This would increase the surface area of lift and would reduce the rpm required for take off.
Hey! I think you are correct with this. We started designing them a little on the “stubby” side to make them easier and stronger when 3d printing. Our follow up video will go this route though. Cheers! 🤘🏼
to ultimately create a silent toroidal propeller you must implement the owls wing in particular the wing tips /edge the owl is the most silent flyer
This is a really interesting point. I may have to try this. Thanks for the tip! We will mention you if we do 🤘🏼
Also apologies for the terrible pun “tip” 😅
If you were serious about wanting to make a mold I have a good friend who makes injection molds for a living. He can make a small mold called a mud mold with a cavity for the left hand right prop pretty easily
Might have to look into that. Molding parts definitely has its advantages. Thanks! 🤘🏼
PLA is in fact among the stro gest philament, its not tough, thats what you tought you had an issue with. As PLA has higher tensile strength, than PETG or ABS. However the issue was the isotropic quality of FDM prints (aka. weak along layer lines). If you. have issue with that i recommend high hardness grade TPU. If you cannot print it in proper orientation that is.
Yea, PLA is stronger, but not as flexible as the PETG. The start and stop of the props seems to be the majority of the stress and this is where flex is better. I thought about TPU but haven't found one that is hard enough to keep its shape at speed. Any recommendations?
Such a cool video! Is that chimera 7 used? It looks identical to the one i used to fly and then sold on fpv market place. Mainly because of the forward pushed gopro mount.
Hey! Thanks! Haha, yep that’s your old quad. It flies great with “real” props lol
@@CliffKajun ahh nice!! Im glad to see it doing some great work for you! 😀
Print the props with wax and then put them in a plaster of paris (PoP) or sand mold and then push in hot liquid plastic or metal. Ideally, Wax will burn off and you should get rough cut props which can be polished to an accurate shape.
try carbon fiber polycarbonate filament, really strong and easy to print with, just needs a hardened nozzle for the printer.
To massively improve the stabilety you could print them vericaly, cast them into plaster and then throw them into an oven to remelt the plastic inside of the plaster, make sure to keep it long and hot enougth to compleatly remelt the plastic
Awesome.
Over heated filament for better layer adhesion and printing slowly so it does not droop, and in a heated chamber so it does not warp. 25% speed.
I've printed quite a lot of props and found Tough PLA to be the best option, printed flat. Also, bigger (8" in my case) props work better as they rotate slower, reducing the centripetal force. Unfortunately, printed props always seem to be noisier and less efficient even if you work hard to sand & smooth the surface. While it's cheating a bit, my attempt at the zip-line prop used a pair of decent Carbon Fibre props with one blade cut off, stacked with the stem of the counterbalance sandwiched inbetween. You can buy hubs with a female thread - then use a long screw to hold it all together, along with some glue to fix the positions. For 8" diameter, I spaced the two bladed 10mm apart with a 30 degree angle between the blades. This seemed to give the lowest perceived noise level with decent efficiency. Even still, silent it was not.
Let's call them bunny props!
I printed props for a pylon racer that survived spinning up to 30k+ RPM. They were printed flat out of Polymax PC.
The point is to over size. Use low rpm high torque motors. Also the trailing blade has a 10-15% higher pitch than leading blade. The angle between the blades is based on the optimal rpm
Yea, we are going to try larger props on slower motors in the follow up video. Good call on the pitch! Thanks!
The angle between the blades is set, so at the pitch, turbulence noise is 180 degrees out of phase of the other blade. I found a tuning it was simple to record the sound at hover under load and tune by moving them apart, tell the sound from 1 blade, cancels out the sound of the other at that rpm, and load. I did all my testing on a bench with a load cell on an arm off the side of the table, swinging a T16x8 prop and modified by cutting 2 props dril holes in the CF and casting bismuth and trimming to balance each blade and the to as a set a modified tall hub let's me change the angle between them to tune to the 3500 rpm I ran them at for for efficiency. Power was a bench supply at 90v to a hv vesc a a set of umik2 from minidsp I use 1 at 5ft and 1 at 20ft to capture noise peeks and tune the props. It's no joke I managed to drop 19db doing this
did you hear me screaming while the first 2 tests with the pla/petg printed vertically? :D I mean, every 3d print user would know the problem. entertaining video! I vote for the design guidance video, have to learn still a lot in fusion360 :D
Lol, I knew it would be a little frustrating to the 3D printing crowd 🤣 Thank you! That video is up, but unlisted. We are going to makes some adjustments and re-upload. You can watch it here though: kzhead.info/sun/mJWLpKmwpKKkp6c/bejne.html
For injection molds, you can use a 3d printer. I made a carbon fiber back for my phone using a 3d printed mold although I need to warn you: it's finicky af. The whole process took around 5 days(would have been 2 if the weather wasn't crap). That said, there are some extra steps in order to get a clean result without inheriting the imperfections from a 3d print. Perhaps I should make a video explaining it...
Speaking of, I could hypothetically make the props out of carbon fiber and ship them over to you...
Good to know! I appreciate the advice, we are seriously considering making a follow up with molded, resin printed, and a few other methods. Also an updated design since the limitations of 3d prints won’t be an issue for all. If you make the video and explain how to do the mold, I’ll watch it and shout you out in our video instead of trying to explain it myself. (Assuming we make it. I’m 95% sure we will). I appreciate the shipping offer, but I would rather just keep tinkering and building. It’s likely they’ll get destroyed by me immediately anyway lol. If you make the video, comment on here and email it to the email on our about section. Cheers! Cliff
The offest seems to be the key, have you tried 3 offest props? I would also space them out so they are not evenly spaced to lower the resonant frequency.
I have not, but this is an interesting idea. I'll look into it. Thanks!
For better sheer strength, consider metal reinforcement. Extra light aluminum strip just inside the outer rim of the blade, creating a tension pulling inwards along the whole prop. Cheap, light, solid, reusable. Its the method I do for anything that needs to hold any sort of weight, because 3d prints are notorious with sheer because of the layering
Also, I wonder about the circle arc supportless 3d printing system. If you adjusted the arcs along the shape of the prop, you might be able to dramatically improve the whole print and get rid of the supports entirely in a single upgrade
Can you try offsetting the outersurface of the prop by about 0.3mm and then fiber glass? Use carbon or glass toe around the hub. The aerodynamic centre of the zipline prop force is not centred on the hub which causes vibrations and twisting of drone arms. I would be interested in finding out what happens with a similar three blade prop with the props at 95.5, 124.9, and 139.6 degrees (these are prime ratios which I think will spread out the frequency of excitation. You get fewer repeating patterns with prime numbers with the rotation of the blades if that make sense. If you know what a response spectrum is, it flattens out the response spectrum). Each prop can be a different size so the aerodynamic centre of force is at the hub which also reduces vibration. Stag the heights of the props for clean air. I am really curious to see what the result would be.
That could work! I'll add this to the list of test versions for the follow up video. Interesting. I'll take your notes and do some more digging to get a better understanding of the science before our next design. Thank you for the details!! 🤘🏼
@@CliffKajun Really looking forward to seeing results. Thanks for the work you put into this. It is pretty interesting.
polymaker polymax PLA printed at about 235 is very tough. I use it in combat robotics
Robinson Foundry has great videos on casting parts using 3D printed parts. Aluminum props would be interesting. And dangerous AF. xD
I hear ASA filament is pretty tough and good for UV resistance too.
That was my thought. You can also acetone smooth them which would make the props super smooth and bind the layers together better. I do this all the time on my models (not props yet).
I think you should use SLA 3d printing technology. 3D printing with this solution will make your part have a texture similar to molded plastic.
That's a great idea, and I think we are going to do a follow up video with resin printed versions. The higher end SLA prints aren't something we can currently afford since we would need several variations. Cheers 🤘🏼
it would be cool to see a weighted single toroidal prop, would it have less turbulence from the blade wingtips wrapping around instead of being separate? maybe stronger than the ziplines?
We are thinking the same thing haha. These will be tested in the follow up video, and imagine they will be much stronger. Thanks! 🤘🏼
Carbon fiber won't help but i'd give a shot to nylon if you are able to print some. It's a pain in the ass to print but the X1 is more than capable to do so. No part cooling and the right temperature should make those very solid and the flex will prevent them from "exploding".
I have some nylon on the way. Thank you for the detailed tips!
I've been thinking about how to make them stronger while keeping the shape nice. Maybe your could try printing it single wall and filling it with epoxy. You could add chopped carbon of fiberglass to make it stronger. Alternatively you could try salt curing these props, where you put them in a bed of very fine compressed salt. You then put it in the oven to fully melt it together. CNC kitchen has a great video on it. Lastly, I'm really curious about how the second prop is affected by the downwash of the first one. So it'd be really cool if you got high framerate footage of the next version running with some smoke. You might actually want to print a test stand with a single motor so you don't have to mount them on your drone every time. They are often L shaped with a bearing in the center and the other arm pressing on a scale to get force measurements.
That’s a great idea on filling the hollow print instead of infill. I’ll have to try that. Salt curing is on our radar for the follow up for sure. I’ll watch the video. Thanks! We are going to make a much better test rig for this one and tweak the design of the props quite a bit.
@@CliffKajun cool! Looking forward to it!
I wonder if this may be a good use case for resin. You wouldnt have the issue with layer delamination since resin prints are pretty uniform regardless of print orientation. Resin is not shock resistant but is pretty strong in tension. You would also get more accuracy in general. Though definitely not a permanent prop solution
I agree, resin is probably the best option for working prototypes. We are getting ready to test and start the next video very soon!
@@CliffKajun awesome I look forward to watching it!
The obvious solution is to use SLA resin 3D printing. You can get much better stiffness vs flex properties with resins like Siraya Tech Blu etc. Secondly... if you want to knock out batches and batches of these things, you really ought to get into simple mold and casting techniques. This is where 3D printing obviously shines, especially resin printing. Due to the smooth, almost non-existent layer lines. Casting is super easy, and not expensive at all, using Smooth-On products. Plus, there's awesome casting resins that harden in minutes. With a silicone mould in your drone kits, you could literally make new props in the field and be back flying well under an hour.
Nice excision lost lands shirt!! Lmk if you will be going this year
Haha thanks🤘🏼 I should be stage front flying fpv for the live stream again 😎
I would love a video on how to make propellers in fusion 360!
Awesome! We will make the video next week 🤘🏼
Cool video! They look like Playboy bunny ears. Should make them in pink.
Thanks! Haha, I really missed an opportunity there 🤣
@CliffKajun maybe for a future attempt, try printing them from ABS & then Acetone vapour smoothing them. Or try resin printing them
You spend a little more and try Taulmans 910 alloy CF nylon! It was great layer adhesion and amazing strength!
I would use HDPE filament and inverse 3d print it as a reusable pressure mold for forged carbon. It’s cheap, simple, lightweight and durable.
If you want to quickly strengthen a PLA print, you can brush it with runny superglue, then spritz it with hardening accelerant, and the glue will go into the voids and pores, and your prints will be instantly far stronger. I learned this trick from the KZhead channel of Robert Murray Smith, the maker/engineer dude.
What is the puff of vapour on your right at 9.49?
Might have to try resin on em
I keep wondering if bigger, slower props will be quieter. More surface area for lift means props can spin slower, right?
You're exactly right. Bigger propellers are also more efficient and run on lower rpms. The limiting factor is the frame size of your drone. There's a give and take as increasing the frame size increases the forces it needs to withstand and increases weight from the compensating material.
You might want to take advantage of non-planar 3d printing, which can help you print the propellers without most layer lines. I believe teaching tech made a video on this.
Thanks for the tip! I'll check it out!
get a resin printer, though they are a bit more hassle they blew my mind when it came to quality and print time. specially when you're doing a batch of them for testing, since adding more parts doesn't add more time. awesome vid!
We are getting one this week! Lol. That’s awesome to hear. Thanks! 🤘🏼
If you would had just printed them out flat the first time and then just taken the hour it takes to sand them smooth they would have worked perfectly fine. I have 3d printed several propellers before and have gotten each of them perfectly smooth in about an hour of sanding. My guess is with all of the failed attempts and tried if you would have done it the right way from the very start it actually would have saved you a ton of time. Still though, very cool video! I enjoyed it a lot while eating a bag of chips
thanks for posting the stl. now the horror can end.
😅
Pla is harder, you can try duramic pla+, it’s a pla blend that is incredibley durable with really good layer adhesion at higher tempretures as well
That is true. I'll check out that brand and type. Thank you for the advice! 🤘
well u can build a injection molding press yourself for quite cheap, i would love to see you make props with a DIY press :D
I think we are going to do this very soon 😎
Um. Try using a loss style creation, where you anneal a chunky version and CNC it down, if you want it to acutally be smoothe. Make the blanks for your props out of material in multiple steps, and stick something like a bit of fiber material into it, infill it with anything that will bond with both, and you'll have a structural element. Print in two steps where the second sticks to the first, if you want a semi rapid way to turn your prop into more or less a string with soild structure around it, to turn the problem into a tension one on the fibers, rather than a solid mass+resonance structural problem involving complex forces acting on a otherwise solid shape?
I got a toroidal prop to spin up w/o breaking...but not fast enough to lift a drone - wondering if the "continuous connected" material makes them stronger? This is just for fun though...I don't think the novelties are ready for prime time. Also, many people smarter than us have worked on "quiet" props...aaaannnd...we still got regular ol props in the main stream. That's my "CLUE."🤣
Haha, yea it’s definitely more about the journey than the result. It’s been a blast🔥 (pun intended) 😅 Toroidal props seem to be stronger since they are connected from our tests.
It's great you are showing your progress. What temp where you using?
I have printed props, it has to be hot no fan each layer melts together.
Also the pattern it's prints is important, 100 percent infill move around on plate till z seam is diminished or in exceptable location, also fine layer lines on each layer.
Also shape is odd, might not be balanced equally on all directions, possible reason for self destruction.
Good call on running a higher temp, I’m doing that on our next set. 🤘🏼 Balance was close in all directions. The wide counterweight allows for adjustments both ways. It wasn’t as perfect as I would have our cinelifter props though. Thanks for the tips!!
Another thought that came to mind it was hard for me to explain, even though weight is balance on balance tool all the way around, the angle of attack or incidents to hub ,ounce lift starts acting on blade at different speeds unequal forces are applied to attach point on spinning hub. Like the flex in say top blade angle changes and forces the blade to go in unrealistic angle of attack and tear itself apart. High speed camera with smoke might tell u more of forces acting on blades. Also test subjects I would be curious on how brittle vs toughness, or flexibility. Just trying to be constructive not over critical. Thanks for all your hard work!
Hi, please try using E-DA brand TPU, it is a bit stiffer then other TPUs, I use it in a bowden tube printer, I think it would work well for this.
(very high layer adhesion, will bend instead of snapping, nylon-like but easy to print)