3D Printed Mouse🤯

2023 ж. 4 Қар.
8 905 610 Рет қаралды

  • pc people when they find out their mouse is prebuilt:

    @LilRickyYT@LilRickyYTАй бұрын
    • Still prebuilt pcb board!

      @309electronics5@309electronics5Ай бұрын
    • ​@@309electronics5and a gpu is prebuilt from the factory, tf is ur point?

      @MrToastyYT@MrToastyYT29 күн бұрын
    • ​@@MrToastyYThahahahahahahaha

      @rafindairham1808@rafindairham180829 күн бұрын
    • ​@@MrToastyYTPc people realizing that custom gpu they made themselves contains prebuilt atoms:

      @darkduckpl9620@darkduckpl962029 күн бұрын
  • 3D print enthusiasts realizing their heart isn't 3D printed:

    @9767Music@9767Music24 күн бұрын
    • YET (context, they are 3d printing organs, even if it's not yet ready for medical use)

      @jani25654@jani2565422 күн бұрын
    • @@jani25654 oh thats true i forgot about that

      @9767Music@9767Music22 күн бұрын
    • From the moment I understood the weakness of my flesh, it disgusted me.

      @brainshell2933@brainshell29338 күн бұрын
    • @@9767Music😂😂😂 the more we know

      @agentkaabi9967@agentkaabi99676 күн бұрын
  • Jokes aside, that mouse looks really cool!

    @PranavVijesh@PranavVijesh21 күн бұрын
    • It's just a worse version of a Logitech G502

      @vl3244@vl324414 күн бұрын
    • mid at best

      @bran_rx@bran_rx4 күн бұрын
    • Ya and probably feels awful.

      @daegan3505@daegan3505Күн бұрын
  • How to 3d print a mouse: Step 1: buy a mouse

    @Certifier@Certifier28 күн бұрын
    • No Its only the pcb

      @sh4d-w@sh4d-w26 күн бұрын
    • Lol what of course you can't just print the internals

      @RealShaggy@RealShaggy26 күн бұрын
    • Step 1: buy a shitty mouse Step 2: 3d print case and assemble And then you have a normal mouse

      @somethingbutnot7217@somethingbutnot721726 күн бұрын
  • 3d printed mouse: 😊 3d printed maus: 💀

    @retr0892@retr089226 күн бұрын
    • average war thunder player trauma

      @ilyasberrad1951@ilyasberrad195124 күн бұрын
    • I think its a World of tanks trauma😅😂😂

      @jeanvaljean2718@jeanvaljean271824 күн бұрын
    • I want my 3d printed medicinal nuclear powered aircraft carrier

      @literallyhuman5990@literallyhuman599023 күн бұрын
    • mouse on gremany is maus

      @noobmakbekens@noobmakbekens21 күн бұрын
    • 3d printed mauser

      @user-up8jn9gs7g@user-up8jn9gs7g19 күн бұрын
  • That mouse’s design is so cool bro

    @jack7-qx3oe@jack7-qx3oe27 күн бұрын
  • Too bad it doesn't actually have a mouse click to it, looks awesome otherwise

    @guichabanaano27@guichabanaano27Ай бұрын
    • Thank you 🙂

      @davidlikestoprint@davidlikestoprintАй бұрын
    • If you have those lever switches that home your 3d printer, they're similar to the ones in Logitech mice and have a satisfying click.

      @thenerdlog1602@thenerdlog160229 күн бұрын
    • Doesn’t it function like a normal mouse?

      @brilspolymathstudios@brilspolymathstudios27 күн бұрын
    • Follow Jesus Christ and he will transform your life.Follow JIesus Christ and he will transform your life.Follow JIesus Christ and your heart will never be empty again.

      @enriqueamaya3883@enriqueamaya388327 күн бұрын
  • Nah bro just invented China home edition

    @mrutia8733@mrutia873326 күн бұрын
  • Uhm... you forgot to install superglides

    @sussyboi1248@sussyboi124813 күн бұрын
  • That looks so cool!

    @user-rh4km4eu8c@user-rh4km4eu8cАй бұрын
  • Using a glow in the dark resin + adding a led light will make this more awesome. ✨🤜

    @ASMReverything28@ASMReverything2825 күн бұрын
  • 60% support 40% mouse

    @louadrichem9751@louadrichem975125 күн бұрын
    • You know anything about printing? Those support are hollow and probably like 5 or 10% support.

      @pacboygamer6728@pacboygamer672817 күн бұрын
    • Not to mention that it'll look 💩 without enough support

      @Laur7@Laur714 күн бұрын
  • What a beautiful quality of print ngl

    @chvtney@chvtneyАй бұрын
    • Follow JIesus Christ and he will transform your life.Follow Jesus Christ and he will transform your life.Follow Jesus Christ and your heart will never be empty again.

      @enriqueamaya3883@enriqueamaya388327 күн бұрын
    • @@enriqueamaya3883bro 💀

      @-XenoCide15-@-XenoCide15-25 күн бұрын
    • ​@-XenoCide15- jesus Christ is a 3d printer engineer now and he is the head developer of this printer bro

      @felipeh5510@felipeh551024 күн бұрын
  • most people have a company they like (Logitech etc) but everyone has a different grip pref. clever peeps like this fella would earn good money by sending some sort of mould material for people to have custome grip shells created :)

    @dreddythomas3514@dreddythomas3514Күн бұрын
  • Looks sick. Good work man👍🏻🤘🏻

    @MilesTeg_cy@MilesTeg_cy24 күн бұрын
  • Too cool!

    @foodstamps6867@foodstamps6867Ай бұрын
    • Yes I agree 💯

      @davidlikestoprint@davidlikestoprintАй бұрын
  • That was incredibly satisfying and great looking mouse

    @TG-Maverick22@TG-Maverick2215 күн бұрын
  • Bro would you please tell me at what speed you are printing? Thanks, yours looks really good

    @conradogil6905@conradogil69055 күн бұрын
  • vote for 3d printed keyboard 👇

    @shuvobiswas1839@shuvobiswas183928 күн бұрын
    • 3D printed keyboard next? 👀

      @davidlikestoprint@davidlikestoprint28 күн бұрын
    • @@davidlikestoprint yes please~

      @MJ-kun17@MJ-kun1727 күн бұрын
    • ​@@davidlikestoprintyesss

      @theskylegend303@theskylegend30326 күн бұрын
    • 3d printed monitor later

      @oneedicin4605@oneedicin460526 күн бұрын
    • Yesss

      @Goon57@Goon5725 күн бұрын
  • The 3D print is really neat!

    @A.Willdan@A.Willdan26 күн бұрын
  • Nice, so we can decide on what color and material to print with!

    @amaljoe367@amaljoe36721 күн бұрын
  • Welldone if you wanted to 3d print mouse and assemble it why don't you go with rechargable battery option!

    @hardikpanchani3528@hardikpanchani3528Ай бұрын
    • That’s just what came with this! I plan to add glass skates and a rechargeable battery!🙂

      @davidlikestoprint@davidlikestoprintАй бұрын
    • This is a kit from bambu, pretty sure adding a rechargeable battery would be pretty trivial though

      @Epsicronics@Epsicronics26 күн бұрын
    • Facts rechargeable battery option

      @rubenbowen5850@rubenbowen585021 күн бұрын
  • So satisfying to use what was printed. Well done

    @ratheonhudson3311@ratheonhudson33117 күн бұрын
  • Give this man an award for coolest looking mouse ever.

    @galaxy.nation@galaxy.nation21 күн бұрын
  • What setting do you print on man your stiff comes out clean i have to out mine on silent mode to get quality like that lol

    @cozwald315@cozwald315Ай бұрын
    • I printed this on the standard speeds at the stock settings

      @davidlikestoprint@davidlikestoprintАй бұрын
    • What material are you using?

      @janwucherer3628@janwucherer362827 күн бұрын
    • @@davidlikestoprint What filament and print nozzle did you use? My stock settings on a P1S don't look anything like the upper shell here. I can't see layer lines or any of the expected artifacts on the top of your print.

      @RyanSherwood1@RyanSherwood1Күн бұрын
  • Great print and great video ! Keep it up bro ! 💪

    @Laur7@Laur714 күн бұрын
  • the looks of the mouse looks awesome 👌

    @khriesilhourio6490@khriesilhourio649027 күн бұрын
  • Very very nice.. I love the colors

    @TheFunnyPlayer2@TheFunnyPlayer221 күн бұрын
    • Thank you so much 😊

      @davidlikestoprint@davidlikestoprint21 күн бұрын
  • This actually good ... imagine building your custom mouse that can perfectly fits your hand palm

    @ElectroWolf_Arts@ElectroWolf_Arts22 күн бұрын
  • what plastic did u use bro? Looks clean

    @lildeep.@lildeep.28 күн бұрын
    • Pla +

      @davidlikestoprint@davidlikestoprint28 күн бұрын
    • @@davidlikestoprint petg might have been better... Pla+ may start to crumble over time.

      @AdamWood@AdamWood21 күн бұрын
  • That's gotta be the most organized mouse Sodder board layout that I have ever seen

    @Gerisk@Gerisk3 күн бұрын
  • What screwdriver is that? It looks so nice to use

    @JackthanGames@JackthanGames10 күн бұрын
  • Is it strong enough to withstand exactly 30 hits against a wall

    @FlimTheIdiot@FlimTheIdiotАй бұрын
  • Nice ASMR video! ❤

    @what_the_heyp6173@what_the_heyp617315 күн бұрын
  • This is so cool!

    @KdawgThegreat@KdawgThegreat22 күн бұрын
  • Thats honestly a really good idea. That way you can get a mouse perfectly fit for your hand

    @CryBlade@CryBlade24 күн бұрын
  • bro you should be printing a travel mouse cause that desk space situation is abysmal

    @z1mpL@z1mpL11 күн бұрын
  • I’m more impressed with the print quality

    @yunotazombie@yunotazombie7 күн бұрын
  • This actually very good anyone can design there own grip and textures fully customisable. Man you can start a company.😊

    @gangeshgoyal8902@gangeshgoyal890228 күн бұрын
    • It's kit that you receive when you buy bambu lab A1. Everything is prepared you just print and assemble.

      @FevonTV@FevonTV26 күн бұрын
  • Dope video bro

    @warriorjennings2733@warriorjennings273316 күн бұрын
  • That mouse works better than my mouse

    @nikolairov7554@nikolairov755414 күн бұрын
  • What printer are you using?

    @Hook0403@Hook040323 күн бұрын
    • looks like a bambu lab A1 mini

      @stefanpatriche-vv7mb@stefanpatriche-vv7mb6 күн бұрын
  • Damn that actually looks good

    @D_0_X_X_Y@D_0_X_X_Y20 күн бұрын
  • I’d buy this.

    @sevenfacedsin@sevenfacedsin15 күн бұрын
  • I will never understand why people print something that doesn't need support, with support.

    @Duck_side@Duck_sideАй бұрын
    • Well these are one of the kits with the new bamboo and I think it's already sliced

      @bigspacepenguin5135@bigspacepenguin5135Ай бұрын
    • It definately needed support

      @Youngjackj@YoungjackjАй бұрын
    • @@Youngjackj I've printed more complex parts than that with zero support. Theres even a guy here on KZhead who does zero support 90° printing. Support material is wasteful, all you need is better management of your slicing software.

      @Duck_side@Duck_sideАй бұрын
    • @@Duck_side and that compromises the finish, this is for a mouse. Part kd the design process is considering where its going to be used

      @Youngjackj@Youngjackj28 күн бұрын
    • Because, the people want just "Print & Go" and BambuLab is particularly suitable for this. But hey, better than back then where many went with PVA, which is expensive support material. How to do to print smooth without support, requires a bit knownledge and experience.

      @stanisk.942@stanisk.94228 күн бұрын
  • Imagine printing your own mouse lol Btw It looks really cool!

    @Dhyotte@Dhyotte26 күн бұрын
  • Please teach us how to use it. And what printer should we buy to make some thing amazing like you did with your mouse. Including the size shape which exactly got fit in it😮

    @sheharyarahmed8202@sheharyarahmed820213 күн бұрын
  • What the hell was the point if you were just going to scalp a store-bought Mouse for parts?

    @MagusKain@MagusKain23 күн бұрын
    • building a shell that you actually like?

      @rookm13@rookm1322 күн бұрын
    • it's a diy kit you can buy, he did not scalp anything

      @hulkaplex@hulkaplex20 күн бұрын
    • this child still think we can make mouse chip at home

      @mira8950@mira895020 күн бұрын
    • @@mira8950Why are you writing in third person?

      @MagusKain@MagusKain20 күн бұрын
    • maybe he likes building stuff? what is ur point lol

      @memehamsterr@memehamsterr19 күн бұрын
  • Потрясающая идея 🔥🔥🔥 оооч круто

    @Killer-ze7qp@Killer-ze7qp21 күн бұрын
  • Please how did you create these supports? and what brand of filaments do you use for the black color?

    @jeanindustriel7178@jeanindustriel71788 күн бұрын
  • How cheap does it feel?

    @versuh4414@versuh441423 күн бұрын
    • It's depend on what you put inside. It can be insides from cheap China mouse or you can buy good parts. Also with skills 3d model can look like art. Seems you can use also expensive UF 3d printer.

      @art4elover718@art4elover71817 күн бұрын
    • I’ll bet it feels cheap, but some captive weights in the 3D printed design could help with making it feel more premium.

      @Onio_Saiyan@Onio_Saiyan17 күн бұрын
    • I mean it’s a mouse that needs a battery it’s cheap asf lol

      @slightkek9511@slightkek951113 күн бұрын
    • definitely cheap af

      @bran_rx@bran_rx4 күн бұрын
  • Ngl that'd be hella useful for me. I hate changing mice cause of the different shapes but the MX pro (what this is modeled after) is too heavy for gaming

    @DrTwink@DrTwink21 күн бұрын
  • Watching him put it together its oddly relaxing

    @larryarnold7515@larryarnold751519 күн бұрын
  • That's really cool! Is there any stl file?

    @proxima2739@proxima27399 күн бұрын
  • Surely you can make one that's like hella amazing for butterfly clicking

    @Zebra_Paw@Zebra_Paw2 күн бұрын
  • I Like It, I love the feature where you can swap out the battery really easy, Good Job 👍 and those of you who say rechargeable batteries are better, I agree with you, but did y'all know they make rechargeable AA and AAA batteries too? those are way better then those hard to replace rechargeable flat batteries.

    @jimbolove5669@jimbolove56699 күн бұрын
  • now all I can think about is a scan of a hand used to make the perfect ergonomics for each individual.

    @ZSmith-yy4lv@ZSmith-yy4lv15 күн бұрын
  • Looks better than magic mouse

    @tusharbhanot8618@tusharbhanot861810 күн бұрын
  • bro abouta make a whole 3d printed pc

    @ThaRizzah@ThaRizzah13 күн бұрын
  • In a resin printer it would probably look astonishing

    @AFV1891@AFV189110 күн бұрын
  • That's really cool how did it take the printer

    @randomhistorian2417@randomhistorian241725 күн бұрын
  • Nice build

    @ferguesoncolin4144@ferguesoncolin414415 күн бұрын
  • Is this like a different kind of pla or something that your using? Your supports come off so easily and smoothly, unlike mine which are a nightmare to get off. I wonder what you use that makes these very nice and easily removable supports.

    @MightyMonster90@MightyMonster9016 күн бұрын
  • Крутая получилась!

    @user-pl4im5rw8n@user-pl4im5rw8n20 күн бұрын
  • Make one with a track ball for the nostalgia

    @dallas-cole@dallas-cole12 күн бұрын
  • The print quality is amazing

    @Nobody-bp8cs@Nobody-bp8cs21 күн бұрын
  • Spent twice as much material on the supports as you did the actual shell.

    @Gatlinggunman@Gatlinggunman14 күн бұрын
  • Hear me out, decent sensor, decent click buttons, decent cable anti-ms(delay), and the razer ceramic glides

    @TotallyNotKanye@TotallyNotKanye15 күн бұрын
  • Is there a controller version of this And can you easily swap the shape

    @brunoob1557@brunoob15575 күн бұрын
  • Thats awesome

    @SomethingX13@SomethingX1314 күн бұрын
  • This reminds me of the "Thinking quickly, Dave constructs a homemade megaphone using only some rope a squirrel and a megaphone" meme

    @JoJam95@JoJam9515 күн бұрын
  • Dam that printer is dialed in perfectly

    @maxchapman3736@maxchapman373619 күн бұрын
  • Now add a tungsten cube inside. Bring back heavy mice.

    @DirtyGingy@DirtyGingy24 күн бұрын
  • Actually looks nice

    @nateh2665@nateh266524 күн бұрын
  • The black one looks like you’re taking apart something from Banes mask with the “piping”

    @josiahstearns9615@josiahstearns961521 күн бұрын
  • What 3d printer do you have? The surface is quite smooth.

    @MrMirkoi@MrMirkoi22 күн бұрын
  • Can we have a design tutorial

    @tres-4b798@tres-4b79815 күн бұрын
  • I like that design

    @mewtu5817@mewtu58173 күн бұрын
  • Id love to do that if i had a printer. Could finally design the exact size lf mouse for my hand to game

    @jamestuc80@jamestuc8021 күн бұрын
  • Still better build quality than steelseries

    @clintstevens8633@clintstevens863315 күн бұрын
  • Cool mouse! What material did you use?

    @MOONARCH420@MOONARCH42026 күн бұрын
  • How much did that cost?

    @Goessel@Goessel4 күн бұрын
  • "You wouldn’t download a mouse, would you?"

    @ajhess8308@ajhess830813 күн бұрын
  • Can you make one where you add side buttons

    @zazaman9991@zazaman999114 күн бұрын
  • Yo i'm speechless It's off to you great design.

    @Old-soul91@Old-soul9125 күн бұрын
  • Bambu Labs has made it to damn easy! Some of you will jever understand the frustration of building your own Reprap, or even setting up an Ender. That X1 is an absolute game changer.

    @rallywagon261@rallywagon26110 күн бұрын
  • I love how it doesn't even click, he has to bump it to even get it to respond LOL

    @PTIPPY@PTIPPY19 күн бұрын
  • I would have designed a dongle holder outside the battery place but cool mouse

    @theGamerzx3@theGamerzx323 күн бұрын
  • But that bottom even with the feet probably scratches all mouse pads/matts

    @joshuastannard4055@joshuastannard405513 күн бұрын
  • I'm going to save a fortune and 3d build my own mice, I will only have to buy a mouse every time I want to print one.

    @adamford3436@adamford343621 күн бұрын
  • Ohh that’s sickkk

    @iantwebaze1043@iantwebaze104310 күн бұрын
  • How on earth are these prints so smooth coming off the build plate?? Is it just a tiny nozzle and like .1 layer height?

    @DesignerOfManyThings@DesignerOfManyThings23 күн бұрын
  • Hmmm, could also turn a mouse into a left-handed one for way less than the stupid mark-ups we normally get charged

    @StevenSpillerUK@StevenSpillerUK10 күн бұрын
  • Still higher quality than a school mouse

    @Sakourio@Sakourio9 күн бұрын
  • I really like that 😊. Question though. What screwdriver is that you are using?

    @wayne361@wayne36111 күн бұрын
  • What screwdriver are you using?

    @josiahmorgan3138@josiahmorgan31387 күн бұрын
  • Economic and cool 😎👌

    @Sparky_456@Sparky_45619 күн бұрын
  • How do your trees come off so easy???? Mine are a nightmare to pull off sometimes

    @Gomeyy@Gomeyy11 күн бұрын
  • Year 2060: 3D printed house

    @Anoqxra@Anoqxra15 күн бұрын
  • Does this even count as building it? Basically a parts kit like lego set. Would actually be impressive if he made the board

    @DrMike69@DrMike6916 күн бұрын