KZhead
Тәжірибелік нұсқаулар және стиль

Heavy Duty Rotary Hammer Restoration | Hilti TE504 Hammer Year 1998

Gear Show
2019 ж. 7 Қаз.
3 006 384 Рет қаралды
Жүктеу

Rotary Hummer Restoration Video
I found it in a dilapidated state. It has soil inside, likely to soak in the mud.
I got it for free from the seller, but It takes me a lot of time to restore it. Finally, I am really happy that it works after I put all parts back together. At the end of the video, you will see I test this tool.
I hope you find something useful & enjoy the video!
I am happy to receive your feedback, advice, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
**I still keep some parts, I want to save the world's environment**
--------------Thank you so much for Likes & Comments--------------

Пікірлер

  • I worked at Hiltis repair center many years ago. I have repaired hundreds, if not thousands of 504’s. Even if it’s many years ago, i still remember every small o-ring, spring, bearing and retaining rings, and what goes where. I even remember the smell of the old grease and oil 😁 Great job restoring an old classic 👍

    @MrNajholt@MrNajholt4 жыл бұрын

    • Глщшлщщ

      @user-fj9oy3jp1x@user-fj9oy3jp1x10 ай бұрын

  • I've done this to a few old tools at work that were ready for the bins. Just like you, I do it for fun and to see old things brought to life again with a little care and attention. The guys at work seem to think what I'm doing is pointless, but there are enough tools in the world and not enough people around to care for them.

    @classydays43@classydays43 Жыл бұрын

  • Whoever made this tool is a genius

    @chengcheng422@chengcheng422 Жыл бұрын

  • Hilti the best power tools

    @joegroves4695@joegroves46954 жыл бұрын

  • I am working with that tool since I was a kid. My father bought it when we started renewing our home inside, outside, the garden,... and we even used it for digging holes in the ground. We were so proud of it. "Get the Hilti!" :) (Later it got a little wired when we also got a TE5 which we then called the "Hilti for drilling".) Now I am working on my own bought house. Finally (just before I finished breaking a wall) it stopped hammering. Finally? I hooe not and thanks to this excellent and more or less slow enough video I believe I am able to get it into pieces, cleaned and hoepefully identify whats wrong. I am probably going to spend some time and money to get it working again. Hoping for many more years of hammering with this tool. Thanks for this video, it's giving me hope and helping me. Also found a drawing on the Internets, showing the parts for assembly.

    @carlwummel9050@carlwummel90502 жыл бұрын

  • Nice to see an old lady in good shape again. GJ

    @Pijus67@Pijus674 жыл бұрын

  • Hilti Rotary hammers are the best in my opinion.

    @Metzger23@Metzger234 жыл бұрын

  • Very professional work

    @fethiagrico@fethiagrico4 жыл бұрын

  • A+ for not having any of the hundreds of parts and hardware leftover! Great job.

    @stephaniesander5465@stephaniesander54654 жыл бұрын

    • Thank you!

      @gear_show@gear_show4 жыл бұрын

  • WOW!!! - I was Amazed at just how many components were inside this thing!!!!

    @allankleidon6437@allankleidon64374 жыл бұрын

  • Hypnotic video, my type of meditation. Thanks a lot for filming and putting it all together.

    @kirillgreek8653@kirillgreek86534 жыл бұрын

  • You are always creative from Saudi Arabia🇸🇦👍🏻

    @Abo_Zead@Abo_Zead4 жыл бұрын

  • Another great restoration ,Hilti do make quality tools that last for decades , i have a TE18 that is all metal cased and still works as good as when it was new 45 years old now.....!

    @yensabi@yensabi4 жыл бұрын

  • Ang tindi mo brod pinahanga mo ako sa restoration mo ng hilti hammer drill natandaan mo iyong pagbabalik alam na alam mo professional ang dating at ang gusto ko kumpleto ka sa tools at ang cameramo talagang nasa gingawa mo more power

    @qawsedrftgyqawswdrftg4822@qawsedrftgyqawswdrftg48224 жыл бұрын

  • 21 year old rotary hummer... That actually sounds like it would be amazing to see.

    @getyourkicksagain@getyourkicksagain4 жыл бұрын

    • An H1 with an RX7 engine swap

      @FuglyFatt@FuglyFatt4 жыл бұрын

    • Lol, with a Mazda rotary engine

      @mrpanda2655@mrpanda26554 жыл бұрын

    • I've got an old Hilti TE17. Not sure when it was made but it was their first model that came out in 1967. It still works great.

      @Rickmakes@Rickmakes4 жыл бұрын

    • getyourkicksagain Hummer with a 20B

      @devinhaisma@devinhaisma4 жыл бұрын

  • Very good Mr. Hands

    @MrArtVendelay@MrArtVendelay4 жыл бұрын

  • One of the best tools I hav ever used.Bravo for saving this one.

    @nikolaosstavrou5327@nikolaosstavrou53274 жыл бұрын

  • Well done 👍

    @danr7777@danr77773 жыл бұрын

  • Très bon travail bravo

    @mustaphaettiani2218@mustaphaettiani22182 ай бұрын

  • Quien es este GENIOO.....APLAUSOSS...AL CABALLERO RESTAURADOR

    @carlospacheco4374@carlospacheco43743 жыл бұрын

  • very impressive......I would love to learn this. A great gift God has given you!

    @soldoutforchrist-andy1232@soldoutforchrist-andy12323 жыл бұрын

  • i like that you use restored tools from previous videos to do the job

    @langestack5241@langestack52414 жыл бұрын

    • Oh, thank you!

      @gear_show@gear_show4 жыл бұрын

  • You are another version of Bob Ross to me. It's amazing to watch. I am just surprised you know how to take all those tools apart - and that you manage to put them together afterwards. Love it.

    @tcurdt@tcurdt4 жыл бұрын

    • I am so glad, thank you!

      @gear_show@gear_show4 жыл бұрын

  • They don’t make them this good anymore! great job

    @brainache555@brainache5554 жыл бұрын

    • Thank you!

      @gear_show@gear_show4 жыл бұрын

  • A beautiful tool and still every bit as functional today as it was back when!

    @farmerbob4554@farmerbob45544 жыл бұрын

  • Clever clever man, I watch all your videos, much better than the TV.

    @geoffreykitson532@geoffreykitson5324 жыл бұрын

    • I am so glad to hear that, thank you so much!

      @gear_show@gear_show4 жыл бұрын

  • Τέλεια η επισκευή του κομπρεσέρ και τώρα σπάει καλύτερα από πριν .

    @mpalaskokkalis1476@mpalaskokkalis14764 жыл бұрын

  • This man has some patients

    @muddingblogs457@muddingblogs4573 жыл бұрын

  • I worked on many of these! Brings back memories! I worked in Hilti’s tool repair department from 1983-1998. I lot of their tools required special jigs to disassemble and reassemble. Now there are battery powered breakers that have more power than the TE504.

    @glenngilbert4593@glenngilbert45934 жыл бұрын

    • You know this tool very well, thank you for sharing.

      @gear_show@gear_show4 жыл бұрын

  • просто супер.дать жизнь вторую такому перфоратору нужно иметь золотые руки.респект🤩👍👍👍

    @hammerfist6937@hammerfist69374 жыл бұрын

    • Thank you!

      @gear_show@gear_show4 жыл бұрын

    • @@gear_show не за что.реально красиво сделал.уважаю.

      @hammerfist6937@hammerfist69374 жыл бұрын

  • Whenever I watch your videos, I always feel like I’ve accomplished so much. Damn I’m good.

    @tomalcolm@tomalcolm4 жыл бұрын

    • I am glad to hear that.

      @gear_show@gear_show4 жыл бұрын

    • N Yyuy

      @daoudennaji3516@daoudennaji35163 жыл бұрын

    • @@daoudennaji3516 د٠ .. . ،

      @amjadking3573@amjadking35732 жыл бұрын

  • What was probably assigned to the scrap pile is now a perfectly good tool thanks to your skill and know how. Great video 👍

    @derekwilkinson7939@derekwilkinson79394 жыл бұрын

    • You're welcome, thank you!

      @gear_show@gear_show4 жыл бұрын

  • Very good restoration 👍👍👍Thanks for sharing

    @yeagerxp@yeagerxp4 жыл бұрын

    • You're welcome, thank you!

      @gear_show@gear_show4 жыл бұрын

  • Great hummer... I have use it for many jobs

    @fafa9493@fafa94933 жыл бұрын

  • Emeğine sağlık kardeşim.guzel çalışma

    @ozcansezer1950@ozcansezer19502 жыл бұрын

  • Muy buena la restauración para evitar tirarlo quedo como nuevo y un maestro para armarlo. Saludos desde Argentina

    @guiwal4584@guiwal45844 жыл бұрын

  • Witam i pozdrawiam!Super wykonana renowacja mloto-wiertarki,wygląda jak nowa,będzie dalej służyć, cierpliwość daje dobry efekt,dobre Video,tak trzymać..

    @Bk99JzM@Bk99JzM4 жыл бұрын

  • @19:45 he notices he did it wrong! great video showing how you to do it correctly

    @hardyvanheerden8519@hardyvanheerden8519 Жыл бұрын

    • @24:10 You don't lubricate the inner parts at alll... but at the end of the video you put lubricant on the thread of the screw that holds the handle? the machine will not last long like that

      @hardyvanheerden8519@hardyvanheerden8519 Жыл бұрын

  • Комментарий в поддержку ролика и канала, а также труда мастера отреставрировавшего этот перфоратор.

    @lolcec81@lolcec812 жыл бұрын

  • Thank you for this video. Fascinating. I was so happy that all those parts worked, as I can't imagine how astoundingly expensive Hilti spare parts must be!

    @unclematt3@unclematt33 жыл бұрын

    • 00000l0 👆😪👆👆😪😪😪😪😪😃💖💖💖💖👆💖💖👆

      @marieclairegalang5600@marieclairegalang56002 жыл бұрын

  • Lastima k no vive en r.Republica Dominica eres el mejor

    @kelvinjose6113@kelvinjose61134 жыл бұрын

  • Very good, excellent

    @AliAli-vl9lu@AliAli-vl9lu4 жыл бұрын

  • Hilti rules simply best in business

    @nicolacoin9698@nicolacoin96984 жыл бұрын

  • This is some serious skill 👏🏽👏🏽

    @garveyjasonify@garveyjasonify4 жыл бұрын

  • Good job and you are smartly..

    @muhamadhamami3811@muhamadhamami38114 жыл бұрын

  • Not sure how in the world you remembered how everything went back when assembling. Well done!

    @jaime17000@jaime170004 жыл бұрын

    • Thank you!

      @gear_show@gear_show4 жыл бұрын

    • He has it all on camera lol probably takes lots of pics too?

      @Apathymiller@Apathymiller4 жыл бұрын

    • @@Apathymiller indeed, but still, this video had so many parts to reverse engineer

      @jaime17000@jaime170004 жыл бұрын

    • I think that is the reason how this kind of movies originate.

      @dirkmoras@dirkmoras4 жыл бұрын

    • He just record the fuc... Video!!! And you asking how?

      @ariels9161@ariels91614 жыл бұрын

  • You are really professional person, all the best

    @m.salehabdi6801@m.salehabdi68012 жыл бұрын

  • you are number one

    @attouahmed@attouahmed4 жыл бұрын

  • You are the BEST

    @Manuelhernand13@Manuelhernand134 жыл бұрын

    • Thank you!

      @gear_show@gear_show4 жыл бұрын

  • Your videos are perfect. Your levels of skill are top drawer!!!

    @markdunford3181@markdunford31814 жыл бұрын

    • Thank you!

      @gear_show@gear_show4 жыл бұрын

    • I agree.

      @carlmarquardt994@carlmarquardt9944 жыл бұрын

  • The Best Hilti ADV

    @alexgobo20@alexgobo204 жыл бұрын

  • Very Well Done.

    @gordbaker896@gordbaker8964 жыл бұрын

  • Sucker works like new, awesome!

    @stefanpariyski3709@stefanpariyski37094 жыл бұрын

  • Outstanding work and that goes for the photography too.

    @paulstevenson200@paulstevenson2004 жыл бұрын

  • What a great tool.... The built quality soo good, boith in material and durability...

    @kang.loekman@kang.loekman3 жыл бұрын

    • It really is!

      @gear_show@gear_show3 жыл бұрын

  • This seems like the only time this old hammer drill has seen some love in all its life. I hate seeing things get abused.

    @jackhewitt7902@jackhewitt79024 жыл бұрын

  • Great job

    @joseluisriga8636@joseluisriga86364 жыл бұрын

  • I learnt a lot from your video. Thanks for uploading it. Best regards

    @syedsayeedurrahmanzaini4221@syedsayeedurrahmanzaini42212 жыл бұрын

  • best asmr ever

    @Humanerror84@Humanerror843 жыл бұрын

  • Very relaxing video

    @mabroderie@mabroderie4 жыл бұрын

  • Dobra robota. Pozdrowienia z Lublina 🇵🇱

    @xiaomi9007@xiaomi90072 жыл бұрын

    • Привіт псяча крев батько наш бандера

      @Rom567dff@Rom567dff Жыл бұрын

  • Very nice, thorough restoration on an awesome hammer! Well done, sir!

    @getyourkicksagain@getyourkicksagain4 жыл бұрын

    • Thank you!

      @gear_show@gear_show4 жыл бұрын

  • Fixing a Hilti is the way.

    @olecranonrebellion9976@olecranonrebellion99763 жыл бұрын

  • Exelente trabajo mis respetos 👍👍 felicidades

    @guillermoroman7335@guillermoroman73353 жыл бұрын

  • Parabéns,o Senhor é um ótimo mecânico.

    @antoniosalla1986@antoniosalla1986 Жыл бұрын

  • ph, pz, torx, allen ... what a nightmare : 0 excellent job !!!

    @XXLAUTAROXX@XXLAUTAROXX4 жыл бұрын

  • Great job man!! I seriously wish I had your patience

    @khaledel-masri6813@khaledel-masri68134 жыл бұрын

  • Sir, you're great.

    @suhanasona7625@suhanasona76253 жыл бұрын

  • Excelente trabajo mi cuate.!!! 👍👌🏻👊🏻

    @inigualable.2963@inigualable.29634 жыл бұрын

  • Great work. 🔨🔧🔩 Thanks so much for sharing. 😎👌🏼

    @jtveg@jtveg2 жыл бұрын

  • We have one of these in the tool room in the shop at my school, it’s in a little better condition than before the restoration

    @longjohn580@longjohn5804 жыл бұрын

  • Thats a HILTI. They make the best powertools in the world.

    @MisterBroad@MisterBroad4 жыл бұрын

  • Good excellent restoration

    @hamidbz8040@hamidbz80404 жыл бұрын

  • Me faltó algo muy importante, el destacar su respeto por el cuidado del ambiente, al no utilizar solventes en la limpieza, solo agua y detergentes. Aplausos!!!!

    @rodrigoarayafritis7849@rodrigoarayafritis78492 жыл бұрын

  • That is a great video all component restored with perfectible hand thank you

    @fixawy@fixawy3 жыл бұрын

  • well done man

    @inokom3534@inokom35344 жыл бұрын

  • you are not a service you are just a cleaner,

    @olgertsejdini2740@olgertsejdini27404 жыл бұрын

  • Very nice brother !!

    @belsteed6050@belsteed60503 жыл бұрын

  • Good job

    @abdelmajidbsat3861@abdelmajidbsat38613 жыл бұрын

  • I have had guided tours through Bosch's Power Tool Factories in China and Germany. That was interesting and so was this!

    @AntzWilkz@AntzWilkz4 жыл бұрын

  • I would seriously love to see a behind the video special, especially your cataloging system for all the parts. You must have labels or something, to keep track of all the parts and their locations/order of installation.

    @Gorphee@Gorphee4 жыл бұрын

  • Good job amazing good save on the planet

    @ratsameecunningham666@ratsameecunningham6664 жыл бұрын

  • Professional work well done

    @ahmedosama7320@ahmedosama73203 жыл бұрын

  • hilti and duss super tools 🤘

    @cristipop5706@cristipop57064 жыл бұрын

  • Nice restoration. 👍👍👍

    @jrand2631@jrand26314 жыл бұрын

  • I also have such a hobby and I think it is exciting but, In Dk it is very difficult to get spare parts, as new is cheaper and the factory is usually abroad. and there are few or no companies to buy from. But there are the thrills to work with and the good memory you have. I take pictures continuously.

    @elbasse1@elbasse14 жыл бұрын

  • Great job. Job well done.

    @HafizurRahman-mw8bp@HafizurRahman-mw8bp2 жыл бұрын

  • 10:13 heard in background "I swear to God, if you are washing dirty power tools in my kitchen sink again!"

    @unclematt3@unclematt33 жыл бұрын

  • ماشاء الله ..عبقري 👍

    @user-gi7qk9ld5o@user-gi7qk9ld5o4 жыл бұрын

  • every days i waiting your new video .. me from malaysia thank you for nice video

    @apenggilo5335@apenggilo53354 жыл бұрын

    • Thank you very much :)

      @gear_show@gear_show4 жыл бұрын

  • Thats a shit ton of pieces/part for a power tool. WOWSERS!!!!!!

    @jamesfield5346@jamesfield53469 ай бұрын

  • Great job!! Tha's amazing for me- Even when the video last almost 25 minutes I thinks it's a job for long time because you had to disassemble it , to paint it and to assemble again. Congrats!! for your amazing job. You're a really handyman.

    @frankpen7627@frankpen76274 жыл бұрын

  • Very good.!

    @ngophuong4548@ngophuong45484 жыл бұрын

  • Crazy, we threw about 5 old "knackered " breakers out a few months ago in work. If only we had your skills. What is your background ?? You know every make of tool out there 🤯🤯😂😂

    @shaunsoutdetecting1671@shaunsoutdetecting16713 жыл бұрын

    • ¹S2w..

      @zlatinasingova3507@zlatinasingova35072 жыл бұрын

    • 8th

      @idrishbhaivohra6625@idrishbhaivohra66252 жыл бұрын

    • @@idrishbhaivohra6625 QA

      @debadas929@debadas9292 жыл бұрын

  • Beautiful machine! Well done!

    @itself227@itself2274 жыл бұрын

    • Thank you!

      @gear_show@gear_show4 жыл бұрын

  • Amazing 👍

    @user-in5lr4zf5g@user-in5lr4zf5g3 жыл бұрын

  • Hiltis are built like tanks, Go Finland!!

    @Jouco@Jouco4 жыл бұрын

    • Yes every components are made from hard and strong metal.

      @gear_show@gear_show4 жыл бұрын

  • Молодец! Awesome! Beauty!!!!👍

    @user-me5jq4gf8t@user-me5jq4gf8t4 жыл бұрын

  • Excelente dedicación eres el mejor

    @TheEdigafi@TheEdigafi3 жыл бұрын

  • Amazing work 👌👍

    @beincccam2405@beincccam24054 жыл бұрын
KZhead