Do you have the turbo diverter valve spacer from TTI Motorsports?
@bratt3ISАй бұрын
Thats just the factory valve with an intake for those who are curious.
@DOHCCordia2 жыл бұрын
Hey I have the same car but in blue and I want to paint my front aero black like you did. Are you able to make a video or send me some pictures of the front of the car? It would be much appreciated 😁
@TeaBagel4 жыл бұрын
Where do you purchase performance parts or upgrades for your rc
@kevinthouchalanh86475 жыл бұрын
Look it up
@monstrosityguy53753 жыл бұрын
Pretty sure its a Is not a rc
@jimofthejam53402 жыл бұрын
@@monstrosityguy5375 what's the point of saying this to someone who's looking for help ? Like just don't say anything, jeez youtube comments are pure cancer 🙄 .
@finpozacc1941 Жыл бұрын
eBay , vivid racing . Got me most my performance parts
@eeee5043 ай бұрын
were you in drive when you revved the engine? Been trying to figure out how to do this
@Cmunger176 жыл бұрын
Cmunger17 yea man just brake boost basically like you are about to do a burnout but before the back tires start spinning let off it’s usually around 2700 rpm
@chefboy_rr6 жыл бұрын
Tienes más fotos donde esta instalado el blow off por favor
@JAVIERANGEL007 Жыл бұрын
For all you that are curious, block the bov so it doesn't recirculate and then pop the lid off your air filter. You'll get that fluttering sound. Enjoy it for an hour or so, grow up and then put it all back how it's meant to be.
@XXB4XX6 жыл бұрын
What’s wrong with Turbo flutter?
@Cbenumea3 жыл бұрын
@@Cbenumea nothing wrong w the flutter, but doing what he said isnt good for the engine
@nytshft11 ай бұрын
Como lo pusiste yo no encuentro donde ponerlo
@vq35__flakito31 Жыл бұрын
Yo my guy how did you blackout the front lip? Plastic dip or paint, or wrap lmao?
@amanminapara19805 жыл бұрын
Aman Minapara it’s just plasti dip man but I did heavy gloss layers to get that finish also maybe doing it in an enclosed area like a garage so no particles end up underneath which causes the rough finishes
@chefboy_rr5 жыл бұрын
How u do it parked?
@MeowMiata2 жыл бұрын
Hi nice sound ! I have ct200 how making this sound in my car??? Please tell me!
@ukaukagang87763 жыл бұрын
Just put a aftermarket intake lmao it make the noise 🤣
@efilguht19412 жыл бұрын
ct200 based off the Prius platform. It does not have a turbo and will never sound like this.
@rubbertoe.Ай бұрын
What front bumper is this?
@fourthwrld5 жыл бұрын
stock front bumper, it's on some f sport lowering springs and I also plasti dipped it glossy black so it might look a little different from an angle or just the video.
@chefboy_rr5 жыл бұрын
Ryan Rivera oh shit it looked a lot bigger in this angle, definitely clean tho. I’m looking into buying an IS 200T also haha
@fourthwrld5 жыл бұрын
Did you put a turbo on it or a supercharge kit ?
@axelromero7336 жыл бұрын
Axel Romero stock turbo and I took off the engine cover and the engine blanket both of their main purposes are to muffle out sound, I also removed the air box filter. All pretty simple probably took me 20 mins to do everything
@chefboy_rr6 жыл бұрын
Stock blow of valve ?
@johnnyshabanov52386 жыл бұрын
Johnny Shabanov yes but it’s not considered a real bov and it’s basically just brake boost
@chefboy_rr6 жыл бұрын
does anyone how to install a bov on a is200t?
@andytran98722 жыл бұрын
For real any one know how to
@marykaye99072 жыл бұрын
My about to get my blow off valve put on so I’ll ask how they did it
@marykaye99072 жыл бұрын
Well the engines in is200ts have what’s called a bypass valve rather than a blow off valve and it you were to put a BOV on it, it would affect the fuel to air ratio meaning it wouldn’t be running the way the ecu wants which can cause other issues with the car.
@emberwoodbasketballassocia2239 Жыл бұрын
That's the factory bypass valve. You get this sound from installing an aftermarket intake and a turbo muffler delete.
@MugenAlt236Ай бұрын
What mods?
@doltoncaravantes27143 жыл бұрын
SI and Type-R sticker
@Twoonele3 жыл бұрын
@@Twoonele def no mods on this car 😂
@eeee5043 жыл бұрын
Sounds like a sewing machine
@codymachado2 жыл бұрын
Lol jk im sure it sounds dope in perspn
@codymachado2 жыл бұрын
@@codymachado lol it kinda did, it was a lot cooler in person but I ended up getting rid of the car. It wasn’t the best bang for your buck 😂
@chefboy_rr2 жыл бұрын
What brand bov?
@josehernandez-li9bi3 жыл бұрын
Not a bov just intake
@RcvzPhotography2 жыл бұрын
Not a blow off valve that’s a intake
@topg196410 ай бұрын
lol the car is bone stock. It’s pretty much just break boost releasing.
@chefboy_rr10 ай бұрын
@@chefboy_rr just induction noises from the intake
@topg196410 ай бұрын
*Any downsides to this?*
@IDABAYAREA650I5 жыл бұрын
Sparks needed to be replaced at 50k, because it caused sputter in 4th gear at about 5700 and the car would go into limp mode on the freeway. Nothing happened and I was able to pull over fine, but once I shut the car off the car would need to sit for 30 seconds and then was able to start with no issues and be driven "economically" back home.
@chefboy_rr5 жыл бұрын
No issues since, but I have the K&N in their now just to prevent from happening again, sounded cool while it lasted , but its not worth it haha.
@chefboy_rr5 жыл бұрын
Ryan Rivera *Ah ok i won't do it lol, i bought this car but waiting for it to get here to cali from Colorado, since you own the car what are your thoughts on the cup holders lol, what about passengers who put there elbow on it any comments?*
@IDABAYAREA650I5 жыл бұрын
IDABAYAREA650I Cup holders are good I work at Starbucks haha and it fits the trenta size cups or any super big gulp fine. Since I had this car throughout the end of high school I was still playing football so unfortunately I had dirty and oily elbows from after practice and overtime tore on the center console and driver side door had to be replaced. So just be careful on resting your elbow after the gym or anytime you are a little sweaty lol.
@chefboy_rr5 жыл бұрын
Ryan Rivera lol forsure, but would you say it's a little awkward for yourself in the spot it's in and seems uncomfortable for passengers?, cause no lie when i was test driving it before i bought it that's what came to mind it's in such a awkward spot, and would be uncomfortable for people that try and put their Elbow on it hahah
Let’s get a mod list video!
What other mods do you have to get that flutter?
Do a installation video
Do you have the turbo diverter valve spacer from TTI Motorsports?
Thats just the factory valve with an intake for those who are curious.
Hey I have the same car but in blue and I want to paint my front aero black like you did. Are you able to make a video or send me some pictures of the front of the car? It would be much appreciated 😁
Where do you purchase performance parts or upgrades for your rc
Look it up
Pretty sure its a Is not a rc
@@monstrosityguy5375 what's the point of saying this to someone who's looking for help ? Like just don't say anything, jeez youtube comments are pure cancer 🙄 .
eBay , vivid racing . Got me most my performance parts
were you in drive when you revved the engine? Been trying to figure out how to do this
Cmunger17 yea man just brake boost basically like you are about to do a burnout but before the back tires start spinning let off it’s usually around 2700 rpm
Tienes más fotos donde esta instalado el blow off por favor
For all you that are curious, block the bov so it doesn't recirculate and then pop the lid off your air filter. You'll get that fluttering sound. Enjoy it for an hour or so, grow up and then put it all back how it's meant to be.
What’s wrong with Turbo flutter?
@@Cbenumea nothing wrong w the flutter, but doing what he said isnt good for the engine
Como lo pusiste yo no encuentro donde ponerlo
Yo my guy how did you blackout the front lip? Plastic dip or paint, or wrap lmao?
Aman Minapara it’s just plasti dip man but I did heavy gloss layers to get that finish also maybe doing it in an enclosed area like a garage so no particles end up underneath which causes the rough finishes
How u do it parked?
Hi nice sound ! I have ct200 how making this sound in my car??? Please tell me!
Just put a aftermarket intake lmao it make the noise 🤣
ct200 based off the Prius platform. It does not have a turbo and will never sound like this.
What front bumper is this?
stock front bumper, it's on some f sport lowering springs and I also plasti dipped it glossy black so it might look a little different from an angle or just the video.
Ryan Rivera oh shit it looked a lot bigger in this angle, definitely clean tho. I’m looking into buying an IS 200T also haha
Did you put a turbo on it or a supercharge kit ?
Axel Romero stock turbo and I took off the engine cover and the engine blanket both of their main purposes are to muffle out sound, I also removed the air box filter. All pretty simple probably took me 20 mins to do everything
Stock blow of valve ?
Johnny Shabanov yes but it’s not considered a real bov and it’s basically just brake boost
does anyone how to install a bov on a is200t?
For real any one know how to
My about to get my blow off valve put on so I’ll ask how they did it
Well the engines in is200ts have what’s called a bypass valve rather than a blow off valve and it you were to put a BOV on it, it would affect the fuel to air ratio meaning it wouldn’t be running the way the ecu wants which can cause other issues with the car.
That's the factory bypass valve. You get this sound from installing an aftermarket intake and a turbo muffler delete.
What mods?
SI and Type-R sticker
@@Twoonele def no mods on this car 😂
Sounds like a sewing machine
Lol jk im sure it sounds dope in perspn
@@codymachado lol it kinda did, it was a lot cooler in person but I ended up getting rid of the car. It wasn’t the best bang for your buck 😂
What brand bov?
Not a bov just intake
Not a blow off valve that’s a intake
lol the car is bone stock. It’s pretty much just break boost releasing.
@@chefboy_rr just induction noises from the intake
*Any downsides to this?*
Sparks needed to be replaced at 50k, because it caused sputter in 4th gear at about 5700 and the car would go into limp mode on the freeway. Nothing happened and I was able to pull over fine, but once I shut the car off the car would need to sit for 30 seconds and then was able to start with no issues and be driven "economically" back home.
No issues since, but I have the K&N in their now just to prevent from happening again, sounded cool while it lasted , but its not worth it haha.
Ryan Rivera *Ah ok i won't do it lol, i bought this car but waiting for it to get here to cali from Colorado, since you own the car what are your thoughts on the cup holders lol, what about passengers who put there elbow on it any comments?*
IDABAYAREA650I Cup holders are good I work at Starbucks haha and it fits the trenta size cups or any super big gulp fine. Since I had this car throughout the end of high school I was still playing football so unfortunately I had dirty and oily elbows from after practice and overtime tore on the center console and driver side door had to be replaced. So just be careful on resting your elbow after the gym or anytime you are a little sweaty lol.
Ryan Rivera lol forsure, but would you say it's a little awkward for yourself in the spot it's in and seems uncomfortable for passengers?, cause no lie when i was test driving it before i bought it that's what came to mind it's in such a awkward spot, and would be uncomfortable for people that try and put their Elbow on it hahah