Delta Fighter can take off from grass and its awesome! cults3d.com/:1837918
Пікірлер
I like seeing all these builds get more and more maneuverable! If you're making larger "6th gen" fighters, I know this is a crazy idea, but could you install an airsoft machine gun, and fpv camera? That would be crazy for dog fights! :D
@zaflowgalacticАй бұрын
I can't wait to see the 90mm version
@Soshstar999Ай бұрын
Ok that grass ops gear up takeoff was amazing
@lewiemotorsports3616Ай бұрын
Thanks! I was as fun as it looked
@hotlapkyleАй бұрын
That's literally the coolest one I've seen.. imagine a carbon fiber version 🤯🤯🤯
@carlosgaines3692Ай бұрын
I may need to make one in CF
@hotlapkyleАй бұрын
That was COOL!! I have a 75mm Hobby King Flycat that I take off from the grass all the time. You just need to have some wind in order to do it.
@Blackys-BoyАй бұрын
Very cool. Nope no wind needed
@hotlapkyleАй бұрын
Very cool! I bet it will flat spin with rudders.
@markmiranda2881Ай бұрын
Perfect landing
@carlosgaines3692Ай бұрын
I really like your videos! (So much I just ordered a Bambu lab printer..😁🤑) I am very impressed how these little machines flies!! Would love to see you make a starfighter or maybe a SR-71. (However after watching an assembly of one of your planes, I noticed that you make the inside of the controlsurfaces flat. I think they would benefit from being rounded or angled, thus creating a tighter fit, and reducing the gap between the wing and controlsurface). Looking forward to your next video! 👍
@PhoneyBillАй бұрын
Great to hear! Welcome to the club. Definitely join my FB group Kyle’s designs 3d printed airplanes. We can help you get setup printing like a champ. You’ll need settings for LW PLA. Yes the control surfaces would benefit from being more beveled but you’ll soon see why I don’t do it 😄 trying to print a rounded part as thin as a control surface becomes difficult. You’ll see why soon
@hotlapkyleАй бұрын
Nice. My printer is running nonstop since you released shmiggen 😅
@twotonez1141Ай бұрын
don´t launch on the gras, smoke it 🚬 😂😂......great video and flight 💯.....thumbs up👍👍
Ай бұрын
Perhaps you could mount servos with linkage on top for the 90mm grass opps delta
@stephensowell9578Ай бұрын
Badass jet! I think I need a 3d printer 😂
@FlyTimeRCАй бұрын
Saw the comment that recommended this on cults. Idk how I like it to much grass
@aidenkahn4338Ай бұрын
2 bowls.
@user-it8mt3zg9fАй бұрын
@@user-it8mt3zg9f 2 bowls? I'm confused can you allaborate
@aidenkahn4338Ай бұрын
@@aidenkahn4338 Smoking a bowl?
@JDDupuyАй бұрын
@@JDDupuy ha you know it
@aidenkahn4338Ай бұрын
thats brilliant!
@dennismatovich8411Ай бұрын
Off the grass 😮
@carlosgaines3692Ай бұрын
Can you put a video on how you tune you planes? Like cg, on the transmitter and all the important "ratios"/ other things that help make the plane fly? Also what remote do you recommend from spectrum and what do you use?
@Aerospace_Engineering_NoobАй бұрын
Sure I’ll try to make one!
@hotlapkyleАй бұрын
Maybe you could use the ailerons drag for stirring on the grass… (in opposite direction!)
@rudkratz3907Ай бұрын
Good idea!!
@hotlapkyleАй бұрын
Cheers 👍💪✌
@rjung_chАй бұрын
The 64mm files are giving me a height warning on the fuselage files. Using P1P Bamboo. Do I need to break the part up using your video I assume?
@JDDupuyАй бұрын
Yes you can just slice the part in Bambu or I can slice it for you. It’s super easy. Just make sure the right side is facing down after you split the parts. I literally did the same for the 90mm. None of the parts would fit so I had ti cut every part in 4
@hotlapkyleАй бұрын
@@hotlapkyle Okay let me try to split myself. Thanks!
@JDDupuyАй бұрын
One more question what size magnets are you using, width and thickness?
@JDDupuyАй бұрын
You could waterproof it, would probably do the same off water
@olliehanimationАй бұрын
I was wondering about it taking off from the grass , my air boat went on grass
I like seeing all these builds get more and more maneuverable! If you're making larger "6th gen" fighters, I know this is a crazy idea, but could you install an airsoft machine gun, and fpv camera? That would be crazy for dog fights! :D
I can't wait to see the 90mm version
Ok that grass ops gear up takeoff was amazing
Thanks! I was as fun as it looked
That's literally the coolest one I've seen.. imagine a carbon fiber version 🤯🤯🤯
I may need to make one in CF
That was COOL!! I have a 75mm Hobby King Flycat that I take off from the grass all the time. You just need to have some wind in order to do it.
Very cool. Nope no wind needed
Very cool! I bet it will flat spin with rudders.
Perfect landing
I really like your videos! (So much I just ordered a Bambu lab printer..😁🤑) I am very impressed how these little machines flies!! Would love to see you make a starfighter or maybe a SR-71. (However after watching an assembly of one of your planes, I noticed that you make the inside of the controlsurfaces flat. I think they would benefit from being rounded or angled, thus creating a tighter fit, and reducing the gap between the wing and controlsurface). Looking forward to your next video! 👍
Great to hear! Welcome to the club. Definitely join my FB group Kyle’s designs 3d printed airplanes. We can help you get setup printing like a champ. You’ll need settings for LW PLA. Yes the control surfaces would benefit from being more beveled but you’ll soon see why I don’t do it 😄 trying to print a rounded part as thin as a control surface becomes difficult. You’ll see why soon
Nice. My printer is running nonstop since you released shmiggen 😅
don´t launch on the gras, smoke it 🚬 😂😂......great video and flight 💯.....thumbs up👍👍
Perhaps you could mount servos with linkage on top for the 90mm grass opps delta
Badass jet! I think I need a 3d printer 😂
Saw the comment that recommended this on cults. Idk how I like it to much grass
2 bowls.
@@user-it8mt3zg9f 2 bowls? I'm confused can you allaborate
@@aidenkahn4338 Smoking a bowl?
@@JDDupuy ha you know it
thats brilliant!
Off the grass 😮
Can you put a video on how you tune you planes? Like cg, on the transmitter and all the important "ratios"/ other things that help make the plane fly? Also what remote do you recommend from spectrum and what do you use?
Sure I’ll try to make one!
Maybe you could use the ailerons drag for stirring on the grass… (in opposite direction!)
Good idea!!
Cheers 👍💪✌
The 64mm files are giving me a height warning on the fuselage files. Using P1P Bamboo. Do I need to break the part up using your video I assume?
Yes you can just slice the part in Bambu or I can slice it for you. It’s super easy. Just make sure the right side is facing down after you split the parts. I literally did the same for the 90mm. None of the parts would fit so I had ti cut every part in 4
@@hotlapkyle Okay let me try to split myself. Thanks!
One more question what size magnets are you using, width and thickness?
You could waterproof it, would probably do the same off water
I was wondering about it taking off from the grass , my air boat went on grass
How can I purchase a delta
Should be a link in the description