Watch this before installing a LED bulb
2021 ж. 26 Там.
770 649 Рет қаралды
What will happen if a LED bulb is misaligned?
LED bulb position adjustment
LED bulb orientation
What will happen if a LED bulb is misaligned?
LED bulb position adjustment
LED bulb orientation
Respect for not just telling how it should be done but actually removing lights, adjusting, reinstalling and showing. 👏
get a room jesus
which is? tl;dr
😮স@@donsta155
This video was a huge help! When I originally installed the LED bulbs in my projectors I did notice the light output and pattern seemed offset. But assumed that’s just how they are since it’s not HIDs. And then when I saw this video about LED bulbs oriented to 9 & 3. I went back to check my bulbs and sure enough they were unaligned. So I had to readjust them to 9 & 3 position. And now the light beams look just like your example of properly aligned bulbs. Thank you and God bless you Po! 🙏🏼
Hi King Jesus Channel. We are glad to hear that we were able to help you with this content. Thank you for watching and took time to drop a comment. God Bless you too and always stay safe.
Awesome! Thank you for sharing this information on LED bulbs. Just bought LED headlight bulbs and will have it placed to the 9 to 3 orientation. Salamat!
You might have been the only person that has helped fixed my wife's car. I'll try to update after it's fixed. Thank you for actually explaining things
Yep, update us all 😂
I have had a few different LED bulbs that were clockable, wasn't too fond of most of them as the design would allow them to slip out of adjustment when being installed because of the mounting tabs sometimes not being in tolerance with the housing slots, and causing the locking collars to slip. As someone who test out various lights myself, I know about clocking, but for those who don't, you have made a very educational, informative video. Not everyone who makes a video on KZhead knows what they are talking about.... thanks for helping people by being someone who does. 👏
Thank you for taking time to share this here. We appreciate it so much
I tried using the 9&3 headlight setting on my Civic UFO, and while it did make the road brighter for me, I noticed that it could potentially glare into the eyes of any drivers coming towards me. So, I decided to switch to the 12&6 setting instead, as it seemed safer for everyone on the road. With the 12&6 setting, I could still see the road clearly, but without causing any inconvenience or danger to other drivers. Even my wife agreed that the 12&6 setting was the better choice for the safety of all road users, especially those coming towards us. But lastly for the down fog lights 9&3 are the best as you are not blocking any upcoming driver because your lights are mostly facing down when driving on streets
Great video, not even manufacturers state this info in their manual and instructions. Got to try this tomorrow. Thanks man.
Hi TheCvele1974 thank you for watching. Stay safe
You must have bought some very cheap bulbs! Because all the reputable companies have instructions on installation and the orientation in which the bulbs need to be for a correct beam pattern.
Interesting video! After installing new LEDs for my projector headlights, I noticed it was misaligned. This video helped me how to align my LEDs better :)
Excellent tutorial kuya! Will make sure to install mine the correct way.
Much appreciated, you explained every question I had about the installation I did with an undesired outcome. Now I can fix em properly! Thank you!
Thank you sa napaka-informative video! Thanks, sir!
Thank you sir!! The examples at the end were exactly my headlights on a 2003 Avensis.. Huge thanks now i can enjoy the lights
You are welcome. Thank you for watching as well. Drive safe and stay safe.
Thank you so much for your help. i had a "professional" install new H11 and he could not understand why, one side was dimmer than the other side. but i searched the web and i found you. i did it myself. the only tool i used was an island tool, luckily i had such tool. you saved me time and money, because you explained the positions. Again Thank you so much. i subscribe.
I've noticed that many of the newer headlight designs have a shade with only side openings, i.e. the LED lights are supposed to illuminate the 3 and 9 o'clock positions.
This was not a good video, it was a GREAT video. One of the best, if not THE BEST video covering installation and adjustment of new led lights, comparison, etc. 👍🏻
Yes, 9 and 3 should always be used on a projector halogen optical. I use H7. On high I have HB3 it's for the reflector on the side
What kind of car did you put the h7s in?
@@cliftonjones4235 Volvo S40N 1.8 2006
This has got to be the most informative video I’ve ever seen.
Thanks for this video. I just installed some yesterday, but didn't know about 3 and 9 alignment, so I need to go and check. 👍
Just wanted to thank u for this awesome video went checked my led and weren't aligned now thanks to u they are perfect 👌 thanks for showing step by step on how to do it
Thank you so much Alfredo.
You weren’t lying when you said must watch 😂 👌
Very nice video friend
Thank you very, I was literally headed outside to install my new Auxito LED lights then your video came across my feed as I was getting up to head outside, I was just going to put them in regardless of how they were seated thanks again 😊
thank you @louiswatson6227
Very useful video. Thanks for sharing this information with a demo.
Thank you so much for this upload! Extremely helpful! Thumbs up from me... Stay safe... Rico
Thanks for vid. My led bulbs on motorcycle kept blinding on coming drivers and they would not adjust lower. My bulbs were adjusted to 6 and 12 o'clock. Will change in the morning to 3 and 9 then readjust.
Very Precise Info ! I have an Osram HB3 LED, should I align the LED strip in a way that it is perpendicular to the smallest of the three clips on the LED bulb ?
Thanks! this explanation was the best 👌🏿
This is a good informational video. Now all i need to do is find a moderately priced bulb that is bright enough for me to see but not so blinding it's dangerous to incoming traffic.
Good work. This help me visualize beam angle and what are actual good results. Godspeed!
Thank you dsubversion. Drive safely and stay safe
Awesome info! Thank you!
Great job on this video.. Super helpful
thanks dude. this video is a huge help for me
Thanks for the amazing explanation
Very helpful. Thank you!🙏
I can’t find a proper led bulbs for my 2006 Honda crv, I just wondering there’s a compatible bulb like what you installed in your car and so with the fog light bulb
Pound and a bear hug. Thank you.
Awesome and informative video. Really well done and explained all the way through :)
Thank you so much
Great information 🙏
So is the led part of the halo LED lights around the turn signal lightbulb?
Well explained ...Thank you 😇
Very informative video, its exactly what i wanted to know
The correct alignment for LED is 3 and 9 o'clock position. But thanks for still trying it out. What LED bulbs are these? What brand?
Very good explanation, helps me a lot. Thanks from Brazil.
You are welcome! Hello Brazil
Hi there. I keep return most led headlight for my Lexus es350 2009 there is none fit it but auto part said H7 must fit and Amazon said so....should I replace wire connectors socket?
I’ve installed similar type of leds on a 2016 honda crv fog lights 9 to 3, but I still blind upcoming traffic that way! The fog lights are reflectors, is the 12 to 6 way should change that or what can I do to fix it?
Hi JC Rosario thank you for watching. IMHO LED's are not designed for reflector headlights and fog lights. Due to the LED's high intensity brightness, it produces unwanted glare. One way to reduce the glare is to tilt down the beam angle. Reflector fog lights are designed to project a scattered light. Installing high lumens bulb will definitely cause discomfort to the on coming traffic.
Which software do you use for making presentation?
Thank you, best video for LED position adjustment...
Thank you
thank you for educating me.
Thanks this is the best explanation 👌🏼
How long did it last are they reliable
Thanks for the video! I have a dumb question, what's the technical difference between Fog Light vs High Beam? (aside from the position and functionality) I'm trying to buy a replacement for my high beam and found one but its advertise as fog light and compare it to other high beams I can't seem to see the technical difference between them.
If the bulb number and color is the same then it doesn’t matter, it’s position on the vehicle will ultimately decide if it is functioning as a fog light or a high beam and the reflector it’s installed behind dictates the light pattern so you can ignore the “fog” label.
@@jaxturner7288 thanks!
Lovedit, many thanks.
Great video, thanks!!!
Good job bro 🙏
Hello Pat, thank you for the detailed video! Why did you use leds instead of HIDs?
Convenience. I love the light intensity of HIDs however the ballast are such a hassle. With LEDs the drivers are compact. Thanks huangalden
Yes Pat, it's like 2 ballasts per bulb for HIDs. Thanks
Is this also a reason why there are dark spots on the road when I drive? I put 9005 LEDs in a projector housing for the headlights, when they are made for halogen.
heeey thanks a lot for your video!
I really need help, I ordered a pair of oxilam’s (9012) for my 2014 Durango and when locking it into place, the chips are sitting at about the 10 and 4 or 11 and 5 o’clock position…sadly they aren’t adjustable. Are there any work-arounds for this or will I have to return them?
I stay away from none adjustable bulbs, particularly LEDs. This is one of the reason. IMHO not all headlight assembly are the same. Thanks
Thank you Sire !!!
You are welcome Julio Gomez. Thank you too
Good job!
Thanks for this very helpful video. Which brand of LED are you using which came with adjustable LED head?
looks like philips xtreme ultinon
Thank you for this.
Helli, I installed led bulbs on my motorcycle on position 9-3 and the light pattern has some dead spots is there any solution for this issue
I did this and I have huge dark spots in my halogen designed projector. Clocking it different doesn't help
Thanks for this useful video
Thank you ffh2303
Do these work on a Subaru wrx
Good video, Make more
I'm kinda heated that my headlight housings only allow for certain ways to install. Even with the adjustable collar there is only so many options.
Very nicely explained....
Thank you
Thank you for the information. We put L.E.D. bulbs in my sons car. The light doesn't seem to be what it should be. We will have to check the position of the bulbs.
Amazing!🙏🏼
How did you adjust the height of the light output in real time after installation? That was the coolest thing I’ve ever seen!
HIs car had height adjustment servos and a selector on the panel.
Hi Aeoreka2, i just clocked the led in the proper alignment resulting to a better beam patern. Thank you
Thanks for this knowledge
What led lights are brighter I want it yellow light?
Very important update ! I liked it. !!
Hi Sandal Flower. Thank you for watching and taking time to drop a comment. Stay safe
Salamat pre👍. Merry Christmas😊
Merry Christmas and Happy New Year. Maraming salamat din
Thank you!!
The chips facing up works better for me no blind spots driver or passenger side non projector housing.
Thank you for sharing.
I own a 2012 VW cc 2.0t sport and my right side passenger low beam bulb went out and I’m trying to upgrade to hid or led what are the best bulbs out there for my car year
For HID I’d go with Osram Cool blue boost or Phillips extreme vision gen 2, for Led the best ones are GTR Ultra 2,morimoto and there are some other cheaper ones that are great also just gotta do your research
Do you have link on where you bought the projectors sir? Thank you!
facebook.com/kenneth.balahadia10?mibextid=ZbWKwL
Hi @goPat Channel do you service LED alignment?
Hi claro, sorry i don't do bulb service alignment. You might want to consider bringing your car to a auto accessories shop. Just give them instructions on what to do. Thanks for watching stay safe
Bro. Can you do a video on the installation positions of H4 Mini LED lights too? Thanks.
If you have front windshield tinted, you will have to get brighter LED"S!!!
Can I have the title of the funky 70s soundtrack? ☺️ thank you!
Very good, Sir.
Many thanks
I got free leds because guy couldnt clock them. I trried but the positioning and the screw set positions would not allow a 3 9 position, more like 4 and 10. I removed the screw, set perpendicular so 3 9 then added a dab of superglue to the screw hole. They have been set 3 9 for a year now.
Hi bro can you send me the link for your projector lamp thanks
Gen 3 Lincoln Town Car The notch is at the bottom. I can only put it in one way.
Where did you buy The projector lens, sir?
You may search for kenneth balahadia on facebook.
Fantastic video. Thank you
Thanks bro
Bro just installed my led light name Fahren led the left one lower than right one would you mind to help me please
3 and 9 is how I set mine up.
Great !!!
How about the philips ultinon essential gen2 led bulb sir?can i adjust the bulb position?
Hi Edward Newgate sorry i am not familiar with this brand model. I haven't seen the actual bulb. Thanks
Hi, a bit late to the party, dunno about the essential but with the ultinon pro 6001 you can adjust the position! not by much but you definitly can
Awesome can u do the same test with reflector housing
Hi Rich n Vick thank you for your suggestion.
Best led lights for headlights are 9 & 3!!!!!!!!!!! NEVER 12 & 6 what is wrong with companies making 12 & 6 for!!!!!! STOP WASTING PEOPLE'S INSTALLATION TIME WITH WRONG LED BULBS POSITION of 12 & 6!!!!!!!!!!!!!!!
I bought some headlight expert bulbs i told them they will not clock to 9&3 more like 10&4 so then they tell me 9012 bulbs should be at 12&6?? Any truth to this ya think?
I tried using the 9&3 headlight setting on my Civic UFO, and while it did make the road brighter for me, I noticed that it could potentially glare into the eyes of any drivers coming towards me. So, I decided to switch to the 12&6 setting instead, as it seemed safer for everyone on the road. With the 12&6 setting, I could still see the road clearly, but without causing any inconvenience or danger to other drivers. Even my wife agreed that the 12&6 setting was the better choice for the safety of all road users, especially those coming towards us.
Hello i replaced my halogen bulb with auxbeam gx i got much brighter light but unfortunately i lost the distance as my halogen reach father distance I noticed that my halogen bulbs are shorter (bulb length)than the led and i think this affect light focusing how could i solve this my led is h9
Hi ahmad kareem, some leds dont produce a good beam patern. Some are poorly designed, resulting to bad light output. If the led is longer that the halogen is fine, what is important is the height of the led diodes should match the height of the halogen filament. This will be in my upcoming vlog. Thanks
Does it matter which side goes to which side as one side of the led is different than other, is there which ones is up and down.
Updating my reply Hi its yo boy nik. Thank you for watching. Usually LED diodes positions are identical to each sides. Both sides will emit light the same way. Thank you
thank you