Insulated Studs? This is a BIG Innovation in Framing!
In this video, Matt travels to Minnesota to see a house framed with a new innovation in framing that solves the Thermal Bridge issue with typical 2x solid studs. You don't want to miss this Build Show!
Go to www.tstud.com - FYI - This video has overloaded their small company with inquiries so please be patient with their response times.
TSTUD Instagram - / thetstud
Huge thanks to our Show sponsors Polywall, Huber, Dorken Delta, Prosoco, Rockwool & Viewrail for helping to make these videos possible! These are all trusted companies that Matt has worked with for years and trusts their products in the homes he builds. We would highly encourage you to check out their websites for more info.
www.Poly-Wall.com
www.Dorken.com
www.Huberwood.com
www.Prosoco.com
www.Viewrail.com
www.Rockwool.com
This is why I subscribe to Matt’s series. Such informative, progressive information about smart construction. Love it. Great job Matt 👍
Thanks Craig! Appreciate your support.
Contacted them already. I didn't know about the R-30. What would YOU fill the large cavity with? Foam/batt/fluff? I would be curious how the close off the joists to keep that R value.
K Tauber I don’t know who your question is directed to but I would have all run electric and water lines then spray closed cell foam. If cost is an issue then batt would be my second choice and loose fill last. I’ve seen a lot of settling with loose fill.
@@DonaldDump2024 I'm sorry, I must have hit your thread instead of a new one by mistake. It was for Matt. I too have seen settling with blown. 8" of foam seems a bit steep. ( I don't have much experience with foam) I was looking at doing a R-30 (+) addition/remodel to my house. CIFs were really expensive, so these might do the trick with the R-30 and maybe Zip-R. With the 2.0 sealing method of course.😁
what a waste of money just but for foil face 1 inch foam all around under the siding then tape the seams and around the windows
This owner is an engineer. I like listening to guys that talk numbers.
yeah then he just cant help appreciate how cool it is when he shows the 2x8 and hes just like "so that, thats sick" haha this guys great
I was not expecting Brian to say "that's sick"
This has incredible potential in the container home and small dwelling categories. Heating and cooling inefficiencies in this type of building are what cause so many issues, this could solve many. cool vid.
only problem if it catches fire
I don't find myself getting excited about building products that often , but this has changed that. what a great product . I'm building within the next year and this is now in my plan. Thanks Matt
Did you end up using them?
12:54 "That's sick" Understatement of the year right there.
Zac M immediately caught that XD
These are the videos that make "The Build Show" quality. Step change in building is where it's at.
A thick wood beam insulates fine. They build log cabins from wood in the coldest parts of the world and have no issues. You’re bs’ing and you know it.
@@TonyMontanaOG wood is about an R value of 1.4/inch. That would make a 12 inch beam about R17. Reasonable yes, but keep that fire burning or it'll get cold. With closed cell foam at R6/inch that same 12 inches would be somewhere around R70.
T-stud is a wood version of the structural steel frame that's studied in universities under Mechanical engineering programs etc. It seems to be a good application. Congratulations
I now have a new favorite youtube channel. Matt is awesome and the information he shares is interesting and useful. I had no idea a lot of these technologies existed. Thanks Matt!
A nice bonus is that wide nailing surface when splitting studs with a panel. Seems like a good upgrade when hanging some of the thicker Zip-R sheets
James Shea, your comment about Clive's LED headlamp teardown just popped up on a video I am watching about engineered, internally insulated studs for building homes. I've seen this sort of thing happen before. What the heck is going on with KZhead? Their software has got some serious bugs in it.
IF THEY DONT SPLIT!...ASK A CARPENTER
@@MD-cd7em , it's worth noting that I did not hear anyone say what type of wood they're using for these engineered studs. Probably not Doug Fir. ( The type of tree that quality "studs" come from, and no it's not some pornstars on-screen name either. If such a person did exist, of course, his motto would be "got wood, will travel.!")😁
@@MD-cd7em And split they will. Especially if they are kiln dried hem fir or yellow pine as most 2 x 3's are.
An R30 3x8, with more nailing surface, more rigid, straighter, lighter, less waste... sick, absolutely SICK!
I dont understand how this isnt the standard here in Vancouver, as the city has been driving towards these kinds of numbers for the last 3 years. (we are framing 2x8 just to meet R-value compliance for instance)
@@nevar108 The Tstud provides that extra level for customers who are looking beyond mandates.
@@avid0g My only concern for the Vancouver market is how this material can be recycled when a house gets torn down in the future. AS of this time, 90% of a demolished home needs to go through the recycling process... spray foam is vastly frowned on as a result here. (and yes the system is flawed...)
@@nevar108 The totally obvious answer is to not recycle the studs. Reuse them. Reuse entire houses or relocate them. Why demolish?
@@avid0g I couldnt agree with you more. BUT, trying to convince the clients is something else. The actual house here in vancouver typicaly represents only 5-10% of the value of the property.... the land is the value. We have unfortunately torn down houses that are less then 6 years old, to build to a clients specification. They own the plot, they decide how they spend their money.
If an Energy Modelling will be performed, it will be evident that the best way to combat thermal bridging is from the outside. 1 1/2"or 2" xps rigid insulation (CI) with a rainscreen system for exterior finish is sufficient while at the same time, that pushes the Dew Point to the sheathing line. I still think that keeping the extreme cold temp. away from the sheathing is still currently the best at the moment.
This creates a moisture mold potential. Check the research at cchrc.org
@@jeffreyaderholdt2359 The building standard in Europe is insulation from the outside. The moisture issue is addressed by placing a vapor barrier around the wooden structure before any insulation is placed. And the recommended insulation thickness is pretty huge. 20 cm polyisocyanurate usually. That and the vapor barrier do a lot against moisture. Then again I'm unfamiliar with what happens in American climates with that system, so take this with a grain of salt.
External insulation is good but XPS or foil/plastic faced foam sheets (taped) are effectively a vapour barrier. The thickness required to keep the sheathing side below the dew point depends on the climate zone and the thickness of inboard insulation. Very common up here to use 1" or 1.5" exterior foam sheets over batt and 6 mil poly on the inside wall. So a double vapour barrier nono with the sheathing below the dew point in winter. It is safer to use a vapour permeable exterior insulation like rockwool board. One can use really thick foam, but then fastening siding becomes more complicated.
@@jamesroscoe7555 From where I am, the min. required for residential exterior wall remains R-20 (6" batt will take that to R21). With the addition of 1,5"xps in front of the permeable Bldg. paper over sheathing will take that wall to R28.5 thus combat Thermal Bridging at the rim board level (2nd floor) all the way to foundation. This system is very much applied once using steel stud. 1.5" xps is not required on wood framing as per Ashrae 90.2. 90.1 can also be applied for low rise and commercial where an optional Mechanical System Performance Path allowing HVAC system efficiency tradeoffs based on TPSR. And yes, clarification to prescriptive envelope performance data tables must be met in different zone from where I am.
You were right down the road from me! I'm incredibly impressed by this product thanks for sharing!
As a firefighter, one concern I have when I see these products come out is, how will they perform under fire conditions? That is usually not discussed in these promotional videos. As a rule, when you go from solid wood construction to web truss or I-beam construction, the materials will fail and collapse much faster in a fire. Lots of firefighters have been caught in structure collapses because of how quickly these structures fail once they start burning. So, I would really want to see some testing of how this would hold up under legitimate fire conditions before I would build with it. Besides that, it looks like a really great product.
Fire study was done on their website. It leads to this page. static1.squarespace.com/static/59cce8bba9db0941ea92e75f/t/59d258c6a803bbde4f0bcc62/1506957510626/16-4787319376DevReport+%28002%29+UL+Testing+of+Tstud.pdf
Add to the list the , what you breath in fighting a fire. I'd rather inhale a bit of burning pine than foam
@@johnSR32 If fire gets to the studs it over...the only concern would be the firefighters...its all about the envelop in building..dealing with the first hour for the occupants to get away safely...thats it....Oh yes I agree how healthy is your home...well thats the million dollar question.
That kinda info doesn't serve well in this sales pitch of snake oil
I'm not a firefighter but I have talked to a few that say new houses are far more dangerous than an old one. They go up so fast.
"My guess is you're gonna add a ton of structure strength". " I saw a 2x4 shot out of a cannon at 100 miles an hour into a panel of plywood and spray foam and it like just bounced off". Wow, really great stuff. Your comments are educational, informative and relevant. Keep up the good work.
First I've heard of the T Stud, totally impressed. Welcome to Minnesota Matt, many of us up here follow you and love your content, keep it coming!!!
I wish this product was available when I built my house. good stuff thanks Matt.
I use my thermal imaging camera when doing inspections, and it's amazing how you can see the location of every stud or firring strip when it is hot outside. Those babies conduct so much heat or in the winter cold.
Only heat conducts,
How do the houses look at night? Inverse to what they look, when the sun is burning?
Why did I watch this all the way through? I don't even build houses...
Because knowing this makes you a better conversationalist with other people. One time at an office party a small group of men stopped me and asked a house building question and I knew the correct answer (go girls). I am very girly , never would build a house but love learning. 🤔🤗
Randall Rodriguez ... because it was interesting
learn something, dude!!!! don't be lazy and start shedding those pounds!!!
@@Edmund_Mallory_Hardgrove AI isn't real
@@juliherron8991 You go, (girly) Girl! Looks can only take you so far, but a girl/woman with an interest in, and curiosity of, many things can make life a pleasure to be with -- for decades!
i am a builder also and although I have not done this I have seen many houses built with 2x4(r13) walls with 2 inches( r10) of insulating rigid foam on the exterior walls thus greatly reducing thermal bridging and is very economical. In my area I use 24 oc and 1 inch of foam under synthetic stucco.
This was super cool, loving the technology also loving the old technology of the dowels. Totally awesome and that guy is a genius literally. :)
*Great invention.* It's like the insulated concrete panel sandwich that the northern counties use for construction. Such nice modules will make housing more comfortable and more affordable to maintain. We can be happy about that !
EXACTLY...SAME CONCEPT..NOTHING NEW
SAME AS DOUBLE WALL CONCEPT..
Welcome to my neighborhood, Matt. It was a real treat to see you up in Elk River, right where I grew up. Come to Minnesota more often!
Yeah, Matt! Come back anytime and show us how to keep warm in -40F winters! (Roseville, represent!)
@420 Friendly As someone not from Roseville would say. LOL
Lumber is so expensive right now, can't imagine what these would cost. Although, they do offer more for energy efficiency. Tough call if your trying to build now and have a tight budget.
This is the second time I've seen the video and definitely want to explore this option when I next build!
In 1986 my dad built our house using 2x8 top and bottom plates in the exterior walls. We then staggered 2x4 studs 16" OC with r13 insulation.
Excellent thinking! And, It's a cheaper way to achieve the same effect as these high-tech studs.
Awesome product! It was good to see you and Erik Cortina form Texas Barndos swapping experience. Both of y’all have a high level of perfection and it shows in your builds.
Great innovation, and you did an excellent job covering it. Thanks.
This one of the coolest things I've seen in framing. Super cool! Thanks for the video:)
These also exist in Norway! My house has a grand total of 4 of these closed cell foam studs, and 10 inch thick closed cell walls built between a top and a bottom plate of the same kind of insulated stud. Super awesome stuff! 👏👍
EXACTLY...NOT A NEW CONCEPT
Can you please post or PM me the company the name? I'm curious about what you are using over there and would like to look at their products. Thanks!
The inventor was pure business right up until the 2x8, then went street in his excitement.
One of the best replies on here. lol
That was sick
I am just a curious viewer from the San Francisco Bay Area. Matt I just,... I really like what I learn from your channel. No need to reply, just know you educate so many men and women with great information and with great energy. Thanks my friend.
Amazing product! Love how strong it is too for seismic
Thank you for bringing this technology to light! So thrilling to see the pace of innovation accelerating!
$$$
It will be cheaper as wood costs rise. Which is exactly what the real goal of these are.
I have literally fantasized about a framing system like this, and I’m very happy someone is making it a reality!
I appreciate your innovative discoveries 👍🏻 It WILL be included on my next build.. (Small, I will be making my own)
Very interesting. My husband and I are looking at house plans and the T Studs will definitely be look at closely now
I am impressed with the strength of these TStuds. Interesting.
Matt, thanks for posting, that was one of the coolest videos I have seen on here!!!
Amazing! Wow... thanks for letting us know...
You've renewed my faith in the possibility of building a stick built house rather than going ICF.
Excellent invention. You do a great job presenting it, showing us how it's used, and giving lots of great specs.
Now that is a brilliant product. Thermally breaking studs while making them 4x stronger... whew!
Yes, but isolation should always be companied with an cost/benefit analysis. Probably not mention because it is a sponsored video. This is NOT a new technology (outside US). In my country it is only used as an last option because of price. :)
Håkon Håkonsen They mentioned the cost difference in the video. $1500 more on the average 2500 SQFT house and $5000 on a larger more complex house. That’s change for a house you’d plan to live in 20-30 years.
@@JsGarage I've been a builder for 3 decades; I bet a million dollars, I could take you into a house framed with those crazy studs and insulated and a normally insulated house and you wouldn't note a difference...The insulation advantage is negligible, if at all...Everyone wants to reinvent the wheel...On the east coast we have 3 cold months and 3 hot...meh...2X4 or 6's worked fine for decades...
godbluffvdgg For the price difference especially as I said over 20-30 years I’ll take the new shit thanks though. Along with it comes a stronger construction. I think trying to notice something from a simple walk through is the issue as well. These will be something that is appreciated over the life of the home.
godbluffvdgg Not sure what east coast states you’re talking about but we have a couple cold months and 5 maybe 6 months that usually require AC where I live. There is plenty of room to improve on home insulation.
Amazing. Thanks for bringing this to my attention.
That looks awesome. Good idea for my next house.
Love the idea, but would love to see some real world testing and effectiveness.
This is the building technology I'm all about. Great stuff!
This why Matt is the best....good info !
This is a very informative video…Matt your great…..thanks for bringing it to us.
As a finish carpenter in always looking a products like this. What he needs to do is get it into Lowe’s or Home Depot. That’s what will change the industry first! Drive costs down and save us all.
But he mighg only be able to make a 500 thousand a year their going to want millions always gonna be outa stock hes gota grow first
Lowes and home depot? No one should build a house out of a box store... higher prices in bulk and limited length availability Gotta get it into lumber yards
@@michaelbarrella3043 higher prices in bulk? Thats the opposite lol
@@jordanlittle5391 They have higher bulk prices.. Did I really need to correct that? Lol
@@michaelbarrella3043 not here they dont lol more u buy more u save contractors also get 10% off sticker
You make excellent videos. You use a lot of industry terms, but that's the point. You're making these for the industry crowd but they hold the attention of general public viewers. That's not easy to do. Congratulations
Amazing stuff! Great product
I'm sold! That's amazing!
This is one of the coolest products you’ve demoed.
Matt, cool video thanks for sharing. Being a Canadian and now living in Houston I cant understand why some of the houses are so poorly insulated. Unreal!!!!
I'm the exact same. I grew up in northern BC and Houston homes baffle me. 2x4 studs and a bedsheet for insulation and they wonder why the electric bill is $600 in the summer.
What a time to be alive!
About time I see a product like this. I've thought about the same thing and many other similar ideas, decades ago. Great product, long overdue. Also, noticed another detail here that has multiple advantages, the vertical sheathing as opposed to horizontal.
This product reminded me that I too have not only thought of the same thing, but many other similar ideas, decades ago.
@@sethfoster4535I thought of this over 1,000 years ago in a past life....then rethought of it when I was 12, forgot about it, then remembered rethinking of it 10 minutes before watching this video. Coincidence? I think not!
Nice! Been waiting for something like this!!
If framing a shipping container, this definitely looks like a great option on so many levels. Thanks for the great information.
I have always been curious. Why are you building a shipping container house? It seems like a pain in the butt to build in such narrow structures and putting holes for windows seem like they would be tough to seal/frame out. Also when framing since the framing would just be for drywall hanging, wouldn't you be better off framing with something like 2x3 or 2x2 spaced off the wall a bit insulating behind?
Very interesting! This is definitely the way to go. Just think of all the energy savings and time saved.
this is a cool product, I will consider this on my next build. I wonder if they're working on an LVL replacement for carrying heavier loads (as apposed to using the studs on gabled walls).
You should get this over to the Hydraulic Channel (KZhead) and test their strength in comparison to regular 2" x 6" studs!
T-studs website has that data.
@@6milesup yes but seeing 3rd party data unrelated to the manufacturer whould be good to see
@@MFCSTUDIOS It is independent testing done by a lab in Madison, WI. Not trying to defend T-studs but all the data is there including letters of certification.
earthly firefly5 is this all you do is rip off quotes and paste them randomly on KZhead? Must not have a life at all!!
earthly firefly5 haha ok 👌 I will continue living what I believe my life is and will be and you just continue quoting random crap and being you
Absolutely amazing great video and information
Thanks for the idea. I'm pretty sure I could make these to use in my off-grid pad
nice system, not only insulated but perfectly straight and flat. These would be a dream to work with.
Except the part where you're dealing with a 2.5" thick stud so building in general is going to be a nightmare. You can no longer use a framing nailer, you're stuck hand screwing, meaning it's way more expensive and way more time consuming. With so much less wood there, a split is going to be a stud ruining event. So you've got to walk around pre drilling everything driving long expensive screws.
Perfect timing! I am specking out a complete Cottage rebuild and really hope availability isn’t going to be an issue.
Great product. Go big and use the bigger one (8"), Rockwool, 24" on center. Never ever use treated wood, not even on sylls. With the wider wood u can now mount the drywall vertical like we do in europe.
@@72strand , why not use treated wood, at least for the sills? Fastener corrosion?
Ok, so where i live. We don't use treated for sills. We know that concrete is wet, but not that wet. It is moist. If you put wood on concrete the wood sucks the moist from the concrete and over time, If the wood cant dry fast, you get mold. In old leaky houses that was no problem. In new houses it is. Treated wood sucks moist the same way normal wood does. The only difference is that the treated wood don't care if it have water. It will not start to degrade. Not only that. Wood above the sill, will start to suck water from the treated sill to. When the treated sill gets water, it will start to smell. And some say the off gases are bad for your health. So, what to do? Here we use a sill paper/rubber under the sill. As a seal from concrete to wood (sill). That way you break the direct contact wood/concrete. The concrete will have to dry to the sides. And the wood is protected from the moist concrete.
Nice "innovation", we have had these here in Finland at least 50+ years... :)
LOL. No kidding. My dad (registered architect) and I framed using our own thermal break members in the '60's here in the US.
Well, when you have your balmy winters, you have to innovate. Or should I say... Finnovate.
@@vincenttavani6380 yesterday -26 degree celcius...very balmy indeed :) when writing this its only -12 so i can go out without hat :) this years record here in SOUTHERN finland -34.7 celcius
@@jkarra2334 Honestly you all just have to migrate South. We need not fight wars over the land anymore - 34.7 is hellish, if hell used cold instead of heat for the torture! Man, I have incredible respect for people living in Northern climes. I do wonder though how many would remain if they learned of ''the bus south" :-P
MAGA, lmao
That stuff looks amazing.
Wider flange for plywood/sheetrock, wiring/plumbing is much easier, better heat/cooling retention, 4x's as strong and the list goes on. Only 1500 more for a 2500 square ft house, sounds like this guy is on to something here !
Definitely!
Won't be long before competitors move in to Jack up the price, or builders charging a midleman premium.
But wont the cost of drywall jump having to use 5/8s everywhere?
don't think the electrician is going to give you a price break
What sells me is the straightness compared to the lumber I can buy locally, and being able to use less expensive internal bat insulation instead of exterior foam board. Living in a part of Canada where the national retailers gouge us for crap lumber with a 30+% defect rate AND with low shipping costs from Minnesota, I can see this catching on with the custom builders. They already use a lot of engineered lumber products. The whole-subdivision builders still seem to think insulation is a communist plot.
Awesome! How about IR footage of heated homes (one T-Stud, one solid studs) in January? Hot Chocolate!
I was hoping to see this, like he did with that other house he built. Really fascinating perspective.
I too think some IR imagery comparing Tstud to conventional would be a great confirmation of the concept
IR footage: black screen probably
very much need this!
Right on. Prove it.
Interesting idea. Great video Matt.
Neat concept. I will need to investigate but I have not heard of this product until watching this video.
Hey Matt, your videos are on point, I would think the open stud with blow bib might be interesting. Thanks Pete
It wont give as high of an r value with dense packed fiberglass or cellulose inbetween the studs. But it would still be far better then regular framing!
Very interesting. I look forward to hearing about how they perform over time and in different climates.
alex banks I’m skeptical, everyone else in here seams to think this is a miracle yet when I search it to see if it’s been tested by the industry where they run all sorts of tests , can’t find it . Do you really think that there is as much of a difference in r value as they are saying or weather it really makes much of a difference ? One top plate , 24 inch centers , man I don’t know about this , also what about. In areas where your not allowed to do 24 centers and stuff . For me there is way to many un answered questions
Stephen Lee I agree that’s why I would like to see. What’s said about it and how it stands up to the test of time.
Excellent video, Matt!
Matt, Tstuds do offer an interesting thermal benefit. Class A fire resistance is reasonable. How about toxicity of combustion products. Thanks for covering this system.
Yeah, usually that foam insulation stuff is nothing but highly combustible kindling. Don't know that I'd want to go that route. Doesn't take much to light that stuff on fire vs trying to light a 2 x 4 stud on fire.
@@woodrowmagnus2535 Fortunately that doesn't apply to this product.
Wow I'm sold. For that extra delta cost you are getting so much more! Awesome tech.
he didnt even mention the cost tho
@@michaeljones5068 He did say on the average house in North America (2500 sq ft), it would add $1000-$1500. But I imagine the energy savings (and possibly labour due to the reduced weight) should more than offset that extra cost.
@@michaeljones5068 14:25 to 14:55 he mentions the extra cost to compare, actual pricing per piece will depend on volume of order per what sizes you request and your delivery location and any added delivery requirements.
@@davidslinn5920 Not to mention, l less or no drilling for the rough electrical and top out plumbing.
For a very cold climates normally framed with 2x6's for thick insulation... seems like a good investment.
I love me some great R-Value! Some people go for the aesthetic’s, I go for the structure and comfort. I know what I’m going to be using to build my micro home.
go min 12x24 i went 12x16 with an upstairs with 12/14 pitch so u can stand and almost everyday i cry a little
wicked awesome!!! great job !!!
In 1980 I started building houses with a 8" dble studded wall. Studs on 24" centers- both inner wall and outer, Advanced framing on structural outer wall. This is an improvement to 2x6 but not as good as dbl studded
Doesn't that cost a lot more than the t-stud method?
@@jrbisc99 I suspect that the Dbl stud done with advanced framing is close to the 2x6 T-stud framing cost, particularly how the framing is done in video. My system has 27-28 R value through whole house with exception of headers which will be a little less. If I were building houses now I would look real close at the 2x8 T-stud system as a being better than my old DBL 2x4 wall . One reason is I suspect that the T-studs have fewer defective/ crooked studs so less waste. I would want my walls to approach R 30. Header details for load bearing walls would need some thinking on
That's really a good deal. The efficiency you gain will pay for itself in durability and energy savings quite well. I was expecting a lot bigger price difference. Thanks for sharing this, Matt.
2x3s are pretty cheap and once you make a machine to do the doweling, it shouldn't cost too much. I just wonder what adhesive they use on the dowels.
@@nicodemus7784 Matt said it's a polyurethane glue on his Instagram IIRC.
@GS thx. wonder how well that stuff holds up over the years.
Many of the modern siding products call for a 16 inch center nailing pattern for their warranty requirements . Excellent product for the northern climates to be sure regardless .
@@jamesooten3659 I agree.
There have been steel framing studs made in this style for at least 35 years. My dad built a house in Austin Tx back in 1985 with foam block exterior walls and framed with these truss style 2x steel wall studs, floor joists and roof trusses... great fire discount on homeowner insurance!!!
So when you really need to anchor something to your wall, your only screwing into a 2x3, just brilliant.
ClubMayview a 2x3 that’s a truss held by what look like substantial dowels and rigid foam. It’s essentially a 3x6
So good. Need this in Australia ASAP
Andrew Story Won't happen any time soon, you are just starting to see UPVC Doubled glazed windows becoming popular, this would blow peoples mind. lol
Start your own company 😉
I dream of R30 walls! But most contractors think that’s ridiculous waste, won’t do it. Some of the ridiculous responses from SO many contractors, lead me to think there’s NO education happening in industry, beyond a very few. The Olympia, WA region (including at least 4 counties nearby), seems glutted by shady or ignorant contractors of every kind. Not only do they propose inefficient options clouded with promises of rebates many can’t access, but try to dissuade owners from installing good options (like a metal roof). Ask for R60 attic insulation, they stop @ R40, if that. Don’t get me started on repair contractors..eeesh! It’s so refreshing to see innovative, good use of tech, & demos that help make good sense of it.
I don't get it, hell don't really believe it. Customer wants a better more costly (labor/material cost) material, simply up the price. Sure give an opinion, but customer gets what they pay for.
Cool I'm glad I found this video. Need to open up the door space to except a 80 1/8 RO I could use Tstud for the header
I always learn something when watching Matt. Unfortunately I am not building a house otherwise he'd be the first guy I would call here in Austin.
When I worked for a spray foam company here in Bluffton, SC, I actually designed something like this in the field. It is so awesome to see a person actually have the funds to produce it!!!
I had this idea 20 years ago. I knew it would come out eventually.
Ideas don't matter. Funding matters. That's why I stopped giving a shit about anything years ago.
Fun fact, in the late 50's all the way up to the late 60's and even into the 70's they built a lot of walk in coolers with wood framing and wood paneling before they figured out much more efficient solutions.
unreal news to hear! pretty cool Matt.
Thank you for the video, this is perfect for the pre-fab housing.
Wow a couple of 2x2's with some foam in between.. How sturdy! 👍
he said they were 2x3's but the measurement showed 2x2.5, i feel like you are sacrificing load bearing for increased insulation. I guess it depends on situation. I personally am opting out of a lot of wood material. Brick houses last forever and have great insulation values.
tiny house builders will love this...
Good to see this has been developed. When I built my house in 1986 I did a similar thing that saved tons on my heating bill. I had the package framed with 2x4 on 16 centres, then added a 1.5" wide strip of 1.5" thick foil-coated styro (R 10.9) to all inside stud, sill and plate surfaces on all exterior walls. That gave me the same depth as 2x6 framing and room for R20 in the wall cavity. Total cost -- around $400 and a few 3" roofing nails! I contemplated patenting the idea, but never did -- sadly! Some said there would be a problem with nail-pops in the drywall, but there never was. Used 3" gyproc screws throughout. The t-stud method will surely cost a lot more than regular studs, but likely still a good idea.
Hey know how to fix nail pops??? glue the sheets! like everywhere else in the world. Sadly Americans are very behind the times
I feel like I just saw the future right here. Great innovative design.
Did you fast forward the video to the end?
wow, I'm sold. This is a game changer. Well done Brian!
Wow that's a super game changer in electrical data jobs
Really think this is a great innovation. All other new building products that try to eliminate the thermal bridges have their downsides, such as SIPs that are terrible if you need to make changes to your house after construction is finished. This product really combines the flexibility of framing with good energy performance.