Smart Fortwo 450 not staring. 9 times blinking. Key teach-in procedure.
2017 ж. 8 Жел.
419 710 Рет қаралды
Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
This little smart came to me as a non runner, with the horrible 9 times blinking of the hazard lights, and the key in the gear change window on the dash...
Unfortunately there is not a lot you can do to get it started without the correct equipment....
Even Maxisys is not very helpful on this... • MaxiSys MS908P on a 20...
In this video I will take you through the process of re-synchronize the key and get the car started again...
Hope you enjoy the video.
Any questions or comments put them below.
Like always, thank you for watching!
Amazing to watch you going through the sub-menus until you find exactly what you want. Like looking for a needle in a haystack.
Lol Thanks! 👍👍👍
When you turn star on next go back into the search by vehicle type select the correct chassis type, then once that next page comes up asking for specific stuff just push the button at the bottom of the screen that should auto search it all for you, keep the cool videos coming
The button is the blue one which says xentry diagnostics
Matthew Deakin Thank you Matthew, this was the second time I was using this tool... first time was about 1 year ago, someone lend me one so I could do something on a s class... so not really an expert on this tool... yet... lol 😉
Aquela grande satisfação de um trabalho feito, Good job
Francisco Pereira Sem dúvida!... Thank you for watching!
Have a 2006 diesel and love it. Glad I have a retired mechanic specialist in Smart, Mercedes and BMW. Smart costs me $ 15 a week to drive to work.
They are indeed nice little cars! 😊 Thank you for watching and for your comment!
very very nice .you are always my teacher
abderrahim amroune Lol Thank you for watching!
One of the clearest vids I come across!!! Thanx
☺️ 👍👍👍
great vid and liking the new tool. look forward to seeing you use it in the future
Mark Eastwood Thank you for watching!
Where are you I'm in bend Oregon Redmond not bend please call me I need help this car makes me want to kill myself I have 5,000 into this poorly put together joke of a car when it did start the heater doesn't work very well and I freeze in it I can't sell it iid feel to badly for who ended up with it it's not right
I am on the other side of the pond...☺️ 👍👍👍
@@LMAutoRepairs can you help me with the car starting if needs reprogramming keys there are two
hey buddy you also got the autel diag, it does it very simply also for the 451 i've done it multiple times. great video
Oltian MUNGA Thank you for watching! On the 451... on the 450 would not do it... at least with the software version at the time... (tool was up-to-date anyway...)
VERY WELL DONE THANKS FOR ALL. THAT YOU DO FOR US
Hanif Abbasi Thank you for watching and for your comment!
If it is the original key on any Mercedes Benz product the easy solution is as follows: Disconnect battery in car, remove battery from key, reinstall key battery, reinstall car battery, lock and unlock door with key(not button) then start car.... This works on all Mercedes
Would not work on this one... The Immo is deactivated with the remote, as I have explained in the video... But thank you for watching and for your comment!
my 09 smart has no key holes on outside of car
At first I thought you were kidding, but I tried it anyway. Unfortunately, nothing happened when I tried it. I have a new car battery and a new key battery. Could AAA have done something to it when they replaced the battery? Is there some way I could check? I had heard about the ground wire or something like that, but I really don't know what I'm looking for. I asked the man at the garage I've been to in the past, and he was no help. What should I do? I don't have a lot of money to take it to the dealer. Thank you
super work again mate
Paul Mayou Thanks!
Hi, i have problem where the key needs programming everytime i try start the car, as soon as you switch ignition off it loses all stored keys, any ideas?
Just got emergency phone call with same problem and found your video. But have only IM508 onboard. Fingers crossed!
🤞 Never tried with the IM... Will be great to know if it does it... 👍👍👍
@@LMAutoRepairs Job done in 15mins by Obdstar, but I am sure IM508 covers it. Regards!
👍👍👍
Mate thank you so much of sharing your knowledge i never owned a smart still interesting to watch
Albert Ara Hi Thank you so much for watching and for your comment, much appreciated!
Why there are so many downvotes? I think its very helpful video so please tell me why so many ppl gave downvote.
☺️
Cool 😎 cheers from Portugal 🇵🇹
Obrigado! Thanks! For watching and for your comment! 👍👍👍
My 2004 plate 450 doesn't start sometimes it's really frustrating, the box in the middle dash board is clear when turning the key numerous of times, only after 10-20min or so the car will start displaying Netrurel any ideas on what the issue would be??
THANK YOU SO MUCH FOR THIS VIDEO MY DUDE
☺️ 👍👍👍
Thanks for the video but just one question will this unit also program the earlier model Zee controller as have the same problem but my one has a Zee controller not the Sam controller Cheers Steve
m6gt Hi This tool is the same as the OEM... used by Mercedes themselves... so yes it does the zee units... Thank you for watching!
So the maxisys ms908 is not used to program the smart key? . you failed to make the maxisys unlock the car key? I have the same problem, so I need to get the C4 from mercedez
hey leo nice job like always very informative video but i'm wondering from where you get all you information about how things works thank you
Reading, experience... etc... Some are also common sense... not in this case, but some are... Lol Thank you for watching and for your comment!
I'm stuck on a highway with this problem going on, so i came here for this vid
😬 Hope get home safe, and can get it resolved... 🤞
The airflow meter on smart car pulse where can i get one?
Thanks, god bless you!
👍👍👍
Hey there, hopefully you still receieve notifications on this. I just now have a similar problem. Immobilizer is not disengaging, doors opening while using the 'rear entry' though. Keyfob remote does not work at all. I'm not getting a 9x Flash of either the harzards or the brakes, neither the clicking sound. I got my spare key aswell, exact same issue. Now.. it's either the Receiving unit fucking up (due to desync, possibly, though I basically drove half an hour, then got out and locked the car, beeing away barely 5 minutes until the issue) Or BOTH fobs batteries are dead (probably more likely since I've had the issue where my car wouldnt lock properly ONCE and that resolved itself after pressing a few more times.. that was months ago tho) Though I always keep my keys in my front pocket, there's barely a possibility of the keys beeing pressed, let alone 100 times or however many times SAM/whatever pre-calculates codes.. I'll be going to my dealership tomorrow (luckily right around the corner) and get new batteries (all shops were closed at this time) plus maybe will need to get the car towed and keys reprogrammed. Hopefully that'll fix everything.
Oh, and all the electronics are working. (Just to prove dead battery assumptions wrong.)
I hope you get it sorted... Let me know how it goes at the dealer... Thank you for watching!
Yeah, I got it sorted out quite quickly. My main key ran out of battery, the spare aswell. Now I did try around with my main key, that's why it ran out of sync, while I just put new batteries from my trusty 'specialists' into both, and they reprogrammed my main key. I did try manually reprogramming with the different button combinations etc, but none of those worked. (My spare was still in sync, so all it cost me was the reprogramming and 2 new batteries, basically 50 bucks with the minor inconvenience of noticing when shops had already closed and leaving the car with my dealership for an hour the following day.)
MaxiIm608 is able to reprogram the remote control. Maxi Sys Elite didn't make it. Today I did. :)
☺️ 👍👍👍
Verry helpfull, i learn a lot from this video. Thank you verry much . So, if my kid plays with the key and touch the button more then 7 time,s Your screwt
☺️ Pretty much...🤪 👍👍👍
TREMENDOUS! I’ve got a job for you!
Successfully progrmed with delphi clone... Tried few times with 2016 version, successfully done with 2015.. Few times got remote working but not starting
Hi Mate, thanks for the vid. I have the same problem on my car, it wont start. Was wondering if your located in London, if so, can you sort mine out? Or can you recommend someone?
No... not near London... Thank you for watching and for your comment!
I have 2006 450 which does acknowledge sync with SAM and Key. All indications show key code is being accepted. Problem is when the ignition is turned to start, and gear shift placed in Neutral, the dash display indicates gearbox is in Park. The dash will not indicate Neutral but stays in Park regardless of shifter position. . of course the vehicle does not start. Any suggestion from seeing this problem before?
put foot on brake before moving gearshift
Hello my friend,ive seen some other functions in your video like cruising control.Can we unlock some hidden functions in 450?I know that other cars are able to do so,so i was wondering if its possible for this car too.
You can... but on this one don't think there is many hidden functions... Is more like coding and retrofit... 👍
@@LMAutoRepairs I have 450 600cc cabrio,what i want to do mostly is the auto locking the doors after it starts moving.Is this one possible?
@@woofaki5550 No sure if that is in the body control module options... do you know someone with a star that can connect it and see what are the options available?
Hi thank you for the video, we have a 1999 passion Had some one out with a star machine was not able to reset the code, saying the SAM is faulty comments or recomendations please
Possibly... Difficult to say without actually looking, or have a bit more info... Could the machine communicate with the sam? What codes were set in there? What is the exact issue with the car? Thank you for watching!
Thanks for info. Luckily I had spare key and made one out of 2 by swapping chips and battery. Thanks
Can you tell me how you made one key out of 2? As I have 2 smart key from another smart car.
Thanks for sharing
☺️ Thank you for watching!
Hey, could you confirm what cable/connection you used with your MB star? I’m guessing the 16pin obd? Got my SAM donor working with your other video!
I used the Star interface... 👍👍👍
@@LMAutoRepairs my one comes with about 7 cables. The only one I recognize is the obd
Yes... the OBD16... 👍
Wonder if could do used 06 smart car key?
Follow up.. Might this indicate a problem with the Relay for automated gearbox, SE Drive unit?
Hi Have you scanned the car, and looked at the live data? Perhaps the gears actuator or clutch actuator... just guessing here... Scann it and go from there... Thank you for watching!
Im sure your aware the SAM unit suffers from water ingress on that particular model of Smart. I to need Star, any recommendations ? Another quality video, definitely one of the best technical channels on KZhead. 👍
wardybasher Hi Yes I do know about the water issue... For a long time the star was on my wish list... until I got this car and because the MaxiSys couldn't do it, I decide was time to get one... I got it on eBay, but the seller also has its own website... look for a seller with a good feedback and that inspires trust... I also got 12 months warranty!
lmsvvavr Appreciate your prompt reply, I’ll have a look as you suggested.
wardybasher No worries! Thank you for watching!
While the key test procedure, where is the Key? Do i need to insert the key?
Does this happen with the 451??
Good job
Thanks! 👍👍👍
I have same issue who should I take my car to to reprogram the key thanks for help in advance
Hi Dealer will be able to it... Thank you for watching!
different question. How can i switch between mielage and fuel consumption on dashboard? Thnx for any answer 🤗
h4swell If remember correctly, there is a button on the outer side of the cluster... as you press it, it will cycle through all the options... Thank you for watching!
Hello mate can I ask you I have a 451 fortwo and does not go in reverse is that N flashing on I checked the actuator is fine I don’t know what it is do you have any ideas
Saiz Mădălina Hi Have you scanned the car? That might point you in the right direction... Does it goes on forward gears? Thank you for watching!
Hello
thanks for great video, i have Smart 2014 451 all key lost and i tried programmed new key with AUTEL IM508 only remote work , however matching process saying successful but car not starting and that key sing on dash ...can you please advise ...thanks
I think you need to initialize the key... or something along those lines...
Read the Fault code, maybe the key receiver is broke
Hi I have the same problem with my 450 fortwo. I called locksmith and he says he cannot find a transponder signal and telling me that my key does not have (or lost) transponder and thats why it does not work. So my question is.. did this key really lost a transponder or could it be that locksmiths machine cannot detect this particular key's transponder? And also, If I order in a set of new keys, do you think he program this key? (He said he does not have a star machine though) He said its easy but I am a bit worried since it looks like it does not work with some machines as you say. Or should I just find someone who has a star machine? Thank you very much for the video though :)
Hi If you watched the entire video, you would see that I have explained that this key does not have a transponder.... Star obviously will re-syncronise the key, but it might be other tools out there capable of that... I would find someone with a star or with the correct knowledge and equipment.... Thank you for watching and for your comment!
Hi LM, if you had a completely faulty Sam unit that was unrepairable, do you know the procedure to replace it with a used one ?
Either clone it, or with star... Thank you for watching!
@@LMAutoRepairs Hi that's basically what I'm asking you, how do i clone it? is all the information needed on one chip / MCU or on lots of different ones? what programmer should I use? Or to put it another way, if you were doing one what tools / software would you get out ? Would you do a video ?
All info will be in the MCU and eeprom... depending on the model... Use any tool capable of reading and writing the particular MCU and/or eeprom... X-prog is a good option...
@@LMAutoRepairs do you think a Chinese xprog is ok? I have seen genuine for £1100 for a basic one and Chinese for as little as £55? Plus loads inbetween its a minefield! I have not seen one that looks like your one though...
No... my one a quite old version... you find newer ones out there now... Yes a clone one should do the job just fine...
can you please tell me what you are using to connect the laptop to the car? is it a MB Multiplexer? is it just a generic data cable? im getting quotes north of $1500 for 2 keys for my 450
Jason K Hi I am using the MB multiplexer... That sounds a bit too much money for two keys... even at the dealer... Thank you for watching!
Are these things available used? I only need it to program 2 keys. I shopped around and got 2 different people willing to do it for $1,000 for 2 keys. I can find the software online for free, I just don't know where to get the multiplexer cable.
Jason K Hi The keys cost (here in the UK...), about £70 each... And I am sure that any independent garage or Mercedes specialists will not charge all that to program it... You can get the multiplexer for less than 500... eBay is a good place to start... Or look here www.cardiagtool.co.uk Hope that helps...
It’s good you weren’t sure because most of us aren’t and make the same mistakes but it’s all good
😊 And we learn... Nice to see that the message gets across! 👍👍👍 Thank you for watching and for your comment!
Iv got a fiat 500 I would like you to have a look at...
Thanks for the Information but the last step which you skipped in the video didnt worked :( I should enter a code but where do i get this code from??
Hi I have not skipped any steps if I recall correctly... nor any code has been asked... Not sure what you are referring to... Thank you for watching!
感謝分享的說，馬上按個讚的說
夕垌凼姬 You 're probably correct... Thank you for watching!
am facing the same problem so how am i going to get rid of it
i have a smart forfour ... the key is unlocking the door just fine but i cant start my car because there is a displayed on my dash .. What should i do..please help
Hi You mean the is an "A" on the dash?
Genius
AstroBoy yo Thanks...😉
Hi everyone and especially to Louis. I had a Smart Fortwo 450 today in an AKL scenario. This particular car came from Japan and when I tried to program a key, the SAM unit did not accept the key even though the diagnostic tool told me that adaptation was successful. After that I thought that I didn't had the right keys as I have a European key with 433 MHz. I know Japanese cars come with 315 MHz remote but the think is I searched everywhere for a 315 MHz key and they do NOT exist. *Has anybody came across anything like this?*
Do I need a MB star scanner to program an additional key
Hi Not necessarily... there is plenty of other tools out there capable of that... Thank you for watching!
@@LMAutoRepairs can you please tell me if a tool that will program a 450 Smartcar key for immobilizer and remote locking
@@worthyo There is many out there... All depends how much you want to spend... Obviously the one I am using in this video being one of them... Thank you for watching!
HELLO This key is original or not ! i mean if i want to use a virgin key as a 2nd key ! (instruction
i-Bird Hi This was the original key which just lost synchronisation with the sam... To program a blank key, the procedure is slightly different...
Does anyone know what the little screw driver sign means that keeps flashing on the dashboard ? I alsways see it when i start my car
Callher C Hi that's the service light. If you look carefully, while that is flashing, under the gear change window a number comes up... in this one -89 or something like that... that means that the service is overdue by 89 miles... ( I am 99.9% sure that that is miles...) Thank you for watching!
LM Auto Repairs I believe it’s days it’s overdue by. Thanks
Thank you very much, I have an issue with the car now and please you may help me it's smart 2002. I was driving and the ABS and hand brake and the sign ! is all on together and the speed kilometer fell down to 0 but still I could drive and gear was fine. then when I stopped and made the gear on N and try to put it again on A or R I couldn't not, but then the lights went off. Please can you help me with a solution.
Now the ABS light is not there anymore but I am afraid it will come back any time :( please help
Majed Bahabry Have the car scanned to see what is in there, the codes might give you some guidance...
I don't have a scanner and workshops in of Smart is 100 KM from here , thank you for your reply, but it's gone now but I am afraid it will come back.
Majed Bahabry Any garage with a diagnostics machine will be able to scan it and give you the report of the trouble codes...
I sent it to the garage and still waiting for the result bro :) thank you so much, where are you from?
Hi i have same car & same problem..a friend bought his diagnostic machine over, plugged it in..the key icon is on the dash..he entered vin no & followed wat it said to do & it said it was done & nothing changed..??
Try again, is so tricky when teach in key . Sometimes the results really successful sometimes is not
Boas. O meu smart fortwo de 2000, quando carrego unlock ele só fecha o carro. Quando carrego lock o botão não funciona. Será que a chave precisa de programação?
Boas... Não me parece... já que um dos botões funciona... Parece mais ser um problema na chave... 👍👍👍
Hi are you using mb star c3 or c4? And btw both works right? thanks
ArvinSan25 Hi C4... both will do it... Thank you for watching!
Thanks. Btw i have a random question. My smart 450 vibrates everytime i turned on the a/c and when i run it feels okay but when i slow down the car's engine vibrates and i also think that my gear shifts a little bit late than it used to. I also tried running it with the a/c off it runs actually good and fast but still i can feel the shifting is a bit rough and late. Do you think the problem is just the clutch? i already change the spark plugs so i dont really know whats causing it to vibrate
ArvinSan25 Turning the AC on pulls extra load from the engine, but this should increase the idling rpms to compensate... unless something is wrong with your AC pump... is the AC working ok?
Yes ac works fine and its cold. And your right it should increase the rpm but mine dont do that if i dont put gas when turning the ac on my engine shakes and when i let go of the gas the engine shakes. But before all of this happen. I let someone fix the car since the ac of my car sucks when i bought it. Im suspecting the mechanic guy might have change my ac compressor to a bigger one that makes heavier load on engine right? i havent check it though .Our country dont really have a smart dealership and a 600cc cars so he might have change it. So the problem right now is either the ac compressor or ac pump? i really dont know tbh but still im using the car even though it shakes
ArvinSan25 When I said pump I meant compressor... sorry... That's a possibility... but not really sure... you need to ask him... I am not sure if you can increase the rpms when the AC is turned on using star... but probably you can... that would be a good solution...
why not use AUTEL and what, the name of key programming tool you are using
Ahmed Abd elbaky You haven't watched the entire video, have you? Search for Mercedes Star....
Where did you buy the star machine from
Hi If I recall correctly, eBay... Thank you for watching!
Como só tenho uma chave se calhar tenho de fazer outra e a nova placa da chave ser programada com o carro. Obrigado desde já pela resposta 💪🏻💪🏻
Que se hace cuando la llave no entra ?
Phew! Get to the end ok?!
just use your mouse lol, the least tech savy part of the whole process is how to forward the video clip
what could be problem if key teach in successfully center locking works but dont let to start engine ?
Edvinas J. 🤔 Look at the live data and codes... It should work, providing this was your problem... unless you have another problem elsewhere... Thank you for watching!
I dotn get any codes this is problem. May be it reached 4 keys limit? how to delete other lost keys ?
Edvinas J. Which tool are you using?
mercedes star c4, only wrong thing I can see that immobilizer not disarmed in engine live data when I try so start engine.
Edvinas J. Ok But is the car actually recognizing the key? Well I guess it is if is open and closing the doors... With c4 you should be able to delete all the keys and start again...
Hi my key wasn't working i replace the battery but now still not working, any ideas?
Chrisis Alkiviades I thought I have explained it quite well in the video... If you have the 9 times blinking then your key need re-syncronise... If not, you need to check first that the key is actually transmitting... Hope that helps...
Als dit probleem zich voordoet druk opnieuw op de deursluitknop en terug op de opendeurknop en de auto zal starten. ik had vroeger dezelfde Smart en heb dat probleem ook meegemaakt. Het is dus geen defect aan de auto het is omdat je te lang gewacht hebt voor te starten en dan gaat de startmode in beveiligde stand en kan je dus de motor niet starten.
This happened on mine. The 9 flashing was telling me that the key battery needs replacement.
John Hi That's the "good" 9 times flashing... Surely in your case you were still able to unlock the car and start the engine... In this video is the not so good 9 times flashing, where replace the battery will not resolve the issue... Thank you for watching!
@@LMAutoRepairs What if there is no flashing at all just goes bad, works if I use a hot fan to heat up the electronics inside the remote and that's like once then it dies again how bad is that
@@LMAutoRepairs it better be batteries
@@birdisthezv Sounds like dry solder points on the remote... Thank you for watching?
@@birdisthezv Well, I thought you would have done the basics already... like check the batteries... 😉
Hello. I have smart roadster 452. I found a locksmith here who have mb star diagnostic. The car I parked in my garage locked for 2 weeks. And when I unlocked the doors the fob not responding. It took the car to locksmith and he is able to unlock the car from the mb star but still the key fob not working. No lock / unlock / trunk button working. Any guess what should I check?
Key fob batteries checked. I have 2 sets of key fob. Both not working.
Might be the car... Star should pick up the problem... 👍👍👍
Do you have a key reader relay?. It's inside the centre console underneath the handbrake
Can't remember now... this car was not mine... but indeed some do have...
@@LMAutoRepairs smart fortwo and Roadster key reader are same
What is the best way to go about fixing this? Buy the electronics myself or tow the car to someone who can fix this?
Hi Tow the car is your best option... start is a bit expensive... Or kzhead.info/sun/aK6lj9SnfWVrknk/bejne.html Myself or a fellow member, will be more than happy to help! Thank you for watching!
Hi, do you have a garage in the UK? I have the same problem on my Smart 451.
No... I am just a car enthusiastic... 👍👍👍
@@LMAutoRepairs that's a shame. You would make a killing! Thanks anyway 😊
@fe9143 ☺️
@LMAutoRepairs out of curiosity, do you know what could cause this problem? I suspect my mechanic has done something (the car was fine when I dropped it off), but I'm not too sure of the root cause.
@fe9143 I believe one of the causes is like pressing the button when not close to the car... that puts the key out of synchronisation... But could well be other things... 👍👍👍
👍
Thank you for watching!
Can you tell us which year it is too Please? thankyou
The car? It was a 2002 model... 👍
is the process on a roadster the same?
Never done it... but I would guess is very similar... Thank you for watching and for your comment!
Yes,the same way
Hi my smart fortwo key stopped working yesturday.. mine just completely not doing Anything. Mine don't make a Noise or blink 9 times.. the locksmith texted key and said the key is fine. But when you click any button on key it don't do anything at all.
Is that the only key you have? Have you replaced the battery? Thank you for watching!
Yeah i put new Battery in it. And locksmith said the key is fine. He done a Test on it. It was working fine.. then yesturday it stopped working.. only have 1 key
When he done scan and plugged computer into Car it come up.. Description ecm/tcm EOBD2 Services Then Under Value OSO14230. Then next line down said. Ecm/tcm Vin Number. Could Not Read Vin.
@@METALBAILEY Might worth a resync...
So get the Locksmitch To Re Program the key Again. I lost my original key. And Brough one on ebay.. he programmed it and its worked ok for 6 months till Yesturday..
How do you turn of the traction
Has far as I am aware you can't... What you can however, is retrofit a switch to be able to turn it off... I never did it, so not really sure what is involved... but a quick google search should help you... Thank you for watching!
I have the key on my dash and the car makes no sound when trying to start but my key still lock and unlock car. What could be the problem
Same car as on the video? Scan the car if you can, and go from there... Thank you for watching!
@@LMAutoRepairs I don’t have a scan tool but I’m thinking of purchasing one for my smart. Would a $150 icarsoft MBII be good to purchase?
Can't really advise you on that one... As I never used it... I guess might be enough for reading codes etc...
@@LMAutoRepairs thanks for your replies
👍👍👍
My smart is a 450. Locks and unlocks, but not starting... Losing all hope and not know what to do
Hi Have you tried to troubleshoot the problem? Have you scanned the car? Thank you for watching!
Hola buenas noches tengo un smart 2012 le cambiaron empaque de cabeza y ya montamos el motor y no arranca que puedo hacer para arrancarlo
Where are you based ?
Top Tunes Hi Cambridgeshire... Thank you for watching!
I have the same problem :(
Hello there... I have a smart roadster 2004. Need your advice. The key sign is blinking on meter but there is no button on key are working. I programmed the key and it started but when i turned off the engine then key stopped working again and key signs appears again. My technician says it is the key signal relay problem that comes under the handbrake panel. May be it was not passing the signal to the SAM or ECU. What do you suggest?
Hi It is a plausible possibility... Looking at live data etc should help you see what the issue is... Thank you for watching and for your comment!
@@LMAutoRepairs how to send you a live data? Do you have a WhatsApp? I am not in UK or in Europe. I really appreciate if you could give me a hint... Thank you
@@buckleupcanada Have you checked live data, see if the car is receiving the key signal?
@@LMAutoRepairs Here is the video kzhead.info/sun/YMaLlamdbGOYioU/bejne.html
@@LMAutoRepairs If i send you the Key, ECU, speedometer and SAM, would you be able to reprogram it? My friend will give it to you over there.
Hello...... comunication error Ecu... scanner... Help... tank you
Luis Estigarribia Hi Bad module, bad communication line, or scanner.... Thank you for watching!
Thanks to you for the help ... you say that you can be the problem of the Ecu ......
Luis Estigarribia As well... but check all the other stuff first... can you communicate with the other modules in the car?
there is no communication with any module of the car
Have a look at this video... It might help you! kzhead.info/sun/gNqEg8iirX6hooU/bejne.html
This is happening to me and I don’t even know how to fix it? Can you help me
They video explains what to do... There is other tools capable of the procedure... Thank you for watching and for your comment!
Do u have another way ??
Cuz I don’t have stuff to fix
@@tinakr6598 Nope... perhaps immo off... but never even checked if is possible...
@@tinakr6598 So I guess you need to take it to someone that has the stuff to fix it... 👍
Do you remember the seller
Was long time ago... I might be able to find it though... as I think I still have his mobile number... remind me Sunday and I will have a look... I working nights now...😓
I have the same problem today for first time,but it happens nothing :(
I'm going to loose my job if I don't get the key reprogrammed I get payed Friday I'll pay what ever it takes to get someone with the star machine to do it I'm going insane over the smart car it's a pain in the butt. I'd like to meet the person who invented smart car ...
So hello from 2023. I have fortwo 2006 450 that has been out of commission for the last 4 years due to this problem. My location is not anywhere near UK or europe. So where can fet the software to unlock this stupid immobilizer. Can you bypass it all together. Because its an import car even the local mercedes dealer gave up.
Mercedes should be able to do it in no time... providing the issue is exactly the same... You can get the tool and the software to do it, a quick google search and you will find it... 👍👍👍
How much is the machine?
Do a quick google search... They are probably slightly cheaper now... 👍👍👍
no TAN codes?
No... not for already programmed keys... Thank you for watching and for your comment!
@@LMAutoRepairs THats odd, on my screen I dont have the attempts count you have and always asks me to give codes
Its a Clone from star ?
Pillermann Müller Yes....
lmsvvavr where you buy it ? Cardiag....
Pillermann Müller Not this one... eBay...
Change key battery
Mam ten sam problem ze kluczyk mi się pokazuje. Raz załączy raz nie proszę o mała podpowiedź
WAY TOO LONG WINDED…….YOU NEEDTO GET TO THE POINT!
And I did... 😋
Do you have sometinig else to say.
Plenty... but for people that understands what I am talking about... 👍👍👍
We have a smart car that was donated to my school it will not start The person who had it before they parked it I believe it was running but it went to try to start it to bring it to the school would not start pretty sure it’s at for roughly a year what could it be it cranks all the glow plugs light up but it does take a long time for the dash glow plug symbol to go away on a hot sunny day because the diesel be bad and that’s why it’s not starting There’s not even a single sign of it want to start
Have you scanned the car? What codes are you getting? Thank you for watching!
@@LMAutoRepairs we didn’t scanned it because the scanner we have does not scan Mercedes cars
@@LMAutoRepairs i’m pretty sure Mercedes is a different port in the general ones do you have to go straight Mercedes so they can fix it
@@josh.collette1722 No... OBD 2 like any other... Any decent scanner should be able to read the codes on it...
@@LMAutoRepairs ok