Hustler Raptor SD HD SDX Easy Deck Belt Replacement 54" 48" 60"

2023 ж. 13 Қар.
2 250 Рет қаралды

Thank you for watching!! If we helped you out and you want to show your support - LIKE, SUBSCRIBE or give us a shout out below. If you saw something you didn't like leave your comment below as well, these things help us get better!
To see our recommended tools and products visit our Amazon shop at www.amazon.com/shop/individua...
We easily install the deck belt and show the best process and what to look out for when you have the belt off.
We go over the full process and give tips for best results.
The only tool you need is a 3/8" socket for the belt cover on some models.
Other models have a quick release cover that slides right off
This is a Hustler Raptor SD with a 60" deck model 934612.
This same process can also be used on the Raptor XD or SDX on 48" 54" and 60" decks.
We use a 604711 ( amzn.to/3RfwBRU ) deck belt for this and get it taken care of so we can sell it
This is the same deck as on the 932541, 932541, 932541, 933119, 933127, 934539, 934562, 934612, 934778, 935262, 935270, 935841, 935916, 936682, 936708, 938555 and similar to many others.
#hustler #smallbusiness #smallenginerepair #individualizedrepair #deckbeltreplacement
About Us:
My name is Martin. I have been repairing tools and small engines for almost 20 years. We operate a small engine repair shop in Illinois. We service / repair Briggs & Stratton, Kohler, Kawasaki, John Deere, Cub Cadet, Toro Tecumseh, Loncin, Honda, Craftsman, Husqvarna, MTD, Troy Bilt, Simplicity, John Deere, Exmark, LCT, Generac and many more brands. We work on riding mowers, walk behind mowers, snow blowers, zero turns, generators, pressure washers and much more. We normally repair about 3,000 pieces of equipment every year and look at many more that are beyond an affordable repair. Hopefully our videos will save you some money and give you the information you need to work on your own equipment or figure out the issue at hand.
Disclaimer: Links included in the description are affiliate links. As an Amazon associate we earn from qualifying purchases. There will be no additional charge to you for purchasing here. We appreciate your support, which allows us to continue to provide original content!
Please be careful when repairing any piece of equipment and follow all possible safety measures. This video is for entertainment purposes only.

Пікірлер
  • Thanks 🙏 😊

    @philliphall5198@philliphall51985 ай бұрын
    • Thank for watching!!

      @IndRepair@IndRepair5 ай бұрын
  • As always great info. Question about Generic pressure washer. Set valves at.005 as a base. No wand and spark plug out. After pulling a few it got harder to pull. Should I pour water in pump for lube? Just want to hear it burp/start. Thanks

    @steveriggenbach90@steveriggenbach905 ай бұрын
    • Thanks for watching! It sounds like you might be getting back pressure from the pump for some reason. I would hook it up to water and see you can get it to pop over/run on some starting fluid

      @IndRepair@IndRepair5 ай бұрын
    • @@IndRepairit released the pressure by itself. Next day it was gone. It has continual spark but weak. Will check coil gap and system. Bad part is shutting down shop, cold weather on the horizon. Hate it. Take care, will be watching

      @steveriggenbach90@steveriggenbach905 ай бұрын
    • Interesting! You too+

      @IndRepair@IndRepair5 ай бұрын
KZhead