Vintage Ingersoll Rand Impact Wrench Restoration
2024 ж. 7 Мам.
959 392 Рет қаралды
My dad found this years ago when someone was throwing it away. He didn't know if it worked or not, but thought it was cool. I decided to take it out and see if it worked and if it didn't work I would try and restore it. Obviously it didn't or I wouldn't have made a video.
You could probably say that this restoration video is more of a glorified deep clean, but whatever.
Products used in video:
Ingersoll Rand Impact Oil: amzn.to/2WUs92x
Bluing Solution: amzn.to/3rVhH6t
(I use Caswell, but this stuff is similar)
Instagram: instagram.com/Restoration.Station
Facebook: Facebook.com/RestorationStationFB
TikTok: tiktok.com/@restostaysh
Now send it to us and we'll see how much beans it makes!
YOU NEED TO DO THIS
This HAS to happen!
I gave u a view just to look for this please send it to them!
Pppppppp
Lp
What a beautiful tool. No plastic, no pot metal, just solid. Love it.
There is plastic
they dont make em like this anymore, these tools were made to last while todays tools are made to break for monetary gain because capitalism will ruin everythinf
Finally, a restoration video that does just that, restore a tool to its original working condition. I got bored watching other channel videos that go to no end in buffing and polishing all parts to a mirror finish, worthy of being displayed in a museum and not a working tool.
Sue's hubby here! I have watched your video's, the slot machine, this one, the 'janky go-cart' and many other's. Safe to say that, in my six years of watching loads of restoration sites and other videos, i cannot remember sooo many springs and split pins being used, as used in the slot machine vid! Well done to you for ALL the video's you have done, please keep up the very good work that you do, it is a real pleasure watching you restore things that look like, SOME times beyond redemption! Mikky, UK.
I used kzhead.infoUgkx4ynqaujg7rZKFapA8s29kTpRszJGa3-K this for the first time today to replace the front wheel bearing on my rwd 98 dodge dakota. This had absolutely no issue removing or reinstalling the lug nuts and it took off the axle nut without any struggle. Sounds like it's got some muscle to it. Time will tell
Hello. I did an Impactool similar to yours. I got it for my personal use. The top part of the tool where it has a spring in it, was very hard to remove. I almost gave up on removing it, until I watched your video. Without your video I couldn’t have done it. Thank you for that. I would like my channel to be like yours and educational so others can learn, just like me. I shared your link in my video so others can check out your video, I hope you don’t mind. Thank you for sharing and what a great job. Cheers.
NEATO!! I always wondered how an impact wrench worked. Now I know how complicated it was to tear down, clean and restore!! Thanks!!
I like how these old tools were built to be rebuilt if you know what you're doing. I probably would've replaced the fins if I could've found them. Good video!
*veins
@@bradleymichaelw9416 Vanes
A light cleanup with fine grit emery paper would have helped restore them. Just a light rub to make them smooth on the surface to help nice sliding in the groove.
finally. At the age of 25 I know what is inside this tool. 🤣👍👍👍👍👍👍👍👍
I have been using this product of this company in my workshop for last 15 years and its performance is very good. "Ingersoll Rand" name is very good.
Jolly good job. I just love to restore good old, handy tools, equipment etc.
Have fun getting those wheels off now. That’s a great old piece of equipment.
New impacts would shit all over this one.
Nice work! I have an electric Ingersol Rand impact driver from the 50s that was my father’s. Still works, but needs some TLC and a new cord. You’ve inspired me to get on it!
That was a LOT more parts n pieces n ball bearings than I ever would've imagined!
Ça m’épate toujours de voir le démontage !!! Autant de petites pièces… à remonter sans se tromper !!! 👍🏻
Nice restoration
You did a very good job; in fact much better than I could have done-but I would call this "refurbishing" a tool vs a "restoration" namely due to the fact that refurbishing is more of a repair of something not working, whereas a restoration brings something back to as close to new as possible, both in function and how it looks. Again, good job.
When I used to work on I/R's and CP's in the mid-90s. I would horn out the air cylinder with an engine cylinder horner to give it a good cross-hatch on it. Made it work as good as new if not better for the vanes to hold air better. Never seen a 504 before. I can't find it in I/R's archives it's so old. The closest I could find was a 5040. A piece of advice you should never spin a dry bearing. The largest one I ever rebuilt was something like a Model 3955 1 1/2" or 2 1/2" I don't remember which used to open and close train fright car doors. So big and heavy you had to move it on its own hand truck.
I have an old IR aircraft impact riveter. It's missing the tailpiece (the connection to the airhose in the bottom of the handle and I think there's also an adjustment knob). I can't find a picture of what that part even looks like so i can search for one. Any suggestions?
@@ericcumming8518 No
The wire through the hole at the end blew my mind, never knew that!
Nice return to service with that tool, great job and I hope it serves you well
back like new again the shock lock tool, great 👍
I have like 7 or 8 of these guns. Complete.
I really enjoy all the proof marks, reminds me of taking apart an old rifle
Nice video, it was nice to see someone working with bare hands for a change and not wearing gloves. Which in my opinion doesn’t let the user feel all the imperfections on a material, so to work more in tune to the job at hand.👍
Really good upload. Very interesting to see inner workings of one of these tools. I like all your uploads.
Incredible restoration, works great.
Ingersoll Rand London, Connecticut. The vanes are replaceable and still avaliable. Good job!
Impact wrench is super and the restoration is superb American made is excellent.
Very good. Lubrication of every parts is good.
I would LOVE to have an impact wrench like that one! They just don't make 'em like that anymore! :)
You're right. They're better now. Though I will admit that is a beautiful vintage impact wrench.
Not "overkill"...just common sense preventive maintenance....great job!
Imagine how complex engineer was he who built this tool.👍👍
Great job! Never knew there was that much to an impact.
I’m really enjoying your content, keep it up! Try out using a double sided rubber mallet instead of the sledge. You’ll have better control, and less risk of damage to your tools and hands! Lol, it’s great for these sorts of things, you can put more force behind it as well since you don’t have to worry about jacking things up if you over strike or anything like that. Hopefully it helps man, and best of luck on future renos!
Work of art!
The little sounds things make when you wiggle them or pull them apart help you tell when something is made with extra skookum..
Man I wish they still made tools that looks like this. It’s extremely difficult to find solid metal air tools. You can find some, but most have black or black and orange all over them.
The most captivating and interesting part of this restoration? Seeing the "Made in the USA" stamped on it. Considering almost everything we utilize is made in China or a foreign country, that was a nice surprise.
Well the tool is like 100 million years old
the good old days when things were designed to last a lifetime if you looked after them
Talent for sure!
Now send it to the torque test channel for testing!
Very satisfying to watch. Weldone.
When all that air tool oil blows out after being used a bit the internals are going to grind themselves apart. That’s why they grease certain areas
I was thinking this the whole time. That one thin oil cannot be the right lubricant for every part.
@@RyanAlexanderBloom typically the oil is for the air motor and a lite moly grease is used in the mechanism. I’ve rebuilt my share for 15 years. When I saw oil being put in the mechanism. It made me cringe, those balls and cam paths are going to wear out fast.
@@RC-fu6hg the balls were literally covered in red grease.
Hi buddy, I liked your job, beautiful result 👍
Very nice refurbishing project. Can't say you didn't lubricate it, that's for sure. Do you know how much torque it is capable of? Thumbs Up for saving what could have been a trashed tool.
More of a repair than a restoration, but great job making it work again. I was expecting for it to look brand new again.
That lubricant will last approx 2 weeks
Coolest one yet !
Perfect work
4:58 satisfying sound right there.
Awsome work.
SALUDOS CORDIALES DESDE GUAYAQUIL ECUADOR RESTORATION STATION MUY BUEN TRABAJO DE REPARAR MAQUINA ANTIGUA
Great job !!!.
Wow, I tried that once but ended up with more parts than I started with And my wife got really mad when I used her toothbrush (I didn't tell her)
Impact screwdriver bathed in oil! 🤣
Great job 👍
On the next episode, he restores stripped go kart lugs and studs 🤣🤣🤣
I agree. LOL
Good work👏👏👏
Well done 👏 ✔ 👍
great work
I'm pretty sure the gear train hammer and anvil should all be greased every impact I've taken apart was. It should be a good high temperature grease also
perfecto... paso a paso... como se hacia antes... gran trabajo... un abrazo
nice job, nice tool
Great I well remember the one my husband in the shop some years ago
Thank you for your video.
Should last a thousand years!
Fantastic video
Great fix
Good work.
I’m curious, what’s the torque rating on it?
Did you manage to work out the torque it produced and if that fluctuated with air pressure?
That's a laser gun and you can't change my mind
Nuevecita otra vez. Saludos desde 🇨🇴🇨🇴🇨🇴🇨🇴
I have one of these. I know what I'm doing this weekend.
love your videos so i subcribed
The Reason why the older drills of any kind had holes in the part that held the sockets is bcause they had ball-bearings on each side so the socket will stay on
Used one of these as a aircraft mechanic. When it was working right it was a hoss
i think u like Oil! 😆👌🏼 nice work
Looks like she got some jam to her, that's a pretty big hammer for a tool that size.
Is it possible to sand and polish the main aliminum parts to make them smooth and shiny, or there's no need to do this?
good job done,
Like your work 🤝🤝🤝
Good job
Design literally hasnt changed 😂
When an Impact Wrench Was An Impact Wrench 😀😊❤️ Vintage Craftsmanship
Çok kaliteli bir aletmiş. Bayıldım...
Brawo 👍🇵🇱 old ist good 😀😉 pozdrawiam
You should have used grease in gears and forward. It will not stay good like that if used
Nice video
VERY GOOD
40 ft pounds of torque..lol. still awesome vintage rebuild
nice cleaning
I know this is a year ago, but you've done better jobs with other tools. I'd love to see media blast and some polishing. I know it's a tool that is banged around, I've used one before, but if you restore it...make it look awesome!
Ingersol Rand uses grease, you need to use grease in the hammer and bearing areas. Oil is needed in the turbine and trigger areas.
"Poor mans parts washer"😆
hola muy bueno video #Excelente!
One of my jobs where i work is to re-bulid pneumatic tools…. They haven’t changed much since this design….
Nice😊
what is that liquid you spray all over impact?
You couldn’t buy quality like that for any amount of money today. Sure is nice that didn’t end up in the garbage