Digital UHF XLR plug-on transmitter featuring +48V phantom power, microSD card slot, and 3.5 mm lav mic input for use with Evolution Wireless Digital.
For more information, visit sennheiser.com
Follow us:
Facebook: facebook.com/Sennheiser
Instagram: instagram.com/sennheiser
Twitter: / sennheiser
TikTok: tiktok.com/@sennheiser
Subscribe to our newsletter and don’t miss special offers, discounts and news about the Future of Audio: www.sennheiser.com/newsletter.
Sennheiser’s mission is to develop era-defining audio solutions. Be it headphones, microphones or integrated sound systems - with German engineering, decades of experience, and innovative science Sennheiser creates unsurpassed audio experiences that push the boundaries of today's technologies.
Follow Sennheiser’s vision and discover audio solutions that challenge the status quo whilst offering profound new ways of experiencing integrated sound systems as well as pioneering headphones, microphones or headsets!
No timecode? Surprised it’s not included given its price point and competition that does offer it.
Hello there, Whats the difference between the EW-DP SKP (R1-6) and EW-DP SKP (R4-9)? Im trying to look for info on your website but I couldn't find anything. (The whole site looks huge) Thanks
The R1-6 has an RF frequency band of 520 to 576 MHz, while the R4-9 has an RF frequency band of 552 to 607 MHz.
Can I record and transmit at the same time? Is that just for XLR mics or for lavs too?
Yes - the EW-DP SKP can record 24-bit or 32-bit float audio in .WAV format from either the XLR or 3.5 mm connection to a removeable MicroSD while simultaneously transmitting to the EW-DP EK receiver. It's important to note that the 3.5 mm connection will take priority whenever in use, so you're not able to have both an XLR mic and lav mic active at the same time for transmission or recording purposes.
@@robb.blumenreder then Sennheiser is violating patent law in the USA.
@@retroidgamer Could you elaborate on which patent they could be violating? I'm not a lawyer but as far as I know, just because a patent exists doesn't mean no other company can create a product that contains a similar functionality. The patent holder would first of all have to enforce the patent (i.e. take them to court I guess?), and then it would be up to the court to decide if the new design actually violates the patent. If the design is different enough it could be fine, or maybe the patent you're referring to is structured very broadly which could also make it unenforceable (again, up to the court). Sennheiser could also be licensing the patent. I'm not saying you are necessarily wrong of course, just that there are ways where Sennheiser could be operating in a perfectly legal way even if an applicable patent exists
Nice product.. No headphone socket. Can you monitor (or atleast playback) with the phone?
I know there may be devices our there that have this functionality, but you should really be monitoring the audio on your recording device. Usually this would be either your camera or your field recorder. Otherwise you could be having issues such as a faulty cable running between the receiver and the recording device, or other interference, which you wouldn't notice if you're monitoring straight from another output on the receiver or anywhere else in the signal chain. You'll only notice when you start editing and realise your recording is ruined. What I often do is I attach a second transmitter to the headphone output on my camera, so I can carry a wireless receiver and monitor the recorded signal wirelessly. This way I am mobile, yet I can monitor the actual recorded signal. If there are any issues, I will switch back to plugging in wired before troubleshooting to be 100% certain. The phone app would never be able to deliver a high quality and near zero-latency audio feed over bluetooth, so it would not be useful in most situations either. More importantly it would again not tell you if your recorded feed is any good.
@@MoovonMedia thanks for the thoughts. I dont want my camera built with wires and cables, I dont want to carry a field recorder. I want the mic free from the camera and any leads and a 'recording mic' seems a great way to do this for a certain style of low profile run n gun work. So this device seems perfect. But knowing if you can monitor, or even playback over the phone is important to understand the viability of such a low footpirnt solution. I have a full cine cam, also a field recorder which are great for other jobs. I own various XLR mics and this item would fit them unlike a zoom f1 shotgun which needs a propriery mic and.. well im scared of zoom.. i think they break. I could also use it with a receiver on bigger' jobs. Nice. This enquiry is about having building a tiny kit that I can use while out on my push bike for that I beleive a 'recording mic' would be the best thing.
Can you start simultaneous recording for more than on SKP on the app?
Yes, you can. The SKP can be paired as its own Bluetooth device via the Smart Assist app - once linked, you can access it's menu options, which includes Start/Stop for recording, enabling 32-bit float recording, phantom power on/off, selectable lowcut, and a few other options.
@@robb.blumenreder Thanks Robb - though after asking this question here on YT, I messaged Sennheiser and they said you can't trigger recording on more than one SKP simultaneously from the app. My use case is a series of classical music workshops where a high quality stereo recording is needed. Very limited time in each workshop, so having the stereo pair with SKP's on a stand would really streamline things. The issue of course is that it would be preferable to use the first gen recordings to SD card rather than the EW RX unit DA to the camera AD (or field recorder). However, the recordings need to be in sync with each other, i.e. exact same start time. Sennheiser did say you could 1) start recording on the multiple SKP's then 2) send a slate tone to the mic input of the SKP's, then 3) remove the leads to SKP mic inputs and the phantom power plug on mics will be recorded, so notionally you do have a route to a sample accurate match of the two files. It is a bit inelegant though :(
@@Scotvis My apologies for the confusion as I misunderstood the question (ack! I'm sorry). My colleagues did advise you correctly as the "Start Recording" option is on a per device basis, so you'd need to start them either on the device themselves (manually pushing the physical record button on the SKP) or enabling the "Start Recording" option within the app by opening each device setting. While timecode would be a wonderful option here, the SKP doesn't have this feature built-in; short of the suggestion for the slate tone being sent on the 3.5 mm inputs and removed (I agree, inelegant), a clapboard could be a "standby" alternative.
I have the SKP only and I don't find the 32 bits float option in the RECORDING tab ! Is it normal.. ?
You’ll need to make certain you’ve updated the firmware to the most current version, which offers the 32-bit option. When the SKP is connected via Bluetooth to the Smart Assist app, you should see an option for “update available”. Once this is completed, you will see 32-bit Recording in the device menu settings under the “Recording” tab. If you look in Advanced Settings > Device Information, your firmware version on the SKP should read 1.10.0 (current as of today in App Version 2.2.0)
@@robb.blumenreder Yes I've seen the update just after commenting this ! But, are we sure it's 32 bits float (as it's been said on the Internet) or just 32 bits ? I didn't have the time to verify. The real annoying thing is we can't set the volume as loud as we need.. My customers don't even know that normalizing audio exists. 😁 It requires +40 dB at least.
Can I use this device as a receiver for more than one microphone at the same time?
Hey there, our SKP transmitter will only work with one microphone at a time.
Can this work with two recievers i need to use two recievers
@@ddrkingjb Good question! Yes - it can - you can have as many EW-DP EK receivers getting signal from a single transmitter as you'd like (i.e. one transmitter being used to send signal to multiple camera feeds, for example). From a workflow standpoint, the Scan & Sync links your transmitter to a single receiver, but you can tune multiple receivers via the menu on the device or via the app so they get the same audio.
¿Funciona con un receptor EW100 G4 rango A1?
Hola Mauricio - the EW-DP SKP is a digital transmitter designed for use with EW-DP, EW-D and EW-DX systems - it cannot be used with analog Evolution Wireless systems such as EW G4.
@@robb.blumenreder thanks Robb!! 🙌
Es wäre super, wenn dieser Transmitter einzeln im Set mit einem EWDP Empfänger, ohne Bodypack kommen würde ❤
Alle Geräte sind einzeln erhältlich. So kann man sein eigenes, persönliches Set zusammenstellen. Gerne bei uns anfragen ;-)
Maybe it’s also good as the best mic company to create compact wireless mic for content creators as well.
With removable battery and 32bit audio
And sd card
That SD card size is optimal for swallowing and pooping out post spy ops
Also wasn't mentioned that it can't record on the internal SD card and transmit audio and the same time.
Hi Powerflex500 - the EW-DP SKP plug-on transmitter is capable of simultaneously transmitting to any EW-D, EW-DP or EW-DX receiver while recording to it's removeable microSD card.
Aud deutsch, bitte, liebe Firma Sennheiser.
We want AMBEO Rear Speakers!
you said at 3:26 its compatible with the ENTIRE family of wireless product .. but not compatible with AVX ... correct information is must these days so you don't delusion people with it can work and it will not at the end. I have tones of your product and extremely love your items, so not picking on you, but its a must to say the right thing specially if I go buy it and it wont WORK with AVX for example.
Hi Ramsey - thanks for the comment and for being such a strong supporter of Sennheiser. Just a quick note for clarification as the video states, "...The SKP plug-on transmitter is compatible with our entire family of Evolution Wireless Digital products, including: EW-D, EW-DX and, of course, EW-DP". As you pointed out, AVX is a different series, so it wouldn't be cross-compatible with products from Evolution Wireless Digital (or, previously, Evolution Wireless G4/G3, etc...). Sorry for any confusion and I appreciate the feedback!