Gus is the man. Your old video with him got me into his channel. Turns out he has videos on the merrimack river in NH right next to my house. Small world.
@XbenX01013 ай бұрын
Thankyou I really enjoyed this Love the blue lighting and it was nice to see the computer analysis ; there are some smart people out there Have fun, stay safe Stuart in Ireland ☘️
@stuartbrown16773 ай бұрын
Seeing checkmate back on the water is going to be awesome!
@suhhlowbrz3 ай бұрын
I grew up in Indiana on a big lake. I always loved those checkmate! We're moving to ft myers as soon as I sell the house!
@douglasjrboley56573 ай бұрын
Great having your content back… cheers!!
@scottmargeson43323 ай бұрын
I’m so excited I cannot wait. Having my 2.5 being built as we speak.
@southbound1413 ай бұрын
Great project Good to see you using the CDI software Ive been dealing with them since they were "RAPAIR" and Ray took technical support calls do yourself a favor and get a plan to add some serious setback It needs at least a 12" box not sure with the weight of the 3.0 Back in the 90s I installed at least 20 stainless marine brackets on various checkmates with night and day gains my personal starflite with a strong 20" 2.5 carb gained an honest 10 with 18" setback being the only change running both a "rolled" DAH 27" SRX and a 24" DAH Raker without a step the balence is so screwed up that you waste so much power trying to lift the boat by uselessly over triming mine just came alive and was such a blast with the Raker needing little more than neutral trim (relatve to the horizon) meaning the gearcase was running nearly straight thru the water at speed the solid water passed just over the top of the torpedo wasting little water in the air shure miss that ride!!!!!
@deantheboatguy14373 ай бұрын
Looking forward to seeing Gus back on the channel!
@jboi60493 ай бұрын
Coral Gables 🌴🇺🇸 Hehe. Good luck with engine. Anxious to see GUS on Hat 👌 🏄
@jamesparker60173 ай бұрын
Absolutely 💯 beautiful boat !
@bennerpi3 ай бұрын
Grate, 🎉. Best boat vibes from Brazil
@marquesphelder3 ай бұрын
I love your boat!!! It’s so bad ass!!! How many hp is it now?
@davestephens94633 ай бұрын
awesome
@mike_smithbike3 ай бұрын
Did you have to pay 36 hours of labor to find the backwards cables?
@The_Life_Of_Isley2 ай бұрын
How much is the software you using for your boat I’m was looking for some software for my mercrusier
@donny87213 ай бұрын
How much setback are you running? Also, would a shorter mid work on this boat?
@ATStone3 ай бұрын
It needs at least a 12" box not sure with the weight of the 3.0 Back in the 90s I installed at least 20 stainless marine brackets on various checkmates with night and day gains my personal starflite with a strong 20" 2.5 carb gained an honest 10 with 18" setback being the only change running both a "rolled" DAH 27" SRX and a 24" DAH Raker without a step the balence is so screwed up that you waste so much power trying to lift the boat by uselessly over triming mine just came alive and was such a blast with the Raker needing little more than neutral trim (relatve to the horizon) meaning the gearcase was running nearly straight thru the water at speed the solid water passed just over the top of the torpedo wasting little water in the air shure miss that ride!!!!!
@deantheboatguy14373 ай бұрын
Spark blow out…?¿?
@bigalbranim6143 ай бұрын
Broo these models are not very solid in the side of the hull ?? Can you make a video kocking the sides?? My transome os solid solid but not like the sides sounds diferent
@nossrc56383 ай бұрын
just buy a new 300merc bro 25g and your good to go
Gus is the man. Your old video with him got me into his channel. Turns out he has videos on the merrimack river in NH right next to my house. Small world.
Thankyou I really enjoyed this Love the blue lighting and it was nice to see the computer analysis ; there are some smart people out there Have fun, stay safe Stuart in Ireland ☘️
Seeing checkmate back on the water is going to be awesome!
I grew up in Indiana on a big lake. I always loved those checkmate! We're moving to ft myers as soon as I sell the house!
Great having your content back… cheers!!
I’m so excited I cannot wait. Having my 2.5 being built as we speak.
Great project Good to see you using the CDI software Ive been dealing with them since they were "RAPAIR" and Ray took technical support calls do yourself a favor and get a plan to add some serious setback It needs at least a 12" box not sure with the weight of the 3.0 Back in the 90s I installed at least 20 stainless marine brackets on various checkmates with night and day gains my personal starflite with a strong 20" 2.5 carb gained an honest 10 with 18" setback being the only change running both a "rolled" DAH 27" SRX and a 24" DAH Raker without a step the balence is so screwed up that you waste so much power trying to lift the boat by uselessly over triming mine just came alive and was such a blast with the Raker needing little more than neutral trim (relatve to the horizon) meaning the gearcase was running nearly straight thru the water at speed the solid water passed just over the top of the torpedo wasting little water in the air shure miss that ride!!!!!
Looking forward to seeing Gus back on the channel!
Coral Gables 🌴🇺🇸 Hehe. Good luck with engine. Anxious to see GUS on Hat 👌 🏄
Absolutely 💯 beautiful boat !
Grate, 🎉. Best boat vibes from Brazil
I love your boat!!! It’s so bad ass!!! How many hp is it now?
awesome
Did you have to pay 36 hours of labor to find the backwards cables?
How much is the software you using for your boat I’m was looking for some software for my mercrusier
How much setback are you running? Also, would a shorter mid work on this boat?
It needs at least a 12" box not sure with the weight of the 3.0 Back in the 90s I installed at least 20 stainless marine brackets on various checkmates with night and day gains my personal starflite with a strong 20" 2.5 carb gained an honest 10 with 18" setback being the only change running both a "rolled" DAH 27" SRX and a 24" DAH Raker without a step the balence is so screwed up that you waste so much power trying to lift the boat by uselessly over triming mine just came alive and was such a blast with the Raker needing little more than neutral trim (relatve to the horizon) meaning the gearcase was running nearly straight thru the water at speed the solid water passed just over the top of the torpedo wasting little water in the air shure miss that ride!!!!!
Spark blow out…?¿?
Broo these models are not very solid in the side of the hull ?? Can you make a video kocking the sides?? My transome os solid solid but not like the sides sounds diferent
just buy a new 300merc bro 25g and your good to go