KZhead
Ғылым және технология

NO POWERTOOLS Puukko Build - Beginner Knifemaking Project

Njord Artisan
2024 ж. 24 Мам.
157 353 Рет қаралды
Жүктеу

Tutorial on how to make a knife with basic tools. This video shows knifemaking basics aswell as some more intermediate techniques to make your knife stand out.
I'm still a beginner myself so feel free to correct me where I'm wrong and leave your tips and tricks in the comments below.
Chapters
0:00 Intro
0:30 Getting started
1:14 Knife Profile
1:55 Grinding the Bevels
3:12 Spine Decoration / Jimping (optional)
3:45 Fixing the Tang
4:11 Grinding a Fuller (optional)
4:28 Heat Treatment
6:16 Hand Sanding a Mirror Finish
11:00 Making the Handle
14:11 Making the Bolster
16:35 Fitting the Bolster on the Tang
17:12 Glueup
17:32 Finishing the Handle
17:47 Fluting the Handle (optional)
19:09 Weatherproofing the Handle (optional)
19:22 Making a Sheath
22:25 Sharpening the Knife
23:08 Cutting Test
23:52 Showcase
24:18 Super Secret Ending - DON’T LOOK

Пікірлер

  • The video got waaaay longer than anticipated. I tried my best with the chapters, so you can easily see which part is essential and which one is optional. Have fun!

    @NjordArtisan@NjordArtisan2 жыл бұрын

    • THERE IS NO OPTIONAL PARTS! PEOPLE- WATCH THE WHOLE EPISODE god damn it:P!

      @DBCraftWorld@DBCraftWorld2 жыл бұрын

  • NO POWER TOOLS and you decided to make a fuller, spine decoration AND a mirror finish.. Sven, now I know.. You are definitely out of your mind, brother!.. The amount of work you put into this blade is remarkable! Damn... I have no words, only a big wooow! WOOW!

    @DBCraftWorld@DBCraftWorld2 жыл бұрын

    • Thanks a lot David! I guess I got carried away a bit 😂

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • If I could I would give 10 thumbs up!

    @DBCraftWorld@DBCraftWorld2 жыл бұрын

    • I really appreciate the support, thanks brother!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Love your sense of humor, Nice video. I opted to add the blood, Not at first, but as a result of bad timing. looking forward for the next video

    @jeherronjr@jeherronjr2 жыл бұрын

    • Thanks a lot! We don‘t make mistakes, just happy little accidents, right? 😂 Send me a pic on insta if you want, I‘d love to see your work. I‘m pretty excited about the next video aswell. I‘m half way done with editing, it should be up next week

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Немного занимаюсь ножами, но этого очень круто! На коленке закалку сделать очень-очень смело! Молодец 👍👍👍

    @sergeysergeev3070@sergeysergeev30702 жыл бұрын

    • Thanks a lot! I‘m glad you liked it 👌🏻

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Schön und anschaulich erklärt und für mich alleine schon wegen der Griffgestaltung mehr als sehenswert. Ich kannte ja einfache Grooves, aber deine Technik werde ich bei meiner nächsten Griffgestaltung mal ausprobieren. Herzlichen Dank, Micha

    @michaelbraeuer3889@michaelbraeuer38892 жыл бұрын

    • Vielen Dank, Micha! Freut mich zu hören, dass ich helfen konnte. Falls du Instagram hast schick mir gerne mal ein Bild sobald du fertig bist 👍🏻

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Beautiful knife! Very well done!

    @dalewysinger3077@dalewysinger30772 жыл бұрын

    • Thank you and thanks for watching!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Very nice!greetings from funland 🇫🇮

    @repalures5876@repalures5876 Жыл бұрын

    • Thank you!

      @NjordArtisan@NjordArtisan Жыл бұрын

  • Beautiful craftsmanship. Very impressive! Great attention to detail.

    @Tobiah80@Tobiah802 жыл бұрын

    • Thanks a lot! I'm glad you liked it.

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Beautiful knife. Great job & tutorial! I learned a lot.

    @coffeehunter8742@coffeehunter87422 жыл бұрын

    • Thank you! That’s real nice to hear!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Stabiles Messer, mal wieder! Ich bin hier für den Algorithmus ☺

    @CoMpoZeD1@CoMpoZeD12 жыл бұрын

    • Die Firma dankt 👌

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Just catching up on your videos... That is beautiful, and very basic but elegant almost....

    @marykinnick3865@marykinnick3865 Жыл бұрын

  • I like everything about it! Thanks for your video…🐋

    @Headliner99@Headliner992 жыл бұрын

    • Thanks a lot! I‘m glad you liked it. I hope my next videos will be even better

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Veramente bravo, molto ingegnoso d usare gli utensili che hai già in casa! Il fodero rinforzato con ottone forse è esagerato, comunque un gran bel coltello! Complimenti ancora!

    @gianfrancofasce3283@gianfrancofasce32832 жыл бұрын

    • Thanks a lot and thanks for watching! You're right the sheath got a bit out of hand and I wouldn't do it like that again. It was more of a concept testing than a functional design.

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Beautiful knife amigo great video and yes learning thanks. One day I will try making a knife😄👍👍

    @VictorRodriguez-rd5xl@VictorRodriguez-rd5xl2 жыл бұрын

    • Thanks a lot! If you do, send me a picture on Instagram 👍🏻

      @NjordArtisan@NjordArtisan2 жыл бұрын

    • @@NjordArtisan yes I will my friend thank you 😊

      @VictorRodriguez-rd5xl@VictorRodriguez-rd5xl2 жыл бұрын

  • That edited chop was amazing lol

    @christiansteele7386@christiansteele7386 Жыл бұрын

  • Lol "think about your life decisions up to this point" ! 😂 killing me! -Coming together nicely. - Haven't finished watching yet! Just subbed, mid video!

    @coffeehunter8742@coffeehunter87422 жыл бұрын

    • I definitely had some questionable glueups 😄 Thanks for watching and subscribing!

      @NjordArtisan@NjordArtisan2 жыл бұрын

    • @@NjordArtisan - you're welcome! You taught me a lot in thjs single video. I'd like to try it in the future.

      @coffeehunter8742@coffeehunter87422 жыл бұрын

    • That’s really nice to hear! I‘ve learned everything I know from KZhead, so it’s great to share that 👍🏻 Definitely send me a picture of your work on instagram if you want 👌🏻

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Very nice knive and great job! For myselfe I'm much to lazy to make a perfect mirrow polishing like you, respect for this!

    @Thosch-lz8sw@Thosch-lz8sw2 жыл бұрын

    • Thanks! It certainly isn‘t a fun job but for a little knife like that it wasn‘t too bad 😄

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Great job man. The video flew by despite the length. You do a great job of being entertaining and informative. Thanks for the upload

    @andrewmcewan6027@andrewmcewan6027 Жыл бұрын

  • I really enjoyed this build. I like long interesting clips like this. You helped me with some very constructive tips and insights. Great skills Brother!. Thank you. Also... very funny ;+)

    @rickstrodder129@rickstrodder1292 жыл бұрын

    • Thanks a lot! I'm glad you liked it and that I could help. Also thanks for the feedback on the video length. I wasn't too sure about that

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Simple and functional. That's a good project for a beginner!

    @ggsj@ggsj Жыл бұрын

  • That's a very cool project !

    @lamproknives@lamproknives2 жыл бұрын

    • Thanks!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Damn funny, I loved it.

    @chrispiearcy@chrispiearcy2 жыл бұрын

    • Thanks a lot! And thanks for watching!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • oh, hatte mich kurz auf nen schönen scandi schliff gefreut :P aber dickes video mal wieder!

    @klotzey@klotzey2 жыл бұрын

    • Ich hab auf jeden Fall dieses Jahr vor noch mindestens 2 Puukkos zu machen. Da wird dann sicherlich ein scandi schliff bei sein 👌🏻😄

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • simple art .. but beautifully 😍❤👌🏻

    @kemet-son@kemet-son2 жыл бұрын

    • Thank you 🙏 Simple tools and a lot of time is all you need 😄

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • COOOOOOOOOOOOOL. Thanks! 🤘🏆🎉

    @Keelsman@Keelsman2 жыл бұрын

    • Thanks for watching! 👍🏻

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Very nicely done. Thanks for sharing!

    @philochristos@philochristos2 жыл бұрын

    • Thank you and thanks for watching!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Sehr schöne Arbeit.

    @19dave82@19dave822 жыл бұрын

    • Vielen Dank!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Be stoic, Shäl! I am only 1/2 Nordic. Thanks!

    @TedHouk@TedHouk2 жыл бұрын

    • 1/2 is more than enough if you ask me 😄 Thanks for watching!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Well done.

    @javialcaraz8414@javialcaraz84142 жыл бұрын

    • Thank you!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • That's awesome👍👍👍

    @leonidasnorway9821@leonidasnorway98212 жыл бұрын

    • Thanks!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Very nice job, congrats 👍

    @patrickvilda9929@patrickvilda99292 жыл бұрын

    • Thank you!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Awesome result 🙂

    @DaNielsBuild@DaNielsBuild2 жыл бұрын

    • Thank you!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Loved it 🤯

    @adelAdel-mt1ig@adelAdel-mt1ig2 жыл бұрын

    • Thanks a lot!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Wow I rly love how you did the fuller...great video!

    @xaviersonntag4302@xaviersonntag43022 жыл бұрын

    • Thanks a lot!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Your heat treat , did you use butane or propane ? Because if yoy use butane it will struggle to reach temp so propane is the way to go.Hope this helps .Love the channel by the way.😊👍

    @Fishy1764@Fishy1764 Жыл бұрын

  • Молодец очень хорошо

    @user-ki4wd1xc6u@user-ki4wd1xc6u2 жыл бұрын

    • Thanks a lot!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Wow!!!

    @theshieldwall1570@theshieldwall15702 жыл бұрын

    • I hope you're positively wow-ed 😁

      @NjordArtisan@NjordArtisan2 жыл бұрын

    • @@NjordArtisan 100% am! I was putting off making a knife because I felt like I needed to up my tooling; but, I have every tool shown here! Really inspirational. Now I'm going to buy some bar stock and make it happen! Thank you!!!!

      @theshieldwall1570@theshieldwall15702 жыл бұрын

    • @@theshieldwall1570 That's really cool to hear! I was the same way with my first knife . If you're done with yours be sure to send me a picture of it on instagram!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Very nice work mate , having a proper gas forge is better than using those disposable ones you used. I used to do it that way , then upgraded to a charcoal BBQ then a gas forge with a 9kg bottle. How long have you been making knives for ?.

    @rodneymiddleton1044@rodneymiddleton10442 жыл бұрын

    • Thank you! I‘m usually using my propane forge for that aswell. Just wanted to show that you can get the job done with cheap tools aswell. Roughly 2 years I‘d say 🤔

      @NjordArtisan@NjordArtisan2 жыл бұрын

    • @@NjordArtisan cool I have been at it for 4 years only as a hobby mainly use old files , 1080 , 1084 , 1075 & SUP9 . Well I look forward to seeing more of your videos take it easy mate .

      @rodneymiddleton1044@rodneymiddleton10442 жыл бұрын

    • It definitely is a great hobby, best I‘ve ever had 😄 Thanks! I‘m currently editing the next one. Should be up next week 👌🏻

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • I have been thinking of doing something like this to make a few higher end woodcarving knives. I know the Flexcut ones look like they started as round stock. I really just don’t have any clue what steel would be best. Or how done does it need to be before sending off to be quenched.

    @JK-zq9vw@JK-zq9vw Жыл бұрын

  • I used to burn a tang hole in the wood since the power drill i had was trash at the time

    @---Blue@---Blue Жыл бұрын

  • Goode,👍🚴nice

    @antonioteixeira2216@antonioteixeira22162 жыл бұрын

    • Thanks!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • I like the build in German Wörter 🤣

    @svenfimpler4707@svenfimpler4707 Жыл бұрын

  • ❤💯👌👍👍👍👍👍👍👍👍👍👍

    @user-hs3wc3zf8b@user-hs3wc3zf8b2 жыл бұрын

    • Thanks! 🤩🙏🥳🍻

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • But I DO have a belt grinder, cool video

    @JustAddRad@JustAddRad Жыл бұрын

    • Thanks 🙌

      @NjordArtisan@NjordArtisan Жыл бұрын

  • I like you

    @user-rm5rq3ix8p@user-rm5rq3ix8p2 жыл бұрын

    • Thanks! 😉

      @NjordArtisan@NjordArtisan2 жыл бұрын

    • Your welcome. You are very honest man and I appreciated .

      @user-rm5rq3ix8p@user-rm5rq3ix8p2 жыл бұрын

    • Thanks for taking the time to watch and comment. That really helps me a lot!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Hahaha I am notorious for making knives with broken pieces of drill bit in them. Always well hidden though 😂🤷‍♂️

    @SonoraSlinger@SonoraSlinger2 жыл бұрын

    • I almost had one break off yesterday again 😂 Thanks for watching!

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Why you don't use electric instruments? It will be much easier and faster

    @hiroshiokinava6172@hiroshiokinava61722 жыл бұрын

    • You‘ve got a point 🤔

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Fake Sound beim papierschneiden 🤣🤣🤣 ansonsten ganz gute arbeit

    @masterle1988@masterle19882 жыл бұрын

    • Na wenn du meinst 😅 Aber danke

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Mate , please... Don't put that groove on the puukko🙏🏻but good looking knife, except that groove and spine

    @fearthereaper298@fearthereaper2982 жыл бұрын

    • Thanks! It definitely is more of a concept piece than a historically accurate puukko 😄

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • Пипец колхоз ... Я так делал когда 15 лет....мне было... 👎👎🚽🚽😂

    @alexandrneverov1853@alexandrneverov18532 жыл бұрын

    • Well congrats. Sadly I didn‘t discover knifemaking as a great hobby until I was 23

      @NjordArtisan@NjordArtisan2 жыл бұрын

  • hell yea ima make my butterfly knifes look like philipino ones now that i know its as easy as filing those designs into the spine of the knife

    @ghost.of.aleksz.salad.@ghost.of.aleksz.salad. Жыл бұрын

    • The possibilities are endless. There are so many cool designs to add to the spine. I’ll definitely do more of that in the future

      @NjordArtisan@NjordArtisan Жыл бұрын
KZhead