KZhead

How to Read PLC Wiring Diagram | PLC Wiring Tutorial for Beginners | PLC Panel Wiring Diagram

Upmation
2024 ж. 19 Мам.
448 929 Рет қаралды
Жүктеу

✅ Join us here, get awesome perks, and support us, all at once:
/ upmation
Read the full blog post at ▶ upmation.com/plc-wiring-diagram/
How to Read PLC Schematics and Diagram
In Part 1 of this video series, you’ve learned how to read and understand a wiring diagram of an industrial control panel and in this part, we’re going to continue with the PLC part of that same control panel to learn about some PLC wiring best practices.
👉 To watch Part 1 head to ▶ upmation.com/wiring-diagrams/
In this PLC circuit diagram example, we'll go through different pages of an actual PLC wiring diagram document.
First of all, you'll see how we should power up a PLC CPU and its digital and analog cards.
Second of all, you learn about the communication ports of the PLC and its remote IOs such as Profibus ports.
Then we check to see which common devices are wired up to our digital input card and digital output card.
We'll also check an analog output card of a Siemens S7 300 PLC and during this investigation, you'll see how a VFD is connected to a PLC in a wiring diagram.
All in all, you will get to know the PLC control panel wiring diagram better than before and become more efficient in your industrial automation career.
===========================
✅ Please SUBSCRIBE to get notified about the new videos: bit.ly/32mlhu9
===========================
SECTIONS of this video:
0:00 What you'll learn in this PLC circuit diagram example
0:37 Rules of Thumb in Wiring Diagrams
1:12 Power connect of a Siemens PLC
2:27 Profibus communication of a Siemens S7 300 PLC (MPI Port/DP Port)
3:34 Siemens Analog Output card wiring diagram (2 and 4 wire connection)
6:34 How PLC commands the VFD to adjust the motor speed
7:24 Siemens Digital Input card wiring diagram
8:37 Siemens Digital Output card wiring diagram
9:12 Where we use a wiring diagram
===========================
▶ If you've missed our most recent videos, watch them here:
What is a Directional Control Valve? (5/2 Solenoid Valve)
upmation.com/directional-cont...
NO vs NC: 5 Practical and Important Points about NO and NC contacts
upmation.com/no-and-nc/
DCS vs PLC: 5 Important Differences between PLC and DCS
upmation.com/plc-vs-dcs/
===========================
▶ If you want to become a confident PLC programmer, don't miss this free "Siemens PLC Training" course (This course will be continued):
Part 1: Up & Running with PLC Ladder Programming
upmation.com/plc-hardware-con...
Part 2: How to Write PLC Ladder Program?
upmation.com/ladder-logic-plc...
Part 3: How to Simulate the PLC Program?
upmation.com/simulate-the-plc...
Part 4: Motor Start and Stop Ladder Logic PLC Program
upmation.com/plc-program/
===========================
FOLLOW US on other Social Media
👉 INSTAGRAM ▶ / upmationdotcom
👉 TWITTER ▶ / upmation
👉 FACEBOOK ▶ / upmation
👉 LINKEDIN ▶ / upmation
===========================
#plcwiring #Upmation #circuitdiagram

Пікірлер

  • Hi my friend!!!I am very happy that this challenging year 2020 introduced me to your KZhead channel:)Your information is invaluable. Thank you for introducing me to the world of Siemens! I wish you a happy new year!!!

    @razerimperator231@razerimperator2313 жыл бұрын

    • Hi there! Thanks for your nice comment! We're also thankful for having such supportive and enthusiast fans! We hope we can continue our path in 2021 as well. Happy holidays! :)

      @Upmation@Upmation3 жыл бұрын

    • @@Upmation Hello, my friend!When will the new videos be released?You are very interesting to watch:)I'm even willing to sign up for a paid subscription to always stay with you! Thank you for your reply!!!

      @razerimperator231@razerimperator2313 жыл бұрын

    • @@razerimperator231 Hi there! It's very nice reading from you again. We're really lucky to have subscribers like you here! We'll promise to restart publishing videos maximum by 17th March. Thank you!

      @Upmation@Upmation3 жыл бұрын

    • hey, upmation I am not into automation but I love your presentation techniques, It'll be a great help if you tell us about the presentation software you used for this video.

      @GkMonk@GkMonk3 жыл бұрын

  • Brilliant... I worked as an electrical maintenance engineer after my apprenticeship and did plenty on Allen Bradley PLC 2 & Telemecanique. A lot of the machines were big old transfer lines from the 60's and 70's and had huge cupboards with old relay control systems. When PLC 2 came along it was cutting edge stuff. Miss those days.

    @chiselcheswick5673@chiselcheswick56733 жыл бұрын

    • Thank you, Chisel! It's a pleasure to have such experienced people like you here! Please let us know if you have any suggestions for future videos.

      @Upmation@Upmation3 жыл бұрын

  • My guy, I'm first year instrumentation in a maintenance department and I find these videos very valuable. I've struggled with wiring diagrams and this has been very very informative. All the videos are. Please keep making more.

    @lloydkenny3320@lloydkenny33203 жыл бұрын

    • Hi Lloyd! Great to have you here and thank for your input! We try to make the videos to be applicable in the actual industrial environments; but in a simple and easy-to-understand method at the same time. Happy you found them useful.

      @Upmation@Upmation3 жыл бұрын

    • Instrumentation Artisan over here.

      @guillermomathewskaungu2050@guillermomathewskaungu205010 ай бұрын

    • How'd you get a maintenance instrumentation job without knowing how to wire stuff or read wiring diagrams or power diagrams?

      @jasonbourne2171@jasonbourne21714 ай бұрын

    • @@jasonbourne2171 I worked my ass off in the same industry and built contacts that lead me to a job that eventually lead me to an apprenticeship offer.

      @lloydkenny3320@lloydkenny33204 ай бұрын

  • Brilliant.Please do more of these schematics !!

    @Xxxcappie23@Xxxcappie232 жыл бұрын

  • Amazing explanation. I work in automation industry as maintenance technician. I sometime struggle with electrical troubleshooting. This will really be helpful for me. Thanks for this video. I expect more.

    @natesansrinivasan2590@natesansrinivasan25903 жыл бұрын

    • Thank you, Natesan! Happy that we could help you with this video. Please stay tuned for more videos.

      @Upmation@Upmation3 жыл бұрын

    • @@Upmation Greetings! Thank you for the video. It seems there is an error in the diagram. The 24v is connected to the PE of the PLC.

      @truthbebold4009@truthbebold40093 жыл бұрын

  • very clear and functional

    @aliloni66@aliloni667 ай бұрын

    • Glad you think so! Thank you for watching and please share this video with your friends or colleagues.

      @Upmation@Upmation7 ай бұрын

  • Thank you sir!

    @ethans.550@ethans.5509 ай бұрын

    • You're welcome!

      @Upmation@Upmation8 ай бұрын

  • This is quite good. What brilliant way of teaching PLC diagram.

    @femifatola5746@femifatola57463 жыл бұрын

    • Thank you! Happy you liked it!

      @Upmation@Upmation3 жыл бұрын

  • Thank you for your clear and precise language. I wish I had a lecturer like yourself in my college

    @annahabanna@annahabanna2 жыл бұрын

    • Hi, Anna! Thank you for your compliment. It's amazing to hear that!

      @Upmation@Upmation2 жыл бұрын

    • @@Upmation My pleasure😊 Are you considering to create an online course at Udemy/Coursera/LinkedInLearning etc?

      @annahabanna@annahabanna2 жыл бұрын

    • @@annahabanna Hi, Anna! Sorry, we've missed your comment. We're preparing some courses for our own website. We'll announce that while getting ready. Thanks for asking!

      @Upmation@Upmation2 жыл бұрын

  • Ill always love to see more from this beautiful channel. Much love

    @braincrackz@braincrackz3 жыл бұрын

    • Thank you very much! Happy you liked it. Stay tuned for more.

      @Upmation@Upmation3 жыл бұрын

  • this is brilliant and so helpful, thank you.

    @gazyoung8490@gazyoung84903 жыл бұрын

    • Hey Gaz! You're very welcome. Let us know if you have any suggestions.

      @Upmation@Upmation3 жыл бұрын

  • Thanks for uploading these lesson series. This is the first time I have seen a comprehensive module on this toping. Thanks again

    @sumedhasenanayake4254@sumedhasenanayake42542 жыл бұрын

    • Hey! You're very welcome! Thank YOU for watching!

      @Upmation@Upmation2 жыл бұрын

  • Nice job! I never cared for the top - bottom orientation but I'm in the states so it's probably because I'm used to the left - right type. Great info. on the terminology used, that's also different than what you normally find here.

    @adisharr@adisharr3 жыл бұрын

    • Hey! Thank you for the input! Yes, it completely depends on the country that the wiring diagram is designed for. As far as I know, this was meant to be used in a European country.

      @Upmation@Upmation3 жыл бұрын

  • Very informative and useful,your description is on point.

    @robertgachuhi5279@robertgachuhi52793 жыл бұрын

    • Thank you, Robert! Glad you liked it.

      @Upmation@Upmation3 жыл бұрын

  • Subscribed. Really well explained! Keep up the good work!

    @rokutime2627@rokutime26273 жыл бұрын

    • Hey! Thank you! Please stay tuned for future videos.

      @Upmation@Upmation3 жыл бұрын

  • Thanks sir its help me lot to read the drawing now, looking forwards for more videos thanks

    @kuldipsinghbhamra8635@kuldipsinghbhamra86352 жыл бұрын

  • Evert things about this channel is great and wonderful , sincerely , my supervisor at work still wonder about my source of knowledge.

    @adekolasulaiman2549@adekolasulaiman25492 жыл бұрын

    • Hey, Adekola! It's really amazing to hear that! So share these videos with your supervisor as well! :)

      @Upmation@Upmation2 жыл бұрын

  • More on this kind of lessons please. Thank you

    @johnangelodelacruz6431@johnangelodelacruz64313 жыл бұрын

    • Hi John! Of course! We have planed to make more videos like this.

      @Upmation@Upmation3 жыл бұрын

  • Hello Its good recording and basic introduction.

    @hamidullahdarwaish4678@hamidullahdarwaish46783 жыл бұрын

  • Really very good basis knowledgeable from part-1 & part-2 videos. Thank you so much for your effort 😊👌👌👌

    @sharanapolicepatil7900@sharanapolicepatil79003 жыл бұрын

    • You're welcome! and Thank you for your support. Please share this video with your friends and colleagues.

      @Upmation@Upmation3 жыл бұрын

  • Very educational video. Thanks for sharing the knowledge.

    @minwin8857@minwin88573 жыл бұрын

    • Thank you for following us and happy learning!

      @Upmation@Upmation3 жыл бұрын

  • Thank you for the informative and very useful video.

    @andreyace8768@andreyace87683 жыл бұрын

    • You're welcome, Andrey! Thanks for your support.

      @Upmation@Upmation3 жыл бұрын

  • Great explanation. Simply outstanding

    @diwakar8765@diwakar87653 жыл бұрын

    • Thank you! Happy you liked it! Please share it with your friends and colleagues on other social media to help spread the word.

      @Upmation@Upmation3 жыл бұрын

  • Thank you bro.... ❤️ Your voice is so calm. I feel that it is not difficult to learn electrical after seeing your video.

    @shintukumawat2645@shintukumawat2645 Жыл бұрын

    • Glad to hear that, Shintu! and thank you for your complement :)

      @Upmation@Upmation Жыл бұрын

  • thanks for additional info...

    @junubando1322@junubando13222 жыл бұрын

  • Thanks for your useful channel and videos

    @golnazjariani6283@golnazjariani62833 жыл бұрын

    • Hey Golnaz! Thank YOU for your comment and support.

      @Upmation@Upmation3 жыл бұрын

  • beautifully explained...looking forward for more such videos!!

    @surajr1226@surajr12262 жыл бұрын

    • Thank you, Suraj! More to come! Please stay tuned.

      @Upmation@Upmation2 жыл бұрын

  • Thanks for making this video. That was very helpful for me.

    @shamiulshakib5307@shamiulshakib53072 жыл бұрын

    • You're very welcome! Thank YOU for watching!

      @Upmation@Upmation2 жыл бұрын

  • thanks for your information about PLC panel wiring diagram...i loved it

    @syufrijal@syufrijal3 жыл бұрын

    • You're very welcome! Happy you loved it! Stay tuned for more.

      @Upmation@Upmation3 жыл бұрын

  • Top to bottom. Left to right. Like a good book

    @timwilson8118@timwilson81183 жыл бұрын

  • Really was very good. Thanks

    @masumahmed7978@masumahmed79783 ай бұрын

  • very helpful. Thank you!

    @alphagassama7946@alphagassama79463 ай бұрын

    • You're very welcome!

      @Upmation@Upmation2 ай бұрын

  • Very informative. Hope to see more of this applied in troubleshooting.

    @kaluhenrietta6799@kaluhenrietta679911 ай бұрын

    • Happy you liked this video! Sure, we will publish videos on troubleshooting as well.

      @Upmation@Upmation11 ай бұрын

  • Thanks a mil

    @sharifskijr.1257@sharifskijr.12573 ай бұрын

  • Many thanks for this course

    @PMEUROPE@PMEUROPE Жыл бұрын

    • You're very welcome! Thank you for watching! Please share this video with your friends or colleagues and let us know if you have any questions or suggestions.

      @Upmation@Upmation Жыл бұрын

  • Very good. Thanks 🙏🙏🙏🙏

    @surendrakverma555@surendrakverma5559 ай бұрын

    • You're very welcome! Thank you for watching!

      @Upmation@Upmation8 ай бұрын

  • Started my control system career and this make wiring diagram easy to read after knowing this now

    @muscleman4799@muscleman47992 жыл бұрын

    • Perfect then! Great to hear that and happy learning! Please let us know if you have any questions or suggestions.

      @Upmation@Upmation2 жыл бұрын

  • very good video, simply describing elements and connections, Thanks

    @DlerRashid@DlerRashid10 ай бұрын

    • You're very welcome! Great to hear it was helpful!

      @Upmation@Upmation10 ай бұрын

  • Very thankfull for your content.

    @himsanehassan6909@himsanehassan6909 Жыл бұрын

    • You're very welcome! Thank you for watching!

      @Upmation@Upmation Жыл бұрын

  • amazing thank you so much! please do more

    @peanutpotion@peanutpotion3 жыл бұрын

    • You're very welcome! Stay tuned for more.

      @Upmation@Upmation3 жыл бұрын

    • @@Upmation can’t wait for more! Just general navigation is really helping thank you

      @peanutpotion@peanutpotion3 жыл бұрын

  • I'm an American electrical tech, but I deal with foreign manufacturers, such as Rolls-Royce and Siemens, documents a lot. Learning the addressing system from your first documents video was huge! I feel dumb for not figuring out that tbe decimal was for the column. 😅

    @warren286@warren286 Жыл бұрын

    • Hey, Warren! Thanks for sharing. Electrical techs should be lifelong learners by the way! Stay tuned for the next episodes.

      @Upmation@Upmation Жыл бұрын

  • i wactched all off video your channel i need more

    @redmountain634@redmountain6343 жыл бұрын

  • Excellent explanation sir please

    @karthi.mkrishnaveni9596@karthi.mkrishnaveni9596 Жыл бұрын

  • Very nice explanation till date I never saw such a great video on PLC wiring

    @sandeshsonawane3868@sandeshsonawane38683 жыл бұрын

    • Hey, Sandesh! Hope we can help you thru the future episodes of this video as well. Please share this video with your friends and colleagues to help spread the word. Thank you!

      @Upmation@Upmation3 жыл бұрын

    • @@Upmation Definitely I share video with my friends and colleagues

      @sandeshsonawane3868@sandeshsonawane38683 жыл бұрын

  • Thank you so much for this helpful video

    @hectortorres542@hectortorres5423 жыл бұрын

    • Hi Hector! You're very welcome! Please share this video with your friends and colleagues on other social media.

      @Upmation@Upmation3 жыл бұрын

  • Many thanks for this video and please make more videos like this how to red electrical diagram . Best wishes

    @AnasAl-Dhafiri@AnasAl-Dhafiri3 жыл бұрын

    • You're most welcome! Thank you for watching! Sure thing! I'll transfer your suggestion to the team.

      @Upmation@Upmation3 жыл бұрын

  • Very useful!!! Thanks!

    @alro7779@alro7779 Жыл бұрын

    • You're welcome!

      @Upmation@Upmation11 ай бұрын

  • God bless you man please keep going

    @mohamedhsk8954@mohamedhsk89542 жыл бұрын

    • Hey, Mohamed! Thank you very much and we definitely do! :)

      @Upmation@Upmation2 жыл бұрын

  • Very important information. Congratulations.

    @sergioresendes4116@sergioresendes41163 жыл бұрын

    • Thank you! Please stay tuned for more.

      @Upmation@Upmation3 жыл бұрын

  • Very informative and easy to grasp Videos. Keep it going ...

    @ahmadawawdeh2257@ahmadawawdeh22572 жыл бұрын

    • Thanks, Ahmad! Will do!

      @Upmation@Upmation2 жыл бұрын

  • So helpful. Thanks.

    @mannah7l223@mannah7l2233 жыл бұрын

    • You're welcome! Happy learning!

      @Upmation@Upmation3 жыл бұрын

  • Thank you very much. I am follow your KZhead channel.

    @harunorrashid9016@harunorrashid90163 жыл бұрын

    • You're very welcome and thank you for your support.

      @Upmation@Upmation3 жыл бұрын

  • Thanks a lot for easy understanding videos.. Pls make more videos for plc program example , like u make before water filling tank control👍 Also I would like to watch communication and networking of industrial automation.

    @amitprajapati8439@amitprajapati84393 жыл бұрын

    • Hi Amit. You're welcome and thank you for your suggestion. Yes, we'll definitely publish more videos on PLC programming examples.

      @Upmation@Upmation3 жыл бұрын

  • Many thanks for this excellent video

    @alphab5543@alphab55432 жыл бұрын

    • Welcome! Thank you for your support.

      @Upmation@Upmation2 жыл бұрын

  • Thanks for that

    @kizitoandi583@kizitoandi583Ай бұрын

  • Thanks for your presentation 🌺🌺🌺

    @ahmed75502@ahmed75502 Жыл бұрын

    • You're welcome, Ahmed!

      @Upmation@Upmation Жыл бұрын

  • Thank you for the informative and very useful video.Thanks for your useful channel and

    @md.alamgirbadsha8593@md.alamgirbadsha85933 жыл бұрын

    • You're very welcome! :)

      @Upmation@Upmation3 жыл бұрын

  • Many thanks for wonderful information

    @athilaldurry5880@athilaldurry58803 жыл бұрын

    • You're very welcome, Athil!

      @Upmation@Upmation3 жыл бұрын

  • Thank you for your sharing sir,goodluck.

    @simpliciocamirino2271@simpliciocamirino22713 жыл бұрын

    • You're very welcome and thank you!

      @Upmation@Upmation3 жыл бұрын

  • Its really helped me alot . Thanks

    @phyoyarzarhein3899@phyoyarzarhein38992 жыл бұрын

    • You're very welcome!

      @Upmation@Upmation2 жыл бұрын

  • Keep going. Thanks a lot

    @AbdullahAhmed-vj2vi@AbdullahAhmed-vj2vi3 жыл бұрын

    • You're welcome!

      @Upmation@Upmation3 жыл бұрын

  • Good explanation, thanks

    @lakshmananmarimuthu2112@lakshmananmarimuthu2112 Жыл бұрын

    • You're welcome! Glad you liked it. Please share it with your friends and colleagues.

      @Upmation@Upmation Жыл бұрын

  • Awesoooomeee!!! thanks guys!

    @ClaudinneV@ClaudinneV2 жыл бұрын

    • You're very welcome, Claudia!

      @Upmation@Upmation2 жыл бұрын

  • Thanks for this informative video

    @parush2007@parush20073 жыл бұрын

    • You're very welcome, Parush!

      @Upmation@Upmation3 жыл бұрын

  • Informative and helpful video. I request to make a video on how Electronics Main Engine works.👍Thumbs up for this one.

    @heroldguadalupe7826@heroldguadalupe78263 жыл бұрын

    • Hi Herold! Thanks for your nice comment. Could you please provide more details on your request?

      @Upmation@Upmation3 жыл бұрын

  • Thank you so much.

    @abujafor7915@abujafor79152 жыл бұрын

    • Always welcome!

      @Upmation@Upmation2 жыл бұрын

  • Thank you so much, I really learn alot can you please do video on troubleshooting techniques with panel using wiring diagram

    @topeanjorin5033@topeanjorin50333 жыл бұрын

    • You're very welcome! Yes, it's a very good suggestion! I'll transfer it to the team. Thank you!

      @Upmation@Upmation3 жыл бұрын

  • Very happy for this video

    @kiranchoudhari4717@kiranchoudhari47173 жыл бұрын

    • Happy you liked it!

      @Upmation@Upmation3 жыл бұрын

  • Love your videos, however, can you check between 1 minute 50 seconds and 2 minutes to see if you have made a mistake when labelling the 24v, OV and earth cabling to the PLC. It's obviously minor but I would like to know for clarity. Thanks!

    @michaeloneill151@michaeloneill1518 ай бұрын

    • Hi Michael! It's great to hear you liked the videos! You are absolutely right.

      @Upmation@Upmation8 ай бұрын

  • Very good presentation and narration

    @sreenivasuluanumakonda4593@sreenivasuluanumakonda45932 жыл бұрын

    • Hey! Thank you very much for watching! Please let us know if you have any kind of suggestion or question. And please don't forget to share the video with your friends and colleagues :)

      @Upmation@Upmation2 жыл бұрын

  • Thank you for this Video. My Mission is to Learn Control in 2022 and I will achieve it successfully.

    @toyinorodare4072@toyinorodare40722 жыл бұрын

    • Hey, Toyin! Happy to hear that and wish you the best on your 2022 goals. Don't hesitate to contact us in case you need help down the road.

      @Upmation@Upmation2 жыл бұрын

  • This video is excellent, is there any chance of getting a PDF version of the drawing package for further review?

    @grizzli1994@grizzli19947 ай бұрын

    • No, unfortunately, it is not possible to share the document. Thank you for your understanding.

      @Upmation@Upmation7 ай бұрын

  • I have an interview for a controls engineer position only a few days after graduating college this semester, cramming hard to understand this!

    @dakotahrivers6640@dakotahrivers66405 ай бұрын

  • Hi 👋 sir good explanation thank so much

    @avisivengat1183@avisivengat11837 ай бұрын

    • You are welcome! Thank you for watching!

      @Upmation@Upmation7 ай бұрын

  • nice this explaine

    @alwaga7917@alwaga79172 жыл бұрын

  • thank you!!

    @circleoftech94@circleoftech942 жыл бұрын

    • You're very welcome!

      @Upmation@Upmation2 жыл бұрын

  • Thank you so much. This is such a great channel. keep up the good work. Will it be possible to get a copy of the wiring diagram please.

    @gusainmoses6441@gusainmoses64413 жыл бұрын

    • Hi Gusain! Thanks for your comment! We already have communicated with the manufacturer company to see if we can share the whole document with our follower and subscribers like you. But at the end of the day, if we did not receive any positive answer, I assume we can share at least the pages we have discussed in this video and part 1. Till then you can read and see the step by step article here: upmation.com/plc-wiring-diagram/

      @Upmation@Upmation3 жыл бұрын

  • Impressive explanation

    @helloworld892@helloworld8923 жыл бұрын

    • Thank you! Please stay tuned for more.

      @Upmation@Upmation3 жыл бұрын

  • Thank you very much

    @Honeybatger@Honeybatger2 жыл бұрын

    • You're very welcome!

      @Upmation@Upmation2 жыл бұрын

  • Thanks

    @muhammadshafique235@muhammadshafique2352 жыл бұрын

  • Very good explanation

    @ramniwassharma9518@ramniwassharma95182 жыл бұрын

    • Great to hear that! Please stay tuned for more.

      @Upmation@Upmation2 жыл бұрын

  • Thx for this a great video and u r deserve more than like and subscribe 😍😍

    @ahmedessam3280@ahmedessam32803 жыл бұрын

    • Thank you very much for your support, Ahmed!

      @Upmation@Upmation3 жыл бұрын

  • Thanks for your explanation, you are the best. But can you please, make a video of electrical control devices like the programable relays, limit switches, vibration switches, heater installed inside electrical motors etc, and their electrical diagrams. Thanks

    @fantech72@fantech72Ай бұрын

  • superb explaination

    @rajithmr2159@rajithmr21593 жыл бұрын

    • Thank you, Rajith!

      @Upmation@Upmation3 жыл бұрын

  • thank you so much

    @eng.elfarajani1416@eng.elfarajani14163 жыл бұрын

    • You're very welcome! :)

      @Upmation@Upmation3 жыл бұрын

  • Great video 👍👍👍, i want that wiring diagram pdf plz to be understand more 😘😘

    @marwansadeq3649@marwansadeq36493 жыл бұрын

  • hi can you tell me how did u build the vfd block or which website u used to grab it , and the plc too

    @youssefhassan4384@youssefhassan43845 ай бұрын

  • Very nice,and I agree

    @evancebunde8314@evancebunde83142 жыл бұрын

    • Thank you!

      @Upmation@Upmation2 жыл бұрын

  • Good 👍

    @edisupono2335@edisupono23352 жыл бұрын

  • very useful.....thanx

    @talalboss2857@talalboss28573 жыл бұрын

    • Hey! You're very welcome! Let us know if you have any questions or suggestions.

      @Upmation@Upmation3 жыл бұрын

    • I will do.... thanks a lot

      @talalboss2857@talalboss28573 жыл бұрын

  • Thank you

    @suriyat8773@suriyat87732 жыл бұрын

    • Welcome!

      @Upmation@Upmation2 жыл бұрын

  • Hey! well elaborated! Your vedios helped me a lot. But please tell explain every tags/numbers assigned between 24v and 0v e.g in Page 60 col 0 (60.0) what is+EP1, 024 in bottom, 6011…6021. These are for what.. Please tell me

    @ersandeep6363@ersandeep63637 ай бұрын

  • Many thanks sir I hope you can make more videos about how to red electrician diagram. Kind Regards

    @AnasAl-Dhafiri@AnasAl-Dhafiri3 жыл бұрын

    • You're very welcome! Sure we will! I'll transfer your suggestion to the team. Thank you!

      @Upmation@Upmation3 жыл бұрын

  • very Good So Beautiful Chanel

    @warasali7875@warasali78753 жыл бұрын

    • Many thanks!

      @Upmation@Upmation3 жыл бұрын

  • does any other youtube professor want to say that at min 1:54 there's a typo, instead of making the congrats for this good video? thanks!

    @flaviopugliese8324@flaviopugliese83242 жыл бұрын

    • Ah! Thank you very much to mention that! But don't worry! We decided to assume these comments are originating from being over-attentive or being meticulous! :) Hope they use this trait for learning the useful points in the videos as well! BTW, thank you for your comment.

      @Upmation@Upmation2 жыл бұрын

  • I liked a lot both videos, it's an important information for me. I have a question, what is the exact normative to desing this type of electrical diagrams ? Greetings.

    @marlonzapata8240@marlonzapata82403 жыл бұрын

    • Hi, Marlon! Thank you for your interest in our videos. There are different standards for drawing electrical diagrams but the whole idea is the same.

      @Upmation@Upmation3 жыл бұрын

  • Thank you friend for your video it helped me a lot to get started in the world of plc programming, ask what software you use to create the electrical plans and what is the standard for the electrical plans. Thank you

    @mateosena571@mateosena571 Жыл бұрын

    • Hey! You're very welcome! The software that is used to create these electrical diagrams is EPLAN and the standard is IEC.

      @Upmation@Upmation Жыл бұрын

  • Great channel but keep on uploading dont stop

    @logicmonster6197@logicmonster61973 жыл бұрын

    • Thank you very much! Will do! Please stay tuned for more and share the videos with your community on other social media to spread the word.

      @Upmation@Upmation3 жыл бұрын

  • Thanks for the video. Is there a reference book related to the same topic you suggest?

    @omarelmasri7749@omarelmasri77493 жыл бұрын

    • You're very welcome! I am actually not aware of that. But I think these are the things which may vary from one drawing to the other and the whole idea and symbols are the same. By experiencing different drawings you get more confident.

      @Upmation@Upmation3 жыл бұрын

  • Hi! Is there any chance I can download the material? That would be great if I can have some hands-on experience with the diagram.

    @minhtam5051@minhtam50512 жыл бұрын
KZhead