Making Woodturning Big Scraper Tool with HSS(high speed steel)
Hello, this is a video of making a big scrapper for wood lathe using a flat high speed steel bar.
The edge of the scrapper's blade is a gentle curve that makes it useful for organizing the inner side of a dish or bowl.
The abrasive angle of the scrapper was polished between 60 and 65 degrees.
The blade used is HSS (high speed steel, SKH-51 / HRC 60-62) 35x8x200.
If you find these videos entertaining I’d appreciate you hitting the thumbs-up button and if you'd like to see more from me you can simply click the subscribe button or bell icon. Thanks for watching. Have a good day.
[DISCLAIMER]
- My video is for entertainment.
- The way I use it may not be safe. Please take responsibility for your own safety.
- Always read and understand the manufacturer's use and safety instructions when using tools/machines
#Woodturning #Woodworking #Tools
Just the fact that one doesn’t need to temper the steel to replicate this is a major plus! Great video. As a beginner I had never seen the wire slot burning trick but it’s so cool and ingenious. Thanks!!
Very well done sir!!
Well, it’s back to the old shop again to attempt to create this great tool! Thanks for the inspiration.
I bought piece of similar HSS off Amazon. I had my doubts but it's great. I made scraper and use a sending belt sharpen.
Beautiful.
great job, and a very handy tool
Well done sir!
Tebrikler , benzeri videolar bekleriz.
미치겠네요...생산성과 하고 싶은 것과....음....
Brilliant work, dude! Nicely done! 😃 Beautiful shavings at the end! Stay safe there with your family! 🖖😊
BOM DIA MEU AMIGO MUYONG, AO LER ESTE ESPERO QUE ESTEJA BEM TUDO TRANQUILO. __ SENHOR MUYONG, PODERIA ME RESPONDER , QUAL FOI O GRAU USADO DE AFIAÇÃO PARA COM ESSA GOIVA??? POR FAVOR. __ AGUARDO SEU RETORNO MEU MUITO OBRIGADO.
Que modelo de torno es gracias
Hi , did you harden the hss?
무영님 혹시 제작하신 8T두께의 고속도강 구매처를 알 수 있을까요? 끌이나 조각도를 만들만한 hss는 국내 판매처를 볼 수 있는데, 선반칼을 만들만한 두꺼운 하이스강은 찾을 수가 없네요.
Very nice scraper. I may use your design to make a negative rake scraper. Thank you for sharing!!!!
Thank you for watching my video! Always be healthy and happy.👍😀
Good job!!
I have made a lot of my own lathe tools but you do probably have more invested in this one them buying, me too. At one point I thought you were going to get a catch when you approached the end of the curvature. I have one negative rake scraper but not my favorite. Shear scraping you can take off just a wisker of wood. 👍
Mmnjî
Put a negative rake on the back side.
Verry good job!!!!
Hello my friend, Congrats on the project and smart way of working that hides great experiences. see you later. Big greetings.
Love it! I'm curious which grits you're using on the grinding wheel to create and sharpen the bevel.
Beautiful tool with a very well done finish. Congratulations. I would like to know the durability of the cutting edge and if you need to sharpen it constantly? Why is there no need to quench HSS? Big hug from Brazil
👏👏👏👏👏👏👍👍Goog job
Great instructional video thanks. What technique is shown fixing the HSS to the tang? I could not tell whether it was welding or brazing. Also what equipment are you using for this? The nozzle looked small & ideal for small jobs like this.
The initial tacks to hold things together were don't using 'mig welding' the rest of the welding was 'tig welding' TIG has a steeper learning curve but it's worth it!
Смешно когда отрезали под хвостовик то зачем то охлаждали водой , а затем стали варить полуавтоматом то нагрелся до красна ?
I have wanted to make some more of my own tools. So far iv only made a parting tool and a couple bars for carbide cutters. Where do you get your steel from?
Probably from Harbor Freight.
Great, really nice all around. One note, I've never heard hot metal make that sound before.....You sprayed water on it and it crowed.......:)
😂👍
The HSS material is somewhat questionable (looking from the shape of sparks while grinding).