TATP Synthesis

Peroxidation or nitration without cooling falls under the term Darwinistic natural selection.

如何作法？

Why is it without sulfuric acid safer ?

@@noahsabel2115 acetone peroxyde made from HCl tend to be more stable than made from sulfuric acid, I Don't know exactly why but other people have experienced both and I think there are also studies that shows that. (And the cooling helps to form the tri acetone peroxyde, when its under 10°c otherwise it forms the di acetone peroxyde which is more sensitive)

@@adrixyn This is not exactly true. Best results can be achieved with citric acid as a catalyst. There is a simple explanation, why stronger acides (higher Pks-value) make TATP more unstable: Reaction goes faster and TATP-crystals are largerr and formed more irregularly. Crystals with dendrites or needles tend to break easily, where enough energy can be released to initiate an explosion. Weaker acids produce smaller crystals with no irregularities. 😃

Merci mon ami

My friend, after filtering the TATP, you should store it in a container containing water or acetone to keep its sensitivity down.

Ok thx​@@Playfulchemists

I have not measured yet, my friend

My friend is synthesizing PETN inside the channel

Yes

Celsius my friend

Well done bro ;) I read that sulfuric acid remains trapped in the crystals and those 50 degrees of the radiator are enough to make it explode. I believe that all things are dangerous, but the risk is reduced in the hands of those who have a minimum of foresight and good intentions. It's now the 10th time I've made it and it has never given me any problems! I wring it out when it's wet, I even roll it out with a rolling pin. Even when dry it does not react when subjected to LITTLE friction or low IMPACT. The heat, however, activates it very well :D every now and then I like to have a nice bang in the mountains and hear the echo. Gunpowder is expensive and not even close to that.​@@kylehowat6775

​@@kylehowat6775H2SO4 was always working for me. And sometimes the amount of the product was in kg

@@what-kr9rbno sir. Watch the video he simply uses it as an endotherm to keep the temp of the ice bath down

@@ChildrenOfOwls I mean This is what to combine with TATP to create a stronger substance

and what concentration?

The volume of acid is 5 ml Hydrochloric acid 37% ​

Thanks :-)

The range of this amount of raw materials and purity percentage is 38 grams

Thanks a lot brother I appreciate that and by the way the hydrogen peroxide I am having is around 50%conc and in the synthesis you used 30% hydrogen peroxide if you don't mind can you tell me the stoichiometric amount for 50%hydrogen peroxide cause I am I am not interested in diluting my 50%hydrogen peroxide. Like how much ml should I use if the conc of my h2o2 is 50%

I left it at room temperature my friend, but you can use the freezer

@@Playfulchemists do you think tatp generates faster in room temperature or in a cooler or freezer

@@vitox_pvp6368 It is known that in the freezer, the reaction is completed faster and precipitates ​

@@Playfulchemists thank you 👍🏻

We pour a saturated solution of sodium bicarbonate on TATP until its pH is neutral or higher than 7.

The percentage of acetone is laboratory

@@Playfulchemists thx

@@Playfulchemists 99% ?

@@r.pzr.7503 yes

5ml %37

@@Playfulchemists thanks.

of sodium bicarbonate solution

Yes, my friend, just take care of yourself Bring the temperature below 10 degrees Celsius And slowly add the acid drop by drop

33%

If you have a lot of ice, you don't need ammonium nitrate, you don't need salt can be used ​

I used sodium bicarbonate solution to wash TATP from acid

Tnx

​tnx

TATP is a very sensitive substance and should not be used in large quantities

dude are you still alive ? how did that shit went

Gravity??!! or purity, Sulfuric acid purity 98%

I see 👍

I don't know, my friend, but semi-sensitive explosives such as PETN, RDX and ETN are usually plasticized.

Lol bro, definetly cannot unless very wet

Sure

OK, but promise not to blow up somewhere!! :)

@@Playfulchemists bet sorry for not saying anything I love your videos

30 percent

My formula is 38ml h2o2, 25ml acetone and 2ml hydrochloric acid

My friend, the temperature of the solution should be below 15 degrees Celsius. What was the reaction time of your solution?

Put the same solution in the freezer. If it still does not crystallize after a day, the purity of your raw material is low

@@Playfulchemists h2o2 50%, hcl 34-36% and aceton on nail cleaning product

If I just cool the solution now can it appear crystals?

peroxyde d'hydrogène 33% et acide chlorhydrique 37%

37% my friend

​@@Playfulchemists what was h2o2 percentage, 12 or 30% thank you

@@honja6528 35%

@@Playfulchemists thank you

Thank you for your comment, my friend, no, adding ammonium nitrate was not in vain, maybe you can keep the temperature down with ice at first, but when adding the catalyst, you must add salt to the ice. Ammonium nitrate is more effective than sodium chloride ​

@@Playfulchemists perhaps that may give a spike of reduced temperature in the water, but the ice still had plenty cooling potential, so doing this at a slower rate would have been a option too, certainly for those who dont want to use chemicals for cooling, just my 2 cents.

​@@PlayfulchemistsBrother, what did you pour into the filter? Is it water or something else?

@@user-in8bz3kd7d I used sodium bicarbonate solution, my friend

@@Playfulchemists Thank you, I am curious about everything, except drugs, I am very interested in (Breaking Bad) electromagnets, is the movie a lie, can it really destroy laptop electricity from such a distance? Also, is ricin really that powerful? What I saw in the movie is different from what Wikipedia said. Isn’t it true that castor seeds are no longer poisonous after being heated? Can you answer this question? And shouldn’t those (French people) who were poisoned with tetrodotoxin die? Why can you take it back and dismember it?

You can take it below 0, but the temperature is 5 to 10 degrees Celsius

37%

@@Playfulchemists and the hydrogen Peroxide

33%

All materials are Laboratory my friend

Why is it bad to use ammonium nitrate? ​

@@Playfulchemists urea work too

from toilet bowl cleaners lol

37% hydrochloric acid is enough, my friend

@@user-ys6xt2zc6b Bleach cannot be used to produce TATP, or the yield will be very low ​

Sorry, I don't understand what you mean

organic chemistry

organic chemistry is the only way to make explosive? Then where I should learn this organic chemistry or which course is suitable for this? And what course you studied.

In organic chemistry, they don't teach you how to make explosives, they only teach you how to synthesize different substances and how to form bonds.

You should use the organic chemistry articles available on the internet

Thank you bro for the reply:) you have any suggestions for where to start?

For this amount of raw materials, I got 38 grams of final product

33%

​@@Playfulchemists Can I use h2o2 50% bro??

Yes ،You can use distilled water to reduce the percentage of hydrogen peroxide

@@Playfulchemists But i don't know distilled it. Can you help me?

Grazie amico mio

@@Playfulchemistsma sei italiano

@@duceimperatoreromano no amico mio :)

@@Playfulchemists can you make nitric acid using household material? i’m from italy and here some product are banned

@@duceimperatoreromano To prepare nitric acid, you need materials such as (sodium nitrate or potassium nitrate or ammonium nitrate), which is obtained by adding sulfuric acid and distilling it.

Please comment in English

​@@Playfulchemists kitty (КИСА) or TATP, a dangerous substance!! it's easy to make it, but it's also easy to lose your limbs (fingers).)))

@@blok_pitaniya_460_wattno 😳😳😳really??

5ml 37%

@@Playfulchemists .hanks

I don't know, I didn't do it

No.

The hydrogen peroxide you want to use is too dilute, I don't think you can make it ​

@@Playfulchemists thanks for your reply Can I concentrate it in a beaker by evaporating all the water out of it

@@AmmarKhan-zo3fy No, hydrogen peroxide is more volatile than regular water, so you won't get the same 6%

Yes, just fine, youll need to use alot more solution but otherwise its fine, higher concentration is preffered for less fluids needed and also a bit better yield

​@@AmmarKhan-zo3fynot by heating, and it decomposes under uv light, so keep it in a dark place thats perhaps on the dry side, it will slowly evaporate water, very very slow method but it is what it is, other methods are quite dangerous besides frezing and removing the frozen from liquid bits but that needs to be quite precise to work iirc, havent tried that method yet

we wait for the temperature to reach below 15. 15 what? Grasshoppers? Lawnmowers? What are you talking about? Pls define it next time. If you talk about 20 degrees, define it. 20 degrees Fahrenheit, Celsius, what ever. 15 what? Degrees? Molecules? Thx

Well, my friend, it is 20 degrees Celsius :)

This video is made for those who know about chemistry and its problems, I suggest you not to do these experiments.

eh, but if you do not define the temperature, you gonna have a lot of problems with people who try it out in real life. They will be doing dangerous stuff. So, it is up to the one who makes the video to at least define what he means. And, i was not planning on doing anything like this, but it is very important to know if it is celsius or fahrenheit. I hope you agree. @@Playfulchemists PS: i do love to know why you think i do not know about chemistry and its problems? Because it seems to me i know just a tiny bit more since i would not have made that mistake in my videos. Because it is important. Especially for a video. Because you can bet that people are going to try it. And if they think it is fahrenheit, things might go wrong. (i know that in this case it would probably not matter that much, but if you are doing chemistry, define the stuff. Like if you use weights, define if it is grams, pounds, kilograms, what ever. Makes it a lot easier for everyone) PPS: my chemistry teacher explained it to me when i was young. I always wrote down the numbers but forgot to define it. And so he would always ask me what i meant, cows, chickens, etc..... It stuck. He made it stuck, and it is important enough to stick Otherwise it is a brilliant video sir, has to be said as well.

So don't play

@@Playfulchemists oh I don't lol

:)

It's just basic chemistry, and it is open knowledge. Only a dictatorship would censor scientific information. Also making explosives doesn't mean using them to harm people. It might be illegal to perform these reactions but it really shouldn't be. Illegality makes it only worse and more dangerous.

5ml HCl 37%

@@Playfulchemists ok thanks! and Is the aqueous solution that you dropped onto the TATP at the end sodium bicarbonate?

Yes