In this video i am replacing the front wheel bearings on this old mustang skid steer.
Пікірлер
I've got a mustang skid steer with a bad steering / drive motor. Know any place I can get it fixed?
@herbertbell9438 Жыл бұрын
Depends on where you live
@Self.reliant Жыл бұрын
@@Self.reliant About a hundred miles out in the desert near Las Vegas. Vegas is the only real town near me at all.
@herbertbell9438 Жыл бұрын
I do not know anyone out there to help you out. But anu heavy equipment shop should be able to install a new motor or rebuild it
@Self.reliant Жыл бұрын
Where did u get the wheel bearing
@kurtsedler75612 жыл бұрын
I bought it locally at my carquest autoparts. There is a number printed on the bearing and they looked it up and ordered it in only took 2 days to get it.
@Self.reliant2 жыл бұрын
At chance you got part numbers for the bearing and seals?
@justaguywhocares4478 Жыл бұрын
I forgot the part numbers were in the replies to my comment
@justaguywhocares4478 Жыл бұрын
Ever gotten into a rear one? It looks like everything is below the tank.
@justaguywhocares4478 Жыл бұрын
So I did the rear a couple years back it's the same it's inside the tank if I remember correctly.
@Self.reliant Жыл бұрын
@@Self.reliant I'm sorry, I meant below the fuel tank.
@justaguywhocares4478 Жыл бұрын
Yes but you get access through the oil tank. There is an access door between the tires
@Self.reliant Жыл бұрын
@@Self.reliant that's way easier then! Thanks.
@justaguywhocares4478 Жыл бұрын
@@justaguywhocares4478 if I remember right that's what I did. First I tried to not open the covers and work through the hole but I dropped the washers in so the cover needed to come off and I went fishing. I should have just taken the cover off right from the start and saved quite a lot of time
I've got a mustang skid steer with a bad steering / drive motor. Know any place I can get it fixed?
Depends on where you live
@@Self.reliant About a hundred miles out in the desert near Las Vegas. Vegas is the only real town near me at all.
I do not know anyone out there to help you out. But anu heavy equipment shop should be able to install a new motor or rebuild it
Where did u get the wheel bearing
I bought it locally at my carquest autoparts. There is a number printed on the bearing and they looked it up and ordered it in only took 2 days to get it.
At chance you got part numbers for the bearing and seals?
I forgot the part numbers were in the replies to my comment
Ever gotten into a rear one? It looks like everything is below the tank.
So I did the rear a couple years back it's the same it's inside the tank if I remember correctly.
@@Self.reliant I'm sorry, I meant below the fuel tank.
Yes but you get access through the oil tank. There is an access door between the tires
@@Self.reliant that's way easier then! Thanks.
@@justaguywhocares4478 if I remember right that's what I did. First I tried to not open the covers and work through the hole but I dropped the washers in so the cover needed to come off and I went fishing. I should have just taken the cover off right from the start and saved quite a lot of time