This is how I fixed the door card for my BMW E34
COMMENT, LIKE AND SUBSCRIBE FOR MORE.
Description:
In this video I show you how the door cards for a BMW e34 and most BMW doors of similar nature from the 80’s and 90’s can be repaired if the vinyl has separated off from the carboard panel. This is not a restoration of the door as parts of it weren’t replaced but simply repaired to be functional again.
The purpose of my videos is to show what can be done using simple tools that can be bought easily and cheaply from your local hardware store or online.
Soundtrack:
Track: Will You Be Mine (feat. Karemann) - Broke in Summer [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Will You Be Mine (feat...
Free Download / Stream: alplus.io/wil-you-be-mine
Track: Soave - Vendredi [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Soave - Vendredi | Fre...
Free Download / Stream: alplus.io/soave
Track: A Song Named Roses - Broke in Summer [Audio Library Release]
Music provided by Audio Library Plus
Watch: • A Song Named Roses - B...
Free Download / Stream: alplus.io/song-named-roses
Track: Lucid - Metro Vice [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Lucid - Metro Vice | F...
Free Download / Stream: alplus.io/lucid
Track: Silence - Metro Vice [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Silence - Metro Vice |...
Free Download / Stream: alplus.io/silence
CAMERA USED:
Canon M50 with 15-45mm STM Lens
No Name Tripod
No Name LED Lights
Instagram: instagram.com/?hl=en
I did more or less the same job but sanded off the old glue residue from the door card. Threw away the vinyl and used instead real colored leather. Came out very nice and smooth.
Beautiful work my friend, real leather would look great
Thanks for posting this! In my E34 the door card vinyl on all 4 doors is just starting to come up and this was just what I was looking for!
Im glad the video can help, one thing i can recommend is when you take the vinyl off make sure the surface on the back and the cardboard is clean so the glue adheres as good as it can. Ive had both my rear doors done as seen in the video for a few months now and they are still in great shape
Great result, especially since you kept the original vinyl. However some details are hard to finish around the edges and bizarrely shaped areas because of the shrinked vinyl. I fear the glue won't stop the vinyl from continuing to shrink and that it will end up looking as before despite all you hard work
Gald you like the video. The glue that I used is quite strong so it should hold very well. Unfortunately there is no “like new” fix to this that im aware of. The only other option would be to get the series 2 doors where they hardly have this problem. I have had the doors like this for a few months now and no issues as of yet 😄
Перед снятием винила с карты, надо было греть феном, чтобы винил принял форму карты, только потом отклеивать и клеить по новой. Я так уже делал, трудоёмко, но результат лучше.
@@user-gj2vp8kc3s Bonne idée
@@user-gj2vp8kc3s So if you heat up the vinyl with hair dryer it gets soft? In the elbow area my vinyl is shrinked badly.
With contact cement, you can lightly spray with isopropyl alcohol to allow a medium to slide the vinyl into place. However, when I do this, I use 3M's 77 product. I line up the whole skin onto the frame, trace the desired location onto the frame and spray both parts of one corner, clip it in place like you did and start working towards the other side. That gives you workable adhesive where you need it and a form anchor where it's already lined up.
what's that cement's name ?
What kind of adhesive is good to hold the inserts in place, the place that I paid to have them put back on had them on, but eventually all inserts just came off.
I used a two part glue that gets applied to both mating surfaces, let it sit for about 20 minutes and then apply them together, its held up pretty well since. Some parts it has lifted a little unfortunately but for the most part its still very good
Hello and thank you for this video. How long did it last ?
Hello, its still holding quite well, it’s lifted in one section but its an easy fix, the main section of the vinyl is still holding well though
Using white letters would have been a bit better... ;-) Good video, thanks.
I know this video is old but at 12:13 you just snap that extra piece on - that's what I'm struggling with right now, that piece is hanging on by a thread and I don't know how to secure it any better - how is it designed to fit?
Hi thanks for watching, to be honest it doesn’t really snap into place without the panel being fitted to the door first, it snaps into place once on the door. It really isn’t a great design in my opinion.
Nice mate ! I have to do it for my e34 too... what type of glue are you using in this vioeo?
Hi mate, i forget the name but its a two part blue, if you’re in Australia it’s available from Bunnings. You spread it on both mating surfaces, let it sit for about 10 minutes and then apply them together and it holds really well. Just make sure the area the glue goes on is as clean as possible to ensure good adhesion
@@restotime392 right thank you ! Let's do it mine
I paid to have the inserts back on,as soon as they were on, they didn*t last long I have the 4 inserts.
😆😆
"Ибонько "
До ремонта было лучше!))) Херня получилось