How to Change Semi Tire | How to Mount and Dismount Semi Tire
2020 ж. 30 Қаң.
119 666 Рет қаралды
How to Change Semi Tire. How to Mount Semi tire. How to dismount semi tire. Highway tractor. Tractor trailer. How to change tire. trailer tire. how to swap semi tire.
Man, you have no idea how helpful this video is. Thank you so much for posting this.
Glad it helped man!
@@thisandthatwithchris1984 recently started working in a diesel shop about a month ago. They gave me no advice on how to set the bead. I had to use a bead blaster on 80% of the tires I’ve changed. Your little trick to roll them around has worked every time for me since watching this. Saved me a ton of time
@@SmithRoyal I feel ya, I also learned on my own. A Guy tried to "teach" me once, turned out he didn't know much himself...
This video was incredibly helpful, just started switching tires and let me just say your way of doing it is way easier. Less strain on my back for sure!
Your video was not too bad , but a few things I would suggest, since many tiremen don't work with new tires every day! There's no advantage of spreading lube on the sidewall, but should only be on the bead itself, (mounting lube should be anti rust/corrosion type) as you will pop the first side on and have only 1/3 to bar on the other side, (always remember, lube is your friend!) and detergent SHOULD be vegetable based! Flip the bars around next time, since the spoon side is for mounting The newer tool is fine in a tire shop, But Once the beads were broken, 2 bars were faster for me! Just a few observations from a retired mobile truck tire mechanic, after 34 years of working tires of all sizes!
Thanks for posting. This Video is very helpful.
Thanks! Changed my first tire ever. Worked pretty slick! 👍
Lubricate the inside of the second bead that is being installed . Without a tire cage do not inflate over 5 PSI . Always use a 6 foot remote hose inflater . Good video !
I just started doing diesel mechanics and this was so helpful thank you for making this video!! And for showing this method it was so great to watch!!!!
Thanks for the tips, I had all the tools and struggled , but your tips and method worked great!
Best tire mount/dismount video on KZhead.
Thanks for the video. You're a good teacher.
Very helpful video and thanks for sharing videos like this…👍🤟🤙💯
Great video.... Loved it......
Dude, that dismount tool is nuts, must make everything easier. Great technique, great video.
Thanks so much man!
Thanks man
What is that tool called that you used for dismount ?
@@desertoasislawncare8342 A gold bar
Thanks for this man. You are awesome. I’m a little guy and this helped me out so much. Again thanks for the help
Nice vid man you made it so easy thx
Excellent, I wanted to see the differences in the tire tools used. I agree the orange would be easier , excellent video
Great job!!!💪👍
Good job man. I learned a little bit from everybody.
Wonderful Video! Thanks !😊
Bro that's a great safety tip to prevent blowout and fatal injury.
you the Man ...sweet vid mr
Very helpful video mashallaha
Thanks help me alot
Just a side note. In reference to inflation while on the 🚚 as this method he says is "safer," as the rim cannot fly and kill u. Just so people know and are safe. The air pressure alone at 100-110psi on a zipper split (tire rupture upon inflation) has a equivalent of 12ton of force. Yes, Just the air pressure has that kind of power. It's like being hit by a truck. So even if it's bolted to the truck the dangers are JUST as high. Yes the rim can kill you, but most injuries and death are from the air pressure. Search truck tire zipper split and you will see what I'm talking about. FYI this is my day job. Hope this helps, Not trying to take anything away from this guy or his video. Just trying to help others be safe and add on to info. 🙏🙏 safety first.
At the shop I cage all tires, on road they all lay flat on the truck bed. Extended guage and Inflator is key....I won't stand near and uncaged recap. Been hit by 2 within 2 months.
This is a good man. Thanks for this video.
Great video man thanks for the help
Glad it worked for ya!
I learn alot from your videos
Great video thank you 👍
Thanks!
Very good my friend!
Like the way you explain learn alot
Thanks man
Great 👍 advice
Thanks is helpful been a while since I've done it so thanks..
You make it look so easy thanks
I just dismounted and mounted my first tire like this, in under 20 mins by just watching this video
Good job buddy!
@@thisandthatwithchris1984 Thanks to you! Been practicing and now I'm just under 10 mins. Great vid man.
@@abeh9177 No problem man, happy it helped. Do you have a dismount tool like mine?
@@thisandthatwithchris1984 Yes I do, I just started working at a tire shop. My boss wants to get me to dismount and mount semi truck tires. Got on KZhead and came across your video. Thanks again!
You guys sure pick the easiest, loosest tires available
Thank you so much
great video man been a while since i seen some videos from you
Thanks bud!
Great video, helped me a lot changing tire for the first time, thank you and God bless you
Thanks for watching, I'm glad it helped you!
Good job
Cool video i learn alo
Great job man! Thanks!
Thanks for watching man
I'm looking to get a portable air compressor for bus tires. They're 10R22.5x7.5 and inflate to 115PSI. Mainly for emergencies or regular inflation, so probably won't use it much. Any recommendations on size and CFM?
As big as you can afford
Very nice
Hi, can you use this demount bar with the orange handle you used in the video on regular car tires like size 195 R 15 or 205 R 16 or is it only for truck tires? Hoping to get a response soon so that I will decide wether to purchase one or not.
I don't think so
Nice vid love to see you post again. Still got the mk1 rabbit?
Thanks man, you bet I still got the old Rabbit
What size bars where you using
Probably the fastest I’ve seen some one do it
i got one question, why are most american semi truck tires so narrow? when compared to european semi trucks just why???
Is it posible to damage tire if I hit tire higher on the wall with that hamer?
hey boss i have stuff same as you also i just subs and following you now.
For semi tires like car tires does it matter which side of the tire is facing out or in? When Mounting it?
not usually with typical radials. usually only performance tires have a specific side. but it wouldn't hurt to look for something on the tire that says "OUTWARD" or "
No. It doesn't matter Thanks for watching
@@blitzwing9150 I believe his question ment do some truck tires have - Directional or are some Asymmetrical like some car tires and light truck tires are. Or are they all universal. No big 🚚 tires do no have direction or Asymmetrical like some car and light truck tires have. 👍 be safe 🙏
5lbs air pressure is recommended before rolling into tire cage.
Its which country
What if they have really nice rims? How will you prevent the face of the rim from being damaged or scratches?
Put a rubber mat down
Rubber mat, cardboard. Also you put a rag between the bar and the rim right before you out pressure on the bar. And continue to adjust rag/towel every bite u take.
Anyone else here for 4:15 trying to get that damn bottom bead 👋 not too bad for 22.5 but hard to get on the bigger 24.5's.
11:22
هل يمكن إلقاء عندك عمل معاك ؟
What's name of that fancy tool and how much does it cost
I have heard people call it a gold bar. I think around 600 Canadian Dollars
Hello Hello, brother. What's up
Can you nose that on 4x4 wheels
Yes you can I do my 4x4's with just two bars
A semmy?
I prefer to use bars
Bro,,Where shall I get that crowbar ???
possibly Princess Auto. Tire supply companies could order it
Sure show it with a new tire that was just mounted . Should show a old stiff tire that is stuck to the rim
I deal will it daily buddy, i promise it still works fine. Next video I'll use a nasty tire and rim. I just used what I had in shop when someone asked for a video.
You're using the sissy bar LOL
This is my job. Can you employee me?
I’ve been offered a job at Ryder doing this for 20/hr. Is it worth it lol?
Hard on the body
I know I wouldn't do this for 20 bucks an hr. I charge by the tire.
@@thisandthatwithchris1984 lol and they wanted you to wash trucks and other shit 🤦🏾♂️
You dont even know how man lmao 🤣 ... Been doing this for years .... I would be on my 3rd call bye time you get the first bead off 🤣🤣🤣
Gift us grasshopper, make a movie and show the world. I don't do this for a living and I could care less how long it takes. Hahahaha Can't wait to see you get er done on camera.
can you make a video on the rabbit?
What kind of video?
@@thisandthatwithchris1984 i dont really know, maybe just an update or something?
I'll see what I can do!
Mm don't know 😮
Shit. I don’t happen to have a bead axe. But I do have those vevor tools .
You can use other things and still get the job done. Sledge and a block of wood... ect... use your imagination a bit. If There is a will there is a way brother.
Haha lol i hate using any other than a bar. Put a bran called elephant ear wax put a small amount of it in a a bottle with water i cound dismont an mount a tire in less than a min
oh thanks for the info!
Why did he use 2 bars to mount the tire when you only need one. It makes no since. He made the job harder.
@@thisandthatwithchris1984 this is a cool tool but I only use the when I’m dismount more the one tire.
Bb
Ehh if the tire blows on the truck you're still gonna get severely injured if not killed.
Isn't that easy, you can pull a muscle in your back in a beat.
"Semee" 🤦🏻♂️ Great lesson but you're working too hard. They make a slide hammer gadget to break beads with
Yoyoyoyo i just finished the video wtf? Man why dddddude come on your saying you hate your back from hurting bro your using more of your back like wtf! Look i may not have a video but i can teach you by just listening what i have too say. First not going to tell you about how you dismount the tire your right everyone has there way of doing it but mounting it can be so much easier flip your bar around and use the hook you only need one bro just one not 2 bro bro uou could slip like that if you aren't careful just use the one bar it take like 10 seconds to do it and use that same bar flip it around using the hook to put it in takes about 5 seconds too do so f that hammer good buy lol
im faster with ken tool bars those tools are overrated
What are you talking about man? That's what he used here
Do not break or mount the bead with that hammer/axe thing, you will be compromising the integral structure of the tyre, it can be costly & dangerous. Also, when mounting the tyre, you’re using the wrong end of the levers.
It's a dirty job.
i used to bust tires for a livin, i quit after my back started bothering me. tough job