JETech Screen Protector Installation for iPad

Did this a couple days ago, I'm 68 and was a little afraid because my fingers don't work like before ... I got everything out of the box and clicked on this video as I went along ... Gee, Everything was actually simple. I had to lift up the protector a couple times to get some bubbles out and finally everything was Great.

I might add, make sure the notch cutout on the protector is in the proper place, to avoid covering the camera on the iPad. I am about to apply a new protector on my iPad and I noticed that you run your finger down the center and this made the protector cover the screen. Just like magic. Great idea.

This is actually a fantastic video. I just bought this protector for my kid's iPad and thought I'd see what all these stickers in the box were for - what an easy to understand, well produced video. Great job whoever thought of doing this. Two stickers to align the long edge to the iPad screen is such a simple concept but wow did it make a world of difference compared to trying to just eyeball it.

The bubble going away is so visually satisfying !!

JETech just earned a life long customer out of me. First off the video was great. Simple but step by step clarified the steps on the instruction sheet. The product itself is a steal! I got the protector and it came an extra set. I also got a protective case similar to smart folio. With both these products it was only $25. That’s like a quarter of what apple would have charged.

no matter what unless very lucky, that one dust gets through at a very bad place. I installed as shown in this video for my mom's ipad pro and everything went flawless except for that one s.o.b dust. I don't want to lift the screen in fear of breaking it for just one very small bubble. Good job Jetech, very happy with the product. Now I'm relieved that if my mom drops her ipad face down, I don't have to worry about screen cracks or scratches. Her ipad is precious to her.

Best screen protector installation I have ever used. The first screen protector I have used where the majority of the air pockets just evaporate with a simple finger swipe.

Thank you so much. Didn't bother to read instructions, just came straight to KZhead.

This was extremely helpful! Great video! I highly recommend anyone who buys this JETech product to watch this for instillation!

Easy as can be. Agree that video helped...a picture is worth a thousand words...and the product is extremely clear. Love it! Will remember this brand.

Amazing results. Thumbs up. Thank you. This is my second go around and I wish I done this the first time. Now at least I have a back up screen because they give you two panes of glass in case you mess up.

I recently bought one of your protector for my ipad, very easy to install, you have earned a new costumer❤

Thank you so much. With your tools and this video for the first time in my life I have a screen protector on a screen straight and without bubbles or dust or crumbs

Incredibly helpful. Got it on perfectly my first try. The protector also doesn’t create any problems for the receptiveness of the pen, as I can still draw on it just fine with it feeling as smooth as before I even put the protector on. Love it so far.

Excellent video, so easy to follow. Brilliant product too.

Big thank you! Waited a week to open my iPad cause I knew I had to put a screen protector on which I’d rather have a beating. Everything went smooth!

Thank you so much for this instructive video, I followed the steps and the application went well. It was so handy to have this.

Attach to the back. Lol 💀 without the video I wouldn’t have been able to do it

Excellent video - helped me to fit this perfectly.

Thanks for the Installation Video. This is called good customer after sales service. Thumbs up!

Thank you , the instructions was EXCELLENT 👍

This video is awesome!! Thanks, way better than the booklet!!

After I removed the protective screen and started putting the glass film down on the iPad, it began to stick before I had the film all the way down. It did not rest lightly on the iPad without sticking, as shown in the video. As a result, once it finished sticking, there were two big air bubbles. I managed to lift the glass film from one corner, and lifted enough so that the bubbles were gone. I replaced the film more carefully, and the sticking spread evenly as shown in the video (though starting at one corner rather than at the center), and sealed with absolutely no bubbles. It is perfect. This is the first screen protector that I've managed to attach to something without air bubbles.

These cases are really good 😌 thank you for the vid

This worked exactly as shown, I’m so happy! Thank you 🙏🏻

Demo was really helpful, am able to fix the protector seamlessly.

This video is awesome. So easy when you carefully follow each step. Don't even bother looking at the printed instructions that come with the product - just follow the video and pause it as you install the shield. Great product! Thank you! Saved me about 75% by not going to Apple for this!

WOW it went on perfect and on the first try!!! I honestly couldn't be happier. I did have a rogue circle in the middle for a bit but I used my finger and pressed hard to run it out. I also got their case and it doesn't affect the protector at all. All the babies whining an amazon are just not willing to spend 5 minutes and follow the directions. If you insist on doing it in under 30 seconds then maybe a screen protector just isn't for you!! lol I think the biggest trick is attaching the hinge stickers. Find the perfect alignment and hold it down firmly with a thumb and press the hinge from the bottom up FIRMLY so it sticks and don't just swing the sticker up all haphazardly. This worked just as good as the tray method for me actually. I will be buying Jetech stuff from now on since I paid alot for 2 Spigen protectors for my phone and received one with marks LOL (at least one worked but still)

Thanks, very clear, worked well in putting the JETech screen on my new iPad Pro.

I love this product! Fantastic and so simple to install..

Excellent product! Fits perfect!

Good job! I hate doing crap like this because there always seems to be a problem. This worked! Thanks!

thank you very much for this video, without it I would not have known how to put the screen protector on my ipad🙏🏻🙏🏻

This Video help me alot. Thankyou very much!!!

Great video... a picture is worth... yeah, you know! Thanks!

Thank you! This video was helpful to follow to put my screen protector on my new ipad.

What is the name of the music used in this? It is very soothing...

Ahh! Thank you this help me so much! The screen protector works really well!

this was so helpful!! 😁

Unfortunately if you try to lift it at a corner with your finger you can accidentically peel of some addiotional film on it that prevents the corner from adhesing completely. Still better than getting scratches on your screen, but I wish I could make it disappear. Whatever, if I got money left after some time I will buy a new one and replace the old one. At least the authentical feeling of the actual screen was matched pretty accurately

How do u get bubbles out after put protecter on

I ended up with a couple of bubbles I couldn't get rid of. I wonder how many takes it took in the video for it to work so well as shown. :/

Is this the same method for iPad 10th generation?

Thank you work’s wonders

Thank you! This helped so much!!

Wow they made this easy lol

Make so much easy to put on Thank you!!

great video, saved me of a lot of trouble !

Thank you for the vídeo! 😁

Good product but the stickers provided arent strong enough. Glad I bought a 3 pack because on the first attempt the hinge stickers came off as I was sticking the cover to my phone

Thank you. This helped me get a perfect fit.

Slick. Works great!

It's giving me some subtle wobbly lines when I draw slowly, but people told me is natural since the tip of the pen is further away from the screen than what is desirable due to glass thicness. It's not very exagerated, but sometimes triggers me a bit when working with it.

I have a Otterbox Defender Pro case for my 8th gen iPad which for some reason Otterbox decided they were going to go with a screen-less design. ???? My question is, if I put this screen protector on my iPad will I still be able to use the inner plastic shell of the Defender case? How thick is this piece of tempered glass?

Thanks for showing me I love the process.

Thank you my friend..you help me a lot.

Mine did not go smoothly. It started to stick when I flipped it over even though I was very gentle. I have bubbles that won’t come out. What do I do?? Please and thank you

Can a iPad gen 7 screen protector fit an iPad gen 6? Accidentally ordered iPad gen 7 protector 🤷‍♂️

Trank you! Loks like so easy! ❤️💜❤️

What a pain. Two air bubbles just won't come out. One near the edge that I can live with, but I'll see it forever. The other smack dab in the middle that appears to be a flaw in the glass. Lovely video. If only the results were the same. Multiple tries just made it worse. I took the freaking piece of crap off my iPad. What a waste of money and effort. Sorry. Love the idea. Hate that it doesn't work for me.

very nice thanks for the guide

very good, didnt have any problems doing it at home :)

Thank youuuu! This was super helpful!

omg it worked! thank youuu

Apparently everyone is as smooth as this video. Don't be fooled. You'll get air bubbles and dust underneath. Doesn't ever happen as shown. But if you want to protect your screen this is the best way. Just gotta put up with it

Perfection

I just installed this on my iPad and phew no bubbles

thank you

The Screen protector sticker to lift the shield is not strong enough to do lift it like the way on the video.

This video was definitely helpful!!! Thank you so much. I followed the instructions and everything went perfectly fine. I tried it once and it directly worked out. I am super happy :)

Thank you soo much...

Thanks!

Does the Apple Pencil work with this glass ?

I going to buy JETech Paperfeel Screen Protector for my iPad.

First one no problem. Second one....did not work bubbles.

Do you need to clean the screen before hand

Nifty Chinese ingenuity with that glass that "swarms out" to flatten itself all over the iPad pane

Did all this and have 5 giant bubbles. Garbage. I attached the stickers on the side and when I ready to lower it the screen came off then making me do it manually.

Is this platic or glass?

Thank you!

Please somebody help me is this a tempered glass screen protector ?

I cant remove the air bubbles

is this anti-glare?

To reduce the chance of dust bubbles, turn on the hot shower in the bathroom. The steam will keep the dust from becoming airborne. U don’t need a sauna; just high humidity.

Apparently I am the only person having issues with this product. There is a place on the corner where the screen protector meets with the ipad case and it leaves an air bubble there that will not go away. After taking it off and trying to place it on the ipad so that the air bubble isn’t there anymore there are a ton of air bubbles that tape won’t remove. So frustrating!

Take time removing the dust. I cannot overstate how aggravating even one tiny speck of dust is.

I wonder how many tries they needed until there was actually nothing trapped underneath the screen Protector

The orange cloth it came creates even more dust. Not good material

Damn so pro lol

I am still afraid to do this, gonna take it to my phone guy and see if he will do it for me. I will do it wrong, I am sure.

My face seeing the air bubble just leave by themselves. 😧

if you come to India, i will help to visit anywhere, like a guide ...for free

When I try myself 1 billion bubbles

Would be helpful if he didn’t start with the iPad laying upside down

got the wrong side with the stickers -_-

Save $40 😁 if you buy online it's only $6

Thank you. The instructions this item comes with is useless!

I failed so bad

Honestly why wouldn’t you talk and walk through this?

Me watching this video. Well that’s not so hard. Actual me MOHER FUCKER!! How do I fix this ???