DMT Guided Sharpening with W6F Diamond Whetstone
2009 ж. 26 Нау.
101 556 Рет қаралды
Learn how to use the Aligner Blade Guide with a DMT Diamond Whetstone bench stone to achieve professional sharpening results.
Check Us Out!
www.dmtsharp.com
facebook.com/dmtsharp
I use my DMT stones in my Worksharp Elite with a stone holder. It works like a charm.
Wow! That simple huh? Purchased one of these in addition to my Tormek 8. I'm excited to use this and getting some crazy sharp edges.
@gerysc Hi! The clamp material is a 40% fiberglass reinforced engineering polymer guaranteed not to scratch or mar your knife unlike some other metal clamp styles. Thanks for choosing DMT!!
I have a kukhri and i was wondering if it would work for that?
Will the guide work well with a stone?
dmt i dont see revew for dmt 8000 grit 8 inch stone?
@garytelecastor Gary - I checked with Stan he says -"Yes, just place a shim adjacent to the tri-hone that compensates for the height differential." I hope this helps.
whats with the audio? recorded on a string and can?
Much better solutions already exists. This one seem cumbersome
Good try, but a 3 notch fixed adjustment will work with only stone you sell with specific thickness, not with other stones with different sickness.
@platinum243125 Hi! Yes you can. at approximately a 15 degree angle
@platinum243125 yes of corse just be carful as not to roll the edge
how can i calculate if the stone is higher then the original of the set?