KZhead
Автокөліктер мен көлік құралдары

Strange noise while driving, need to replace Axle Differential.

Mechanic Steve
2023 ж. 11 Мау.
1 135 094 Рет қаралды
Жүктеу

Strange noise while driving, need to replace Axle Differential.
#mechanic #automechanic #automobile #cars #trucks #restoration
Join as a member to support me : )
/ @mechanicsteve

Пікірлер

  • A lot of people criticising these guys but they’re not working in a main dealership air conditioned workshop and they need to turn these trucks round to earn, yes they’ll be back in for more repairs but that’s the way their world works, I’d say they were good mechanics working with what they have and improvising to get by with what they’ve not got.

    @MayorofDipshittery-lq7if@MayorofDipshittery-lq7if7 ай бұрын

    • No criticism here. I have a great deal of respect for the gamut of tradespeople seen across many areas of expertise. Some are sitting on their heels on a dirt floor near an open doorway for adequate light! Much respect!

      @markgarland9000@markgarland90007 ай бұрын

    • That's how it was on the strip mine jobs, you worked on it where it broke.....Hurry up, Production production production

      @sargefreedom1578@sargefreedom15784 ай бұрын

    • Amazing Talent

      @fanieduvenhage3947@fanieduvenhage39473 ай бұрын

  • Famous last words.."oh no..that drain pan is plenty big enough!"

    @markgarland9000@markgarland90009 ай бұрын

  • Maybe in that part of the world sand is a lubricant.

    @thhall459@thhall4597 ай бұрын

  • There's bound to be dirt all over that input seal after everything was handled that way, and yet the cover and input yoke go on without any cleaning being done. Seeing the whole process makes me think it's possible that dirt also may have been transferred to the inside that cover during handling. Any grit that finds its way inside will most likely cause damage later on. Crappy workmanship like this is the result when management demands speed and not attention to detail, or when the mechanic himself either doesn't care ("hey, it's not MY truck") or just doesn't know any better.

    @ericl2969@ericl29697 ай бұрын

    • Spot on. Also given this transfer case has no internal filter, all that dirt will remain inside and keep doing damage until something wears out again and the same guy starts the same process all over.

      @mrtopcat2@mrtopcat26 ай бұрын

    • Or simply, the customer is cheap

      @SevenChanger7@SevenChanger75 ай бұрын

  • The design of that rear is a direct rip-off from Meritor. That's what the Chinese do....

    @truthbetold2914@truthbetold291411 ай бұрын

    • Yeah but they can’t copy QUALITY as evidenced by this Grenaded POS 🤣🤣

      @nordicpride9708@nordicpride97087 ай бұрын

    • Dude, Dongfeng CV has a joint venture with Dana.

      @TobenyChen@TobenyChen6 ай бұрын

    • @@TobenyChen What product line are you referring to? You can’t compare cv shafts and drivelines that are on Toyotas in north America to parts that are sold to auto parts distributors. There’s different product tiers for quality, OEM being the highest. I’ve never seen Dana CV shafts sold at any auto parts store anyways. The info would be good nevertheless 👍🏻

      @nordicpride9708@nordicpride97086 ай бұрын

    • @@nordicpride9708 Dongfeng Motor Corporation Group has a joint venture with Dana. All the front/drive/tag axles used on Dongfeng-brand trucks are from Dongfeng-Dana JV. Most of Chinese trucks are pioneered from older deaign of Styre/Benz/MAN, but DF is an absolute outlier to choose Cummins/Eaton/Dana to work with. That dude implies that someone is "stealing technology from American firms", and that really makes me sick.

      @TobenyChen@TobenyChen6 ай бұрын

  • If I worked on that, there would be a few extra parts laying around after I got it back together. 😂

    @scottmatthews172@scottmatthews1727 ай бұрын

  • You forgot to fill in lubricant

    @axelerat0r@axelerat0r11 ай бұрын

  • Bravo 👍👍

    @carlo4256@carlo42567 ай бұрын

  • Si è dimenticato di battere i fermi del dado 😢

    @claudio230379@claudio23037911 ай бұрын

    • Und nicht nur das! Elende Pfuscher!😢

      @marcokrug4245@marcokrug42458 ай бұрын

  • Weeeeeee! Glad you are not my mechanic!

    @JohnBoyDeere@JohnBoyDeere7 ай бұрын

  • I never criticize these people. I've had to work overseas. You work with what you have period. Do the best you can. Get it going

    @wrenching5483@wrenching54834 ай бұрын

  • Epa OSHA and the city regulations dept would go crazy seeing this

    @jesusyeshuaelelyonelshadai6295@jesusyeshuaelelyonelshadai62958 ай бұрын

    • why

      @wannawan8431@wannawan84318 ай бұрын

  • The squirrels doing the commentary in the video make it so much better.

    @TheMrDarius@TheMrDariusАй бұрын

  • After all that work, I just didn't have the heart to tell him about the zip tie on the drive shaft.

    @vincewilliams5219@vincewilliams5219Ай бұрын

  • Гайку не застопорил внутреннюю

    @rinji_ff8587@rinji_ff85878 ай бұрын

  • I hear those strange noises too. I think he ran over an 👾👽 alien👾👾👽... Or two.

    @johndunn9819@johndunn98192 ай бұрын

  • Qual a dificuldade pra drena o óleo primeiro né...

    @juarezsantino9795@juarezsantino97957 ай бұрын

  • Mirando detenidamente. El diseño de esos diferenciales está mal calculado ya que tiene demasiadas piezas inesesarias y están muy expuestas al desgaste. Nada de comparación con las marcas Eaton. Rockwell. O hendrixon

    @josejoaquincubillosquevedo1500@josejoaquincubillosquevedo150010 ай бұрын

  • He forgot to fill the gearbox with new lubrication oil 💁‍♂️

    @Abram_Israel_4235@Abram_Israel_4235Ай бұрын

  • ❤❤❤❤❤❤❤❤

    @user-rw6lo6yd7w@user-rw6lo6yd7w7 ай бұрын

  • I prefer this guys over the primadona's😂 from the trucks dealer shops who perform the soda pop machine every 10 min on my expense......

    @romeolanga4387@romeolanga4387Ай бұрын

  • 👍👍👍👍👏👏

    @franciscowashington2155@franciscowashington21559 ай бұрын

  • I am appreciated to you much

    @bokitajaba3646@bokitajaba36464 ай бұрын

  • Mantap

    @user-er1kl4px5o@user-er1kl4px5oАй бұрын

  • 👏👏👏👍👍👍👍

    @samersamt1666@samersamt166611 ай бұрын

  • That nut was not bent in to get locked in to the shaft, no torque, very dirty job. But hey it's not mine.

    @braccoo@braccoo3 ай бұрын

  • Гайку на ведомой шестерне не законтрил😢

    @user-6x6truck@user-6x6truck3 ай бұрын

  • Well….it definitely was not low on oil.

    @76629online@76629online7 ай бұрын

  • Too much oil against the soil 😮

    @markfosseth8047@markfosseth80472 ай бұрын

  • The dam oil ! Yoy got put it back, and a new one the old looked dirty as hell.

    @freedom_aint_free@freedom_aint_free7 ай бұрын

  • pero éso tiene que ser del diferencial de un camión o autobús ambos de gran tonelaje porque que yo sepa ningún coche tiene las piezas tan grandes ni de ése tamaño

    @jesuspm7521@jesuspm75219 ай бұрын

    • Seguro es un camión de doble o triple rodaje. El tamaño corresponde a la capacidad de carga y trabajo.

      @inkconceptualart8261@inkconceptualart82616 ай бұрын

  • Buona giornata

    @rachidafif858@rachidafif85811 ай бұрын

  • По резьбе молотком вообще супер

    @user-vt2nw8bt1v@user-vt2nw8bt1v7 ай бұрын

  • See..... poppen wheelies and smokin the tires and shit... I told them boys 100 times if I told them once...

    @bugbomb8048@bugbomb80482 ай бұрын

  • Man !! I bet that gear oil stinks !!😊😊😊😊😊

    @arthurmchugh5184@arthurmchugh51842 ай бұрын

  • One chipmunk said to the other….

    @mooch6666@mooch66667 ай бұрын

  • Poor maintenance by the owner.

    @MLBBCYCLOPS@MLBBCYCLOPSАй бұрын

  • Looks like reason for failure was somebody thought hydraulic fluid good enough, quite often black.. and isn't it's too thin, overheat to lose tempering of the metal.. needs the 90 wt. Thick oil to deal with the heat.. so metals don't lose tempering and overheat.. that's like hydraulic fluid thinness..

    @KevinDShort@KevinDShort3 ай бұрын

    • Shouldn't fail again then.. be back reliable..

      @KevinDShort@KevinDShort3 ай бұрын

  • Es lamentable como derrama el aceite por todas partes 👎

    @josemarmolejo9462@josemarmolejo94622 ай бұрын

  • Did I miss something? Did he put a new pinion seal in it?

    @onetransmission7871@onetransmission78714 ай бұрын

    • Don't think so!

      @wesleycooper2647@wesleycooper26474 ай бұрын

  • You mechanic not push down the lock tabs on the nut on the second heat, will have problem later, not good mechanic.

    @myfeeling4you248@myfeeling4you2488 ай бұрын

    • Second gear

      @myfeeling4you248@myfeeling4you2488 ай бұрын

  • Howo 38o bile moga asamen sa sera

    @user-rf8fj5fo4d@user-rf8fj5fo4d10 ай бұрын

  • Me desculpem, serviço bem aporcalhado ,sem o minimo criterio de limpeza .

    @celiosilva8655@celiosilva86554 ай бұрын

  • Tunafanya vzr ila kz inakuwa chafu huoshi vitu vichafu

    @geraldlyimo2859@geraldlyimo28597 ай бұрын

  • Какя разница с грязью или нет ? Все равно саоро разбирать , с таким ремонтом ни когда ездить не будешь

    @YuriKovyazin@YuriKovyazin4 ай бұрын

  • Почему сразу не сливают масло перед разбором?

    @user-6x6truck@user-6x6truck3 ай бұрын

  • What was wrong with it?

    @NeutronX101@NeutronX1017 ай бұрын

    • Everything

      @SlonBabar@SlonBabar7 ай бұрын

  • Some dude claims that "American technology" is once stolen. That is pure ignorance. This is the inter-axle differential from a rear-front axle on a Dongfeng truck. And Dongfeng CV buys axles from Dana, not Meritor. Would you claim Dana steals design.from Meritor?

    @TobenyChen@TobenyChen6 ай бұрын

  • There is a drain plug for a reason, pretty sure not gonna drain the whole thing, but is not gonna make that big of a mess. And even before starting the job, clean up the the differential before tearing in a part, all the dirt will find it's way inside the case, and as we know, cleaning is one of the most important things in these types of jobs.

    @inkconceptualart8261@inkconceptualart82616 ай бұрын

  • Cowboy 🤠

    @adrianwalker3641@adrianwalker36418 ай бұрын

  • Stop speeding up the videos

    @Earl940G@Earl940G7 ай бұрын

  • 👏👏👍👍🔩🔩🔧🔧👌👌🇧🇷

    @paulofrancisco565@paulofrancisco56511 ай бұрын

  • 돌팔이

    @diablo34739@diablo34739Ай бұрын

  • Гайку не развальцевал.

    @user-ty4zs4vp6s@user-ty4zs4vp6s8 ай бұрын

  • Гайку то на коротком валу не закернил!😮😮😮

    @user-cv6tq3qe4v@user-cv6tq3qe4v7 ай бұрын

  • Next time drain the differential properly via the drain plug it much easier..that way the oil makes it into the pan not all over the ground ya hackers...beatin on the pinion shaft after the housing is loose...smashing the housing and the gears...wouldn't let you work on my kids bicycle

    @jimsmith3258@jimsmith32585 ай бұрын
KZhead