I made my 4x4 $500 offroad buggy unstoppable!
I 700cc 2 stroke swapped my $500 chinese sxs buggy! The thing rips and today we finish up some stuff and go do some ripping on proper jeep trails!
If you’re ever injured in an accident, you can check out Morgan & Morgan. You can start your claim in just a click without having to leave your couch. To start your claim, visit: www.forthepeople.com/Vasily?s...
➥ 🔥CHECK OUT MY MERCH: tinyurl.com/w3a947kp
➥MORE DESIGNS: apmetalartapparel.com/collect...
➥MY WELDERS: usaweld.com/?ref=hvpoab1dg65
➥ CUT OFF WHEELS (Code: VASILY 10) tinyurl.com/h44bzwrd
➥ EVOLUTION Power tools (Code: Vasily5) tinyurl.com/3j5kt4pm
➥LASER CUTTING SERVICE: bit.ly/vasilybuilds
➥PATREON: bit.ly/47gB9Pa
➥ SECOND channel: tinyurl.com/yw8csmw8
➥ PAYPAL: tinyurl.com/3vck3jnx
➥ INSTAGRAM: tinyurl.com/yvaujywh
➥ 🎵 Music: tinyurl.com/zze5jz4n
For all inquires email me vasily1fab[at]gmail.com
I upgraded this buggy even more: kzhead.info/sun/jcywnsWspGiXh4k/bejne.html
The Jeep is a Cherokee XJ for the record.
bout to sue erry body
Is he welding aluminium to steel??? Can you even do that?
😂😂😂
@@VasilyBuilds Where in TN are you located?? I live here myself.
Good to see a sponsor. You work your ass off for this content and you deserve to be compensated for your hard work.
Is he welding aluminium to steel??? Can you even do that?
I was thinking the same thing! typically I don’t care for them. But this time I was glad to see it!
@@tonya9614 It’s always a pinch to have to plug a sponsor but if the sponsor is respectful, and is helping you provide content, it’s all good.
@@millroyboy07😂😂 deserves , people speak so privileged
Note to self: add gas peddle, fenders, more panels for cockpit, snorkle for air fltr. Finish 4WD & paint. Ready for Summer Rippin!! 😎👍
And reverse gear 😂
Pedal
@@funkytransport He's going to add peddles for when he runs out of gas. Personally, I prefer the Fred Flinstone approach. lol
That things a Beast!! I cant imagine in 4 wheel drive, that thing will crush the dunes!!!
Is he welding aluminium to steel??? Can you even do that?
Fuel is coming the gas cap. Another good video by my master craftsman Vaslie.Vasile. 10:24
@15:45 with that power level understand suspension is of great importance. It can save you from getting hurt. Rock on young fella
Nice I ended up polishing the same style turd you did. I ended up putting an engine from a 2004 Suzuki LTZ 400 quad. The buggy used to go 40 mi an hour tops downhill now it does 70 up hill..
Glad to see someone thinking about protecting themselves from coolant. I’ve seen so many builds of different vehicles that looks deadly to the driver WHEN the coolant eventually pops. Good job.
Agreed, especially the buggys / karts with the radiator set at an angle above the engine, right behind the drivers/ passengers head.
09:06 put 5 times the recommended amount on the bottle of Fuel Stabiliser when you go for your last run before storage. Fuel up to top of tank with same ratio and park it. Won't ever empty bowls or get gummed up carbs again. We do this for the winters up here in Quebec, Canada. Never had a golf cart or sportbike give me trouble in the spring. Been doing this just over 20 years now, was an old timer that clued me in to this trick.
sounds good. I try to run the bowls dry before i park it. But I always forget
This build is wicked! Thank you for getting back to this
I absolutely LOVE this little buggy! Nice work, brother
Hell yeah bud I'm stoked to finally see that buggy hit the ground running! When I least expected it too lol. Nice build overall And that Banshee bike is nasty AF! Keep on building cool shit! 💪
I would consider making some fenders like the honda odyssey buggy has so you aren't covered in mud all the time and getting hit by whatever the front tires kick up. Awesome build!!! Just subscribed, can't wait to see it completed in all its glory!! Keep up the hard work!
And now I know for sure that a 2 seater can be upgraded this much. Thank you. Just started looking at some in the past week.
One sick little buggy!!! Going to be insane with that all wheel!!!
...You're a beast with it! ...😊👍👊
Glad to see the buggy return!
Wicked cool buggy!!
Dude......FENDERS !!! hahahaha !!
The build looks epic! Keep doing what you do 👍‼️
Build a couple of snorkels and put a filter box on the roof to keep it from trying to suck in water
Hell ya let’s see that boy fixed up
Love that temporary gas tank
It's nice to see you're not crashing into neighbors' houses and breaking bones anymore with Chinese buggies. Let's keep this pattern going, lol.
Glad you could use the harnesses! I’ve been waiting for an update on this project. I think it is what I ultimately wanted frakenbuggy to be- so pumped to see how it turns out. Keep up the good work!
👍👍👍
So cool to see your metal fab work, it's very impressive
Morgan and Morgan is so fitting
You and Chris got my building a crossfire with a 670 and Polaris hlnr transmission same stage you are. Need to go back and finalize some odds and ends
The easiest way to reverse is a PCM off a newer Polaris sled. Around 04 they started building all 2 stroke sleds with electronic reverse. Meaning you start the sled, hit a button, the engine shuts down and restarts running backwards. Instant reverse. 2 strokes run as good backwards as forward.
NOICE!!!!!! Love that you went back to finish this beast!
Congratulations! You've officially created the 'Hulk' of off-road vehicles. Just make sure it doesn't start smashing through traffic lights!
Best shake down this week! Looks dope. Def "vasily-it"
Bigger tires,lexan windshield,and 4x4 oh don't forget SNORKELS:-)
OUTSTANDING JOB YOUNG MAN
Thank you
I think some bigger shocks in the back might help 😂
Dang that thing is sickkkk
I’d like to see you make a good belt cover and nice water proof air box so water doesn’t ruin it and get the awd working, love the stuff you build
You have the COOLEST set of Frankenstein toys😍😍😍😂😂😂👌👌👌
Do it! Awesome result for a build you weren't real hopeful of. Sometimes those cheap agricultural Chinese products are just the ticket! Some better enclosure for sure!
You have put in a ton of hours buddy keep pushing
Looking jacked and confident man, Love it!. Badass little rig there. KX 500 is SICK
Bought a sxs last year ! I'm hooked 😅
your neighbors probably love hearing that thing
My Favorite project. Keep building it!👍
Those Jeep tires were racing slicks 😮😮😮
That’s like 1400 cc of 4 stroke.. 2 strokes rule!!🔥🔥🔥
That thing is bad ass and when you get the 4+4 all hooked up that thing's going to fly in the 4+4 launches are going to be serious you're going to love it
Absolutely nutty!! Sound sick
Very nice builds and 2 stroke soundtrack is epic ! Make sure event marshalls know its a gas tank and NOT a fire extinguisher anymore dude 🫢
You can use an air nozzle on other areas of the metal to prevent the warping😊
As the video starts..... I thought for sure you would be closing in the front, maybe adding fenders to stop (limit) flying dirt, water, mud.... looks like a fun ride.
Looks like a blast to drive!!
This things sweet! I found one of these for $1,000 but haven’t bought it yet. Going to try and talk them down to $500. You should gusset or weld the back of your harness mounts. And your pull cord needs another loop in it to fully retract the cord.
Might want to relocate that fuel tank. Having it mounted so close to the exhaust with fuel spitting out the vent might give new meaning to "coming in hot!"
Get a Polaris snowmobile voltage regulator and a rectifier and you can turn the AC output to 12V DC...
Bro you are living my dream!!!! Who needs to waste 30 + grand on a rzr when you could just do what you did!!! Very impressed and awesome to see how far you have come
How are you doing vasily, I’ve back after A long time I used to watch you as a kid since the old blue China 670cc buggy
Snorkel,reverse, and Fenders will be nice.The bike sounded good too.Now about the 85cc...I'm running,uh close on my Motorized bike.Shhhh.That's what you were doing when I found your channel.Now 500 c isn't enough..lol...Keep on building Vasily !
Right on
Should have bolted in the center part of firewall so you can work on primary clutch without removing the engine. Those twins come to life w a good clutch setup.
Is he welding aluminium to steel??? Can you even do that?
@@EbonyPope he wouldnt be welding aluminum to steel. Hed weld steel tabs to the steel, drill holes in the aluminum and bolt the aluminum to the tabs. I believe thats sheet metal anyway. Aluminum isnt cheap but would be much better at blocking out the heat from the engine
Bro I’m so pumped about this video!! I recently started working on a project similar to yours! Hopefully it turns out just as good!! Keep it up dude!!
you should invest in some cleco's. They would save you a ton of time
Nice work that thing is cool rubs good be careful bud
Badass side by side buggy
I admit when I first saw you I was like this kid will never make it but your bills just get better every time much respect
Looks like you will be welding in so more panels 😂 but for mud this time
Def want to see this keep going, got a tomberlin 150 frame and a Honda Silvering engine. I want to build something like this, wish I had the skills this man does!
Aint no way they sponsored lol 😂 it’s great I see them highway signs Morgan and Morgan
Bro, nice job!!! A snorkel and maybe a skid plate should be added. You have a bright future ahead of you!! Great video
@14:27 700 2 stroke converted to 4 stroke is 700 X 1.75 = 1225cc
Insanity at its best! Heck yeah!!!!
I'd love to move back to Tennessee in a heart beat
Sounds great
With the extra weight u mite not have to touch the clutching. The extra power mite cause it to over rev the clutch weights but the extra weight of the bike will pull it down
Hey man cool idea put an extra long pull string on it and have it run up to the center of the roof that way all you have to do it strap in reach up grab the pull start pull down and it'll fire use pulleys makes it easier
🤣. I thought the law firm pitch was a joke at first.
Very cool! 15:00
Man I’ve seen a few new Yamaha vmax1700 motors for sale on the forums. Those things are super reliable 200hp beasts. The power is amazing and feels every bit as fast as my R1 in a straight line. Freaking awesome motors.
Those 700 liberties are bad ass. My kids got an original in her sled that has 10k miles all original and 150 psi both sides still looks new. They go forever. The 800’s don’t. Have a few of them too.
Awesome! Put you a 2” or 3” lift on it!??? I’m really, really liking it either way.👍 Edit: oh, and a removable windshield☔️lol
Nice work.I love your videos
You mentioned clutch work that running gear has adjustable clutch on the secondary pulley in the center is a metal disk with 3 bolts in it you loosen the bolts but don't take them all the way out and you turn that disk if I remember right there's 5 settings you'll see the numbers on the disk hope this helps
That buggy look like it has a lot of balls
Que locura, quiero uno igual!!!
Damn that thing is really coming along. Ned to get the throttle situation figure out though. The string would piss me off
great stuff thanks
I am interested in seeing more videos of this... can you make them longer please
You should 3d print panels for the body plastics!! If you model it I’ll print it for you!
Bro it’s turning out mint ,I have a worry tho,when you 4x your going to need front mud guards ,or you getting pummeld with dirt rocks water ect ,sound sick ,love it,but then again there’s a lot of work gone into it ,you done a great job 😎
Put a snorkel on it, and then some plate steel on the driveshaft tunnel and it'll be golden!
Sleds are dc and they do put out some electrical power that's how they run lights..should be able to somewhat charge a battery..might have to get the stator and mag from an electric start polaris xc700
That is awesome!
Tbh putting some holes in the top part of the firewall might not be a terrible idea. Would still keep you protected from anything major and would probably help keep that exhaust from cooking your back with some air going over them. That metal is going to get real toasty
Put an LS in it. 😂😂😂❤
might want to make some splash guards and or move the intake on the buggy prevent it dying from water
Just need some paint and is perfect👌🏼
That’s behind crown Chrysler in Cleveland used to call that place brewers and that steep hill you were looking at under the power line was climbed in a Jeep Cherokee and a 4 runner
I believe you should start a business of moding vehicles. You're very smart all you need is capital and a few employees. Its exactly how Hennessey and Guntherwerks started but I believe you're better than they were at your age.
Damn now you need some kind of windshield and if it were me I'd weld panels along the frame on the sides kinda like you did the firewall to keep some of that mud and water splashing up into the kart.
Master cylinder in the wheel travel area on an off-road vehicle w plastic reservoir might need some protection bud...but a solid build as usual ...keep kicking ass
add fenders more panels underneath don't want the tires kicking a rock towards your face. a gas pedal so u can have more control on the wheel and a snorkel for the water and that thing could dominate anything you throw at it. keep it up