been searching for a disassembly for like a year now finally stumble across this. thanks
@khurtbustamante18312 жыл бұрын
can the wheel be remove for cleaning?
@tazboy19342 жыл бұрын
Muito bom! Obrigado!
@nico_youtube2 жыл бұрын
Thanks bro
@AlexDex14 күн бұрын
mine literally just stopped working when i pressed the buttons, this could probably help me out.
@jovanekiii2 жыл бұрын
Thank you, guy!😉
@dimteam888 Жыл бұрын
dps de 4 anos me griffing começou a dar click duplo. é um incomodo infernal
@abrimoscoisaslegais60222 жыл бұрын
Hello, my m711 presents duble clik on scroll and I opem the mouse, now my mouse not pot on. :( help me please.
@flavio66972 жыл бұрын
My scroll wheel will stop working every now and again and I have to disconnect and reconnect the mouse to use it again, any help? Everything else works it’s just the scroll
@Zapple2 жыл бұрын
alguns leds do meu mouse fica ligado mesmo quando eu deixo no modo de desligado. já tentei resetar o mouse no software e no botão que ele possui abaixo dele, mas nada funcionou, so me resta abrir ele
@WhtsApp2-2 ай бұрын
my m711 cobra smokes after changing paracord. and now it won't work anymore 😭😭😭
@eazy_playz7091 Жыл бұрын
just to summmerize H.M.K's comment he said you just push the clicker thingies in so like the things you click in so apply pressure at the top and then you should her a pop and it should be good to go
@mighty.407811 ай бұрын
Hello guys, I have the same mouse, but unfortunately it fell off the table with a force. The left and right button became stuck and the dpi was damaged. However, I was able to solve the problem and return it to normal first. The buttons I noticed that the plastic from the back came out of its place I pushed it and put it back in place and it worked The buttons again for the dpi, it is because of the movement of the white transparent plastic piece that reflects the light and which is under the motherboard of the mouse. You have to put it in its right place and make sure that it moves by about 1 millimeter, no more, that is, it is almost fixed. Make sure that the USB thread is returned to its place The correct one is between the plastic supporting the wheel, in order to tighten the transparent white beam reflector and return everything as it was and it will work with you Sorry for the bad english you can ask me any thing is not clear
@mohamed020272 жыл бұрын
holy i faced the same issue tysm
@mohamedrazeen30292 жыл бұрын
How did u guys fix it ?
@ARJUN-ec9ew Жыл бұрын
@@ARJUN-ec9ew as i said in the comment
@mohamed02027 Жыл бұрын
i have the same mouse, but the problem is the wire itself from the mouse. it automatically disconnects when i swipe fast from left to right. i would love to see if you can make a video out of it.
@cheeseburgersgm4 ай бұрын
Cambia el cable se puede desmontar de la placa yo lo hice con mucho cuidado
@xDavidzn3 ай бұрын
❤ consegui arrumar meu mouse assistindo esse vídeo. Obrigada.😊
@maris15366 ай бұрын
I have the same mouse but the down part is peeling off and I don't know what do do if it peels off will it still work
@dzanbasic-2371 Жыл бұрын
Onde vc ta enfiando ele?
@Infox29 Жыл бұрын
What does the mode switch button do?
@xhemic81912 жыл бұрын
it switches between the profiles. You can create profiles in the dragon software for the mouse
@tusharvijaykumar3511 Жыл бұрын
hi. i accidently droped my redragon m711 cobra and now when i click it it doesnt come back up, what i mean my that it the right click and left click stays at hold after i click it once and only if i use my fingers to push it up i can click again pls help me fix this problem pls pls pls i liked and subscribed
@mrvishnu10163 жыл бұрын
u have to get the black cover back to its place by pulling it by ur fingers
@Its_So_Toxic3 жыл бұрын
same prolem here
@gabrielmachado15202 жыл бұрын
Hello guys, I have the same mouse, but unfortunately it fell off the table with a force. The left and right button became stuck and the dpi was damaged. However, I was able to solve the problem and return it to normal first. The buttons I noticed that the plastic from the back came out of its place I pushed it and put it back in place and it worked The buttons again for the dpi, it is because of the movement of the white transparent plastic piece that reflects the light and which is under the motherboard of the mouse. You have to put it in its right place and make sure that it moves by about 1 millimeter, no more, that is, it is almost fixed. Make sure that the USB thread is returned to its place The correct one is between the plastic supporting the wheel, in order to tighten the transparent white beam reflector and return everything as it was and it will work with you Sorry for the bad english you can ask me any thing is not clear
@mohamed020272 жыл бұрын
o meu quando descolei a borrachinha que cobre os parafusos, ela naão colocou de volta, qual tipo de cola posso usar para recolar elas?
@ChuuyaAmv3615 ай бұрын
tenta usar as colas que sao usadas para colar frontal de celular
@fabio123277Ай бұрын
Hola, no sé si llegues a ver esto pero tengo una duda: ¿Crees que se pueda remover también esa placa? Como no sé mucho de esto no sé si está pegada la placa a la parte de abajo. Lo digo porque me gustaría cambiar ese cable (de un Cobra pero el FPS) por uno más suave y flexible pero si estoy viendo bien, lo que es la parte del cable entre la conexión a la del exterior del mouse, pasa por debajo de la placa... y pues para desconectarla imagino que tendría que removerse primero. Buen video :)
@skuby22122 жыл бұрын
Es probable que ese cable esté soldado, y si lo está, no te recomiendo que pruebes soldadura con un producto tan delicado
@myenglishisbadpleasecorrec54462 жыл бұрын
Eu agora vou costumiza meu mouse falouuuuu
@pikachupk11432 жыл бұрын
Em caso de perder essa fita que cobre os parafusos, oque fazer?
@danyllo.92732 жыл бұрын
Só comprando outra msm
@goianudo86832 жыл бұрын
Outra fita que eu falo
@goianudo86832 жыл бұрын
@@goianudo8683 o meu feet soltou e está ficando ruim, sabe onde posso achar outro feet a venda?
@OnyHairu2 жыл бұрын
@@OnyHairu geralmente você acha na aliexpress, e no mercado livre , mas no mercado livre é 2x o preço
@goianudo86832 жыл бұрын
O Scroll do meu mouse está clicando com o botão m1 esquerdo, toda vez que eu rolo para cima ou para a baixo o mouse clica. Agora toda vez que eu uso o scroll o m1 fica pressionando.
@vitordanielvitor91945 ай бұрын
O meu desligou a luz do sensor, ta funcionando o ponteiro mas n com mt precisão
@denilsonlima87905 ай бұрын
o click do meu quebrou, comprei um de 10 conto de coloquei os click no original kk ta top
@wandersonlima70112 жыл бұрын
o meu nao quebro, mas ta com barulho estranho, to com ele a 3 anos
@chilling23812 жыл бұрын
kkkkkk o meu também.. sabe dizer como que troca só o click?
@mainkatarinapassandofome227911 ай бұрын
@@mainkatarinapassandofome2279 se estiver se referindo a carcaça do click a minha quebrou tbm. Entrei em contato com a reddragon atraves de ticket, me pediram a nota fiscal e mesmo o mouse fora da garantia eles me enviaram toda aquela parte de cima de graça. só tive que pagar o frete pra mg que deu 31,00.
@jotapegomes24044 ай бұрын
Bom video. Meu Redragon M711, depois de 2 anos de uso começou essa semana a dar problema de double click. Achava que por ter switches opticos, ele fosse imune a esse tipo de problema... saco. Bom, menos mal que os Logibosta que começam a dar double click com 3 meses de uso. Vou desmontar seguindo o video e fazer uma limpeza, passar um limpa contato, pra ver se resolve.
@arrowflashbr11 ай бұрын
resolveu?
@nicolasgoncalves895811 ай бұрын
@@nicolasgoncalves8958 Infelizmente não, e algumas horas depois o mouse foi pro saco de vez - não sei se dei alguma microdescarga estática ao manusear, ou se foi alguma umidade do spray limpa contato que usei, ou se já estava pra acontecer de qualquer jeito. Chato, mas durou mais que os últimos Logitech que tive. Pena que todo mouse está descartável hoje em dia, saudades do meu MX518 que durou 11 anos...
@arrowflashbr11 ай бұрын
alguien sabe si se le puede quitar peso al mouse?
@patriciocastillo33972 жыл бұрын
@Takamasa Nomuro o meu estava com falha no click, eu abri para olhar e depois ele nao ligou mais
@flavio66972 жыл бұрын
If you're here it's probably same reason I am - the mouse fails after only 1 or 2 years of moderate use ??? And you cant easily open it without a heat gun!?!?! I'll avoid this brand evermore...
@kensystem2 Жыл бұрын
I'm here because my M711 started presenting double clicking issues on the LMB after 2 years of use. I'll see if I can fix it. Even if it can't be fixed, I've used it daily for 2 years, still much better than Logishit mice that start presenting double clicking issues with 3 months of use (had a G402 Hyperion Fury that started double clicking after just 3 weeks, RMA'd it, same thing with the replacement lol).
@arrowflashbr11 ай бұрын
@@arrowflashbr Could you fix it ? Double clicking problems with optical button technology should be impossible.
@DevouringKing8 ай бұрын
@@DevouringKing I also thought that double clicking problems shouldn't happen in mice with optical switches, but still, it did for me. Sadly I couldn't fix it, and a few hours after I tried, the M711 completely died. No idea if it was due to some static discharge when I handled it, or humidity from the contact cleaner spray I used, or if it was about to happen anyways and the double clicking was just the first sign. Sucks, but it still lasted much longer than any recently purchased Logitech mice I owned. Got another M711 and so far it's working well, considering how much they cost, if it lasts another 2 years it's a good deal. A shame that every mouse seems disposable these days, I still miss my OG MX518 that served me for 11 years without any issues.
@arrowflashbr8 ай бұрын
@@arrowflashbr Im not sure about the Optical switches in the M711 anymore. Because in 3 Years sind Roccat Builds them, i never heared of a single double click issue. To the rest of your story, jeah my old First Generation Razer Death Adder from 2006 was working 7 years for me. Its Rare today. My last Mouse holded 2 years, its dissapointing.
@DevouringKing8 ай бұрын
What about removing the wheel? Hardly a tear down, you just took the case off and unplugged it.
@VertigoGTI Жыл бұрын
bruh my sensor have problem
@Pandalolz Жыл бұрын
managed to solve? managed to solve?
@denilsonlima87905 ай бұрын
@@denilsonlima8790 no i bought a better one and throw that one away
@Pandalolz5 ай бұрын
So, the Redragon idiots have put the screws under the teflon pads, meaning you can't open and clean the mouse without ruining it... I often wonder, how some people got their engineering degree.
@kornelijekovac97932 жыл бұрын
@Happy It means that you can't open the mouse unless you take off the teflon feet. Screws are underneath them. Once you peel them off, they will be distorted and won't stick back as they should. So, you want to clean the mouse (2-6 months) you have to get a new set of feet for the mouse, which is exhausting.
@kornelijekovac97932 жыл бұрын
it's the same for any other mouse, lol. I hate it
@coel52762 жыл бұрын
@@coel5276 I found the answer: Asus ROG Gladius, Strix Impact, etc. Those mouses with push-fit switch socket design, most probably will have the screws that are not behind the teflon feet.
@kornelijekovac97932 жыл бұрын
dont heat the teflon, just try to peel it off. then it sticks back, but its been 2 years since ur comment so i hope ur doign well and stuff @@kornelijekovac9793
been searching for a disassembly for like a year now finally stumble across this. thanks
can the wheel be remove for cleaning?
Muito bom! Obrigado!
Thanks bro
mine literally just stopped working when i pressed the buttons, this could probably help me out.
Thank you, guy!😉
dps de 4 anos me griffing começou a dar click duplo. é um incomodo infernal
Hello, my m711 presents duble clik on scroll and I opem the mouse, now my mouse not pot on. :( help me please.
My scroll wheel will stop working every now and again and I have to disconnect and reconnect the mouse to use it again, any help? Everything else works it’s just the scroll
alguns leds do meu mouse fica ligado mesmo quando eu deixo no modo de desligado. já tentei resetar o mouse no software e no botão que ele possui abaixo dele, mas nada funcionou, so me resta abrir ele
my m711 cobra smokes after changing paracord. and now it won't work anymore 😭😭😭
just to summmerize H.M.K's comment he said you just push the clicker thingies in so like the things you click in so apply pressure at the top and then you should her a pop and it should be good to go
Hello guys, I have the same mouse, but unfortunately it fell off the table with a force. The left and right button became stuck and the dpi was damaged. However, I was able to solve the problem and return it to normal first. The buttons I noticed that the plastic from the back came out of its place I pushed it and put it back in place and it worked The buttons again for the dpi, it is because of the movement of the white transparent plastic piece that reflects the light and which is under the motherboard of the mouse. You have to put it in its right place and make sure that it moves by about 1 millimeter, no more, that is, it is almost fixed. Make sure that the USB thread is returned to its place The correct one is between the plastic supporting the wheel, in order to tighten the transparent white beam reflector and return everything as it was and it will work with you Sorry for the bad english you can ask me any thing is not clear
holy i faced the same issue tysm
How did u guys fix it ?
@@ARJUN-ec9ew as i said in the comment
i have the same mouse, but the problem is the wire itself from the mouse. it automatically disconnects when i swipe fast from left to right. i would love to see if you can make a video out of it.
Cambia el cable se puede desmontar de la placa yo lo hice con mucho cuidado
❤ consegui arrumar meu mouse assistindo esse vídeo. Obrigada.😊
I have the same mouse but the down part is peeling off and I don't know what do do if it peels off will it still work
Onde vc ta enfiando ele?
What does the mode switch button do?
it switches between the profiles. You can create profiles in the dragon software for the mouse
hi. i accidently droped my redragon m711 cobra and now when i click it it doesnt come back up, what i mean my that it the right click and left click stays at hold after i click it once and only if i use my fingers to push it up i can click again pls help me fix this problem pls pls pls i liked and subscribed
u have to get the black cover back to its place by pulling it by ur fingers
same prolem here
Hello guys, I have the same mouse, but unfortunately it fell off the table with a force. The left and right button became stuck and the dpi was damaged. However, I was able to solve the problem and return it to normal first. The buttons I noticed that the plastic from the back came out of its place I pushed it and put it back in place and it worked The buttons again for the dpi, it is because of the movement of the white transparent plastic piece that reflects the light and which is under the motherboard of the mouse. You have to put it in its right place and make sure that it moves by about 1 millimeter, no more, that is, it is almost fixed. Make sure that the USB thread is returned to its place The correct one is between the plastic supporting the wheel, in order to tighten the transparent white beam reflector and return everything as it was and it will work with you Sorry for the bad english you can ask me any thing is not clear
o meu quando descolei a borrachinha que cobre os parafusos, ela naão colocou de volta, qual tipo de cola posso usar para recolar elas?
tenta usar as colas que sao usadas para colar frontal de celular
Hola, no sé si llegues a ver esto pero tengo una duda: ¿Crees que se pueda remover también esa placa? Como no sé mucho de esto no sé si está pegada la placa a la parte de abajo. Lo digo porque me gustaría cambiar ese cable (de un Cobra pero el FPS) por uno más suave y flexible pero si estoy viendo bien, lo que es la parte del cable entre la conexión a la del exterior del mouse, pasa por debajo de la placa... y pues para desconectarla imagino que tendría que removerse primero. Buen video :)
Es probable que ese cable esté soldado, y si lo está, no te recomiendo que pruebes soldadura con un producto tan delicado
Eu agora vou costumiza meu mouse falouuuuu
Em caso de perder essa fita que cobre os parafusos, oque fazer?
Só comprando outra msm
Outra fita que eu falo
@@goianudo8683 o meu feet soltou e está ficando ruim, sabe onde posso achar outro feet a venda?
@@OnyHairu geralmente você acha na aliexpress, e no mercado livre , mas no mercado livre é 2x o preço
O Scroll do meu mouse está clicando com o botão m1 esquerdo, toda vez que eu rolo para cima ou para a baixo o mouse clica. Agora toda vez que eu uso o scroll o m1 fica pressionando.
O meu desligou a luz do sensor, ta funcionando o ponteiro mas n com mt precisão
o click do meu quebrou, comprei um de 10 conto de coloquei os click no original kk ta top
o meu nao quebro, mas ta com barulho estranho, to com ele a 3 anos
kkkkkk o meu também.. sabe dizer como que troca só o click?
@@mainkatarinapassandofome2279 se estiver se referindo a carcaça do click a minha quebrou tbm. Entrei em contato com a reddragon atraves de ticket, me pediram a nota fiscal e mesmo o mouse fora da garantia eles me enviaram toda aquela parte de cima de graça. só tive que pagar o frete pra mg que deu 31,00.
Bom video. Meu Redragon M711, depois de 2 anos de uso começou essa semana a dar problema de double click. Achava que por ter switches opticos, ele fosse imune a esse tipo de problema... saco. Bom, menos mal que os Logibosta que começam a dar double click com 3 meses de uso. Vou desmontar seguindo o video e fazer uma limpeza, passar um limpa contato, pra ver se resolve.
resolveu?
@@nicolasgoncalves8958 Infelizmente não, e algumas horas depois o mouse foi pro saco de vez - não sei se dei alguma microdescarga estática ao manusear, ou se foi alguma umidade do spray limpa contato que usei, ou se já estava pra acontecer de qualquer jeito. Chato, mas durou mais que os últimos Logitech que tive. Pena que todo mouse está descartável hoje em dia, saudades do meu MX518 que durou 11 anos...
alguien sabe si se le puede quitar peso al mouse?
@Takamasa Nomuro o meu estava com falha no click, eu abri para olhar e depois ele nao ligou mais
If you're here it's probably same reason I am - the mouse fails after only 1 or 2 years of moderate use ??? And you cant easily open it without a heat gun!?!?! I'll avoid this brand evermore...
I'm here because my M711 started presenting double clicking issues on the LMB after 2 years of use. I'll see if I can fix it. Even if it can't be fixed, I've used it daily for 2 years, still much better than Logishit mice that start presenting double clicking issues with 3 months of use (had a G402 Hyperion Fury that started double clicking after just 3 weeks, RMA'd it, same thing with the replacement lol).
@@arrowflashbr Could you fix it ? Double clicking problems with optical button technology should be impossible.
@@DevouringKing I also thought that double clicking problems shouldn't happen in mice with optical switches, but still, it did for me. Sadly I couldn't fix it, and a few hours after I tried, the M711 completely died. No idea if it was due to some static discharge when I handled it, or humidity from the contact cleaner spray I used, or if it was about to happen anyways and the double clicking was just the first sign. Sucks, but it still lasted much longer than any recently purchased Logitech mice I owned. Got another M711 and so far it's working well, considering how much they cost, if it lasts another 2 years it's a good deal. A shame that every mouse seems disposable these days, I still miss my OG MX518 that served me for 11 years without any issues.
@@arrowflashbr Im not sure about the Optical switches in the M711 anymore. Because in 3 Years sind Roccat Builds them, i never heared of a single double click issue. To the rest of your story, jeah my old First Generation Razer Death Adder from 2006 was working 7 years for me. Its Rare today. My last Mouse holded 2 years, its dissapointing.
What about removing the wheel? Hardly a tear down, you just took the case off and unplugged it.
bruh my sensor have problem
managed to solve? managed to solve?
@@denilsonlima8790 no i bought a better one and throw that one away
So, the Redragon idiots have put the screws under the teflon pads, meaning you can't open and clean the mouse without ruining it... I often wonder, how some people got their engineering degree.
@Happy It means that you can't open the mouse unless you take off the teflon feet. Screws are underneath them. Once you peel them off, they will be distorted and won't stick back as they should. So, you want to clean the mouse (2-6 months) you have to get a new set of feet for the mouse, which is exhausting.
it's the same for any other mouse, lol. I hate it
@@coel5276 I found the answer: Asus ROG Gladius, Strix Impact, etc. Those mouses with push-fit switch socket design, most probably will have the screws that are not behind the teflon feet.
dont heat the teflon, just try to peel it off. then it sticks back, but its been 2 years since ur comment so i hope ur doign well and stuff @@kornelijekovac9793
Ta ai um vídeo inútil😅