I REINVENTED RUBIKS CUBE | created 3x3 on magnetic force
You can print this cube yourself 👉 www.printables.com/model/6324...
🔥 Become a Channel Sponsor: / cubastic
🔷 If you like this video don't forget to subscribe :) goo.gl/HyL2ad
Also don`t forget to check Cubastic channel in Spanish: bit.ly/3yJ5jsj
• HOW TO SOLVE 3x3 RUBIK... 👉 The easiest way to solve a 3x3 rubik's cube
In this video I will show you fully magnetic Rubik`s cube I`ve invented on my own. I`ve modeled each part of it and printed it with my Ender 3 S1 Pro 3D printer. Watch this video till the end, I`m going to show you a lot of cool things today!
SUBSCRIBE:
🔷 Instagram: / bondarenkoyt
🔷 Tiktok: vm.tiktok.com/EQKdEb/
Mail for commercial offers: cubasticyt@gmail.com
#rubikscube #3dprinting #3dprinted #magneticcube #rubikscubesolving #cubastic
Big premiere today! This will be a very cool video, don’t forget to press the bell and be sure to become sponsors of the channel, because soon there will be separate material for sponsors! 🔥 Become a Channel Sponsor: kzhead.infojoin
Make 33 by 33 cube
Can you give me your 10 by 10 cube
saya tidak mengerti bahasa anda .. tapi sepertinya itu tidak mudah untuk di putar dengan cepat ..
Fun fact: Larry Nichols, the guy who invented the 2x2 used the same method of building with magnets. But, he changed it because people were just taking it apart and saying they solved it.
This video is more of a creality printer ad than a 3d printed magnetic Rubik's cube video
finally, a cube that will always fall apart while speedcubing and can be reassembled safely
finally a rubix cube you can safely take apart and put back together if you give up lol
*rubik
@@Chain23456iamxd*Rubik's
So he didnt invented he innovated
No he remixed
Scrambled
Ate
he remastered
He reply chained
5:30 Cubastic: i hope you have not forgotten about it Me: yeah yeah i totally didn't forget about it
This video really felt like a classic Cubastic video. I loved it ❤
Maybe you can make the insides like 0.5 mm thicker, and then sand and polish them down to exact size and get some smoother turning? its also possible to apply some heat to get 3d prints really "polished" Should also be possible to print with rounded corners to get that corner-cutting from speed cubes!
also: how about making the core spherical?
I am impressed, good work! I started with the cube in 1981 and have seen many variations, I like yours!
Хм. Не такой уж дорогой аппарат. А печатает классно. Получше моего Easythreed k7 🙂Жаль, что у тебя теперь контент только на английском, но всё равно удачи тебе во всём! СПАСИБО!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 🙂
Cubastic :- hmmm Mojang :- perfect sound for villagers 😂😂😂
Why was 2/3 of the video literally about the printer he was sent??? This wasn't about the cube at all... I was expecting to see some stuff about the creation process or maybe why he felt this needed to be done but 1 minute of "yeah I decided to print a cube" followed by 10 minutes of "hey look at this printer I was sent"
Because he got the printer for free in exchange for an advertisement, even though he didn't make that clear which is scummy
@@nameonelast598 I'm aware it was clearly an advertisement it just irritated me that the video wasn't at all presented as such. Even if he had made the intro something like "this company sent me a 3d printer and I thought to truly put it to the test, I should have it be a solution to a problem I've been thinking avout for a while" would have made the video much more digestible as something that wasn't just I stole this idea for somebody on the internet but that's not important let me tell you all about this new printer
That looks like a lot of fun!
This is amazing. Your channel is awesome. Keep it up!!!
That's pretty cool I love the texturing
It's easiet 3x3 to solve cause you take it apart and put together correctly.
finally, a cube in can solve easily.
He really innovated the Rubik’s cube
Cubastic! Please make a video on solving 33x33x33 rubik's cube
I thought it stopped at 21x21
What glue are you using? With the needle?
This is actually kinda genius. I wonder what it would be like from a company like moyu or gan
almost a maglev cube.
Amazing advertising for the printer.... Really enjoyed
Try making a line of cubes called "Super scramble cubes". They are cubes with magnets such that you can take off pieces and scramble them. It would be super cool but difficult.
when he said subscribe the sub button lit up
Which is the 3D software that you are using on iPad? Inspiring video. Tks
is sharpr3D
What modeling software did you use on the tablet?
where can you buy the magnets
companies be like: this porduct will make us rich
The "Really Nice" sounded like "What a time to be alive" from 2 minute papers channel.
Great video
go ahead cubastic
This is so cool!!
3:09 hahahahaha I smiled at that
very cool 👍
try making a 4x4 out of magnetic force
What if the cubes were hollow, and open on the side that the colored insert goes. And then the magnets installed from the inside, so they're invisible, and also slightly further apart giving it a smoother turn.
Great👍
So good
this guy is the most crazy mind in the world lol
Make a 4x4 a 2x2 and a 5x5
Hello cubastic
Hi 👋
What CAD software did u use for the modeling?
Fantastic
gan be like : write that down write that down!
Wait till he hears about magnetic cubes
Duvido vc recriar um cubo tornado v2
I love poti😅
Three quarters of the video is a creality unboxing?
How do solve a 4 by 4 rubik's cube?
Ок
Hahaha very funny 😅
Пока небольшой акцент, но неплохо
Це у тебе щось не те з мовою 💁🏻♂️
Video stars at 10:48
what about frictionless cube where u create normal cube but make the surface repel each other using magnet… is it impossible ? just curious
Wow
Can you print a bulbul
да ну, я его даже сначала не узнал 😅
Can u say hi
How did you do that?!
CUBASTIC w
Hi
How to Solve a 4/4 Rebus Cube
Jperm
I have the normal benchy 3d print
All
rubik's cube but non-cubers can solve it
it has been so long
i thought this was a puzzle channel. it looks like a 3D printer video rather than a puzzle.
11:55 He did not just call those deepenings right? (edit): and Why is 90% of the video on the 3d printer and not the actual cube?
This will be the GAN 30
Its called innovation and no reinvention
What channel is for art me
I can’t wait
Not $650 I know bc i got the printer it is heavy
So, in a 15-minute video with a title claiming to be about making a Rubik's cube, you spent the first 10 minutes advertising a 3D printer. You should be more transparent with your audience and tell them when a video is either an advert or heavily sponsored. Something like "I make a Rubik's cube to let my audience know about a great little 3D printer I'm being sponsored to use." Then maybe a highlight saying "Sponsored content!"
🎉😅😅
this just exist like the gan 13
Hey its not called reinvented its called recreating
Second
almost half of the video was unboxing 💀
Haha
i think i have this printer
wait no i have one very similar to this
Can i get a cubeeeee 😢😢😢
Yes! Just print it out👍🏼
I meant a real cube becuz i want to get into competitive cubing well Any way thanks for replying
Gan cubes in 2030:
The video started with rubix and became 3d printing reveiw video very soon... not what came to watch by reading the caption...
third
This video is 11 minutes of ad and 4 mins of plastic clean up and assembly. Where was the explanation of the build and design process?
Переобулся
Firstplease send me a cube big fan
السلام عليكم ورحمة وبركاته خه وهتهتهتتتهالغبييقيبغا.
In english please