Extremely hard and difficult neck repair of Fender Jazz Bass
In this video I show process of replacing truss rod and fretboard on Japan Fender JB. In this case this has to be done because of completely weared rod and neck constantly losing tension. I decide to put modern dual truss rod, despite it`s not original design in most cases it will work more stable, and it can be replaced in future without total disassembly of neck 🙂
I also needed to replace the fretboard - the original one was so thin that it did not withstand dismantling 🙃
Also we launch YT sponsorship, and already have educational content about fretworks.
Detailed description of video, tools and agents used will be a bit later on my Patreon.
🌚 Merch, guitars and tools:
shpachuk.com
🌞 Patreon:
/ shpachuk
☕️ Byu me a coffe:
buymeacoffee.com/shpachuk
So scammers gonna scam again. I remind to you all - I have no telegram, or other messengers. I don`t do any giveaways or similar stuff. If you saw comments from "persons" who pretended to be me - report and block. Don`t let yourself be scammed.
I got one yesterday. I can't seem to block them so I just deleted it.
I got one today . Scared me because I tried to contact you on IG
They did try it with me, saying: "Hit me up", but I know better. Fabulous work as always.
Those drive me nuts! I report them every time I see them, myself.
Thank you for advise!
No music (apart from the occasional post repair strumming by others in your shop), no commentary, just an amazing demonstration of your skill. Love it!
I would second this but why comment... Same theory...
agreed - yeah i didn't know a truss rod could be replaced like this. fretboard too. wowza.
How did you decide on this predominantly male trade (carpentry) builder and repairer of guitars. No, I'm not sexist and I think that women can also do this job very well if they love wood first secondly, they like instruments, guitars.
Inshort it's ASMR. Personally i love it, it's relaxing and you learn something. Most of the time I listen to her videos (not just her videos but different kinds of ASMR videos) till i fall asleep and it's very effective.
Me gustaría que tocara un poco el instrumento antes y después de la reparación solo digo que si yo me dedicará a eso no podría evitarlo además de que le llegan lindos instrumentos siempre
I like watching luthiers working in silence. No music. Just the sound of tools on wood. It's very calming. Thank you so much
Ear buds
Although buying a replacement neck is probably a lot cheaper than what you're doing, it's great to see a master at work.
This probably came out better than it did originally from the factory. Fantastic work - it was a pleasure to watch you restore this.
I've watched hundreds of luthier videos but this is the first time I've ever seen a truss rod replaced. It's like watching a guitar have open heart surgery. Beautiful work and well done on bringing the patient back to life!
I agree. Very beautiful work and tremendous skill. I can't help but wonder if it would have been less expensive, and definitely easier to just replace the neck?
Because if you live in the west the luthier will charge you so much it is cheaper to just buy a new neck
@@urproblem It was replaced with a 2 way truss rod.
It's because truss rod replacements are not financially worth it unless the neck is vintage. They eclipse the cost of just buying a new neck - even a very nice USA made one.
@@urproblem yes i missed the install as well
Absolutely beautiful work. Such respect being given to that instrument. I had no idea the amount of work and craftswomanship that went into the fretboard.
I love your patience as you work. This is one beast of a job to do. Well done.
Wow Tanya, I am a guitar tech for over 30 years but I would never attempt to do such a difficult job as this. You did a masterful job. I am blown away by your skills, and I am learning so much from watching you work. Thank you for being there ♥️
🤔
🤔
Вы не взялись бы за такую сложную работу потому что вы гитарный техник а Таня гитарный мастер. Замечаете разницу?
Предполагаю, что дело скорее в том, что в случае с относительно молодым mij p bass где-нибудь в Америке сильно дешевле обойдётся купить новый гриф, если не гитару целиком, чем оплатить такой кропотливый труд.
@@alivitaly I think that is what he said. Did you notice what he said?
That is the highest level of skill. There are other videos about this topic, but this is on the level of Stewmac or even above. Someone really most love this Japanese made Jazz bass.
most people will never know the amount of work involved in repairing guitars. Well done Tanya, keep it up girl
Yeah . Everyone “ does their own work “ Or … as I am a pro tech for 25 years . My uncle said to me “ hey Pete how is work ? Still tuning guitars for a living ?” Yeah asshole, that’s what we do . We tune em
Tanya, I love your videos so much. I've always wanted to repair musical instruments by myself, but never tried it. Since I discovered your channel I started to get some basic tools and I'm gonna learn to repair instruments by myself. So I wanted to say thank you very much! You're one of my biggest inspirations to learn to do something I've always wanted to!
There are two reasons that I adore this episode. First, and foremost was the demonstration of the entire process needed to remove, and replace a vintage installed, single-action truss rod. Then to fabricate a new fingerboard to match the spec of the original. The work was concise, detailed, and featured a methodical style of patient work flow. Second, this episode clearly shows evidence as to why stringed instrument repair fees are structured. Instrument owners, vintage or modern, should witness exactly how labor intensive this type of repair is. The magic of editing does make the course of repair seem to glide without time. Nevertheless, I applaud this necessary video for its attribute of your talent, as well as educating the musician(s) at large the cost of some repairs that require mass planning, and finishing. Excellent job, Tanya. I hope you were well compensated for this undertaking. Enjoy your weekend.
Wow! You’re as professional as they come 😊 I didn’t realize how much work time and skill is involved in this… Awesome job Tanya 😎
So completely impressive. If you had filmed this in real time it would have kept me watching for all the time you put it. I hope people cherish your work! Thanks
Thank you for posting this video. I've never seen a truss rod replacement before... your craftsmanship is second to none. Absolutely beautiful work on this job.
At which point it was replaced?
9:33 @@gelo1238
When she chipped out the metal rod (truss rod) running up the middle of the neck, sanded the canal, and put a new rod in. I don’t think there are many people doing this kind of work, even at the Fender Custom Shop they’d probably chuck the neck if it had truss/fret wood issues and source one that didn’t.
Siempre quise ver como una profesional reparaba éste tipo de problema y he de decir que no es un trabajo sencillo.Enhorabuena eres una maravilla!❤
This really makes me miss my old CIJ Jazz bass. It had neck issues but I wasn't equipped for this kind of repair at the time. Good to see it can be done.
Its a bolt on neck. If it's not rare just replace it. If it's irreplaceable then we now know where to go 😊
Nerve wracking to watch how much precision this type of job takes. So many ways it could potentially go wrong. I think I'll be sticking to repairing my own instruments because I'm not sure I could handle the stress of knowing the stakes of working on something sentimental to someone else.
Precision?? It's a butchers shop
@@ASQUITHZ9 out of curiosity prompted by the perceived tone of your comment, in what ways would/does your work differ?
I really enjoy watching you work on the necks. Your attention to detail and respect for process impresses me 😊
Astonishing!! Wonderful to see your work, calm, precise and perfect executed. Wonderful. Congrats!
That was therapeutic to watch. Beautiful craftsmanship and attention to detail. I’m sure it plays better than the factory setup. Well worth it to save a MIJ jazz bass. 👍
one of the best re-fret works I've watched on KZhead
That was excellent work. Thank you for sharing. I am excited to see the number of fans you have gotten in just a few months. You deserve it! Keep up the good work!
If she does repair work naked her channel will blow-up beyond the stratosphere......but PLEASE don't do that and be like some of those guitar players!
This is my favorite channel to watch. Very interesting to see all of the techniques used along with the attention to detail. Look forward to every video!
Extremely satisfying!! What a perfect job done!!! 👍X10K I don’t see myself wanting to be a luthier but this video is so good to watch!! Now I got to see how a neck replacement is done professionally. 30 minutes well spent!! Love it!!!!
Just amazing work! You are obviously extremely talented! Your craftsmanship is second to none. Thank you for sharing. 👍🏻
Remarkable skills that you have! The fret board and the highly polished frets look great. Thanks for another learning lesson.
As soon as I saw you drilling out the the strip over the truss rod I knew what the issue was. I didn’t read any comments first so I could figure out the issue. You have crazy good skills as I’ve said on many of your videos. You go after these hard jobs like an old repair dog who has been doing it for 40+ years like me. I would be a little tentative on this but you killed it. I was a certified tool and die maker for my day job for 30 years and that skill was definitely applicable to guitar repair. You would be great at that trade as well. Guitars are much more rewarding to build. The pride you put into your work is very evident. Your videos hopefully will encourage all who do this have the same attitude. 👍👍😎😎🤘🤘
So what was the issue. Was the truss rod replaced. I didn’t see it
Really incredible craftsmanship! Thank you for sharing your work!!
Holy moly. I will never ask anyone to replace a truss rod again!
This one was the most difficult i've seen so far. Incredibble job ❤
I’ve never seen anything like this. This woman takes an extremely tough and impossible job and produces a work of art. True craftsmanship.
Yeah, I probably would've convinced the customer to just replace that neck. That's a whole lot of love there.
I don't play guitar, I'm a drummer. However, there's a lot of joy in watching a craftsperson do amazing work on any instrument. I dig the audio too, no BS, just the sound of progress.
An absolute pro. I learn so much by watching you, Tanya.
Terrific video and exceptional skills! Thank you for sharing these examples with your very nice video presentations that provide great insight into your methods without getting carried away with unnecessary video over production techniques that plague so much of what social media displays currently. I've been a part time luthier, player, designer for over 5 decades and your level of skills is not often witnessed. Congrats!
Thank you 😊
Wow that was like watching an open heart surgery. Such a great job Tanya! The new fretboard looks absolutely stunning. Even though I'm a guitarist, I'd love to play this bass
You have to have a great sensitivity in your soul to be able to do that type of work, it is pure art. Amazing.
Great video showing the details that go into an insane repair like this. Someone must really love the feel of that neck to have paid for a repair like this instead of just getting a replacement or custom neck made.
i’ve been doing some basic lutherie work for a year or so now as the first woman to work in the shop, it’s nice to see your epic skill! inspiring. i hope to be advanced like you in the future
I’ve done a bunch and this is among the best I’ve seen demonstrated. Real first class work right here.
You are amazing!!. That looks like it was a tedious job and massive patience. Ive never seen a Truss Rod replacement, let along the entire neck with new Fretboard. I see the Crocs made the video, gotta be comfy as you work. Truly Amazing, Tanya.
look up rosa string work he done it ton of time
Wonderful, Tanya, wonderful!!! You are GREAT, GREAT, GREAT!!! CONGRATULATIONS!!!!
Unbelievable workmanship!!! 😋🌶️🎛️😇🥰
As a bass player, I always wondered how worn or broken truss rods were removed and replaced by luthiers. You are very skilled in what you do. Hat's off to you!
easier to get a new neck....NO WAY am I ever fixing a truss rod/warped neck again.... I will set it on fire and buy a new one....
@@volpeverde6441 it all depends on the instrument and player... on some older or custom instruments, the necks were built by hand and it's close to impossible to replicate or replace given the complex shape. fretboards can be measured and replicated easier, same w/ frets. on some other instruments the necks are 'mass produced' so the shapes and sizes are in fact identical thus replacing the neck has close to zero impact on 'the feel' ps: some musicians (not just bass players) prefer certain builders for the sole technique they use to build and shape the necks. it's the part of the instrument that has the greatest influence on 'the feel'.
@@duroxkilo I'm sure you're right.... ALL my 5 and 6 string basses have been customised for my weird style of playing.... but warped neck and truss rod.... nearly made me jump out of the fucking window....(the 6th floor) I will still let a pro mend it....or sacrifice the guitar to satan....
that's terrible, so sorry for the pain... @@volpeverde6441
This is so damn cool. I love the quality of your videos. Thank you for taking the time to make them and share them with us.
I LOVE YOUR VIDEOS!!! No annoying music, just the sound of world class labor!!! I wished you were geography closer so that I could send you my vintage Gibson 345 ES-TD for some much needed love & care!!
I'm heading in to my very first truss rod replacement. Thank you for the example. I like the idea of putting the filler piece below the truss rod instead of doing exactly what fender did.
Love these videos, as a fellow luthier (hobbiest) I know the difficulty and you did a great repair, nice work. Stay safe!
What’s the stuff that’s in the small clear dropper she puts on the sides of the frets and the nut? Is that some kind of glue or something?
Glue
superglue@@willscott5841
That was about the most amazing repair I’ve ever seen. Artistry.
intensely educational. thank you so much for taking the time to show your incredible skill
You have to be the most skilled luthier I have ever seen!!! Rock on Tanya!!
What a pleasure to watch someone who knows what they’re doing! A truly skilled artisan! Kudos to you!
Love your videos. Not only are you exceptionally talented but your video editing is fantastic! Those transitions of all black are really good. :)
Incredible craftsmanship, brilliant to watch. Respect
That was an absolute masterclass job. You have meticulous attention to detail, I would trust you with any of my guitars. Keep up the superb work.
Definitely went above and beyond with this one Tanya. I've seen luthiers tackle this problem by clamping the neck in such a way as to apply enough torque to facilitate engagement of the truss rod. More stubborn ones required the additional use, within the clamps, of a conductive high heat press. As always, great work and video documentation. :)
Excellent video! It's really satisfying, I guess for all of us, to see such dedicated and careful work being made. For you for doing, presenting, in a good pace, demonstrating your dedication. For us so we can be inspired and resonating with this demonstration of how we can face our pathways in life. It's difficult to see but, for every single activity that we make in our lives, being involved, focused, curious about how to manage / solve problems as they are being encountered, true engagement in what we are doing. If we cannot reach this perspective, we need to ask then: why am I doing this? Great Work, keep it up!
You and your skills are a blessing to the world!
Thanks for the video! Extremely difficult and also could be dangerous! I had used a steam iron and paint scraper just like you did, long ago! The blackened scraper blade seemed to be like a spring. Nearing the nut end, the fret board sprung away, when it seemed really stuck hard. The fretboard nicked my wrist - the working hand! I had not used any clamping, as things seemed not so difficult! The paint scraper also had sharp corners. Suggest dulling the corners and restraining the force, not the maximum! Protect the other hand and body near the job. Having seen your other videos, its clear that you are a very capable expert. Stay safe on every job!
I had no idea a truss rod could be replaced!! Stunning work....as always. This continues to be the best guitar content on KZhead and its really cool to see the channel and subscriber number grow!! You should definitely offer those "Shpachuk" T shirts for sale! 🙏😍😁
Очень деликатная и тщательная работа, потрясающее внимание к мелочам!
I don’t even play guitar but I really enjoy watching your videos. You do amazing work.
It’s always amazing to watch a master at work!
I know it's a really hard and tough job for you, and you're really good at it!🙏🏻 But for me, and I'm sure for other people, it's very relaxed to watch your video's. It stimulates me to be more precise on my projects! Thnx Tanya!
How do you know she is good at it? If you are not a luthier how could you know?
@@elypowell6797 I build guitars!
You do fantastic work, great job. If I were the owner of that guitar to me it seems it would have been less expensive to just order a replacement neck. I am sure that job you did cost more than what a new neck would have cost. That had to be an expensive job with all the great work you did.
Sometimes replacement is just not an option, but you really have a point. In this case we have to save particular _this_ neck :)
Wow so much work! But I would be so glad to have someone agree to save a beloved guitar like this!
Tanya you rock. The level of work you do is first class. Hats off to you, brilliant. Thanks very much for the video
Trabalho de excelência ❤
A lot of other repair people would have put that neck in the bin and replaced it with an off the shelf replica. Kudos to you for making the effort to save it.
Lol changing the trussrod is something common when you are a luthier.
@@nikos4828 I bow down before your mastery of the art of luthiery. Please forgive my foolish observation.
Replacing the fretboard made the job financially unviable not sure why it was done. If you keep the fretboard intact it’s a pretty quick job.
It is a new neck. Lots of time to save a logo. Amazing work! You’re a badass.
It's a MIJ Fender, so the measurements are metric. I'm not sure how difficult it might be to replace it with a MIM or MIA neck.
You do some really good work Tanya! Thanks for this.
Great job! I'm having so much fun watching you work
Fender designed his instruments with bolt-on necks so that you didn't have to go through all this.
As long as you don't care for the instrument's value..
The neck is stamped”made in Japan” on the back, so...
A good replacement neck is expensive.. I bought a vintage reissue 60s USA neck for a strat: 700€.. So repairing in a lot cases is the best cost alternative.
Did the client spec. a 14in. radius ?
Really enjoyed watching this, I was a bit anxious to start, then as the video went on, I was amazed at how well, the guitar looked, you have an incredible skill, with immense patience too.
Wow, you do beautiful work. Thank you for allowing us to watch....
Great job the reason leo made the bolt on neck is so you didn't have to do repairs like this lol
Love the videos. All the best to you and your loved ones in your difficult situation in Ukraine.
Thank you!
I appreciate your attention to detail. Great job
A truly masterful and skilled workmanship. Well done!
Who is this person without Nail Art who takes over at 7:28? What have you done with Tanya!
😂
Flying mosquito 🤣👍
Impressive to say the least. Not only do you have an amazing skill and talent, you have unparalleled patience. I would have thrown that neck across the room 10 minutes in! Bravo!!
Interesting take on trimming the fretboard near the nut, I'll have to try that. Thanks for the tip & good work!
I'm a little surprised this neck was worth repairing, since the only original piece that remained by the end was the maple part.
The maple part is the neck...
No, I have no idea why you solder the frets.
Melts the glue and gunk so you can pull the frets- works great
@@Badhands55 I've phrased my question poorly. Not why the heat. Why the solder? I've seen many videos of frets being removed just by heating the fret itself. This is the only channel where I've seen someone use solder.
@@jrpipik Many feel that using solder increases the heat transfer through the metal of the fret. Some think it makes no difference, others think it does make a difference. YMMV, right?
@@kcmsterpceThanks!
@@jrpipik the solder retains the heat on the fret
No wayy. This is the first time I’ve seen someone replacing the fingerboard on guitar. Most luthier here in my country they always saying no whenever i ask them to replace my fingerboard 😩. You are such a talented luthier Tanya. You really did a great job 👏👏
That was beautiful,meticulous work,true craftsmanship.
На это можно смотреть вечно) мастерская работа!💪
Is this cheaper than a new neck?
I don't think so, I think it's a bass of a certain value, by doing it this way it can still be considered completely original. Replacing It with a new neck would cause the lost of almost all its value
Always wondered how a truss rod replacement looked. Very cool.
I knew a truss rod replacement is hard and expensive, now I know why… Very interesting to watch, and what a beautiful result!
Insanely skilled work. I had no idea all this could even be done!
Superb job. Wonderful to watch a true expert at work. Thank you.
Such patience, and a brilliant result. I have a 72 Jazz Bass that someone put a fretless fingerboard on (sometime before 2001). I have no idea who but it's a great job. With that in mind I took my prized 78 Precision Bass to Jim Fleeting (Stockport, England). He did the same and although the barbed frets caused problems the end result is incredible. Smooth and balanced all over. I lose patience changing strings so Big Shout out to the luthiers.
That was incredible to behold! Thank You for posting this video. Truly amazing craftsmanship AND also great camera work as well. Was a pleasure
back in my punk rock days i destroyed a few necks, but i only bent a truss rod like that once on a gibson melody maker.
Holy schmoly! Girl, you know your stuff! Awesome job! How I wish I could do this. I love your attention to detail and how you take your time and do it right!
Leo never expected that on one of his bolt on swappy necks. Absolute top performance here!
That was terrifying and beautiful to watch. Thank you for rescuing it. ❤