The Muffin Man gives us a break down of his newest addition to the Bakery, a self-built tire hammer.
Пікірлер
I to made mine at the Virginia Insitute of Blacksmithing also it was a fun build met new friends and what a life saver it is in the shop. I Love it!!
@turso3622 жыл бұрын
Hell yea man, love my tire hammer! Built mine in the class in Louisiana
@w.crumbladesmith5020 Жыл бұрын
MUFFIN MAN RULES 🤘🏽
@charlie44854 Жыл бұрын
I would love to take that class. I have always liked that kind of hammer for the money. Don't know when they will have a class near me in Maine.
@kylejones90892 жыл бұрын
Excellent overview vid! I was wondering whether during the class there was any discussion of spring selection/alternatives? I'm in Australia and getting that MSD spring is a bit of a problem. Many thanks!
@lachywocky2 жыл бұрын
Thanks! I can't recall any alternative spring discussion. It's a pretty specific spring size. I'd have to ask where they came from, But I've also seen builds that have used coil springs off of older motorcycles or snowmobiles. Hope that helps!
@MuffinManMetalworks2 жыл бұрын
@@MuffinManMetalworks thanks for the reply, im going to see what i can find from a bike hopefully close. Ill see what msd quote me for shipping but im scared! Cheers
@lachywocky2 жыл бұрын
@@MuffinManMetalworks thanks, i ended up just sourcing the correct one! Save the muck about.
@lachywocky2 жыл бұрын
Nice
@ardenartisticwroughtiron2 жыл бұрын
Such a cool way to put power hammers into the hands of regular guys that don't have 8-10k to throw at one!
@smaqdaddy2 жыл бұрын
I highly recommend the class to anyone interested in building one!
@MuffinManMetalworks2 жыл бұрын
awesome video muffin man how many hour ride was it down there i was gonna take the class im here in CT southbury actually your in danbury right ? i just built a 10'x20' shop but dont have a concrete floor how thick of a slab is recomended? sorry for all the questions awesome video just subbed and liked Mark 👍👍
@Anderson-HandForged2 жыл бұрын
Thanks! The Virginia Institute of Blacksmithing is in Waynesboro, VA. It was just under a 7 hour ride. The hammer itself weighs just under 1,000 pounds, with a 70 pounds ram weight. So I'd pour a slab somewhere between 5 and 6 inches for the whole shop.
@MuffinManMetalworks2 жыл бұрын
Hello)) please tell me the diameter of the anvil (probably 20 centimeters), and welded square pipe 16 centimeters? - do I have correct guesses?
@monsterappp5512 жыл бұрын
I'm thinking about purchasing Clay's plans, since I don't have the possibility of going into one of those workshops but i'd like to build my power hammer off a well tested design. ¿How are the plastic plates held and adjusted in this design?
@cerocero28172 жыл бұрын
they're held in with welded tabs at the top of the ram guide tube
@MuffinManMetalworks2 жыл бұрын
Espetáculo 👏 👏 👏
@gilbertoamorimgomes3157 Жыл бұрын
is the plastic uhmw?
@big_ginger79011 ай бұрын
How thick is the concrete floor? I have a 4" slab in an attached garage. Wondering if I could make this work at home vs building a new shop.
@MrMakto Жыл бұрын
4 inch slab should be fine for something like this. This hammer has a 70 pound ram weight. You can also use any kind of rubber sheet or thin plywood as a spacer in between to really eliminate any chance of floor damage
@MuffinManMetalworks Жыл бұрын
How big is it from the ground to the center of the wheel?
@kidneybarbosa75102 жыл бұрын
It's just over 5 1/2ft. tall
@MuffinManMetalworks2 жыл бұрын
Hi My Friend I have watched your video a couple of time, I Contacted Marylou at Kens Ironworks to do the Hammer build cours just to get the costs etc. Do you have plans for the hammer?. any help would be fine...
@tomayrscotland68902 ай бұрын
This is a Clay Spencer designed tire hammer. He has a website, plan, and dies for this hammer readily available
@MuffinManMetalworks2 ай бұрын
??? how dose it adjust for height of things u put in there to hit
@littlehills73911 ай бұрын
there is no height adjustment. Unless you want to raise it off the ground more.
@MuffinManMetalworks11 ай бұрын
🤠👍🏻🙏🏻
@SchysCraftCo.2 жыл бұрын
How much did this cost if you don't mind me asking. Thx
@jarrodfillmore28672 жыл бұрын
The class costs $2750 now I believe
@MuffinManMetalworks2 жыл бұрын
That’s cheap
@busterthompson45202 жыл бұрын
Who puts on these classes?
@jwoodward17765 ай бұрын
They’re in different parts of the US throughout the year. You should have some luck just searching “Clay Spencer tire hammer classes” in a google search
@MuffinManMetalworks5 ай бұрын
Get some of the lube for a marine forklift. Sticks and lubricates, might be carcinogenic.
@joeKisonue Жыл бұрын
If your interested in a power hammer such as this one PM me and we can discuss pricing and shipping. Canada and USA only
@undercoverhustler37 Жыл бұрын
Is male 'vocal fry' a necessary thing these days?🤔
I to made mine at the Virginia Insitute of Blacksmithing also it was a fun build met new friends and what a life saver it is in the shop. I Love it!!
Hell yea man, love my tire hammer! Built mine in the class in Louisiana
MUFFIN MAN RULES 🤘🏽
I would love to take that class. I have always liked that kind of hammer for the money. Don't know when they will have a class near me in Maine.
Excellent overview vid! I was wondering whether during the class there was any discussion of spring selection/alternatives? I'm in Australia and getting that MSD spring is a bit of a problem. Many thanks!
Thanks! I can't recall any alternative spring discussion. It's a pretty specific spring size. I'd have to ask where they came from, But I've also seen builds that have used coil springs off of older motorcycles or snowmobiles. Hope that helps!
@@MuffinManMetalworks thanks for the reply, im going to see what i can find from a bike hopefully close. Ill see what msd quote me for shipping but im scared! Cheers
@@MuffinManMetalworks thanks, i ended up just sourcing the correct one! Save the muck about.
Nice
Such a cool way to put power hammers into the hands of regular guys that don't have 8-10k to throw at one!
I highly recommend the class to anyone interested in building one!
awesome video muffin man how many hour ride was it down there i was gonna take the class im here in CT southbury actually your in danbury right ? i just built a 10'x20' shop but dont have a concrete floor how thick of a slab is recomended? sorry for all the questions awesome video just subbed and liked Mark 👍👍
Thanks! The Virginia Institute of Blacksmithing is in Waynesboro, VA. It was just under a 7 hour ride. The hammer itself weighs just under 1,000 pounds, with a 70 pounds ram weight. So I'd pour a slab somewhere between 5 and 6 inches for the whole shop.
Hello)) please tell me the diameter of the anvil (probably 20 centimeters), and welded square pipe 16 centimeters? - do I have correct guesses?
I'm thinking about purchasing Clay's plans, since I don't have the possibility of going into one of those workshops but i'd like to build my power hammer off a well tested design. ¿How are the plastic plates held and adjusted in this design?
they're held in with welded tabs at the top of the ram guide tube
Espetáculo 👏 👏 👏
is the plastic uhmw?
How thick is the concrete floor? I have a 4" slab in an attached garage. Wondering if I could make this work at home vs building a new shop.
4 inch slab should be fine for something like this. This hammer has a 70 pound ram weight. You can also use any kind of rubber sheet or thin plywood as a spacer in between to really eliminate any chance of floor damage
How big is it from the ground to the center of the wheel?
It's just over 5 1/2ft. tall
Hi My Friend I have watched your video a couple of time, I Contacted Marylou at Kens Ironworks to do the Hammer build cours just to get the costs etc. Do you have plans for the hammer?. any help would be fine...
This is a Clay Spencer designed tire hammer. He has a website, plan, and dies for this hammer readily available
??? how dose it adjust for height of things u put in there to hit
there is no height adjustment. Unless you want to raise it off the ground more.
🤠👍🏻🙏🏻
How much did this cost if you don't mind me asking. Thx
The class costs $2750 now I believe
That’s cheap
Who puts on these classes?
They’re in different parts of the US throughout the year. You should have some luck just searching “Clay Spencer tire hammer classes” in a google search
Get some of the lube for a marine forklift. Sticks and lubricates, might be carcinogenic.
If your interested in a power hammer such as this one PM me and we can discuss pricing and shipping. Canada and USA only
Is male 'vocal fry' a necessary thing these days?🤔