KZhead

Soldering Jewelry for Beginners

Mitera Made Jewelry
2023 ж. 25 Мам.
36 077 Рет қаралды
Жүктеу

Everything I wish I would have known before learning how to solder jewelry! I made so many mistakes when it came to soldering and melted more silver that I would like to admit! I hope these soldering tips can help your jewelry making journey! You can also visit my Amazon storefront below to shop a lot of the soldering equipment I talk about and use in this video. I do make a small commission off of purchases made through this link at no cost to you!
Amazon Storefront: www.amazon.com/shop/miteramad...
#soldering #solderingjewelry #smalljewelrybusiness #jewelrymaking #makingjewellery #silversmith
Socials:
Instagram: / miteramade
TikTok: www.tiktok.com/@miteramade?is...
🌿WEBSITE🌿 miteramade.com/

Пікірлер

  • I’m an old lady who is struggling with soldering my silver jewelry. I am so close to giving up. Your video is wonderful! Thank you, so much!

    @tanaeatlee7989@tanaeatlee79894 ай бұрын

  • So glad to see more and more jewelers with youtube channels

    @soonseen12@soonseen1211 ай бұрын

    • Thank you! Yes there are really talented jewelers here on KZhead to learn from! 😊🎉💜

      @MiteraMade@MiteraMade11 ай бұрын

  • The growth of your channel is incredible, we are already more than three hundred. When I signed up there were less than a hundred of us, and that was just two weeks ago. Surely your channel will reach incredible brands and in a short time. Congratulations.

    @Stanley-xd1gf@Stanley-xd1gf11 ай бұрын

    • You’re so sweet! Thank you, yes I’m just so happy that people find it valuable or entertaining 🥹 everyone has been SO INSANELY supportive over here on KZhead! Supportive, helpful, given me greet advice, genuine constructive criticism, I’m very thankful. Thank you for being here! 🥹🙏🏻

      @MiteraMade@MiteraMade11 ай бұрын

    • I was just thinking the same! ❤

      @NohohonFTW@NohohonFTW11 ай бұрын

  • Can you make a video about how your journey started and the first few important tools and materials needed to start learning jewellery making. Loved this video 💞

    @priyankaraghunathan2625@priyankaraghunathan262511 ай бұрын

    • Thank you for the idea! 🥰💕 I just filmed how my entire journey started up until now, I will also make a video with some of the tools you need to start! 🫶🏼☺️ thank you 💕

      @MiteraMade@MiteraMade11 ай бұрын

  • Thanks! This is useful. I do wirewraps and have been avoiding soldering because it felt scary. But now that I want to wirewrap a more complicated work, I do think soldering will come in handy!

    @Houseofhealer@HouseofhealerАй бұрын

  • Thank you for sharing this information! ❤

    @TwinTransfusion@TwinTransfusion7 ай бұрын

    • Anytime!! 💜 I’m glad you found it helpful 💜

      @MiteraMade@MiteraMade7 ай бұрын

  • Thank you so much for making this positive video! I’ve been struggling with soldering too! Your video was very informative and helpful!

    @deonaboyle7651@deonaboyle76515 ай бұрын

    • I’m so happy to hear that, thank you! 🥹

      @MiteraMade@MiteraMade5 ай бұрын

  • This was such a clear video. I have been having a hard time with Sauter and have not had solder paste work for me. What I find is the soldering wire tends to work best. I will keep watching your videos for more tips because I am just getting started

    @jessicagrill425@jessicagrill4253 ай бұрын

  • So helpful. Thank you so much. I’m such a beginner and this really helped me!

    @kking07@kking075 ай бұрын

    • You’re so so welcome, I glad I could help! 💜

      @MiteraMade@MiteraMade5 ай бұрын

  • thanx for this guide😘

    @Firstfloyd@Firstfloyd4 ай бұрын

    • Of course, glad to help! ☺️

      @MiteraMade@MiteraMade4 ай бұрын

  • Learned a lot, thanks

    @user-th3xk6to9j@user-th3xk6to9j5 ай бұрын

    • I’m so glad!! And you’re very welcome ☺️

      @MiteraMade@MiteraMade5 ай бұрын

  • Supported you 100% , Great content and keep going dear 👍👍👍👍👍👍

    @KakronaArtIdea@KakronaArtIdea11 ай бұрын

    • Thank you so so much! 🙏🏻🥹

      @MiteraMade@MiteraMade11 ай бұрын

  • Great video I make Gold Grillz and this video was extremely helpful🙏🏿

    @briannapierce805@briannapierce805Ай бұрын

    • I’m happy I can help 🥹

      @MiteraMade@MiteraMadeАй бұрын

  • Like the desk

    @margaritaramos8532@margaritaramos85327 ай бұрын

    • Thank you!! Facebook market place 🙈🎉🎉

      @MiteraMade@MiteraMade7 ай бұрын

  • Thank you

    @chantel410@chantel4102 ай бұрын

  • Thank you for sharing! I'm replicating aurora's crown with brass, embedding it with diamonds and engravings and open work.....but..... trying to solder brass is tricky and it's just not working out :(

    @maudale@maudale3 ай бұрын

  • LOVE U

    @ArielPoblete-wc4uy@ArielPoblete-wc4uy6 ай бұрын

    • 🙏🏻💜

      @MiteraMade@MiteraMade6 ай бұрын

  • Use hard solder if possible and use solder strip. Clean the strip every time you use it to clean the oxidation off. It's very hard to clean the chips.

    @caroline7832@caroline78326 ай бұрын

    • Great advice thank you! 💜

      @MiteraMade@MiteraMade6 ай бұрын

    • Clean with what? Damp cloth?

      @youcrazywitch@youcrazywitchАй бұрын

  • On the verge of giving up. Last week, I was soldering great. This week, my solder will 👏 not 👏 flow 👏 and I do notunderstand why. I'm doing the exact same steps, using the exact same materials.

    2 ай бұрын

    • I get it, that can be so frustrating, just keep pushing through it! 💜 maybe it could be more of a flame issue or a joint issue? Is your joint super super flush? Are you heating your entire piece and then directing your flame to your joint? Try putting your solder chip under your piece and under the joint and heat from the top 🙏🏻

      @MiteraMade@MiteraMade2 ай бұрын

  • What’s the different between using the honeycomb and using a block for solder block soldering?

    @Galactic_Empire_Ruler@Galactic_Empire_Ruler2 ай бұрын

  • Thanks for all the great information but I wonder if you can use a stainless steel hot pot for the pickle because you were talking about that you can’t use metal ?

    @melmannnnnn@melmannnnnn3 ай бұрын

    • You actually can! Yesterday I didn’t have enough time to let me crock pot heat up, so I put the salt and vinegar in a tiny pot and boiled my ring on the stove and it WORKED!🎉

      @MiteraMade@MiteraMade3 ай бұрын

    • Thank you very much!!! Gonna watch more of you video’s!

      @melmannnnnn@melmannnnnn3 ай бұрын

  • hi i only use hard solder throughout the piece and use the torch very carefully, takes a bit of getting used to but persevere saves a great deal of messing around, if for some reason you have to leave the bench and your working on something and you have a memory like mine as in did i use medium or easy solder or even hard solder use one solder throughout no bother, still say its your lighting 🤣🤣🤣, take care keep well keep safe.

    @albertpartridge2194@albertpartridge219410 ай бұрын

    • Lol that’s true! Sometimes it’s hard to remember what you issued 😂🙈💜 the thing I like about jewelry making is there isn’t really a “right” way that you have to do something, if it works for you than it works and keep on doing it! 🎉🥰💜

      @MiteraMade@MiteraMade9 ай бұрын

  • How do you resolder a join that came undone

    @deanrollinsonmcmorrow1581@deanrollinsonmcmorrow1581Күн бұрын

  • I have a bunch of Ethiopian opal cabochons and want to make rings and don't know where to start or if it'll be cheaper to take them somewhere and have them made? I have no tools to make anything so I would need to purchase everything. 😫

    @Harlow_Khmer@Harlow_Khmer18 күн бұрын

  • What work table do you have ?

    @esliet@eslietАй бұрын

  • Soldering paste comes in different levels as well. What level soldering paste do you start out with when you’re very first learning. And can you use soldering paste on brass components as I wouldn’t wanna practice on Sterling or gold? Thank you so much for this video. Your tips have been very helpful. 😊

    @amccaffrey1443@amccaffrey14433 ай бұрын

    • I’m so glad I can help!! 🥹💜 I used easy solder paste at first! And when I was practicing on brass I used the silver solder paste and it works just fine BUT, they do make solder paste for brass! 😊

      @MiteraMade@MiteraMade3 ай бұрын

  • Her tip If you bezel not right size use a ring Manderl forge it with with gold smithing hammer. Also if you are using solder chip u can make it thin by anelling it with torch then put in rolling mill to make thin has paper. N

    @loganwilson3040@loganwilson304010 ай бұрын

    • Thank you! Those are great tips! ☺️🎉💜

      @MiteraMade@MiteraMade10 ай бұрын

  • what should you do when your trying to solder the bezel strip onto the plate, but the solder rises to the bezel strip instead of the plate?

    @user-ku9gg2wj3d@user-ku9gg2wj3dАй бұрын

    • When you’re making bezel cups heat from below and not the top. If you remember, “solder follows your flame” it will almost always help you figure out what to do differently. 🙏🏻💜 I always heat from the bottom using my grate. Heat the bottom for 90-95%of the time and then when it gets super red and ready, bring your flame to the top of your piece and it will all melt 💜

      @MiteraMade@MiteraMadeАй бұрын

  • What torch do you recommend please?

    @Skullcrusher2131@Skullcrusher21312 ай бұрын

    • I use the Durston butane blow torch

      @MiteraMade@MiteraMade2 ай бұрын

  • I am going to try the solder chip when they come out in chicken flavour. 😛

    @Mass-jab-death-2025@Mass-jab-death-202511 ай бұрын

    • Let me know how it tastes! 🙏🏻

      @MiteraMade@MiteraMade11 ай бұрын

  • Does solder work for any metals or does it have to be sterling silver or gold?

    @jewelrygrace9438@jewelrygrace94386 ай бұрын

    • Some people use silver solder when soldering bronze and that’s ok! So solder can be interchangeable at times but you do generally want to use solder in whatever metal you’re working with. 💜

      @MiteraMade@MiteraMade6 ай бұрын

    • @MiteraMade So a cheap clasp can be soldered?

      @jewelrygrace9438@jewelrygrace94386 ай бұрын

  • Hi.Adri

    @user-LLPp9yy9om4sos@user-LLPp9yy9om4sos7 ай бұрын

    • 👋

      @MiteraMade@MiteraMade7 ай бұрын

  • Hi 🌹👌❤️💕❤️💕🥂🤝

    @FisherHunte-pf8zy@FisherHunte-pf8zy7 ай бұрын

  • Demonstrate Demonstrate Demonstrate.................Z

    @zardiw@zardiw5 ай бұрын

  • You are so sweet

    @aeaissabagnall154@aeaissabagnall154Ай бұрын

    • Thank you 🥲💜

      @MiteraMade@MiteraMadeАй бұрын
KZhead