KZhead
Тәжірибелік нұсқаулар және стиль

[DIY] How to make a jig for cutting thin strips / Table saw project #8 / HOMEMADE

CarpenTAK_DIY Woodworking
2022 ж. 2 Мау.
192 754 Рет қаралды
Жүктеу

How to make a thin strips cutting jig? I made a jig with safety and precision.
Each part was made to be replaceable, and in particular, a handle with a good grip was made with walnut wood and gave a point. For the jig I make, convenience is basic and coolness is essential. haha!!
Made using 18mm birch plywood, walnut wood, 5mm transparent acrylic, and 10mm white acrylic
Enjoy more videos on my channel.
Please support me by subscribing and liking!
I am CarpenTAK from Korea.
Please support the channel by becoming a paid member. Your support helps us create more exclusive content and improve video quality. Thank you for your support!
/ @carpentak

Пікірлер

  • This is an awesome jig!!! This is something every shop should have. I can now make my own veneer for the inlay I do on the pieces I make. Thank you for sharing another great idea with us. I am going to share this with a couple of KZheadrs I follow that I think would love having this in their shop.

    @crossgrainwoodproductsltd9230@crossgrainwoodproductsltd9230 Жыл бұрын

  • I'd just watched another 'thin rip' video, suggesting to the designer that it'd be better if it were to hook over the fence (his relied on a vertical block being pushed down above the blade) ... then I find you've gone and done exactly as I was suggesting ... nice to know I'm not completely thick ... excellent jig 👍

    @barry.w.christie@barry.w.christie Жыл бұрын

  • You are definitely one of the most creative content creators, because you develop solutions instead of just batching out tables (or whatever). Fantastic idea and a great video, as always. Thank you!

    @mullinstech@mullinstech Жыл бұрын

    • Thanks for the nice comment. I enjoy coming up with great ideas and creating them. I want to show better videos to my subscribers, so I keep preparing.

      @carpentak@carpentak Жыл бұрын

  • Excellent! Excellent! Excellent! You do such nice work! Thank you for sharing this with us. The sticky tape is a wonderful idea!

    @markhedquist9597@markhedquist9597 Жыл бұрын

  • ¡¡FANTÁSTICO!! MUY BIEN...

    @CarlosMoreno-mr5me@CarlosMoreno-mr5meАй бұрын

  • thank you, my friend, I am Armenian, but I live in Russia, I have a cnc machine and I like to make all sorts of devices. I'm not a carpenter or a carpenter, I just like to make souvenirs sometimes on a CNC machine made of wood. That's why I make all sorts of devices for myself. I have collected about 30 species and some of them have already been made. For myself, I made a sawing table and tools for it. I make all the programs for the cnc machine myself and cut everything on the machine-from which I get satisfaction. My friend has also modeled this device, and as soon as I get home, I will make it. I took a lot of interesting things from you, I think I can make such a machine))) She's just very professional and I don'T NEED that))) MANY THANKS TO YOU AND THOSE PEOPLE WHO SHARE THEIR CREATIVITY. Here I would like to show the dimensions too, otherwise I sit and invent all the dimensions myself and that's all approximately)) Good luck to you in your business👌👋🖐👋👌

    @tat-form2943@tat-form2943 Жыл бұрын

  • Thank you.

    @MrKYT-gb8gs@MrKYT-gb8gs4 ай бұрын

  • that is just plain genius

    @thefilthelement@thefilthelement2 ай бұрын

  • What a beautifully made jig, great vid and some excellent tips and methods, Thank you

    @BDL090754@BDL090754 Жыл бұрын

  • Fantastic, beautiful work. Great engineering. I will use this often. Thank you.

    @stevesyncox9893@stevesyncox9893 Жыл бұрын

  • Great jig. I had an idea for a similar jig and will definitely incorporate some of these ideas into mine.

    @bigredracingdog466@bigredracingdog4664 ай бұрын

  • 정말 대박 입니다. 하나하나 만드시는 도구들 마다 다 따라하고싶네요!!

    @jo-starsys@jo-starsys Жыл бұрын

    • 소중한 댓글 감사합니다. 완전히 똑같이 만들기 어려우심 핵심 기능만 따라하시고 나머진 심플하게 만드셔도 좋습니다. 저는 영상에 볼거리를 위해서 과하게 멋을 좀 부립니다.ㅋ

      @carpentak@carpentak Жыл бұрын

  • So creative a beautiful and safe jig

    @bradleytuckwell4881@bradleytuckwell4881 Жыл бұрын

  • Magnifique vidéo . Very good job and i love all. Congratulations.

    @joelrob8606@joelrob8606 Жыл бұрын

  • Very creative work. Thanks for sharing this video with us 🙏🏼

    @alsaffarstudios@alsaffarstudios Жыл бұрын

  • Great work 👏🏼👍🏼👍🏼👏🏼👍🏼thank you

    @carlosrodriguezjr80@carlosrodriguezjr80 Жыл бұрын

  • Excellent skill level. Excellent Jig. Best Wishes and Love. From India.

    @imareare1949@imareare1949 Жыл бұрын

  • Brilliant piece of work bro..

    @reaper060670@reaper060670 Жыл бұрын

  • Thank you so much. Very nice tool. Your videos just keep getting better and better ... ok

    @kurtbergman4491@kurtbergman4491 Жыл бұрын

    • Thank you for your valuable comments. Your interest and support is a great help to me. .....ok!!

      @carpentak@carpentak Жыл бұрын

  • Genius!

    @dwayneford1990@dwayneford19906 ай бұрын

  • Perfect 👍🏽

    @highcreation5254@highcreation5254 Жыл бұрын

  • amazing and safe jig ...

    @crafts_avenue@crafts_avenue Жыл бұрын

  • Y're a genius

    @mope7647@mope7647 Жыл бұрын

  • Top. Profi 👌

    @j.guteDinge@j.guteDinge Жыл бұрын

  • Muy buenos tus videos

    @jorgedelucca1387@jorgedelucca1387 Жыл бұрын

  • 역시!!!!OK!!!

    @user-rt3rk9sg2u@user-rt3rk9sg2u Жыл бұрын

  • THANK YOU!!!

    @jdh3777@jdh37774 ай бұрын

  • Super gebaut.

    @norbertkern8285@norbertkern8285 Жыл бұрын

  • 구독 좋아요 꾹꾹 누르고 시청하고 있습니다 좋은정보 감사합니다 선생님 채널도 번창하세요

    @user-jk6xi2zg5y@user-jk6xi2zg5y Жыл бұрын

    • 소중한 댓글 감사합니다. 이렇게 응원해주시는 분들 덕에 오늘도 힘내서 영상 작업 하고 있습니다. 이런 응원이 제게 큰 힘이 됩니다. 감사합니다.

      @carpentak@carpentak Жыл бұрын

  • 영상 잘 봤습니다 또 오겠습니다!!

    @TTAJ@TTAJ Жыл бұрын

  • Brilliant as always. Long shot I'm not a carpenter I just mess about with wood but I was wondering, hoping you could make one of those planes for me .I am from Ireland

    @franlynam9406@franlynam9406 Жыл бұрын

  • Good job

    @LordHog@LordHog Жыл бұрын

  • 👌Okay

    @DarikX74@DarikX749 ай бұрын

  • Merci beaucoup pour la vidéo

    @keupondestroy911@keupondestroy911 Жыл бұрын

  • Simple and effective. OK!

    @mikegilyeat3213@mikegilyeat3213 Жыл бұрын

  • saludos desde MÉXICO ALL YOUR WORKS ARE CABINETMAKER NOT CARPENTER BECAUSE THEY ARE VERY DETAILED FELICIDADES

    @juliantapia6527@juliantapia6527 Жыл бұрын

  • Another great idea. By the way I was able to find a table saw blade with a wider kerf. Similar to a dado, with just two blades. Referred to as a bax tenon blade.

    @chrismorgan6898@chrismorgan6898 Жыл бұрын

    • kzhead.info/sun/ntqSqKZtsHSIno0/bejne.html 02:28 Coming out here for a moment. It is one blade 8mm thick.

      @carpentak@carpentak Жыл бұрын

    • @@carpentak Thank you for the information

      @chrismorgan6898@chrismorgan6898 Жыл бұрын

  • I can't help but notice the divot in the right-hand cast iron plate on your table saw. Mine is a solid rectangle 13" wide.

    @edreusser4741@edreusser4741 Жыл бұрын

  • What is the clear sticky material that you used to grip the wood pieces? I have not seen this before. Great videos by the way. I really enjoy your content.

    @jeffhallford5284@jeffhallford5284 Жыл бұрын

    • thank you. what you asked is this a.co/d/82LaLiU

      @carpentak@carpentak Жыл бұрын

  • 👏👏👏👏👏

    @joaolima7468@joaolima7468 Жыл бұрын

  • 너무나도 유용한 지그 입니다. 한가지 질문이 있습니다. 테이프 높이 만큼 톱날을 셋팅해야 하는 것 같은데, 톱날을 약간 높게 셋팅하면 톱날이 플라스틱의 일부를 자르지 않나요? 톱날이 약간 더 높아도 플라스틱을 자르지 않을 방법이 있을까요?

    @myeongseokkim2813@myeongseokkim2813 Жыл бұрын

    • 톱날이 테이프를 살짝 자르게 세팅하는거구요. 아크릴 살짝 잘리더라도 괜찮습니다. 테이프 두께는 2mm 아크릴 두께는 5mm 이니까 여유가 좀 있습니다. 실리콘 테잎은 쓰다가 교체하는 거구요.

      @carpentak@carpentak Жыл бұрын

  • Do our have plans for thr thin strip jig

    @user-hx9fx1gx4q@user-hx9fx1gx4q7 ай бұрын

    • hello. I can't make a plan. And since I worked on this jig a long time ago, I don't have any photos of the process. Video is everything. It's not complicated, so I think you can do it by watching the video and following along. Thank you for your support.

      @carpentak@carpentak7 ай бұрын

  • What a great accessory! I will definitely try to make one. I recently took strips out of a sapelly plank (16mm) and as I cut them I could see how they twisted. Could you tell me what it is due to? and more importantly, how can I straighten them? Thank you very much.

    @susurrosjoe6817@susurrosjoe6817 Жыл бұрын

    • Wood that is less dry will become deformed. Since this cannot be prevented, store them in large pieces if possible, and cut only as much as necessary. Twisted strips must be corrected with a jointer planer and an automatic planer. It's very difficult with a hand planer. If the condition is severe, it is better to give up.

      @carpentak@carpentak Жыл бұрын

    • @@carpentak Thank you very much for the answer friend, it is very helpful. What plastic is the white you use for the fence extension of the other video? What blade do you cut it with?

      @susurrosjoe6817@susurrosjoe6817 Жыл бұрын

    • This is plain white acrylic. Of course, there are acrylic saw blades on the market, but I just cut them with a wood saw blade. no problem in particular

      @carpentak@carpentak Жыл бұрын

    • @@carpentak White acrylic do you mean PTFE? In my country acrylic can be any plastic. How many teeth does the disc have? I have a 60 tooth and maybe I will buy an 80 tooth. Thank you very much again, you are very kind.

      @susurrosjoe6817@susurrosjoe6817 Жыл бұрын

    • I don't know if PTFE is right. Here in Korea, they just call it acrylic. My disk has 80 teeth. 60 discs would be good for cutting plastic.

      @carpentak@carpentak Жыл бұрын

  • You used some sort of wide tape that was in a roll. It appears to be contact peelable on one side but not so sticky on the bottom side. Can you elaborate as to what it is called? I understand everything else in your video but I've not seen that before. Once again, a wonderful demonstration.

    @rayscrafield2106@rayscrafield2106 Жыл бұрын

    • a.co/d/aaHvd48 thanks for the nice comment

      @carpentak@carpentak Жыл бұрын

  • Couldn’t make that - I’ve not got enough machines !

    @brynnhowell9916@brynnhowell9916 Жыл бұрын

  • muito fixe

    @joaoluis1744@joaoluis1744 Жыл бұрын

  • Massa.

    @pacificoartes9758@pacificoartes9758 Жыл бұрын

  • احلا بصمة لك 👍👍👍❤🌷بالثوفيق الدائم مرحبا بيك ويدوم التواصل مرحبا

    @chhiwattatanajat6729@chhiwattatanajat6729 Жыл бұрын

  • Excellent! What is that glue for the clear plastic sheets?

    @kimchee94112@kimchee94112 Жыл бұрын

    • thank you The glue is an acrylic-only bond.

      @carpentak@carpentak Жыл бұрын

  • 👍👍 👍 👍 👍👍

    @ycaroovoador7744@ycaroovoador7744 Жыл бұрын

  • Nice Video, what kind of clear grippy tape did you use on the bottom of the acrylic?

    @martyjosephson4937@martyjosephson4937 Жыл бұрын

    • a.co/d/0Oifadq

      @carpentak@carpentak Жыл бұрын

  • Disculpen pero hablo español. Quiero saber que material es ese que usan de color blanco

    @PercyMendoza@PercyMendoza Жыл бұрын

  • Does the blade cut the bottom of the plexie hold down (where the 2 sided tape is) when you run a pass?

    @williammc63@williammc63 Жыл бұрын

    • That's right, it's holding down and it's adhesive enough to hold it in place.

      @carpentak@carpentak Жыл бұрын

    • Does the saw blade cut the Plexi jig when it passes over it?

      @williammc63@williammc63 Жыл бұрын

    • @@williammc63 Set the height of the saw blade to be the same as the height of the part. Then just cut off the sticky tape.

      @carpentak@carpentak Жыл бұрын

  • Do you have to use acrylic for the shield?

    @natasharose6889@natasharose68896 ай бұрын

    • You can just use plywood. Transparent acrylic is good, but plywood is also fine.

      @carpentak@carpentak6 ай бұрын

  • 😃😃😃

    @sergueiothonucci1638@sergueiothonucci163818 күн бұрын

  • جيد جدا

    @MohamedMostafa-ul1ey@MohamedMostafa-ul1ey Жыл бұрын

  • Hello, how are you? I wanted to know what material is that you are using to make the parallel guide the white material.

    @PercyMendoza@PercyMendoza Жыл бұрын

    • This is white acrylic. I don't know if they call it differently in other countries. There are many places that sell acrylic here in Korea.

      @carpentak@carpentak Жыл бұрын

  • Where can I get the uhmw adhesive it looks like you are using?

    @danimalmaxasis2762@danimalmaxasis2762 Жыл бұрын

  • Buongiorno, spero possa rispondere a una domanda, stavo cercando il video (se esiste) della seconda sega circolare, quella affianco alla Dewalt, ma non lo trovo, potrebbe darmi una risposta? Grazie Ottimi lavori compliments... 🤗👏👏👏👏

    @doubleamaker8643@doubleamaker8643 Жыл бұрын

    • hello. It is my second table saw with an 8mm thick saw blade that I use exclusively for grooving. Unfortunately, it didn't leave a video. thank you

      @carpentak@carpentak Жыл бұрын

    • @@carpentak ok grazie per la risposta. Mi spiace moltissimo che non ci sia un video, avrei voluto replicare il Vs video, sarebbe stato interessante vedere come hai fatto... Sei un ottimo artigiano e con molta inventiva e ottimo ingegnere. 👏👏👏👏

      @doubleamaker8643@doubleamaker8643 Жыл бұрын

  • Okay.

    @lukafilm@lukafilm Жыл бұрын

  • Tolong jelas kan lebih detail. Cara membuat atau pun itu. Indonesia. 🙏

    @muhammadalbinurhaqi5178@muhammadalbinurhaqi5178 Жыл бұрын

  • How is the blade not cutting into the plexiglass?? I dont see a gap for it to pass through.

    @sbb526@sbb52611 ай бұрын

    • I set the saw blade height only 1mm higher. Then the acrylic cover won't cut.

      @carpentak@carpentak11 ай бұрын

    • @@carpentak won't it still cut 1mm into the acrylic?

      @sbb526@sbb52611 ай бұрын

    • 1mm is no problem. A 3mm thick transparent tape is also attached to the acrylic.

      @carpentak@carpentak11 ай бұрын

  • 🤔😉🤝👍🙋‍♂️

    @user-uo1ky4cl4s@user-uo1ky4cl4s Жыл бұрын

  • Bonjour pouvez vous me donner le nom du matériau blanc que vous utiliser et que vous avez sur votre guide de chaque côté merci Cordialement

    @jacquesbreton7676@jacquesbreton7676 Жыл бұрын

    • It's a plastic material here in Korea called acrylic.

      @carpentak@carpentak Жыл бұрын

  • всё очень красиво...вот же "сукин сын"...аккуратность..точность..=красота

    @sergnemo2379@sergnemo2379 Жыл бұрын

  • !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    @user-sn1lx1mt5c@user-sn1lx1mt5c Жыл бұрын

  • Film o 8 minut za długi imo.

    @1r3k1970@1r3k1970 Жыл бұрын

  • Do you sell the things you make?

    @marciac5892@marciac5892 Жыл бұрын

    • I am not selling.

      @carpentak@carpentak Жыл бұрын

  • Полоски сколько миллиметров?

    @user-dl9fh7kp2n@user-dl9fh7kp2n Жыл бұрын

    • 이것은 2mm 까지 가능 합니다

      @carpentak@carpentak Жыл бұрын

  • извращенец 😀

    @sergeyr2475@sergeyr2475 Жыл бұрын

  • Sorry but I am not clairvoyant , maybe someday when your able to communicate I can enjoy the video ,till then adios

    @robertsmith3518@robertsmith35184 ай бұрын

  • 1970 called. Can they have their wristbands back please.

    @Xanderbelle@Xanderbelle Жыл бұрын

  • Yeah great jig but the personal safety on show is horrific . Does just about everything you should not do with a bench saw when cutting timber

    @035746uk@035746uk3 ай бұрын

  • Que buena manera de perder tiempo !! En cosas inútiles 😜😂😂😂😂

    @geraquiro9564@geraquiro9564 Жыл бұрын

  • Terrible...

    @jorgegarbin3907@jorgegarbin3907 Жыл бұрын

  • 👍👍👍👍

    @gillesmarange991@gillesmarange991 Жыл бұрын
KZhead