KZhead

TORN APART Axe Restoration

Awesome Restorations
2024 ж. 14 Мам.
7 041 534 Рет қаралды
Жүктеу

Axe Restoration where I restore a double bit axe who is torn apart and have broken edges with lots of dents.
ABOUT THE AXE
This a is a double bit axe from Gränsfors Bruk in Sweden. It is based on a North American working axe but are often used as a throwing axe because it rotates very well in flights. Both edges are identical, and the centre of gravity is carefully positioned. It weights around 2,3 kg.
This one was given to me by the guy at the metal dumpster a few years back. It was not that rusty back then, but I admit that the axe head has been laying outside on my working bench in the harsh Nordic weather for a few years.
Both the edges on the axe head have been mistreated very badly and got big dents. The middle of the head has literally been torn apart or cracked maybe during the very cold conditions here in Sweden. We have around -30 degrees Celsius sometimes during wintertime. Now is the time to restore this beauty of a tool back to awesome.
ABOUT THE AXE RESTORATION
I started by removing the silly stick I used as a temporary handle for the axe. After that I gave the double bit axe head a very nice high-pressure 130PSI sandblasting. I used aluminum oxide as my blasting media.
Both the edges on the axe head have been mistreated very badly so there was a lot of big dents. I choose to repair the dents by welding new material on the edges. After I grinded the excess material away the edges looked very good again.
I also welded the big crack there went all the way through the front side of the axe head. I used stick welding for this repair because the metal was much thicker there compared with the edges. After I had done all the repairs, I hardened the edges of the axe and did a quick cleaning job after the heating process.
I gave the edges a nice polish on my flip table bench polisher machine and did some cool laser engravings on the side of the head.
I had a handle that I adjusted to fit for this project and finally I gave the handle some Nordic teak oil.
I am really satisfied with this Awesome Restoration. I think that this came out perfect and the engravings really gives it that Nordic Forest touch!
SUPPORT ME AND GET AN AWESOME T-SHIRT
You can support my channel and become AWESOME by buying an Awesome t-shirt thru this link: awesome-restorations.creator-...
Please subscribe if you want to see more cool upcoming restoration videos 🙂 You can see how I build the Nordic hammer that I use in this video 👉 • NORDIC HAMMER Rebuild 👈
Thanks for watching my channel. See you soon.
Best wishes and stay safe ❤ Martin

Пікірлер

  • The sandblasting section is always my favorite. It's so satisfying watching the rust magically disappear.

    @BeyondTheQuest@BeyondTheQuest Жыл бұрын

    • yes it really is satisfying to watch :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • I agree

      @MikeB-zs8nd@MikeB-zs8nd Жыл бұрын

    • I had a sand blaster for years and loved it till I had to retire used to clean rust and old paint off of a lot of things it required a 30 gallon air compressor.

      @ernestwilliams268@ernestwilliams268 Жыл бұрын

    • ​@@AwesomeRestorations Why did you censor the welding flash? Is it considered inappropriate graphic material?

      @momo1461@momo1461 Жыл бұрын

    • ​@@momo1461 flashing is inappropriate 😂

      @gobarg95@gobarg95 Жыл бұрын

  • T-850 and i really enjoy watching you restoring things it's so satisfying to watch something broken and nearly destroyed gets restored to it's former glory

    @adamtaurus8315@adamtaurus8315 Жыл бұрын

    • Thanks Adam - I really appreciate it :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • the T-850 has an armored endo skeleton. by specs that looks far more like the original t-800 as seen in t-2.

      @pauleasley6488@pauleasley6488 Жыл бұрын

  • Any channel who covers the light on the welding spot deserves this free comment to help the video! Keep up the good work!

    @TheOnlyTherazan@TheOnlyTherazanАй бұрын

    • thanks a lot 😊

      @AwesomeRestorations@AwesomeRestorationsАй бұрын

  • The condition of that axe makes you wonder what he was fighting with. You definitely resurrected this axe and then went one step further and made it look magnificent.

    @jenksify@jenksify Жыл бұрын

    • thank you so much I am glad you think so :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Is nobody going to talk about how he always puts eye protection on the things that are very bright just brilliant

    @fawazismail6583@fawazismail6583 Жыл бұрын

    • I was going to say that, it’s so nice that he does that, absolute masterclass

      @dreg1031@dreg1031 Жыл бұрын

  • Спасибо, дорогой друг, за доставленное удовольствие. В очередной раз смотрел, как ты колдуешь над ржавым куском металла и восхищался твоей работой. Удачи тебе и крепкого здоровья.

    @user-yp2eu3hz4f@user-yp2eu3hz4f Жыл бұрын

    • Thank you so much 👍

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Honestly, thank you very much, never have i seen a you-tuber cover the bright arc while welding, very considerate of you, love all your videos

    @delta0044@delta00446 ай бұрын

  • I would totally raid a medieval village with that, friend. 🏰 Thank you for video

    @viawilderness@viawilderness Жыл бұрын

    • Thanks - buddy 🧑‍🎄

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Отличная работа💪🏼👍🏼наблюдать за процессом, отдельное удовольствие👌🏼 спасибо за видео👏🏼

    @BONvivan8@BONvivan8 Жыл бұрын

    • thank you very much I really appreciate it :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • There is something very relaxing about watching your videos. I think it's the way you take your time, and show every detail and process of your work. Outstanding work as always!

    @ryancooper2826@ryancooper2826 Жыл бұрын

    • Wow, thank you!

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • I like the fact that you have beer fridge in your shop. Not a little mini fridge, no no no, a big corner store type cooler. 👍👍

    @colettecamo2844@colettecamo2844 Жыл бұрын

    • Cheers 🍻

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • the beer fridge has 2 kinds and not just some beer lol lol no no the whole fridge is full love it hahahaha..

      @stevebalogh2320@stevebalogh2320 Жыл бұрын

  • That's more than a restoration, it's been reborn as something even greater! Lovely work with this one.

    @ZeroCiaran@ZeroCiaran Жыл бұрын

    • Many thanks!

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • You are now my favorite welder. Never seen someone put the dot there to protect our eyes from the weld. Thank you so much!!!

    @christow7989@christow7989 Жыл бұрын

    • Yes, welding observed on LCD would kill your eyes... how stupid peple are :)

      @xmeda@xmeda Жыл бұрын

    • thanks a lot Chris for your comment and for watching I really appreciate it :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • wait, so can your monitor actually translate the brightness of a welding? Mildly concerned now.

      @tylermech66@tylermech66 Жыл бұрын

    • @@tylermech66 no, it can't

      @MarioMartinazzi@MarioMartinazzi Жыл бұрын

    • @@MarioMartinazzi Didn't think so, but just had to be sure.

      @tylermech66@tylermech66 Жыл бұрын

  • Спасибо огромное за контент, всегда получаю эстетическое наслаждение от просмотра! У тебя золотые руки!

    @nickmaylock94@nickmaylock94 Жыл бұрын

    • many thanks Nick I am very glad that you also like this video 😊

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Oh my god I'm barely one and half minutes into the first video I've seen of you and I'm filled with indescribable joy. Not only was there no long intro but I LOVE not being blinded by the welding!!I love these kinds of videos but they all hurt my eyes from the welding.

    @calebhadley4020@calebhadley40208 ай бұрын

    • thank you so much for watching I am glad you liked it 😊

      @AwesomeRestorations@AwesomeRestorations8 ай бұрын

  • I LOVE the humor in your videos!! Small and subtle details here and there.. Like the bear blinking etc etc..

    @semesterkatten@semesterkatten4 ай бұрын

  • Feeling a little low today, watched another of your amazing restorations was just what I needed as a pick me up, I love the way you tackle each project with the utmost care and attention to produce a work of art from salvaged items. 👌

    @christopherelliott3701@christopherelliott3701 Жыл бұрын

    • Great to hear! Thanks for watching and for your kind words I really appreciate it 👍🙂

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Такой и на стену не стыдно повесить. Отличная работа, каждая реставрация как отдельный вид искусства.

    @deadhunt9783@deadhunt9783 Жыл бұрын

    • Thanks for watching and for your kind words I really appreciate it 👍 and I will hang it on my offices wall very soon 🙂

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • @@AwesomeRestorations Ждем отдельный видеообзор по вашей мастерской.

      @deadhunt9783@deadhunt9783 Жыл бұрын

    • @@deadhunt9783 да, было бы неплохо!

      @oleg_konovalov@oleg_konovalov Жыл бұрын

  • Piece of art 👌🏻 Thank you Martin for sharing your talents … we’re waiting for more

    @ghassanali4455@ghassanali44557 ай бұрын

    • thank you so much 😊

      @AwesomeRestorations@AwesomeRestorations7 ай бұрын

  • I worked for a guy like you as a burn table operator. He was a true artist, as are you. The sticker in the back window of his Ford read just weld it. You guys don't know what an obstacle is. Just opportunities. It's a pleasure to watch you work.

    @headsup5819@headsup5819 Жыл бұрын

    • thank you so much for your kind words 😊

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • This is a pure cosmetic restoration i dont think those edges would last a couple of solid strikes not to mention that crack but aestethically it looks very nice

    @-Anthracite@-Anthracite Жыл бұрын

    • I know nothing about this and was wondering if you can fill me in on why you think it won't last,

      @gregsoad5031@gregsoad5031 Жыл бұрын

    • @@gregsoad5031 he didn't temper the edge. After clenching in water it's going to be incredibly brittle. You have to heat it about 450° f depending on the steel to take some of the stress out and make it more durable

      @OdegardOnline@OdegardOnline Жыл бұрын

    • @@OdegardOnline thank you! 🙏🏻

      @gregsoad5031@gregsoad5031 Жыл бұрын

    • @@gregsoad5031 also mig wire isnt good at hardening. As the steel used for the head is much much harder, so even with proper hardening/tempering the edges that were welded wiill still be considerable soft. Would have been better off just grinding off the chipped edges and letting it sit in evap-o-rust for a few days to find out where the hardening line was and how much he has to work with.

      @DuriensBane@DuriensBane Жыл бұрын

    • @@DuriensBane interesting, how can I learn about all this?

      @gregsoad5031@gregsoad5031 Жыл бұрын

  • Как всегда прекрасная работа, на 5 баллов. 👍👍👍

    @g.n.n.-shorts@g.n.n.-shorts Жыл бұрын

    • Thanks buddy :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • First time seeing your videos, and the editing, restoration, blurred welding, satisfying sandblasting, and everything else makes me wonder why I never found your channel sooner!

    @vwastaken@vwastaken9 ай бұрын

    • Welcome aboard! Glad you liked it 😊

      @AwesomeRestorations@AwesomeRestorations9 ай бұрын

    • Im glad he’s protecting us from that UV light. We all know how phones replicate both visible and invisible portions of the light spectrum.

      @Nakahat01@Nakahat014 ай бұрын

  • I've been chopping wood with two Gransfor Bruk axes for decades. Very nice to see this one put back into service.

    @samlind8330@samlind8330 Жыл бұрын

    • thanks for your comment Sam :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • A very beautiful axe! As always, you have a good restoration! Thanks for the video!

    @Styyll@Styyll Жыл бұрын

  • Love the way the terminator was making sure we're doing it right

    @eleazarmiramontes1722@eleazarmiramontes1722 Жыл бұрын

    • glad you liked that :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Harmonija,sklad,mir...❤️❤️,best regards from Croatia!!

    @markohorvat7529@markohorvat7529 Жыл бұрын

  • Your videos are so well done and your restoration work is superb. So calming! Thank you!

    @rpwbass@rpwbass Жыл бұрын

    • Thanks a lot 👍

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Как всегда вся работа на высоте👍

    @user-hr1kj1wf5c@user-hr1kj1wf5c Жыл бұрын

    • Thank you so much :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Yes i chose the bear! And thanks for your Videos and Teachings Sir!

    @student9137@student9137 Жыл бұрын

  • Great work and project and filming of this! You know your stuff! Artfully done!😁👍🛠️🔧

    @billyfoster3223@billyfoster3223 Жыл бұрын

  • You are not only a restorer, but a magician as well! We both picked the bear! Somehow you knew... hahaha! BTW, your videos are so satisfying to watch. Love it!!

    @quazai26@quazai26 Жыл бұрын

    • Thank you so much :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • That was brilliant! And yes I did pick the bear but I wasn't expecting the design to come out that good. You really do a great job on your projects and the videos themselves. Well done!

    @tanyadolan7560@tanyadolan7560 Жыл бұрын

    • Thank you so much Tanya 😀

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Это здорово! Люблю когда с любовью и теплом чинят старые вещи, восстанавливают. Да, именно восстанавливают, а не выбрасывают!

    @mennen555@mennen555 Жыл бұрын

    • thank you very much I am glad you like it :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • Ну если не считать то что он кромку наплавил из не закаляемой стали и теперь она не держит заточку и вообще мягкая. это даже по звуку обработки слышно.. Это я вам как профессиональный сварщик говорю. Так что это теперь максимум экспонат на стену..

      @qw664@qw664 Жыл бұрын

  • This is no ordinary ax used for chopping firewood, looking at the way he restored it, it contains a whole sky of art.

    @TuanHoang-dl9ms@TuanHoang-dl9ms Жыл бұрын

    • thank you so much :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • Это два топора ссср приварены друг к другу

      @user-pd9bm6tv8e@user-pd9bm6tv8e2 ай бұрын

  • I love your custom engravings and your attention to detail 😎🤟🏻

    @yusufcaglar@yusufcaglar Жыл бұрын

    • Absolutely beautiful. Ready for the zombie apocalypse

      @randomfpv22@randomfpv22 Жыл бұрын

    • Thanks buddy :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • @@AwesomeRestorations .

      @loucurasnoceara3525@loucurasnoceara3525 Жыл бұрын

  • I love axes, especially double-headed ones. They remind me of vikings! Also I thought it was cool how you put a gray spot over the bright sparks to block them!

    @TheSonicFairy@TheSonicFairy Жыл бұрын

    • I did choose the bear actually 😀

      @TheSonicFairy@TheSonicFairy Жыл бұрын

    • Thanks a lot 👍

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • As far as I know only Americans use double headed axes. My family has for generations worked in the Swedish forests around Uppland cutting wood and making charcoal for the ore industry back in the days and I have never heard of anyone using one for real. I agree they look cool but as a tool they are worse than a singel edged one.

      @hnorrstrom@hnorrstrom Жыл бұрын

  • Your art is amazing!!! I really enjoy watching your restorations thank you for putting out great content 🙌🙌🙌

    @ActionPackedCrew@ActionPackedCrew9 ай бұрын

    • Thank you so much 😀

      @AwesomeRestorations@AwesomeRestorations9 ай бұрын

  • Неужели он сразу провёл пескоструйную обработку, без предварительного электролиза, удаления ржавчины канцелярским ножом, без использования соплей единорога??? Действительно Awesome

    @Leningrad_DE@Leningrad_DE Жыл бұрын

    • yes I did sandblasting is king :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • Да вообще много странного.... Во первых ржавчина равномерная, нет глубокой. Наваривать лезвие, тоже интересно чем он это делал, а кромка потом закалится? Шов обычно открывают для заварки... Сначала впоямую в тисках зажимает, делач вмятины, потом вышлифовывает до состояния муха не сидела.... Можно еще много до чего докапываться... А видеоряд красивый... Не поспоришь

      @montvilds@montvilds Жыл бұрын

  • Awesome work my friend. And yes picked bear like you 👍🏽 That hammer of Thor was pretty cool too

    @CoolDude6914@CoolDude6914 Жыл бұрын

    • thanks so much glad you picked the bear :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Man the initial weld on the edge was what blew me away. I don't know how to weld, but I love watching it. And then fixing the middle of it blew me away. And then the bear ! Is there anything you can't do?? Keep up the great work, brother. This is next to none.

    @Clintstagram@Clintstagram7 ай бұрын

    • thank you so much for your comment I really appreciate it 😊

      @AwesomeRestorations@AwesomeRestorations7 ай бұрын

  • I really appreciated the Terminator 2 reference when you were fire blasting the axe head. Made me lol

    @KingofDefiance@KingofDefiance Жыл бұрын

    • thank you so glad you liked it :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Это великолепно мой друг, спасибо за твоё творчество! По другому это не назовешь. Из России с любовью!

    @kefirchik_fan8685@kefirchik_fan8685 Жыл бұрын

    • thank you so much for your kind words 😊

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • Он на барахолке нашёл старый топор изуродовал его, засрал каким-то хим средством, а потом обратно собрал. ))

      @user-pz3ph3xy3d@user-pz3ph3xy3d Жыл бұрын

    • ​@@user-pz3ph3xy3d ещё и заварил режущую кромку, закалка и отпуск идут нахер)

      @___15@___15 Жыл бұрын

  • Wow! never expect that result! I really enjoy the process and see you using all your tools and specially the ovens and of course the bear engraving that look awesome!!! really enjoy this video and the music was superb! thank you and keep that hard work!

    @m1k3f1@m1k3f1 Жыл бұрын

    • Thank you very much, i really appreciate your kind words 👍

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • I am amazed you could repair so much damage ! The finished product is superb!

    @LadyLeigh@LadyLeigh4 ай бұрын

  • Finally, a welder who blocks out the white hot welding spots so my precious eyes don’t get burned watching a KZhead video those screens can be surprisingly bright

    @Mr.Bojangles4@Mr.Bojangles4 Жыл бұрын

  • Amazing DIY !!love your custom engravings

    @Maximaker@Maximaker Жыл бұрын

    • Thanks - I'm glad that you liked it - cheers :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Шикардос!!!👍👍👍

    @igorprivalov9911@igorprivalov9911 Жыл бұрын

  • Absolutely beautiful work, a true craftsman. 👍

    @papajohndavid@papajohndavid Жыл бұрын

    • Thank you! Cheers!

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • @@AwesomeRestorations CHEERS!!!

      @papajohndavid@papajohndavid Жыл бұрын

  • I chose the bear as wll. The project was well done, amazing in fact!

    @bmcblane1@bmcblane1 Жыл бұрын

    • Thanks a lot 👍

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • I like the fact that you blur out the sparks for safety purposes, very thoughtful 👍🏾👌🏾

    @univeralbeing1330@univeralbeing133010 ай бұрын

    • The sparks and bright light is perfectly safe when watching on a video. 😊

      @Guitarplayer724@Guitarplayer7244 ай бұрын

  • Dude i love your videos. I have tried restoring some of my old tools because of you (obviously with a lot less methods at my disposal lol) but it is really fun. Time consuming but very fun. Keep it up bro. You're great.

    @japeezohumperdink9762@japeezohumperdink9762 Жыл бұрын

    • thanks a lot, I am very happy to hear that I have inspired you to restore some of your old tools :) have a nice evening

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • In another lifetime you were one of those mytholohical blacksmiths of the viking sagas! 👌👍

    @BOIOLA08@BOIOLA08 Жыл бұрын

    • I would love that titel :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • @@AwesomeRestorations pretend I'm a voice from the past: "The title is yours!" 👻

      @BOIOLA08@BOIOLA08 Жыл бұрын

  • You are truly an artist

    @salkabalani1482@salkabalani1482 Жыл бұрын

  • I chose the bear like you 😊. You are doing an excellent job. I can sincerely say that you are amazing. Your videos are relaxing.

    @onurakbag06@onurakbag064 ай бұрын

  • I'm curious: is the soldering/filling as strong as the forged material? or are those weak points?

    @filipecampos6450@filipecampos6450 Жыл бұрын

    • Good question. No the repair on the edges are absolutely weaker. But this one is a show axe going up on the wall. So it does not matter with this axe 🪓 thanks for watching 👍👍

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • ​@@AwesomeRestorationsif it was going to be used, how would you make it stronger?

      @tommyjimenez6120@tommyjimenez6120 Жыл бұрын

  • Отличная реставрация, и сварка и заточка боевого топора класс. Спасибо за видео, лайк однозначно.

    @user-dz8dg6ey8g@user-dz8dg6ey8g Жыл бұрын

    • Thanks a lot for watching 😉👍

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • Интересно а все кто пишут отличная реставрация знают что Сварочная проволока, и сталь топора это разные марки? И сварочная проволока это не закаляемая сталь. Она всегда будет мягкой и не будет держать заточку.. Так что топору только внешний вид целого предали. А пользоваться им будет невозможно.. При первом ударе кромка замнеться.

      @qw664@qw664 Жыл бұрын

  • I love all old axe especially in the province of mine its so many uses iluv the way u restore highly much appreciated

    @tngunplugged1390@tngunplugged1390 Жыл бұрын

  • Greetings from Maine, USA! I had picked the OWL! Thank you for sharing!

    @DanielParadis-sr5nh@DanielParadis-sr5nh6 күн бұрын

    • thanks for watching. Maybe I will make the owl anoter time 🦉🦉

      @AwesomeRestorations@AwesomeRestorationsКүн бұрын

  • Ficou um ótimo trabalho! Parabéns desde aqui do Brasil 🇧🇷.

    @luizabdo5397@luizabdo5397 Жыл бұрын

    • muito obrigado :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Você é realmente bom no que faz !!! Ficou irado !!!

    @lourencogadelha5240@lourencogadelha5240 Жыл бұрын

  • Nice work! You took an old rusty piece of metal and transformed it into a beautiful heirloom that future generations can admire and enjoy. Good luck and keep up the Good Work!

    @josephwarra5043@josephwarra5043Ай бұрын

  • Parabéns que Deus o abençoe pelo seu dom, assisto você sempre aqui do Brasil

    @viniciusmendes8255@viniciusmendes8255 Жыл бұрын

    • muito obrigado :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Красава! У тебя классные ролики! Золотые руки! Смотреть приятно, нервы успокаивает. Молодец!

    @staskarpov3396@staskarpov3396 Жыл бұрын

    • Thank you so much :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • It takes an extreme amount of patience to do this kind of work, and you're a straight up artist.

    @josephnaja@josephnaja3 ай бұрын

    • thank you so much ❤

      @AwesomeRestorations@AwesomeRestorations3 ай бұрын

  • Спасибо за прекрасное видео. Однозначно МЕДВЕДЬ!

    @user-gu6of7xb6m@user-gu6of7xb6m Жыл бұрын

  • New here, but i love the restore.. looks beautiful.

    @SuperReaper32@SuperReaper32 Жыл бұрын

    • Thanks and welcome

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Thought it would be a lynx. But the bear looks even better! Thank you for such an interesting and wonderful video. Thank you!

    @_Shien_@_Shien_ Жыл бұрын

    • thank you so much glad you liked it

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Yes I chose the Bear! I heated my home with hand split hardwood for 20 years and would have loved an axe with my totem engraved on it! Your channel is magnificent, many try to copy your style but they always fall short. Keep up the AWESOME work! 👍

    @101criticalthinker@101criticalthinker3 ай бұрын

    • thank you so much for your comment and support I really appreciate it ❤

      @AwesomeRestorations@AwesomeRestorations3 ай бұрын

  • Bummer! I guess I missed this one. Always a good job.

    @sandiearmagost2914@sandiearmagost29147 ай бұрын

    • better late thank never. Thanks so much I am glad you liked this as well 😊

      @AwesomeRestorations@AwesomeRestorations7 ай бұрын

  • Did anyone else think the damage was staged? The colors on the rust looked like spray paint. When he sandblasted that off, it looked like a brand new axe with some chips in the blade. I'm not denying that it's an entertaining video, or that he does quality work. I'm just saying the damage was done on purpose.

    @tedLassoWannabe@tedLassoWannabe Жыл бұрын

    • It looks like real oxidation to me. After it's removed, the pitting in the exposed metal looks corrosion-induced.

      @cameronpeterson1175@cameronpeterson11759 ай бұрын

  • Прекрасная работа. Вот только пользоваться таким топором нельзя. По сварочному шву всё равно лопнет.

    @user-kd4tf7iz6x@user-kd4tf7iz6x Жыл бұрын

    • this is for decoration only now

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • Согласен по шву, он не делал фаски и наложил поверхностно одним электродом. Хотя, заметь, в печи он снял напряжение в металле после сварки и масло разогрел для закаликвания. Но как произведение искусства тянет. И подкупает любовь мастера к своему делу.

      @user-jy9nc7bq4m@user-jy9nc7bq4m Жыл бұрын

  • Professional top workmanship, relaxing enjoyable to watch, and the editing and occasional special effects and sound effects are spot on. That goes for all your work.. thankyou

    @anthonybarra2391@anthonybarra2391 Жыл бұрын

    • thank you so much Anthony

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • I always rate your videos because you are one of the people who cares about putting protection on the screen when soldering

    @fernandossa@fernandossa Жыл бұрын

    • thank you so much

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • Interesting, I didn't like that he did that....🤷🏽‍♂️

      @richardbinkley8487@richardbinkley8487 Жыл бұрын

  • That deserves a beer Martin. Amother masterpiece of work. Craig 👍

    @TemplarsatAcre@TemplarsatAcre Жыл бұрын

    • thank you so much :) cheers 🍻

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • I am absolutely shocked. This is the second time I have seen you harden a blade in water.

    @mike-pl8sn@mike-pl8sn Жыл бұрын

  • Muito bom você é um ótimo profissional, abraço do Brasil ❤️🇧🇷

    @luck1ng955@luck1ng955 Жыл бұрын

    • muito obrigado :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • What a craftsman, job well done. Thanks for sharing.

    @robsteinhaur221@robsteinhaur221 Жыл бұрын

    • thank you so much Rob for watching 😊

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • I've picked the owl to the engraving but you did an awesome work in this axe

    8 ай бұрын

  • This Axe, It's the more Beautyfull thing i saw in my life :' D

    @alejandrooviedo6659@alejandrooviedo6659 Жыл бұрын

    • thank you so much Alejandro :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • @@AwesomeRestorations le nothing man :D

      @alejandrooviedo6659@alejandrooviedo6659 Жыл бұрын

    • @@AwesomeRestorations of nothing*

      @alejandrooviedo6659@alejandrooviedo6659 Жыл бұрын

  • Шикарная работа. Съёмка и монтаж тоже на высоте.

    @bratskienozi@bratskienozi Жыл бұрын

    • thank you very much :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • I appreciate you putting the dark spots over your welder so I can watch without burning my eyes out

    @Markmen-cw8dj@Markmen-cw8dj Жыл бұрын

  • отличное видео. из хлама, вы сделали интересную вещь! мне понравилось!

    @user-sr3jv2ju8d@user-sr3jv2ju8d Жыл бұрын

    • thank you so much I am glad you liked it

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Show de bola restauração ✌👏👏👏🇧🇷🇧🇷🇧🇷

    @edinhomineiro6768@edinhomineiro6768 Жыл бұрын

  • I enjoyed watching this a lot more than I thought I would!

    @tsmith2484@tsmith2484 Жыл бұрын

    • very happy to hear that 😊

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Excelente trabalho de restauração e de renovação! Parabéns ! < Brazil >

    @manecobeirao@manecobeirao Жыл бұрын

    • Thank you so much :)

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Trzonek po demontażu wyglądał tak, jak gdyby dopiero został wykonany i włożony w "uszkodzoną" głownię 😉 wygląda zbyt idealnie nawet pod rdzą 😊

    @hotdaddy81@hotdaddy81 Жыл бұрын

    • Maybe he put it in just for the sake of the video. But it seems that he has directly destroyed his edge.

      @krisztianbojtos8973@krisztianbojtos8973 Жыл бұрын

  • You're the first person on KZhead that I've seen shade the arc and I appreciate that

    @RustyDockLight@RustyDockLight Жыл бұрын

    • Thanks - Merry Christmas to you 💖🎄🧑‍🎄

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • That’s awesome, nice work 👍🏻👍🏻.

    @americanadventureoutdoors4213@americanadventureoutdoors4213 Жыл бұрын

    • Thanks 👍

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • The restoration job looks great, but I'd be interested in seeing how well those edges hold up. I would think any solder there would break away after some use.

    @Ryi725@Ryi725 Жыл бұрын

    • thank you so much, I am not going to use the axe for anything else that decoration now

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • @@AwesomeRestorations Actually there are tool steel filler roods for tig that could be use to repair edges and have them hardened and stress ready. Maybe for the next project? 😊

      @lancefullmoon@lancefullmoon Жыл бұрын

    • @@AwesomeRestorations maybe you should add this into the description, or pin another comment up top. otherwise you will continue to get guys like me saying "that edge weld is shit. Its not a hardenable metal", "that center weld, shouldve been ground out", "that center weld, shouldve done min 3 passes on it.", "its not hot enough for proper quench", "why the fuck you quenching in water? Thats not a W series steel", and so on

      @dracobruhma@dracobruhma Жыл бұрын

    • thanks.

      @nathonmazumder7973@nathonmazumder7973 Жыл бұрын

    • It's not solder. They were welded.

      @davearonow65@davearonow65 Жыл бұрын

  • Ты бережёшь наше зрение 💥👀👍👍👍☝️👍👍👍

    @user-ie4hj5wd4i@user-ie4hj5wd4i Жыл бұрын

  • I love the comments of "I'll try and restore....." and it always comes out awesome!

    @againstthegrain147@againstthegrain147 Жыл бұрын

    • ❤

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • good job. Always very creative, may God protect you

    @alaaalsaher8012@alaaalsaher8012 Жыл бұрын

  • спасибо за великолепное видео и за ваш труд

    @maksx11@maksx11 Жыл бұрын

    • Thank you so much 👍

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • It's more than a simple restoration. It's art.

    @z08z2a@z08z2a Жыл бұрын

    • Yes 👍

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

    • thanks.

      @nathonmazumder7973@nathonmazumder7973 Жыл бұрын

  • The Bear was a nice choice too. Great work!

    @gregb76@gregb76 Жыл бұрын

    • thanks a lot glad you think so 🐻

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Fantástico 👏🏼 excelente restauración, saludos

    @lilianamendozar.5880@lilianamendozar.5880 Жыл бұрын

    • muchas gracias Liliana 😊❤

      @AwesomeRestorations@AwesomeRestorations Жыл бұрын

  • Nice restoration work! By the way, would people know whether it was restored or just made as a brand new?

    @YWNKHIA@YWNKHIA8 ай бұрын

  • Best restoration channel on the Internet, hands down, thanks for sharing your work🌴🌴

    @josephnaja@josephnaja3 ай бұрын

    • thank you so much 😊

      @AwesomeRestorations@AwesomeRestorations3 ай бұрын

  • Отличная работа!

    @oberon9458@oberon9458 Жыл бұрын
KZhead