How to clean the air in your shop - Automatically

2023 ж. 1 Қар.
174 Рет қаралды

Today we discuss air filters, and in particular a great affordable unit that AUTOMATICALLY cleans the air based on the particulate matter floating in the air. We unbox and test the Abestorm DecDust 1,100CFM shop air filtration system in my 30x48' pole barn shop! I do a little bit of everything in this shop from woodworking to welding, painting, 3d printing, and more.
Why is this unit different? This unit is one of the few that I found that actually has an air quality monitor built in. This unit samples the air and will turn on automatically when the particulate matter in the air hits the threshold you set and shuts itself off when done.
This unit is not the end-all-be-all filtration solution. It is the best I could do on a budget for my hobby shop and what I use it for. I always wear a respirator with a P100 filters while welding, painting, or woodworking and a fan blowing across my work area for additional protection. There are obviously more expensive welding HEPA filters starting at $1,500 for the very smallest unit and going up from there into the tens of thousands of dollars.
Below are some links to tools and parts shown in the video. Most are affiliate links, if you end up buying I will earn a small commission. Thanks for your support!
Like my shirt? Check it out here: amzn.to/46W51A2
DecDust 3 speed remote controlled air filter: amzn.to/3QleREA
5 Micron replacement outer filters: amzn.to/40ugXXd
1 Micron replacement inner bag filter: amzn.to/49ma5iM
Respirator with P100 filters (I always wear this in addition to the shop air filter while welding, woodworking, or painting): amzn.to/40napJW
My ISO Tunes headphones (also act as ear plugs!) that I am always wearing in the shop: amzn.to/4672bHy
YT vid: My best tips and tricks for awesome (smart) shop lighting! • My best tips and trick...
This is how I did it, I would love to hear your feedback on what has worked for you in your shop. Hope you get some ideas!
Check out our site at www.DIYMetalFabrication.com and store at www.CreativeEnterprisesLLC.com

KZhead