Building and installing a Montero Sport engine
2023 ж. 24 Ақп.
6 148 Рет қаралды
I recently picked this 2000 sport up as a project, and decided to tear the whole motor down and give it a refresh. This time lapse was fun to make, from crank in, to engine running took about 12 hours
I bought a 2000 XLS. It was sitting for years the harmonic balancer bolt was loose, leaking oil. I did alot of work and was glad the engine was still good.
Best, fastest mechanic I know 👊🙏🏻
Montero sports suck!
Well done.
You're becoming another Mitsubishi guru! Keep it up dude!
with the help of all those who have gone before me i hope to be a good resource for everyone trying to get into the Montero game. we need all the insight we can get!
Great vid
i wish my 03 monty starts up like that after i am done 😮
HELL Yeah BRO!!!! The 2000 Montero Sport is a LIteral Gemstone for the start of the new Generation of the Montero Family.... ive got one too but having trouble finding performance parts for it... ive looked almost everywhere online and not much comes up. any tips on great websites to check out would be Exremly helpful straight up. This year of the Montero bro it doesnt get better than this trust me on that, its a Japanese Jeep but way better than a jeep on so many fronts its why i got one...
Great work man, I bet that startup felt great. I’m curious if the newer valve stem steals are updated at all compared to the originals or if you’ll likely have to go back in there after 100,000 miles again? Also, have you ever thought about a 6G75 non-MIVEC swap into your 2nd Gen Montero, apparently it’s plug and play.
The VSS should last the rest of the life of the vehicle. and i did think briefly about an engine swap, but i just rebuilt that engine last year so i'm not eager to rip it out again
im getting ready to do a complete engine rebuild on the 3.5l, its almost maxed out on its milage. im planning on upgrading alot of the internal engine componets to bring up the hrps and torque to around maybe a little over 450hrps and torque if i can even get 470+or- torque... i just am having some trouble finding all the aftermarket upgrades for this model.
thnx this gives me hope
I snapped my timing belt and more than likely have to replace my valves and valve seals, I was curious if you would be able to give any insight on the job, I have never taken a motor apart to that extent and simply cant find any information on the job for this motor. Love the videos and love the community around these cars
Check out my last 2 videos on my Gen 3 montero.. I went into that thinking I was going to do a VSS job and ended up doing more, but I go over a lot of the basics in there
@@montanamontero would you say pulling off the head is necessary or is it double without removing it for just a valve and valve seal job?
100% worth it to pull the heads and work on it outside of the car. But if you need to replace valves you will be doing that anyway
Hey bro, this is an awesome video. Question on the crank angle sensor, I forgot how the crank angle sensor is routed and I want to make sure the crank angle sensor wire doesn't get chewed up. Do you have any pictures of how it's routed? I have a PDF of the service manual but the diagrams aren't helpful at all. Thanks
i wish i had an answer for you, but i always run into the same issue so i'm not sure haha
No worries I found the bracket that is for the sensor and saw another teardown video that showed how it was routed. A legit "lightbulb" moment. Thank you for replying though!@@montanamontero
Owned Monteros (96, 02, 05) and a Montero sport (02). Any idea if a transfer case from a 3.5 4spd montero (gen 2 or gen 3 xls) would drop into an 3.5 awd montero sport? They use the same 4 speed transmission, and most of the running gear looks the same. Thought that combo with manual hubs would be nice to get 2wd avaliable in an awd sport.
this is a solid question, but unfortunately i really don't know
Is this the same engine as the old 3.0l v6?
Hello. @montanamontero. I would like to know the cost of a Montero Sport Engine. Also, what is a possible cost for installation?
what engine stand and lift are you using? Are you happy with them? Thanks.
it's a power torque stand. i think it's fine, i think most engine stands are about the same. I have an electronic winch set up in my shop for hoisting things, that's what i'm using for an engine crane
What do you charge for labor? I need an engine swap for a 2000 Monty Sport.. possible blown head gasket
I actually don’t do paid work anymore. I just work on my own stuff at the moment
🤙
How much would you charge for an engine rebuild in which the (in my case) 1995 Montero would have more street acceleration and more Off-Road Torque.
I’ve actually decided that I won’t do any paid work
I have a Mitsubishi Pajero Sport (Montero) year 2002, V6 3000 cc engine, gasoline and when I go to the mountains, in the high area of 2000m, it has no power. I was told that an altitude sensor is defective, but I don't know where it is. Can you please tell me where it is?
i've never heard of an altitude sensor, but their is a mass airflow sensor that works with the changes in altitude. that might be your issue
thanks@@montanamontero
3.0 or 3.5? sohc?
3.0L 24v. not my favorite motor, but it's the one i had
@@montanamontero yea getting that thing timed can be a bitch. My 93 has a 12v 3.0
@@DanielPerkins what makes this motor harder to time vs other motors? As far as I can see the cap and rotor is far to the corner so it wont get hot and you can just stop the car, and adjust it with minimal wait to let it cool. But I haven't been under the hood of this vehicle so I can't say. Some.jeeps, to save room, have the cap and rotor on the side of the block..probably gets really hot. Everything is a trade off.
Hi I liked your video but it was a bit fast for me to follow
yeah this wasn't intended to be much in the way of instruction. just a fun thing to throw together while i worked
No eres muy igienico
siéntate