5 Must Have Mods 5x10 Carry On, Lowes, Tractor Supply Utility Trailer- Best Single 2000lbs Axle
2018 ж. 14 Қыр.
492 033 Рет қаралды
Overview of some recent modifications I made to a Carry On Utility Trailer. Addresses changing a tire with a tongue jack, Toolbox choices and why, protected and improved wiring and lighting with LED lights. Trailer gate modification with an gate assist. Great spare tire mount and also upgrading the springs on a 2000 lbs trailer
For those asking about the Pro Plug, here is a link to the $35 unit I used in the video: www.proplugproducts.com/?wpam...
Mod #1 seen here: • Must Have Trailer Mod ...
Nice the pipe to jack up the tires. I like and respect that. Been assembling trailers for 16 years and making my own for 8 years and I absolutely respect this modification, it should be industry standard. Much respect Sir.
Thank you! This was my very 1st video and it gets a lot of views. I'm surprised too that I've not seen any manufacturers incorporate it. I'm working on a scratch build trailer now. A video will be posted!
I too think that is BRILLIANT !!👏
I have owned utility trailers most of life, and I never thought about modifying them to accommodate the tongue jack for easy tire change. I am blown away by that my friend, Great job!!
Thank you!
That tip alone was well worth watching the video. Such a simple mod that's very helpful. Paul you should see if you can sell it to a trailer manufacture.
That jack setup is a real good idea!
Love the jack in the back. Do one on each side and pull your wheels off the ground when in storage. Love it!!!
Your additional male mounts for the tongue jack, is very clever! As with most inventions, it seems obvious in retrospect, but I've never seen this before. I'm going to do this to both of my trailers! Great idea!!
I have to say the jack system is awesome,I've had a trailer for years I am definitely going to do this..I really love the other mods to... Thanks for the video..Nic..
Great mods Paul. Really like the tube for the jack to change the tire. If you put a jack on both sides you could load the trailer without being hooked to the truck
Hell of a job. Really nice mods. I’ll be adding some of these to my trailer. Just watch the dewalt tool box, they get brittle with age.
Nice work sir. I did similar mods. One additional one i did to mine was to replace the tongue with a 72 inch length tongue and then installed a 2 inch ball set up
love the pro plug ..very nice add
Clever and to the point. Especially like the rear jack mounts and the license plate extra anchor. Have lost one or two myself.
Stumbled across your video while researching e-track for my 6 X 12 dual axle. That Pro Plug is EXACTLY what I was trying to put together in my mind as an alternative to having the wiring harness exposed 24/7 for quite some time. I have flexible split loom on mine but you have to pay attention to it as it does degrade over time, especially here in south Florida with our super-duper sun. Don't have to create something that has already been created ...... just ordered one. Only negative ...... they are closed for the entire month of December! But, not a big deal, been this long without it another month isn't going to make any difference. Nice video, thanks.
Paul, thank you, for the great ideas. I like your modifications for jacking up the trailer to change the tires. Fantastic idea thinking outside of the box there!
Thanks. I'm really surprised this was never a common practice by manufacturers. Seems like a lot of people see value in my idea. I really appreciate the feedback and positive comments!
@@PaulsProTips Paul look into selling that mod to a trailer manufacture. It's awesome!
Really good useful mods,, really like the tounge jack mounts for changing tires
Awesome mods! No favorites, I like them all. Great video.
That was a DOPE video! I have a trailer just like that! (Mine might be a bit longer) But same idea... I’m definitely going to ad all them mods to my trailer first chance I get! Those are all really good ideas man! Great video to buddy! Keep at it! I will definitely be watching the videos on the leaf spring replacement! Thanks again “BIG D”
Very well done Paul! Not just pro tips but pro design and fab.
Great tip on mounting the jack tubes on the rear! I put backup lights on our utility trailer and boat trailer, helps ALOT! Not only at night, also when backing up in parking lots, this way other folks know exactly what your doing.
Nice job Paul, some really good tips. Thanks for sharing
Great idea's on everything, thanks Paul !
Great idea on the jack to change your tires. I'm definitely doing that to my trailer 👍🏻👍🏻
Thanks. Glad to hear you like it. Good luck with yours!
Great video I have to purchase a small trailier to haul my second 4 wheeler around and I'm definitely gonna use some of your ideas
Love the Tongue jack. Nice. For replace tire make it so easy. Wow.
Great video and mods. When my original cheap trailer tires needed replaced, I took it to a tire store and got actual steel radial trailer tires. Huge difference!
Why even buy trailer tires...they're junk. The salesman told you to?
Nice mods, I really like the jack mounts on the back.
Great tips, definitely doing the Jacks and plate mods! Thanks!
Thanks for the feedback. I've got to get some of these other video's uploaded.
Love the video,nice mods I will be making some mods to my trailer. Thank you for sharing your video. May God bless
I really like some of your modifications. Especially the ramp assist and beefing the ramp up. They are all to flimsy when you buy the trailer. Love the wiring setup on the front of the trailer. I need to watch again and see what you did there. The rear Jack is also a great idea. I’ve thought of that because when I lower the ramp on mine and get up in the trailer it lifts the front off the ground. Thanks for the video. Nice ideas.
Thanks. I did a video just on the wiring. There is actually a long and short version. Working on a fresh build right now. Hope to have more videos soon.
There's some great tips. I've always had tongue jacks, but a great idea to use to jack the trailer
Awesome ideas! Thanks for the video. Keep them coming.
I am building a trailer. I love the rear jack points.
Not gonna lie I’m stealing more than one of these ideas. My trailer is close to 70 years old and the frame rails rotted out (old boat trailer) I think the only thing original on it now is the tongue. Love that pro plug and everything else about this build. Great job.
Nice. Good tips for a first timer. I have all these...after years of encountering a reason to do. :) much appreciate the vid
Great video! I imagine the rear jacking points come in very handy if you already have a load on the trailer. Also If you're parked.
Thanks Paul! Good stuff buddy! Gonna get a Pro Plug for sure!
There is a lot of thought gone into this. I love the jack, the detachable cable & the tail assist...gonna do all three on my trailer in the spring when I revamp it.
Thanks. Most of this comes from using it a lot and thinking of ways to improve the use. Love to hear how you make out in the spring, and if you find anything else worth doing. Feel free to come back and share in the comments! Thanks for checking this out and good luck!
Nice modifications. Makes the trailer that much more useable. Also, the late model rear bumper swap on the pick up looks sharp.
Thanks for watching! The mods have been very rewarding and I appreciate the encouraging comments. The old truck has an 8.1 in it with over 350k. The bumper update was necessary due to a rusty bumper (under the plastic covers). You have a sharp eye sir!
Great tips. Hint: cross those chains in an X when hooking them up
Thanks. I think I may have to call that out next time. If you watch closely in the video, but because I have the pre-crossed when hanging it doesn't demonstrate well on video.
Looks like the chains are attached to a single loop. No need to cross them in this setup.
@@Chugwater_Cowboy such a long statement for someone who has no input to add it appears you are just picking on @RayzorZ28 . The original comment does not explain why he should cross the chains.
@@Chugwater_Cowboy why would you cross the chains? I'm seriously curious. I just bought me a 5×8 and don't know much about utility trailers. I'm about to deck it and mod it.
@@rjskum688 Rj, you cross the chains to create a "basket" for the trailer tong to fall onto preventing it from hitting the pavement should it hop off the trailer ball.
Great job... Both on the trailer & the video..! 🎉
Love the tailgate assist. I purchased a used trailer and swapped out the boards due to half being broken with 2x6 ones. Nice and thick. You did not mention trailer hooks. I’m not sure I saw any on yours? I added a total of 4, may add two more in very front. Purchased the large ones from Harbor Freight at $4 a piece and 3/8 screws/locks/ bolts from Home Depot. Those hooks were a must have for me. Very easy and fast to drill through the metal frame. Thanks for the video. I will be looking for the tailgate assist now.
Thank you! We are going to build a square drop camper/gear trailer and are going to start with a new 5x8 trailer. Definitely going to reinforce the tongue and I'm going to check out that pro plug system! Being in maine, it would be nice to have that on our trailers to keep everything clean!
Nice mods. Another mod I'd recommend if the trailer doesn't already have them, are greasable wheel hubs.Hubs with external grease fittings will save you tons of time and effort greasing wheel hubs. And believe me, don't overlook the hub bearings.If the bearings are dry, they will eventually fail.
The jacking points at the rear can also be used with 2 more Jacks to stabilize the trailer when loading and unloading.
That is a great comment! The previous owner of this trailer must have done that because the wheel bearings have held up great! I have another one of these trailers I bought new in 2004 and wheel bearing failures were one of my 1st headaches. Thanks!
Sick trailer man! 👌
Paul between me and the misses we've got 11 trailers and I'm shopping for number twelve today . I thought I knew trailers. After watching you though, I tip my hat to you sir. I Really enjoyed your share , and thank you for it!
I really appreciate the compliment. You've got me covered by a factor of 3, so hope you are enjoying them all!
Awesome upgrades.I like to get the longer chain links and weld them along the bottom of the trailer where the vertical angle bar and edge of trailer connect.They make great tie down points and add strength.
Great tip! Thanks for the comment!
I do the light boxes on every trailer. About $45 on amazon for the pair with lights.
Nice mods! Think I’ll invest in the lift gate assist. Didn’t think I’d worry much about it before, but it’s getting heavier with age,..my age that is! Lol. Thanks for the ideas.
Too true.
Every mod is spot on. I guess you could go on and on with the mods, but these all are terrific without spending a whole lot of money. One more important mod might be removable stake sides. Another simple thing to go with your jacks would be level indicators
Thanks. Leveling a trailer for towing is often overlooked. Great suggestion!
These are great mods and smart ones too, thank you, great video. I plan on buying my trailer soon so this really helped.
Thank you! I need to upload my scratch built trailer. Look out for it soon!
@@PaulsProTips I'm going to be on the look out for it. I know that is going to be a great video too. Thank you.
Congratulations, you made it into my recommended videos. Nice video, it had that kind of flow that makes the subject interesting. I especially liked the one shot style.
Those are some nice mods Paul, looks like you’re an excellent welder too buddy.👍🏼☮️
Thank you! I'm continuing to refine my technique. Started a scratch build that needs to be uploaded. Stay tuned!
Great tips and thanks for sharing them
Wow! Never heard of a Pro Plug! Thanks!!
Yeah, I've got a few other videos with specific techniques. This ProPlug system really is a game changer! I would love some honest feedback on the trailer wiring videos on what is good or what you do differently. Thank you!
Nice mods, thanks for the ideas
Thanks for the ideas. Nice setup.
Nice work. Hope to see more like this
Well done. Thanks for sharing.
that jack setup is smart. One thing I did on a work trailer was weld a axle spindle where my spare was than I carried a spare hub bearings and spare.
best idea ever.
Great idea!
Right! Great idea. I had a flat and dang, what a pain.
First off I personally wouldn't buy a box store trailer but, you have added some really smart ideas to it that's definitely a winner. Building mine from scratch as at the scrap yard the steel angle and tube was still way cheaper and stronger.. The axle with leaf springs, fenders and good tires/ rims were free, got lucky. Your add on's are fantastic as your perspective gave me great things to add in that left me with forward direction rather than saying later, "Damn That's such a good idea I need to go add that", it will be on it right out the gate Thank You.
Thank you for the kind words. Check out my other video. Most recent one is a give-a-way of a proplug box. I'm giving two away and currently there is just 1 guy who has commented for the win! I plan on building another trailer from scratch, like you are. I'll post up when I do! Always appreciate the feedback and welcome any future ideas/ requests for a video.
As a young widow with kids flat tires are one of my biggest pain in the butt issues/worries. Next thing I'm learning to do is weld and Im going to weld that jack stand attachment thingy on! Thanks for sharing it. GENIUS!!!
I'll weld them for you.
paul , i love that jack idea ! im doing it this weekend lol
Thanks!
Love it! Great job!
Awesome mods. Thank you
Great tips thank you so much for posting
I really like the jack used for changing a tire. Great idea and really worth while.
Thanks so much for the positive feedback. What type of trailer are you working with? What do you mostly use it for?
@@PaulsProTips Hi Paul. I have a 5x10 steel utility with sides. Has a 3000 lb. axel with brakes. Very heavy duty but real heavy to pull. More then I need really. I used to haul soil and sand with it, but those days are behind me now.
@@Mascotal you bring up a good point. I am currently building a more heavy duty 5x10 with a axle and brakes like you have. I do have concerns it will be heavier and harder to manage when unhooked. I think I will be posting a mid build video to bring people up to speed. If you see it, I would really appreciate your input!
@@PaulsProTips I had my trailer custom made for me. I can haul up to four yards of heavy manure, or two yard of sand, or a full yard of gravel. My tow vehicle is a 2006 F250 with 5.4 v8. I do OK on the flat level but the truck has to work on any hills. I suspect the trailer is about 1000 lbs. but I have never weighed it.
There are aftermarket valve stems available that you can have your local tire sales department add to your rims. Some newer vehicles ( I drive a 2019 Chevy Silverado) have the option to read these “Bluetooth” valve stems air pressure and ALSO temperatures which will show a possible axle bearing ready to overheat.
Nice mods.... gave me some great ideas!
Good job my friend, you have very good ideas!
Nice video, liked, subscribed, and commented. You're almost to 400 subs now!
Thanks man. I've got to edit a few more vids and put them up soon and keep the momentum going- hoping to hit 1000 by the end of this year!
Neat jack idea
Nice trailer! 👍🏽
I have the Lowe's 6x10-ft Utility Trailer with Wire Mesh all the way around and the Ramp Gate. I noticed that your mesh is welded from the top when down which I wish I had. I was carrying something up the ramp when the mesh gave way under me. If it were on top like yours, it probably would not have broken. Now I have to wield angle iron around the outside over the mesh because I don’t trust wielding the mesh. Also I found that I don’t really have much to tie off to and have broken the mesh on the sides as well so I want to wield tabs around the sides to attach hooks to. My trailer already had the jack in front, but I bent it after forgetting to jack it all the way up. I thought about buying a fold up jack to replace it, but was worried about drilling into the A-frame because it had all the wiring run through it. I also lost my license plate because it had a plastic mount. I sometimes load it without being connected to the truck and the rear goes down to hit the ground and I’m thinking of welding a jack or something on the back to prevent that from happening. I’m tired of looking for large rocks and such to put under it because my jack stands are too tall. I don’t have a spare tire and I really like how you have yours set up so that you can easily lift the trailer.
Awesome! I was thinking like...d rings... but you surprised me.
Great tips! Good work!
All great tips. Thank you!
Thanks for the positive comments! This has been a great trailer for me. Hope you get the most out of maxing out your's!
Awesome im going to follow all of your ideas thanks
Great video, thanks ! I really want to learn to weld. Should have done it 20 years ago.
The Jack mount at the rear was a great idea.
Thank you. I appreciate the positive comment.
Thank you - great video and very helpful.
I appreciate you taking the time to leave a nice, positive comment. I made a few other videos, but this one really took off. I will continue making videos. If you have any specific needs, feel free to reply. I am always looking to hear ideas for future videos!
Great Video! Thanks for sharing. I just bought a 6'x10' foot trailer and looking for ideas to upgrade it.
Looks like you found it!
@@PaulsProTips Yes sir! I just found your channel and I'm binge-watching. ;-)
Good video. I have a 6.5 x 10 that I welded D rings on to strap down my UTV. I need to add the rear jacks to mine and spare tire holder.
Very cool. I started to scratch build a new trailer, thinking Covid was gonna afford me more time at home. Well work was classified as essential and things never slowed down. I have not done any special tie downs, yet. I likely will add so m w D-rings. Were there any other tie downs you liked?
@@PaulsProTips I used my mig welder and welded 1/2 inch d rings from harbor freight to the trailer. I plan to weld two more in the middle. My dad is a retired union welder and he said they were plenty strong enough for hauling. No greater complement than from your dad. I plan to also weld a vise on for miscellaneous tasks.
@@jalton9416 A vice would be nice!
The jack stands are a great idea.
I appreciate the comment. I'm actually surprised this has never been done. All these trailers with a "set-back-jack" to clear the tailgate would be much better with this design- though ai may be a little biased!😉
Very Nice!! 😎
Live the jack idea
I just bought one , thnx for the post.
Thanks Paul
Here is a very small lil thing I did to mine , got tired of loosing the pin that goes thru coupler to keep it closed on ball, added a piece of aircraft cable to area where I could by couple then hooked aircraft cable to pin . Measuring to ensure it was long enough to reach coupler.
Great ideas great video. Thanks
Great tips. Really like all. Thanks.
I do appreciate the positive feedback!
Suggestion: Mount plate under gate with an LED plate light.
That is a good idea. The old gate had this, but I was concerned a cop might think I was ridin' dirty if he could not see the tag with the gate folded forward. For trailers where the gate can't do this, your suggestion is a good one.
Good information. Thank you for sharing.
Sure thing. I am overdue for some content to go up. Always happy to hear the positive stuff, but open to suggestions and requests for something new. Thanks for taking the time to comment!
You did a great job on the trailer. The only suggestion I have is to add reflective tape on the ramp and around the trailer for added safety.
Great suggestion! If I could post a pic here, I would. Trailer will be updated tomorrow.
The reflective tape really makes my utility trailer pop really nice day or night. I bought the red and white combination from Amazon.
Nicely done!
Thanks I appreciate the comment- and the positivity even more!
The Pro Plug system should be used on trailers in the hire industry.
Nice job good information. Thanks. I subscribed..
Nice job. I’m getting ready to add about 30” height to mine.
30" is a big step up. Post a link if you are doing a video! Good luck
Nice setup bud , nice setup 👍
Thank you. I really liked some of your tips on your channel too!
I like the tire jack and the pro plug.
Thanks! I was wiring another trailer and upgrading to the Pro Plug today. Shot plenty of video so if I can get it edited, there will be another nice video featuring how my personal best practices on trailer wiring. If you subscribe and ting the bell, you'll get the notification when I upload it tomorrow. Thanks for watching this video, and I appreciate you taking time to comment!
Great video man and great idea! I’m gonna do this to my trailer and spare tire on a spindle! Extra bearing too!!! Another guy commented with the spindle idea. Didn’t want to take credit for someone else’s idea! Super Kool!
Thank you man. Got a bit stalled with the cold weather, but more videos coming soon. I agree the spare spindle was a great suggestion! Plenty of sharp guys commenting on this one.