KZhead
Ғылым және технология

Building A 120,000 Volt Ray Gun! (Portable lightning)

Plasma Channel
2024 ж. 13 Мам.
494 076 Рет қаралды
Жүктеу

Static is a beautiful thing, and so is Displate. Get an even better deal using my link www.displate.com/plasmachannel or code PLASMA. 1-2 = 22% OFF 3 = 33% OFF. Available for a limited time, excluding Limited Editions and Lumino. Discount applied automatically when using my link.
Making lightning is fun, and I built a Static electric gun to do just that. It can shoot static across the room, and also deliver a really serious charge.
Try out OnShape for free, at Onshape.pro/PlasmaChannel
Support / Follow Plasma Channel on:
Patreon: / plasmachannel
Facebook: / plasmachanne. .
Instagram: jay.bowles.plasma
Check out the new merch here: crowdmade.com/collections/pla...
=======================
**Music credits**
======================
Title screen music:
Song: Sappheiros - Awake
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • Sappheiros - Awake (Vl...
ALL other music provided by Epidemic Sounds
#future #innovation #Halo
I am also a television actor! Follow me on IMDB
My IMDB: www.imdb.com/name/nm6578948/

Пікірлер

  • Thanks to Displate for sponsoring thus video! Go check them out at www.displate.com/plasmachannel for some sick Displates! If you're wondering about me improving this ray gun - version 2 is already underway!

    @PlasmaChannel@PlasmaChannel2 ай бұрын

    • How about a kit for these? Some of us (me) are mechanically challenged. I would love to have one though.

      @c567591@c5675912 ай бұрын

    • Can it be stronger, shooting lightning over 3 feet ? Or is that just physically impossible while being a hand held device

      @mohammadhoseinebrahimi@mohammadhoseinebrahimi2 ай бұрын

    • Will you be converting this into an electrolaser? Basically, dual high-intensity lasers create a pair of ionised chammels for the high intensity electric arc to travel down, like a wireless taser.

      @UnitZER0@UnitZER02 ай бұрын

    • I've been working on a project that might be helpful when it comes to things like this. I'm ordering new parts because I melted my proof of concept through a bad ground connection 😅 but once I get my new gear I should be able to set it up for more appropriate testing. Once I get it stable I would enjoy your feedback.

      @RyanLebeck-td5ft@RyanLebeck-td5ft2 ай бұрын

    • What about using particulates in a stream for the charge to jump between, to extend the arc? Like salt, for instance, but set up so instead of an air-puff, each particle would be propelled via small rotating cylinders, and fed continuously? There's already little salt guns for indoor bug hunting - granted those do rely on pressurized gas. Maybe a test to see how viable it is could be done with a very fine tipped funnel and firing the arc into the top of the arc, and seeing if the charge flows at all.

      @Tiniuc@Tiniuc2 ай бұрын

  • Me randomly charging people on the street

    @integza@integza2 ай бұрын

    • I actually planned on this lol. But, knew youtube would demonetize the video for promoting "dangerous behavior". It's called science, youtube, it's called science

      @PlasmaChannel@PlasmaChannel2 ай бұрын

    • kinda like that shazam scene

      @he2a@he2a2 ай бұрын

    • You could try it with willing test subjects and see if you can charge a person from a distance away and if they get shocked if they shake someone's hand.

      @thorwaldjohanson2526@thorwaldjohanson25262 ай бұрын

    • What would happen if you charge 1000 people passing by? Especially if you're doing it around a thunderstorm. What sort of local charge would you create?

      @philipmccrackeniii4575@philipmccrackeniii45752 ай бұрын

    • Don't say that kind of stuff around me. I might try it...

      @Nexalian_Gamer@Nexalian_Gamer2 ай бұрын

  • My man played helldivers, saw the Arc Thrower, and was like "Hold my negatively charged beverage."

    @DavidDrury90@DavidDrury902 ай бұрын

    • You realize Star Wars Battlefront had one in 2004, right?

      @houseofosborne1173@houseofosborne11732 ай бұрын

    • This had me chuckling 😂😂

      @Flubberbutter@Flubberbutter2 ай бұрын

    • Just cause 3: Eden "Spark".

      @thespacementv1506@thespacementv15062 ай бұрын

    • @@houseofosborne1173 imo Helldiver kinda suits this video better because "Electron Liberation" over wide shot of mountain and epic music is just about the level of campiness that Helldiver operates in

      @rigen97@rigen972 ай бұрын

    • never mind Mass Effect 2

      @kingmasterlord@kingmasterlord2 ай бұрын

  • My cousin uses your videos to show her 6th graders during science class. I grew up with Bill Nye and now kids get to grow up with you, Back yard scientist so many others. Thanks for the amazing, well made content. Lastly YAY love seeing more people from the PNW.

    @potatoesindrag4095@potatoesindrag40952 ай бұрын

    • Bill Nye is the GOAT!

      @anjmmasp8304@anjmmasp8304Ай бұрын

    • Yea

      @KriticalUranium235@KriticalUranium235Ай бұрын

    • That's awesome! So your cousin isn't qualified to be a teacher and explain things to kids? No wonder we're doing such a great job in the USA of America and Canada😂

      @dalebob9364@dalebob936422 күн бұрын

  • Gets a grant for 3 billion dollars. Makes one 10x bigger in the shape of a rifle. Hooks it up to a 150 car battery array. Starts shooting Starlink satellites out of orbit.

    @MRTOMBO@MRTOMBO2 ай бұрын

  • Every video gets cooler I swear

    @KkachiKashaKarma@KkachiKashaKarma2 ай бұрын

    • 👽 Did you say you like shooting? I grew up on 10 acres so naturally I love shooting. And I've been dying to share this with someone who would actually understand it. A bullet has either a left hand or right hand spin. on the way up to its apex the air all around the bullet is essentially the same. But after the Apex gravity starts to take over and pull the bullet down. Now the air underneath the bullet is thicker than the air everywhere else. So depending on which twist the bullet has it will now roll that way. It doesn't start until after the Apex and the farther the bullet drops the more it happens because the bullets dropping faster gathering more are underneath of it and it will actually role in the direction it's spinning like it's rolling across the table from left to right. Not only do I love shooting I've read every book on it I could ever find and I've never seen anyone mention it.

      @johnfarris6152@johnfarris61522 ай бұрын

    • @@johnfarris6152 what?

      @BenCos2018@BenCos20182 ай бұрын

    • Bro just stopped AI taking over the world

      @Ultimate5671.@Ultimate5671.2 ай бұрын

    • Thanks, that means a lot!!

      @PlasmaChannel@PlasmaChannel2 ай бұрын

    • @@PlasmaChannel how many farrads do the capacitors have?

      @amadeusyssowski1651@amadeusyssowski16512 ай бұрын

  • Hehe, Now my friends will never be able to harmlessly touch a door knob.

    @Theowl_dweller@Theowl_dweller2 ай бұрын

    • Now you're going to ruin your life over a doorknob, you might as well lick it too.

      @KhattaRapidus@KhattaRapidus2 ай бұрын

    • devious

      @Chandelure_F-5@Chandelure_F-52 ай бұрын

    • 😂

      @pzxgamer737@pzxgamer7372 ай бұрын

    • Yes I thought the same thing

      @pzxgamer737@pzxgamer7372 ай бұрын

    • That happened to a kid in our 4th grade class. He used the van de graff generator to make his hair stand up, and before he could get discharged by the wand thing, he went to go to the bathroom. He fell on the floor

      @Damianmarleyfan@DamianmarleyfanАй бұрын

  • Great device! Now add a powerful ultraviolet laser to ionize the air, creating a plasma and send a charge down range to the target! I read about this years ago but have not been able to find it again since. The suitcase size design had a range of a couple miles!

    @Greenmanplants@Greenmanplants2 ай бұрын

    • What someone actually made that? Sounds like that powerful of a laser would do a lot of damage itself.

      @mrkiky@mrkiky2 ай бұрын

    • Yes just the gf un fills the roo. With a broken coppier smell. Fyi. Ozone o3 is a irrelevant and also disolves l as laytex. So never a good idea in the bedroom lol

      @mikecaprice5440@mikecaprice54402 ай бұрын

    • ​@@mikecaprice5440 just pinging you with a reply so hopefully you can fix the spelling mistakes. Honestly can't really tell what your trying to say, seems somewhat interesting though.

      @JediSentinal@JediSentinalАй бұрын

    • @@mikecaprice5440 were you drunk when you typed this?

      @alaranarmstrong3718@alaranarmstrong3718Ай бұрын

  • Plasma Channel I have four suggestions. First of all it looks great and with that clear epoxy you have an opportunity to use some led lighting for a cool effect in that epoxy to show power is going through. Second, you want it to travel farther and straighter and you could use an infra red diode laser to ionize the air ahead of the discharge to get it to follow the beam, or even use a visible light beam, and reflect it off of a metal mirror, a flat spot polished on the bottom of the little sphere holding the pointy part. Third, an electron beam might ad some distance, thought it is rather complex to build a small one. Could you use a magnetic field to focus the discharge or would it just curve it around? Lastly a ducted fan blowing the air forward might extend the range and use stator blades to keep it from vortexing but travel straight. I hope these suggestions ring a bell in your head and you try some. Good luck on an already great job.

    @TheWadetube@TheWadetube2 ай бұрын

    • he could just drop some neon bulbs in the epoxy and they will glow off the HF

      @AdricM@AdricM23 күн бұрын

    • @@AdricM a neon tube up the side of the barrel would look cool as hell, youre right

      @lilymclaughlin3010@lilymclaughlin301020 күн бұрын

  • Great build! You know the answer to the question "Should I build a bigger version" is always going to be YES, right? :-D Definitely need a bigger version in a rifle type form-factor.

    @funkyspacecow@funkyspacecow2 ай бұрын

    • The answer is, as big as it is still practical.

      @dingdingdingdiiiiing@dingdingdingdiiiiing2 ай бұрын

    • gatlin... one can always hope for a multi barreled lightning gun ^^

      @davidliefrink9818@davidliefrink98182 ай бұрын

    • Make it as big as a room and use it as a mortar.

      @anshumansingh6645@anshumansingh66452 ай бұрын

    • Been done 1987. Want to build the best multiplier. Try building inside coe33. Glass tubing filled with tranformer oil. I got into lampwork years later . Incase I wanted to make one with the hv circuit built in pyrex glass. The gun does backfire on you once your get the power limitation addressed. Want a sic looking gun. Steampunk cyberpunk. Coe33 glass. And carbon fiber resin. All hv is oiled filled for self healing . And cooling.

      @mikecaprice5440@mikecaprice54402 ай бұрын

  • Seriously, this channel should have more subscribers with the insane content and production you do. Amazing work as always!

    @RaptorGTA@RaptorGTA2 ай бұрын

    • Thanks Raptor! I’m honored you enjoy my work this much. Really, thank you! Feel free to share this video so that others can enjoy it.

      @PlasmaChannel@PlasmaChannel2 ай бұрын

  • That thing is a beauty, espesially the multiplier and the way the diodes and capacitors are arranged.

    @apathtrampledbydeer8446@apathtrampledbydeer84462 ай бұрын

  • Your desigining and finishing is fabulous.🙌🙌🙌

    @callofdutygamer820@callofdutygamer8202 ай бұрын

  • I understand that a laser can be used to ionize the air and allow a spark to travel much further, it is known as Laser-Induced Plasma Channel (LIPC). It could work in a larger version

    @felipeesquiveldelpino6923@felipeesquiveldelpino69232 ай бұрын

    • Not that much though. But it would be cool to see it irl.

      @FilSerge@FilSerge2 ай бұрын

    • By the way, It could be (and should be) easyly tested on that device with impulse laser placed opposite to gun to measure laser power needed and distance achived by this.

      @FilSerge@FilSerge2 ай бұрын

    • ​@@FilSergeHave you seen the research on Laser induced plasma channels with an Axicon lens? This is what you want for creating a robust focal line (a Bessel Beam) from the electrode to a target. You can even bend the Bessel Beam into an "Airy Beam" to create curved arcs of electricity.

      @taylorwestmore4664@taylorwestmore46642 ай бұрын

    • @@taylorwestmore4664 I have not. Thx for pointing, will take a close look on it.

      @FilSerge@FilSerge2 ай бұрын

    • Laser Induced Plasma Channel just sounds like Plasma Channel's arch nemesis. -)

      @THEcucufate@THEcucufate2 ай бұрын

  • this is one awesome build Jay! I have an idea for improving your design even more. If you combine the Ray gun with a UV-Laser, you can ionise the air in a direct path in front of the gun which will work as a conductor for the electric charge. I think it would be neat to see how far you can shoot a lightning!

    @Craftlngo@Craftlngo2 ай бұрын

    • I wish he sees this comment, here's a like for you. *Presses like*

      @Sr-xd9ic@Sr-xd9ic2 ай бұрын

    • This would be soo cool

      @finneganwalker2960@finneganwalker29602 ай бұрын

    • Boy are you wrong in a big way! First you can't get anything out of a transformer when said transformer is supplied with DC

      @anthonybaransky137@anthonybaransky137Ай бұрын

    • So get building!!! Looking forward to seeing your creation in action

      @alfonsedente9679@alfonsedente9679Ай бұрын

    • Check out Allen pan he just made a video on this

      @hunterjoy1871@hunterjoy187121 күн бұрын

  • Dude, you’ve provided me the exact information I’ve been searching for!! This is something I’ve been struggling with. My new roll model going forward! Seriously

    @stephenjohncarringtonsmith@stephenjohncarringtonsmithАй бұрын

  • This is in top 3 most interesting projects you have made so far. Thank you !

    @juperrr@juperrr2 ай бұрын

    • What are the other two? Thanks. -new subscriber

      @MysterEarl@MysterEarlАй бұрын

  • 10:50 The fact that the electrons comes out of the electrode in a pretty much perfect straight line in the first centimeter or so and only after that they start to go in the typical spark way is interesting.

    @the__Ultraviolet@the__Ultraviolet2 ай бұрын

    • With enough energy density he could make something like this that would function like a stun gun over 20 meters or more You can get more expensive and much smaller caps etc to make something about this size that would be capable of doing so that only uses 9 to 12 volts dc. The problem is energy density of the battery. The best lipo right now is about 3500 ma per cell something around about 140 watts little less as that is for a single 18650 cell which is 3.7 volts To make it actually useful as a sort of non lethal weapon you would need many times that at 9 to 12 volts. Connected to an external power source from a wall you could do it pretty easy i would think

      @nanaki-seto@nanaki-seto2 ай бұрын

    • ​@@nanaki-setoWouldn't that be an electron gun?

      @the11382@the113822 ай бұрын

    • @@nanaki-seto Hell yeah Urban Chaos long distance stungun

      @ElliFong@ElliFong2 ай бұрын

    • @@nanaki-seto Could probably soup up a neon sign ballast, they're very powerful to begin with.

      @Bob_Adkins@Bob_Adkins2 ай бұрын

    • @@nanaki-seto You still wouldn't be able to direct it at something 20 meters away, unless in controlled conditions. It would just arc to something closer.

      @mrkiky@mrkiky2 ай бұрын

  • Just from the intro, the gun looks really stylish and epic

    @Franklin_Johanessan@Franklin_Johanessan2 ай бұрын

  • that was absolutely astounding, I wanna build one

    @brunoggdev6305@brunoggdev63052 ай бұрын

  • Bud I really appreciate your skills!!! Keep up the good work man.

    @biga8u@biga8u2 ай бұрын

  • "I see tons of potential" I see what you did there ;)

    @UNgineering@UNgineering2 ай бұрын

    • Heh, HV physics joke.

      @thespacementv1506@thespacementv15062 ай бұрын

    • Pun intended 😂

      @SwiftShadow887@SwiftShadow8872 ай бұрын

  • Yes you should definitely build a larger version of it🔥🔥🔥

    @cisarvialpando7412@cisarvialpando74122 ай бұрын

  • I loved this! I clearly need to learn more about electronics and circuit building. Thanks for the video!

    @ShadowBMe@ShadowBMeАй бұрын

  • Your videos have really inspired me to try my hand at this. I've ordered the caps and diodes to make my own static gun. Please keep videos like this coming. Thanks!

    @machine2747@machine2747Ай бұрын

    • hey could u help me, im not able to find the caps and diodes for some reason

      @prajplayz3607@prajplayz360725 күн бұрын

    • @@prajplayz3607 I found everything on Amazon. I also found the same parts on ebay. Good luck!

      @machine2747@machine274716 күн бұрын

  • Thank you for this video, I am working on a project involving charging something in a similar way to this and it gave me a ton of inspiration!

    @AdrianGarcia-dm4ep@AdrianGarcia-dm4ep2 ай бұрын

  • Another brilliant piece of fun devices presenting SO well.

    @robbierobinson8819@robbierobinson88192 ай бұрын

  • Thank you brother 🙏

    @sonnystreatwise1231@sonnystreatwise1231Ай бұрын

  • This is so very cool and true to your fashion to deliver a presentation that is top notch and all inspiring!

    @gatorhockey2@gatorhockey2Ай бұрын

  • One of the coolest builds yet. Nice work and stay classy.

    @Slowly_Going_Mad@Slowly_Going_Mad2 ай бұрын

  • Go bigger!!!! Gotta compete with Electroboom! Or, as a way to make it a challenge, Try to get the highest voltage, in the most compact way possible, without it being two feet long. Not sure if if would require a special type of resin. But it would be fun to see just how high of a voltage you can get, in something that can be held with one hand.

    @Fearmylogic@Fearmylogic2 ай бұрын

  • You blessed with wisdom and knowledge, man, wow!

    @livelystone@livelystone2 ай бұрын

  • Bro litterally made himself magnetic 💀💀

    @OreoGamezYT@OreoGamezYT2 ай бұрын

    • The pick up lines make themselves

      @cheesehead_man1375@cheesehead_man137521 күн бұрын

  • Awesome build, it's straight out of a scifi novel. You should try the organic supports in prusa slicer. They're easier to remove and use less material.

    @asuschaos@asuschaos2 ай бұрын

  • The U.S. military has looked into laser directed plasma discharge as a way of zapping the electrical components of a missle. You shoot a laser beam long enough for it to ionize a direct chanel at a target. Its civilian application is a virtual lightning rod of "infinite" length.

    @Grimmance@Grimmance2 ай бұрын

    • *it's called a "PARTICLE-BEAM-WEAPON". Old news from the 1960's*

      @johnslugger@johnslugger10 күн бұрын

  • Your videos are incredible, you're definitely the channel I share the most because of how cool these inventions are. Keep up the great work!

    @Carljouannet@Carljouannet2 ай бұрын

    • Thank you, I put a lot of passion into my projects and my videos. I'm honored you are here to enjoy them.

      @PlasmaChannel@PlasmaChannel2 ай бұрын

  • I have been wanting to build something like this ever since "Join the technicians" built a wand with this principle. You explained it way better, so maybe now I can.

    @zep4814@zep48142 ай бұрын

  • Bro i am watching you from 100k plasma family till now and there no video in your channel which i havent watched. Mind blowing video quality and content holding me attached with you. Take love bro and keep going❤❤❤

    @mrlilor9124@mrlilor91242 ай бұрын

  • That's really cool, I'd totally buy one of those

    @idontcare-ct7jm@idontcare-ct7jm2 ай бұрын

  • That's incredible

    @purplrshadowyay@purplrshadowyayАй бұрын

  • Easily the coolest toy I've seen a youtuber make.

    @mr.cantsay@mr.cantsay2 ай бұрын

  • Love it, awesome as always

    @Mrjrich37055@Mrjrich370552 ай бұрын

  • With each video you're getting closer and closer to becoming my favourite youtuber

    @H3Cki@H3Cki2 ай бұрын

    • I'm honored to hear that. Thank you so much.

      @PlasmaChannel@PlasmaChannel2 ай бұрын

  • Fascinating Captain.

    @JeffBrazeel-fe4wc@JeffBrazeel-fe4wc2 ай бұрын

  • Well done!

    @coder0xff@coder0xff2 ай бұрын

  • OK, that thing is completely awesome! I have to have one!

    @DanielGBenesScienceShows@DanielGBenesScienceShows2 ай бұрын

  • looks cool af

    @bronzehawk3646@bronzehawk36462 ай бұрын

  • As always, you never disappoint!

    @lawrenceboarerpitchford5732@lawrenceboarerpitchford57322 ай бұрын

  • Very cool project man. Nice job!

    @TroyPowersPowerfulInnovations@TroyPowersPowerfulInnovations2 ай бұрын

  • Hi Jay Lovely device, yes a bigger one needed bro this is simply Awesome

    @Yaman-D-Chhaya@Yaman-D-Chhaya2 ай бұрын

  • Amazing you are a true master of science

    @presleyfleckmotorizedbikef4285@presleyfleckmotorizedbikef42852 ай бұрын

  • Damn that’s impressive!

    @_spartan11796@_spartan117962 ай бұрын

  • Very cool concept.👍 Looking forward to more.

    @garybennett8880@garybennett88802 ай бұрын

  • Your onto something there ❤❤❤

    @christiancrow@christiancrow2 ай бұрын

  • Amazing dude

    @Trushaggyful@Trushaggyful2 ай бұрын

  • Looks like a 50s era sci fi ray gun love it

    @IanZainea1990@IanZainea19902 ай бұрын

  • Oh I need this.

    @fulgerion@fulgerion2 ай бұрын

  • Great project. Bigger is always better. I am curious to see your take on a mass driver.

    @davidcanoy8579@davidcanoy85792 ай бұрын

  • Crazy. Cool. Crazy cool.

    @bmobert@bmobert2 ай бұрын

  • Love how you inspire the youth too🤙🏼

    @person.00.@person.00.2 ай бұрын

  • So good!

    @dennis_mihaylov@dennis_mihaylov2 ай бұрын

  • I've gone an copied this build and it's fantastic.. for different purposes though.. very fun, well done that man!

    @richardward6747@richardward67473 күн бұрын

  • That's the coolest thing i've seen today

    @Hubobobuh@Hubobobuh2 ай бұрын

  • Right, it's almost there !

    @joelee24@joelee24Ай бұрын

  • Some manufacturer in china is probably working on a $.79 verion of this for Temu! Congrats!! This is truly awesome!! ❤

    @kerzwhile@kerzwhile2 ай бұрын

  • It's not often I get to go on some crazy video and say "I did exactly that in middle school in the 90s!"

    @kevinwhite6176@kevinwhite61762 ай бұрын

  • you should do basic classes, you are a great teacher for such complicated projects, I bet you would be great teaching basic eletrodynamics and eletrostatics!

    @mcarooney@mcarooney2 ай бұрын

  • More power!

    @hakarthemage@hakarthemage2 ай бұрын

  • That is awesome

    @elijahmashter9587@elijahmashter95872 ай бұрын

  • I see tons of potential with this design aswell ⚡

    @Rafale0744@Rafale07442 ай бұрын

  • Go BIG!!!

    @user-mh5se3th4j@user-mh5se3th4j2 ай бұрын

  • That turned out amazing Jay!

    @nigel-matthews@nigel-matthews2 ай бұрын

    • Thanks Nigel, I appreciate that. I'm already starting work on version two. Mostly because i just love the ray gun haah.

      @PlasmaChannel@PlasmaChannel2 ай бұрын

  • that door handle shock was personal

    @hudsonchappell3256@hudsonchappell32562 ай бұрын

  • THANKS TO YOU GENIUS. !!! YOU MADE IT COME A REALITY , CONGRATULATIONS 👍💯 . LOVE WHAT YOU DID . KEEP IT UP AND GOD BLESS 🙏☝️

    @av2217@av22172 ай бұрын

  • Lets goooo, build a large version!

    @mr.solo7270@mr.solo72702 ай бұрын

  • A plasma machine gun, that would be amazing!

    @user-ut4hj7xk5j@user-ut4hj7xk5j2 ай бұрын

  • The artificer explaining their new Wand of Shocking Grasp

    @davegonz6016@davegonz60162 ай бұрын

  • Awesome video mate! I randomly came across this video and really enjoyed it 😊 I enjoy learning and experimenting with various subjects, is there any chance you can share the design? Or do a video on where to get the parts and how to build the circuits?

    @MrPetrovich83@MrPetrovich832 ай бұрын

  • Awesome work man. That seam at the top of the gun is super noticeable though, maybe print a stylish thin strip to be glued on top to cover it up?

    @aProperFox@aProperFox2 ай бұрын

  • Ok that is rly awesome!! you should make a backpack mounted one

    @LeagueKnight@LeagueKnight25 күн бұрын

  • This has been my favorite video so far. I'm so fan of ray guns and all the sci fi behind it hahaha, grown up playing CoD haha.

    @raulcantu6998@raulcantu69982 ай бұрын

    • Hey, I’m honored to hear that. Thanks for watching my videos!

      @PlasmaChannel@PlasmaChannel2 ай бұрын

  • I genuinely need to get in touch with you after this video. I've been working on a MASSIVE project for 6 years now and was looking into a Cockroft and Walton generator for a high voltage discharge. This video about sums up what I need, but much larger...

    @pavulon404@pavulon4042 ай бұрын

  • You and electroboom I enjoy watching about these electronic videos. Keep up the good work on the videos. you too collaborate sometime lol that would be something to see.

    @ciebriel79@ciebriel792 ай бұрын

  • We’re making it to round 100 with this boys🗣️🗣️🔥🔥

    @Chicken2054@Chicken20542 ай бұрын

  • Cool little video, makes me want to build one inside a proton pack for an epic Ghostbusters costume.

    @fuzzydragoncosplay955@fuzzydragoncosplay9552 ай бұрын

  • ElectroBOOM needs to look at this! Also, I need this exotic asap

    @DragonKhy@DragonKhy2 ай бұрын

  • So... You had someone "over for dinner" and just *happened* to build a really cool lightning gun? Press X to doubt 😂

    @Renegade-re4vs@Renegade-re4vs2 ай бұрын

  • SOOOOKO AWESOM!!!!!!!!

    @Stevenyoung100@Stevenyoung1002 ай бұрын

  • I see a lot of potential for this, both destructive and non destructive

    @lieffian@lieffian2 ай бұрын

  • Now I want to see a full rifle version. Imagine the voltage when you have triple the space to use!

    @michaelmenafro888@michaelmenafro888Ай бұрын

  • Wow this is very interesting

    @philipanderson9434@philipanderson943416 күн бұрын

  • Boromir is cool as always! 💥

    @rsmstudio4634@rsmstudio46342 ай бұрын

  • I would love to see you do a Cold Plasma project. One really good use for a cheap Cold Plasma generator would be to pre treat low energy plastics to make them accept glue.

    @FlyMIfYouGotM@FlyMIfYouGotM2 ай бұрын

  • Build full scale version. Yes please. Millions of volts

    @markoneil8286@markoneil82862 ай бұрын

  • love the Ruger

    @Zach1987usa@Zach1987usa2 ай бұрын

  • Absolutely a bigger version as big as a house!

    @smokenjoe4022@smokenjoe40222 ай бұрын

  • Upon reading the title i thought this was either styropyro or electroboom lol. I'm glad you're carving your own legend into existence.

    @grekygrek@grekygrek2 ай бұрын

  • Very nice! Maybe you can focus it more with an ionizing UV laser strapped to the side.

    @curiosity_saved_the_cat@curiosity_saved_the_cat2 ай бұрын

  • Definitely build a bigger one!

    @CanonRulesSaysGod@CanonRulesSaysGod2 ай бұрын

  • I love the ideas you come up with. Great minds think alike. Have you entertained the idea of a self-defense tazer glove or gauntlet?

    @williamjester3196@williamjester31962 ай бұрын
KZhead