Jaguar XF 3.0d Cutting out, Gearbox Fault, ABS Fault displayed on dash
2024 ж. 15 Мам.
9 488 Рет қаралды
This Video will show you that the message you see on driver display is not always accurate.
Follow us on Facebook www.fb.com/testingnotguessing
This Video will show you that the message you see on driver display is not always accurate.
Follow us on Facebook www.fb.com/testingnotguessing
Good stuff. May want to get a microphone for when you’re a distance from the camera
Hi pal. Another great video. Thanks. Can I suggest a personal microphone that enables your voice to be heard more clearly. The starting few minutes and also the last parts of the video were hard to hear over the engine noise and the background music noise. My hearing is not what it used to be:)). Cheers
Glad you guided us through that one as I was about the dissappear down a rabbit hole with that list of codes.
Another great video of keeping to the facts and following back 👏 👍🏻
Always take something away from the videos and this was no exception. Sound quality wasn’t great on this but with the compressor running in the background I’d struggle to hear even standing next to you. Look forward to the next one.👍
Another great video, these are extremely informative 👌🏻👌🏻
Always pick up something from your videos. Thanks
He's back
I have the same issue with my car can you suggest to me what should I have to do?
Nice one Gary.
Fun fun fun doing a CAS on this engine !!!! Must use the proper JLR fitting too also.
Hii Thanks for this Great job. From india
nice one
Don’t know if this makes sense but after it cut out and wouldn’t restart the tachometer was not showing any rpm as the starter motor was clearly spinning the motor over. This made me guess at the crank position sensor as I assume this is where it picks up it’s rpm data. Remember guys I’m only guessing so be kind if I’m miles away.
No you’re dead on the money there, the fact there’s no speed signal being generated the tacho will not react. But, this is not definitive proof, if there was a comms issue from PCM to instrument cluster there would be no activity from tacho.
@@intelligentauto737 Not all tacho's will register during cranking.
I am worried about this problem in my car
have the same fault, mine wont start at all , any suggestions?
Scope the CAS and if sensor appears to be dead then replace it??
@@timbo19751975 turns out I need a new battery mate , showed loads of different codes
Identical to what my jag is doing although I haven't had time to read the codes yet the disc gearbox abs faults all came up I put that down to rolling with the engine off was this the final solution?