How To Clean/Maintain Your Motorcycle (Spoke) Wheels
0:00 Intro
0:20 Spoke vs Cast Wheels
1:24 Video Title & Greetings
2:16 The Setup & Info
3:45 The Tools & Materials Needed
4:11 Things To Avoid
6:01 The Preparation (Softening Hard Material)
7:56 Spoke Steam Clean-1st Way
8:44 Wheels Easy Way-Baby Wipes
10:42 Spoke Clean-2nd Easy Way
11:31 Dry Wheels
12:35 Treat Rust
14:34 Spoke Covers-Alternative
16:24 Thanks & Ride Safe
Another episode of my Dr Vstrom Motorcycle Hacks, video series on how to clean & protect your spoke wheels.
Post your comments/questions below & contact me on FB for advice, thoughts & tips.
If you wanna support my videos, or request to review your products, do so at:
-PAYPAL ID: parapontisi@gmail.com
Wanna chip a dollar or two & support the Doc? I am very grateful as videos cost both in money & time. All donations go towards my videos in equipment & products.
Your support means a lot to me whether its expressed as a dollar/euro sign or a simple thank you comment.
Thanks for watching & Ride Safe!
DrV
Music used in video:
--------------------------------------------------------------------------------------------
Ṿ Ʌ Ẏ U - Reflections
--------------------------------------------------------------------------------------------
Support: / reflections
Support Ṿ Ʌ Ẏ U / iamvayu
/ i.am.vayu
/ wavewithvayu
--------------------------------------------------------------------------------------------
NCS Music Used
Groove It ?? ?? ®?Zayfall ?? Download There: / g. . ---------------------------------------------------------- ?? Follow me on these networks ?? ZAYFALL: ? Soundcloud: / zayfallmusic ? Facebook: / zayfall ? Instagram: instagram.com/zayfall/?hl=fr ? Twitter: / zayfall_music
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
--------------------------------------------------------------------------------------------
Lightness by Nomyn / nomyn
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Lightness - Nomyn (No ...
---
• Contact the artist:
nomynmusic@gmail.com
/ nomyn
/ nomynmusic
open.spotify.com/artist/5VbsC...
/ nomynmusic
kzhead.info/tools/f1r.html...
Thank you! Next up: how to check and tighten your spokes 😉.
It's really a treat to see you explain things so deliberately & crisp. Thanks a lot. Roby Tom
Thanks Roby, I appreciate the kind words. Please share my channel with other vstromers to support the effort. Ride safe.
Baby wipes, I will try them next time 🤣
I find a lot of car detailing products and methods work well on motorcycles as well. A motorcycle is a bit different and you have to be careful but essentially its the same. I do a bit of car detailing and have detailed motorcycles as well and I can use the same products for both car and bike. I probably wouldnt recommend baby wipes as your rubbing the dirt back and forth into the finish. Defineatley not on paint work! Yup steamer works well with a bit of ONR added in. Thanks for the video!
Nice i do use ACF-50 with them!
Great ideas. I've ordered that steam cleaner. I had almost bought one when ChrisFix recommended one for getting gum and sticky stuff out of carpets in cars but this gives me another reason to buy one.
Thanks
Good to see you back!
Hi John nice to see your videos again. Very instructive as usual and great to watch and,as always, to learn something new. Keep it up. Ride safe. Alex, Italy
Thanks my friend :)
Thank you. I will definitely clean my V Strom spoke wheels next time.
Glad it helped
Very good tips 👍😉
love your cat! 😍
Very Good.
Thanks :)
Very informative and full of tips! Subscribed your channel. By the way your rear axle nut seems to be something like upgraded one. Please share information about this. Thank you from Japan!
Thanks for the kind words. Yes, you are right the rear axle nut is an aftermarket from pro bolt www.pro-bolt.com/titanium-axle-nuts-bolts/. here is another video from my channel where a simple comparison is made between the OEM, this one and a titanium one kzhead.info/sun/ZbqloZijaaxjoa8/bejne.html . May I also ask if in Japan there is a Vstrom facebook group or other forum?
Can you tell us what type, brand spoke covers did you use? Do you have any recommendations? Thanks in advance! I really appreciate you videos!
I dont use them cause my spokes are fine but bykas have good quality.
I use Ballistol after cleaning the spikes
Thanks for sharing this info.
@@DrVstrom Thank you for your Videos! I profit from them several times. Many concentrated and competent information.
@@Henry-xj2pi happy to hear this :) spread the word then and ride safe.
You advised to use OEM Oil filter , what about brake pads ? Which one do you recommend for the 650 ? Thanks, Roby
Yes OEM brake bads are also good choice and last long. Some might say that other brands help you stop better but lets face it, the vstrom is not a racing bike and not all brake pads are tresting the brake discs as they should.
🙏🙏 Will certainly do spread it - like rain 🌧️
Hi! I have a 2008 V-Strom 650 DL, with 18.000 km. What motor oil do I need and which oil filter. Thank you!
Alexandre, for the summer any oil within the specs of Suzuki and for Hot climates in the summer I recommend 10w50 or 15w50. !0w 40 also does the job. Good brands are ecstar, bel ray, motul by suzuki, etc. The oil filter always buy the suzuki one. The specifications for oil are explained on your manual and in this video which shows the entire process and explains everything. Ride safe kzhead.info/sun/hd2PZ7KleqZ4aH0/bejne.html
Καλησπέρα κ συγχαρητήρια για τα βιντεακια σου είσαι πολύ αναλυτικότατος . η ερώτηση μου είναι τι ακριβός καθαριστικά χρησιμοποιείς για τις ακτίνες κ γίνονται καινούργιες εκτός από τα βρεγμένα πανάκια. Ευχαριστώ
Τον ατμοκαθαριστη και μωρομαντηλα
Hi I have DL 1050 xt 2022 the rear spoke have shoving some black pitting not rust can't clean with nothing I use .The last I use brake cleaner with no results .Only solution is polish them but I don't now are they stainless steel or galvanised .The Bike is 5 months old with 3000 km and I find meny people have same issue. Any suggestions tnx
You are entitled to ask your Suzuki dealer to replace the spokes. It's a known issue
The 12 Volt output has stopped working - can you please guide as what I can check ? Thanks in advance Roby
The line that gives power for cuts and continuity & the fuse associated with it. Did you connect a device that draws lots of power?
I connected an air pump Is that too much ?
@@robytom8777 yes that was the cause. Only gps or phone. The pump is only directly from ghe battery. I think there is a 3Amp fuse that should be bad now. Check & replace
@@DrVstrom Thanks a lot. Is this fuse under the seat with other fuses or in some other location ?
Καλησπερα η v strom του 20 ειναι η πρωτη μου μοτο και θα ηθελα να σας κανω κάποιες ερωτησεις μπορώ να επικοινωνήσω μαζι σας καπως?
Ναι απο εδω. Ετσι απο τις ερωτησεις σου θα επωφεληθουν κ αλλοι vstromers.
@@DrVstrom Θα ήθελα να μάθω αν υπάρχει κάποια λίστα με όλα τα απαραίτητα εργαλεία που θα πρέπει να έχω για όλες τις εργασίες συντήρησης που περιγράφετε σε όλα τα video και αν προτείνετε κάποιο κατάστημα. Επιπλέον θέλω να βρω κουκούλα και δεν ξέρω αν θα ταιριάζει.
Ροποκλειδο(α) να καλυπτουν 6 με 100 Nm ροπες. καλη συλλογη καστανια και καρυδακια και καρυδακια αλεν (μεχρι 12). Ισως κλειδι για το φιλτρο λαδιου που μπαινει σε καστανια για να μπορεις να σφιξεις ροπες. Αυτα ειναι τα βασικα. Κουκουλα εξαρταται αν εινα εκτεθιμενη στον δρομο ηλιο βροχη και εαν η μηχανη ειναι σκετη η την εχεις μονιμα με βαλιτσες