Our Director of Engineering, Charles, walks us through the initial fuel tank setup on a SIMRAD.
Пікірлер
Nmea system on sinrad go 9 reads 78 gallons but there is approximately 32. Can not get it to read correctly. Maybe sensor trying to read from both vessel and nmea system? Worked find for a year and nmea went off. Finally got bus back on.
@probman129 ай бұрын
Thank you!
@justinleland9 ай бұрын
Do you have to calibrate or do any steps every time you fill up the tank with fuel ?
@fastidolsportfishing37282 жыл бұрын
If I need to re-calibrate with a full tank of gas. Can I remove the sending unit to simulate an empty tank of gas?
@billbench9598 Жыл бұрын
Hi, how can i setup the fuel with the gás tank full…i did not calibrate with empty tank😢
@marcooliveira55958 ай бұрын
There is no fuel app on left when I go into settings? I have Simrad NSX9. Help? I have Garmin GFS10 on NEMA 2000
@SF-rl7hl6 ай бұрын
Anyone instaled on nmea2000 network the liquid sensor for fluel tank KUS liquid sensor NS5? Each videos for Simrad needs to calibrate the sensor, but yesterday i instaled this sensor on my simrad evo3s and dont need . Acuse imediatly full tank. Thanks
@andrebandeiras79312 жыл бұрын
We recently purchased a new boat but did not calibrate it when the tank was empty. We only did calibrated it once we filled up the tank to full. Now it only reads full and does not go down when we use it. Any idea as to why or what we need to do to fix it?
@NickSavino3 жыл бұрын
same with me these suck now you need to drain the tank to set it up? getting a Garmin
@1dotele3 жыл бұрын
I've seen one that had a bad fuel tank sensor that converts the analog signal from the sender to the digital needed at the Simrad and it can cause this problem and need to be replaced. It's generally under the dash and connects to the NMEA network backbone. Your dealer can handle it. Garmin is great if you're looking for basics but the Simrad really is a lot better. I've used them all. Also, this generally works fine without the calibration. I would skip that part entirely.
Nmea system on sinrad go 9 reads 78 gallons but there is approximately 32. Can not get it to read correctly. Maybe sensor trying to read from both vessel and nmea system? Worked find for a year and nmea went off. Finally got bus back on.
Thank you!
Do you have to calibrate or do any steps every time you fill up the tank with fuel ?
If I need to re-calibrate with a full tank of gas. Can I remove the sending unit to simulate an empty tank of gas?
Hi, how can i setup the fuel with the gás tank full…i did not calibrate with empty tank😢
There is no fuel app on left when I go into settings? I have Simrad NSX9. Help? I have Garmin GFS10 on NEMA 2000
Anyone instaled on nmea2000 network the liquid sensor for fluel tank KUS liquid sensor NS5? Each videos for Simrad needs to calibrate the sensor, but yesterday i instaled this sensor on my simrad evo3s and dont need . Acuse imediatly full tank. Thanks
We recently purchased a new boat but did not calibrate it when the tank was empty. We only did calibrated it once we filled up the tank to full. Now it only reads full and does not go down when we use it. Any idea as to why or what we need to do to fix it?
same with me these suck now you need to drain the tank to set it up? getting a Garmin
I've seen one that had a bad fuel tank sensor that converts the analog signal from the sender to the digital needed at the Simrad and it can cause this problem and need to be replaced. It's generally under the dash and connects to the NMEA network backbone. Your dealer can handle it. Garmin is great if you're looking for basics but the Simrad really is a lot better. I've used them all. Also, this generally works fine without the calibration. I would skip that part entirely.