KZhead
Тәжірибелік нұсқаулар және стиль

Cheap TEMU Woodworking Tools that are Actually GOOD!

731 Woodworks
2023 ж. 30 Қыр.
419 121 Рет қаралды
Жүктеу

These are the best woodworking tools I found on Temu.
Videos To Watch Next
WORST TEMU Tools I Found - • I Spent $500 on Tools ...
PLANS: www.731woodworks.com/store
Greatest Free Gift I've Ever Received: story4.us/731Woodworks
Tools in this Video:
Router Bit Set Up Gauges - temuaffiliateprogram.pxf.io/z...
Kreg Set Up Gauges - amzn.to/45bNmCO
Silicone Mat - temuaffiliateprogram.pxf.io/X...
Rockler Silicone Mat - amzn.to/46th1s7
Glue Brush Kit (TEMU) - temuaffiliateprogram.pxf.io/A...
Glue Brush Kit (Amazon) - amzn.to/3tdNc0l
Paint Cones (TEMU) - temuaffiliateprogram.pxf.io/G...
Paint Cones (Amazon) - amzn.to/3ro0eba
Machinist Square - temuaffiliateprogram.pxf.io/7...
T-Track - temuaffiliateprogram.pxf.io/k...
Sanding Mouse (TEMU) - temuaffiliateprogram.pxf.io/Y...
Sanding Mouse (Amazon) - amzn.to/3ZEG3lZ
Bit Height Set Thingy - temuaffiliateprogram.pxf.io/D...
Magnetic Wrench Organizer temuaffiliateprogram.pxf.io/B...
Plastic Wrench Organizer - temuaffiliateprogram.pxf.io/z...
Tekton Wrench Set with Organizer (Amazon) amzn.to/3LGLfQm
Wood Tray - temuaffiliateprogram.pxf.io/Z...
Baby Hippo - temuaffiliateprogram.pxf.io/V...
Digital Angle Gauge (TEMU) - temuaffiliateprogram.pxf.io/j...
Wixey Digital Angle Gauge (Amazon) - amzn.to/3RAPi4x
Radius Gauges for Routers - temuaffiliateprogram.pxf.io/g...
Magnets (TEMU) - temuaffiliateprogram.pxf.io/W...
Magnets (Amazon) - amzn.to/3ZFkkKI
Stop Ruler - temuaffiliateprogram.pxf.io/j...
Tenon Gauge - temuaffiliateprogram.pxf.io/5...
Feeler Gauges (TEMU) - temuaffiliateprogram.pxf.io/D...
Feeler Gauges (Amazon) - amzn.to/3LIhs9Z
Metal Pry Bar - temuaffiliateprogram.pxf.io/A...
Fake Domino Tenons - temuaffiliateprogram.pxf.io/0...
Real Domino Tenons (Amazon) - amzn.to/3RLFh4J
TEMU Stop Block - temuaffiliateprogram.pxf.io/P...
Stop Block I Use (Amazon) - amzn.to/3LJNQJf
Angle Set Gauge - temuaffiliateprogram.pxf.io/E...
T Bevel - amzn.to/46skjMc
SawSet - amzn.to/3PAPGgF
DOT Journal (TEMU) - temuaffiliateprogram.pxf.io/r...
Dot Journal (Amazon) amzn.to/46wBwnH
Pencil I Use - amzn.to/3EZCkpC
📲 Text DEALS to 1 (731) 207-7151 I send out regular texts to let you know about great tool deals.
Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Add the word VIDEOS to the text to be alerted when I post new content.
The full list of tools and supplies I recommend can be found on my website: www.731woodworks.com/recommen...
Other Tools/Equipment I Use and Recommend:
Ariat Work boots I wear (super comfortable) - ariat.dkkdet.net/9gJ5BY
Table Saw I Use - amzn.to/44XhPF5
Miter Saw I Use - amzn.to/3OqDIWi
Table Saw Blade I'm Using - shrsl.com/3xv5i
Toolbox in Background - homedepot.sjv.io/x9B2xy
Tool Organization Wall over Miter Station - amzn.to/45cQUFa
Digital KZhead Sign - amzn.to/3GL2a2e
Only Work Clothes I'll wear = TrueWerk Work Clothes - truewerk.pxf.io/GmbJjE
Camera Gear I Use - kit.co/731Woodworks/camera-ge...
Computer Equipment I Use for Editing - kit.co/731Woodworks/731-woodw...
🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! / 731woodworks
You can also join via channel memberships to get access to the perks:
/ @731woodworks
Get $10 off any order of stickers, labels, and more using this link: www.stickermule.com/unlock?re...
Disclaimer: Please see the link for our disclaimer policy for all of our videos on the 731 Woodworks KZhead channel www.731woodworks.com/youtubed...
Some product links are Amazon and other affiliate links, meaning if you buy something, we'll receive a small commission. This helps support my channel so I can continue to make content like this.
#tools #temu #woodworking

Пікірлер

  • Watch Next: WORST TEMU Tools I Found - kzhead.info/sun/o5qGZK2dpnmvp40/bejne.html Recommended Better Alternative Tools (If you use one of these Amazon and other affiliate links, I may receive a commission) Router Bit Set Up Gauges - temuaffiliateprogram.pxf.io/zN0vjx Kreg Set Up Gauges - amzn.to/45bNmCO Silicone Mat - temuaffiliateprogram.pxf.io/XYrRYM Rockler Silicone Mat - amzn.to/46th1s7 Glue Brush Kit (TEMU) - temuaffiliateprogram.pxf.io/AWAQgJ Glue Brush Kit (Amazon) - amzn.to/3tdNc0l Paint Cones (TEMU) - temuaffiliateprogram.pxf.io/GmQkb6 Paint Cones (Amazon) - amzn.to/3ro0eba Machinist Square - temuaffiliateprogram.pxf.io/75DVXV T-Track - temuaffiliateprogram.pxf.io/k0kv4x Sanding Mouse (TEMU) - temuaffiliateprogram.pxf.io/Y9jYRq Sanding Mouse (Amazon) - amzn.to/3ZEG3lZ Bit Height Set Thingy - temuaffiliateprogram.pxf.io/DKqmyq Magnetic Wrench Organizer temuaffiliateprogram.pxf.io/B0G904 Plastic Wrench Organizer - temuaffiliateprogram.pxf.io/zN0vN7 Tekton Wrench Set with Organizer (Amazon) amzn.to/3LGLfQm Wood Tray - temuaffiliateprogram.pxf.io/ZQmzQW Baby Hippo - temuaffiliateprogram.pxf.io/VmQKmk Digital Angle Gauge (TEMU) - temuaffiliateprogram.pxf.io/jr54ea Wixey Digital Angle Gauge (Amazon) - amzn.to/3RAPi4x Radius Gauges for Routers - temuaffiliateprogram.pxf.io/g1r7Ov Magnets (TEMU) - temuaffiliateprogram.pxf.io/Wq9zOO Magnets (Amazon) - amzn.to/3ZFkkKI Stop Ruler - temuaffiliateprogram.pxf.io/jr54eb Tenon Gauge - temuaffiliateprogram.pxf.io/5gqG5o Feeler Gauges (TEMU) - temuaffiliateprogram.pxf.io/DKqmyG Feeler Gauges (Amazon) - amzn.to/3LIhs9Z Metal Pry Bar - temuaffiliateprogram.pxf.io/AWAQWD Fake Domino Tenons - temuaffiliateprogram.pxf.io/0Zn5GY Real Domino Tenons (Amazon) - amzn.to/3RLFh4J TEMU Stop Block - temuaffiliateprogram.pxf.io/PyAP6M Stop Block I Use (Amazon) - amzn.to/3LJNQJf Angle Set Gauge - temuaffiliateprogram.pxf.io/EKxP09 T Bevel - amzn.to/46skjMc SawSet - amzn.to/3PAPGgF DOT Journal (TEMU) - temuaffiliateprogram.pxf.io/rQ0yQB Dot Journal (Amazon) amzn.to/46wBwnH Pencil I Use - amzn.to/3EZCkpC 📲 Never miss another tool deal. Sign up for my Tool Deals SMS Alerts - NOTE: I text out tool deals so you don’t miss any! text DEALS to 1 (731) 207-7151 Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Important to add the word DEALS to the text! 🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! www.patreon.com/731woodworks Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

    @731Woodworks@731Woodworks7 ай бұрын

    • Stop that stupid look bs

      @sartorst3376@sartorst33766 ай бұрын

  • Thanks for the updated video on what item that you found that we good to buy in your opinion, I was mostly interested in that router radius corner chamfering tool, plus the router setup bars, but the whole video was helpful for someone like me who is just starting out on a budget.

    @randywilson4529@randywilson45297 ай бұрын

  • Found your channel and got the inspiration to start woodworking as a side hustle. Maybe even one day full time! I'm also from Arkansas, so seeing that you are too is awesome. Thanks for the inspiration and building advise!! WPS!

    @Mjayy501@Mjayy5017 ай бұрын

  • I got the paint cones too. Here's a tip: because they leave scratches easily because they are pointed, put a piece of tape or on the tip or even dip it in epoxy for a smooth surface.

    @williamdanaher2574@williamdanaher25747 ай бұрын

  • Have you ever thought about building a slab table? Not necessarily a river table but just any kid of slab table. I’d love a build video of that. And I already know how successful slab table build are on KZhead. Something you should definitely consider!

    @MichaelBane-hv1rs@MichaelBane-hv1rs7 ай бұрын

  • Thanks, Matt. I've also had mixed luck with Temu. That pry bar is a hive tool for beekeeping.

    @no1slisteninganyway@no1slisteninganyway7 ай бұрын

  • Good I love cheap good stuff. When I was a kid I was always fascinated with the Ben Franklins and other 5 and 10 cent store. Dollar Tree and flea markets. I don't need or want the stuff but it is amazing to me when you can get genuine useful stuff so cheap. Thanks.

    @flashwashington2735@flashwashington27357 ай бұрын

  • Thank you for showing the OK items from Temu. That will help me alot. I also get the mini or midi crafts items from Temu for the Kids so they can paint them and hang them up on the Christmas Trees. God Bless you.

    @danielparker6102@danielparker61027 ай бұрын

  • Those little trays with an inspirational quote would sell like fire! Be excellent to add to savings for your next big tool! I like to make my woodshop pay for itself!

    @dondale68@dondale686 ай бұрын

  • This is awesome actually!!! I've been hesitant about buying products from this site. One thing that I have had my eyes on was some of the after market replacement miter gauges for table saws ( and some other table saw accessories) that are offered. If you or anyone else has "braved" the cost of testing out some of the miter gauges, please let me know. They are very expensive, they range from $30 to $60 bucks or so..... nothing outrageously priced, but when you live on an extremely tight budget, every little dollar counts!!!! Again, thanks for any type of information!!

    @ericwilliams538@ericwilliams5387 ай бұрын

  • After watching your vids on Ryobi tools I am now the owner of most of the gooduns thanks to you & your reviews they are all outstanding work horses for the D I Y r thankyou so much for taking the time & risk of buying all the tools & testing them keep up the good work

    @garybrooks2730@garybrooks27303 ай бұрын

  • Thanks for the tip

    @user-if2ns8yz2u@user-if2ns8yz2u7 ай бұрын

  • Good video Matt. Lots of good stuff. Tried to get a couple of items but sold out. I am on the notify list.🙂

    @flatlander523@flatlander5237 ай бұрын

    • Occasionally a different vendor will have the same item. There should be a "shop similar" button on the sold out item. When it takes you to a different vendor they are often the exact same product. Not ALWAYS, mind you (so don't come and say I said ALWAYS lolol), but OFTEN! Have a great day and happy Temu shopping! 🙂

      @eva-justice-heath7053@eva-justice-heath70534 ай бұрын

  • Thanks for the video!

    @Jeff_369@Jeff_3697 ай бұрын

  • Hi Matt! I love your videos! I get lots of inspiration and inFORmation on subjects I never would have thought of. So, thank you for sharing your talent with us. Just so you know, I had to call Temu customer support once and actually asked about the pronunciation and... well... you're doin' it wrong! lol It's a LONG e with emphasis on the first syllable: "TEE-moo." Thanks for sharing the good the bad and the ugly so those of us just starting out don't waste money on junk that doesn't work (i.e. the handheld router you tried - I ALMOST bought one!) Have a Happy, Healthy and Blessed Not Stressed New Year!

    @eva-justice-heath7053@eva-justice-heath70534 ай бұрын

  • I've bought a LOT of small tools from Temu and the only one I've had a problem with was the countersink bit. I used it on a steel bed frame I was repurposing and they dulled after just a few seconds of use. They would probably work fine on wood, but they were supposedly titanium, so I figured they'd be fine.

    @GrantOakes@GrantOakes7 ай бұрын

    • Don't forget that steel bed frames are made of tempered steel, they are extremely hard and tough or any drill or countersink to get thru.

      @dc6233@dc62336 ай бұрын

    • quick google on drilling steel bed frames would have saved you a lot of trouble.

      @CowsGoM3ow@CowsGoM3ow4 ай бұрын

  • Love your channel and your subtle messages, Keep the inspiration coming.

    @NPOAfterMidnight-ft9zj@NPOAfterMidnight-ft9zj7 ай бұрын

  • Nice to see few them hidden gems there matt am gonna take punt on few more things shortly 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍

    @michaelwillson6847@michaelwillson68477 ай бұрын

  • I hadn't even heard of Temu until I saw ads on Facebook for an aluminum crosscut thing for a table saw. It was like $39 so I immediately figured it was trash. It would be interesting to see those tested because it *looks* like the ones selling for several hundred dollars.

    @Wraith3Snpr@Wraith3Snpr7 ай бұрын

  • Every thumbnail this dude looks like he’s seeing his first pair of knockers 😂

    @austinbasiolli2705@austinbasiolli27057 ай бұрын

    • But you clicked 😂 so it’s working. 👊🏻

      @731Woodworks@731Woodworks7 ай бұрын

  • Matt, Just a note about your comment with the "T-tracks and arriving safely with their shipping technique. I ordered a set of 2 of their T-tracks, and they arrived in fine shape. Howvere, not being metric savvy, I ended up with 30 30mm tracks. I re-ordered the appropriate 19mm ones which equate to the 3/4" imperial measurement. They also arrived as straight as an arrow. So, I'm 4 for 4 on straight tracks 😁

    @joemcdonald8516@joemcdonald85167 ай бұрын

  • Thanks for checking them out. It's good to know you can find quality products for considerably less money. Now I can get some things I've been hesitant to because of the prices. I'm impressed! 😊😊😊

    @garymiller5937@garymiller59377 ай бұрын

  • Estás herramientas hacen los mismo que las costosas y hacen bien el trabajo. Por cierto, también en AliExpress se encuentran estos productos y me parece que un poco más económicos. Saludos desde México 🇲🇽

    @maratala@maratala7 ай бұрын

  • Thank you!

    @brendasmith1533@brendasmith15337 ай бұрын

  • 36 degree would probably be for something 10-sided, or 5-sided depending on how you're cutting things.

    @p24t@p24t7 ай бұрын

  • I also got the machinist square, and mine was dead-on accurate too. Pleasant surprise!

    @joshua1281@joshua12813 ай бұрын

  • Those set up gauges are tempting

    @FixItFrench@FixItFrench7 ай бұрын

  • Those notebooks look like air hockey tables! 😂

    @ttapion1@ttapion17 ай бұрын

  • Thanks for the video you could do a video showing a laser engraver for the tray

    @motor.mental@motor.mental7 ай бұрын

    • He doesn't have a laser engraver

      @davidcorliss@davidcorliss7 ай бұрын

    • Thats just an idea for a review video maybe

      @motor.mental@motor.mental7 ай бұрын

  • Thanx so much for this video. I couldn't even make it halfway thru your Temu Trash video the other day. I'd seen Matthew Peech's Temu Trash video, too (I couldn't make it thru it either), & had pretty much written them off.

    @jonw6376@jonw63767 ай бұрын

  • Man I been watching you a long time. Please don't fall victim to the "all thumbnails have to make it look like I'm trying to get more than one hot dog in my mouth at the same time" thing.

    @danb5357@danb53577 ай бұрын

  • I tried paint cones, but they left marks on my guitar finishes. Is there a way to avoid that? Depending on the build, some guitars are easier to finish while lying flat. But finishing one side at a time doubles drying times.

    @normbarrows@normbarrows6 ай бұрын

  • Matt, I did not read through all of the 170+ comments, but the 36º setting on the angle gauge is for, among other things I guess, laying out and cutting 5 point stars. The process I'm familiar with uses 36º and the complimentary 54º angle

    @joemcdonald8516@joemcdonald85165 ай бұрын

    • Or because it is 1/10 of a circle 360

      @u3pyg@u3pyg5 ай бұрын

    • Also, 1/10th of your mom.

      @iandanger883@iandanger8833 ай бұрын

  • I keep several of those sanding mice in my shop, one for each grit sanding disk I have. I mark them with a black Sharpie marker so I don't have to guess which grit I'm grabbing. When the sandpaper wears out, I replace it with the same grit.

    @PaganWizard@PaganWizard6 ай бұрын

  • The prybar is a blunt bee keeper scraper! lol

    @brianpeterson8908@brianpeterson89087 ай бұрын

    • Lol no it isn't

      @johnthumble5154@johnthumble51547 ай бұрын

    • I thought the same. It's identical to my hive tool!

      @jonathanmathews7673@jonathanmathews76733 ай бұрын

  • Ok, what is with the baby hippo? Love it!

    @rachellelapre9238@rachellelapre92387 ай бұрын

  • just started watching this one and the yellow pointed triangles for painting, do they leave a dent in the other side? Had some similar round ones from amazon with a silicon base and black inserts with a tiny point for the purpose of lowest contact with paint or sealer. They put tiny divots everywhere they touched the surface.

    @keithf5236@keithf52367 ай бұрын

    • they can if the project is heavy enough

      @731Woodworks@731Woodworks7 ай бұрын

    • It was simple pine 1x4s for staining both sides and length was 3ft pcs

      @keithf5236@keithf52367 ай бұрын

    • @@keithf5236Anything will dent pine. But I’ve had them dent maple too.

      @Sam_Francis@Sam_Francis7 ай бұрын

    • @@Sam_Franciskinda bummed bc I figured the short sections of 1x4s would of weighed less to not do that. Disappointing so many creators say there great for painting and staining and giving a false hope it doesn't mar the surface.

      @keithf5236@keithf52367 ай бұрын

    • ​@@keithf5236sand down the points or epoxy them, seems fairly simple. Or even put tape on them, like 3+ layers of tape. I do this with a lot of projects, mostly using pine cuz its easy to get free scrap pine wood so I've learned to build on a budget

      @brucehansen7949@brucehansen79495 ай бұрын

  • 4:42 I needed a laugh. Thanks, Brother. 😂🤘

    @Jenisonc@JenisoncАй бұрын

  • Don’t know about the 36 but 35.3 is for a compound miter when cutting crown flat that has 45° spring angle. That’s the closest thing I can think of.

    @steffendetrick@steffendetrick7 ай бұрын

  • I think the 36 degree is so you can divide a circle into 10 segments? or if you were to cut 36 of the ends of 5 boards you could put them together to make a pentagon.

    @bradleyhenry4793@bradleyhenry47936 ай бұрын

  • Love the channel, just curious where you get your t-shirts from 😁🔥

    @maartenklem2272@maartenklem22723 ай бұрын

  • Please do the light shine test when eg showing if machinist square is flush

    @JustinShaedo@JustinShaedo7 ай бұрын

  • You mentioned a good set of Forstner bits on one of your videos, and now I can't find it. Thanks, Larry A.

    @larryaltman1872@larryaltman1872Ай бұрын

  • Nice job .

    @Drat_67@Drat_672 ай бұрын

  • Temu is good for fishing lures and I bought some hey dude look-alikes for $15.. I did buy a $2.49 speed square with a level, which was cheaper than my $99 trig jig 😂😅🤣 And a pocket hole jig for $9. I haven't tried yet 😅

    @DixieNormous1@DixieNormous17 ай бұрын

  • Did you check the ruler’s inch markings against a trusty ruler like a woodpecker?

    @21trips@21trips7 ай бұрын

  • We buy “Hyde “ bars, flat pry bars for like $4 at the local stores

    @kennethharman2779@kennethharman27797 ай бұрын

  • Good videos, to the point with no umming and arring.

    @billzorba9424@billzorba94244 ай бұрын

  • I just watched a news video out of Chicago tv news in which they reported that temu app was to be avoided due to severe privacy issues. My wife has ordered from them a few times and no problems but she uninstalled due to that video. Was wondering if anyone has had issues with them besides sometimes cheap products.

    @yellotang@yellotang7 ай бұрын

    • not had issue but saw similar video and have deleted it

      @DebsHill1@DebsHill17 ай бұрын

    • I have a strange issue. I keep getting a bunch of 1m long led strip lights in the mail. They're being sent to me using a different email and card but with my address. Since it's a different email, it's a different account, therefore I can't access it to change it. I'm not being charged anything. It almost seems like trolling. lol. I deleted my account immediately but they still come in the mail every few months. So I have about 20+ 1m long led strip lights that aren't interconnectable haha

      @ttapion1@ttapion17 ай бұрын

    • I know I need to contact them

      @ttapion1@ttapion17 ай бұрын

    • @@ttapion1 😂😂

      @DebsHill1@DebsHill17 ай бұрын

    • Also, I did order some of these lights last year on alibaba to see if it would actually arrive. I never ordered them on temu. Weird!

      @ttapion1@ttapion17 ай бұрын

  • What brand of toolbox do you have in your shop? I'm looking for options for my garage.

    @RMWrenchwerks@RMWrenchwerks6 ай бұрын

    • Husky

      @731Woodworks@731Woodworks6 ай бұрын

  • I got the same kinda wrench tray at harbor freight pretty cheap

    @Userjc2014@Userjc20147 ай бұрын

  • Saved this one.

    @JoeTheDIY@JoeTheDIY7 ай бұрын

  • You missed an opportunity to use the scene from My Cousin Vinny when the prosecutor says "Identical" for the tire patterns. You nailed the King Neptune scene.

    @thomasdaley2929@thomasdaley29294 ай бұрын

  • Hey mate, T bevel gauge has 36 degrees for pentagonal mitres

    @Individuality1990@Individuality19906 ай бұрын

  • That glue brush set with glue tray and spreader looks like a direct knockoff of Rockler’s. Not right and also not a good endorsement of it for that same reason. Just my 2 cents.

    @karlbenz8232@karlbenz82327 ай бұрын

    • The ones rockler sells are probably made at the exact same factory as the temu ones. Rockler or kreg dont own a factory that makes their products, they outsource. No reason to pay for the name.

      @corydenton756@corydenton756Ай бұрын

  • TEMU also sells plastic welding/repair material. If you break them, you can purchase the fixing material

    @williamweiss1096@williamweiss1096Ай бұрын

  • Good to know that there are some good buys out there and they work without blowing a lot of cash

    @The-Handsome-Devil@The-Handsome-Devil7 ай бұрын

  • 36 is one tenth of 360 degrees. So you could make a ten sided shape (measuring the outside angle from straight across)

    @RichardBuckman@RichardBuckman2 ай бұрын

  • I believe you tried something new in this video by using a meme or whatever you call it (lol). You nailed it, I laughed. Well done.

    @ttapion1@ttapion17 ай бұрын

  • Great video as always Matt love the smell the same made me laugh out loud the first time you said it. Will have to check out a few of these items.thanks for sharing as always

    @jimrosson6702@jimrosson67027 ай бұрын

    • Thanks!

      @731Woodworks@731Woodworks7 ай бұрын

  • I love temu! Bought so much . 99% of stuff was excellent!

    @patriciamatthews9620@patriciamatthews96207 ай бұрын

  • You have a 3D printer. Paint cones are now essentially free.

    @robertzarfas9556@robertzarfas95567 ай бұрын

  • Great video. Haven't purchased anything from this company yet but now will at least check it out. Also thought the Sponge Bob reference was quite funny!

    @JJAH28@JJAH287 ай бұрын

    • Thanks!

      @731Woodworks@731Woodworks7 ай бұрын

  • 36 degrees is the common measurements for a set of stairs. With the standard tread depth of 10" and rise of 7¼"

    @mediocremechanic3647@mediocremechanic36472 ай бұрын

  • 36`is for cutting crown molding I think

    @kevinmccarthy8670@kevinmccarthy86707 ай бұрын

  • nice clean review of good products, I have bought some of them already and used them.

    @patrickjames3954@patrickjames39547 ай бұрын

  • Dude! The Sponge Bob bit had me laughing!

    @Paul.Douglas@Paul.Douglas3 ай бұрын

  • I just spent $200 on there… that thing is a rabbit hole 😯

    @51percentproductions25@51percentproductions257 ай бұрын

  • 36 degrees is used for making a pentagon shape.

    @mathewoverton2149@mathewoverton21492 ай бұрын

  • 36 degrees is 10% of a circle.

    @ii1825@ii18257 ай бұрын

  • I like your t-shirts.

    @Augcliffe@Augcliffe2 ай бұрын

  • Feeler gauge same price at harbor freight

    @jeffvanek3404@jeffvanek34047 ай бұрын

  • 36 degrees is making miter cuts on molding laying flat

    @SorinG2010@SorinG20104 ай бұрын

  • So many little goodies!!! Stocking suffers people!!! That's right, I'm talkin Christmas!!!

    @mishellekochel4510@mishellekochel45107 ай бұрын

  • I think a lot of the Chinese MFGs have figured out that a lot of people - especially here in the US - will buy on price and can provide decent stuff at a good price. The company that continues to impress me is Wen. Their stuff is good.

    @ChrisHornberger@ChrisHornberger3 ай бұрын

  • 36° maybe for 1/10 of a circle but i dont know.

    @enn0@enn07 ай бұрын

  • 2023: “dot journal” 2024: “731 Bullet Journaling Tips and Tricks”

    @thefrankperspective4247@thefrankperspective42477 ай бұрын

    • 😂 awesome idea.

      @731Woodworks@731Woodworks7 ай бұрын

  • If you get something you do not like they instantly refund your money.. Some items if left in your cart Temu will offer a big discount. It seems completely random.. I got that digital angle finder for under 7 bucks when an offer popped up.. AND those silicone mats are almost completely heat proof...

    @twistedhillbilly6157@twistedhillbilly61573 ай бұрын

  • 36 degrees for a 6 sided object

    @thomaspogorzelski4299@thomaspogorzelski42997 ай бұрын

    • That was supposed to be 5 sided sorry hit wrong key

      @thomaspogorzelski4299@thomaspogorzelski42997 ай бұрын

  • I have a great video topic for you. "Great American Made Tools." How about that. I know that there are millions of woodworkers out there that love woodworking and all the cool tools that go along with that. The issue is so many of them are made by China, our known enemy and we are not so much motivated to help them beat us by buying their tools. Call it what it is. So we would love to see you and your colleagues promoting great tools made in the good ole USA.

    @jetme8815@jetme88152 ай бұрын

  • No links, no list of products mention 😕

    @yvettefitzgerald9989@yvettefitzgerald99899 күн бұрын

    • links are in the description of the video

      @731Woodworks@731Woodworks9 күн бұрын

  • It looks like I will be getting myself a hidden gem or three!!!

    @LYTOMIZE_Woodshop@LYTOMIZE_Woodshop7 ай бұрын

  • The 36° is just a 10th of a circle

    @DerekTJ@DerekTJАй бұрын

  • Isn't 36 one-tenth 360?

    @wartlme@wartlme3 ай бұрын

  • I like how you're honestly smelling things to say they smell the same lol

    @CeeJayThe13th@CeeJayThe13th7 ай бұрын

  • Teemoo

    @Daltargames@Daltargames7 ай бұрын

  • There are reports coming in about the Temu app accessing more data on phones than they are supposed to be. Might be worth avoiding recommending them as they may be collecting data on userscessing more data on phones than they are supposed to be. Might be worth avoiding recommending them as they are believed to be mass collecting data on their users

    @howevisual7099@howevisual70997 ай бұрын

    • Any app from China is collecting your data. Might as well give them you SSN and bank routing number.

      @TM_Stone@TM_Stone7 ай бұрын

    • ​@@TM_Stonecorrection. Every country is collecting data, it's not just China... America does it too, sorry to wake you up to reality lol KZhead is doing it as well chief. Good job. I swear yall must of seen this on CNN or fox and thats all you worry about cuz that's all they told you to worry about. Absolutely ridiculous how many comments on here trash talking temu meanwhile they're not the first by any means to do anything new. Collect data, steal your info.... what tech company doesn't do that? When you download an app and they demand access to your gallery/images and to your microphone, have ya ever wondered why? They can record you anytime they want

      @brucehansen7949@brucehansen79495 ай бұрын

  • Do you have any other suggestions for Domino tenon alternatives?

    @fortpatches@fortpatches3 ай бұрын

  • TaMoo or TeeMoo?

    @WoodUCreate@WoodUCreate7 ай бұрын

    • Potayto potahto, tomayto tomahto

      @731Woodworks@731Woodworks7 ай бұрын

  • The only thing I can think of for the 36 degree stop is that 360 / 36 = 10

    @madera-y-herramientas@madera-y-herramientas7 ай бұрын

  • Man, everything in my Temu ads is under $5. I didn't realize they sold anything for $30. LOL

    @markkempton4579@markkempton45797 ай бұрын

  • Tee-mew not te-moo😆

    @manson5150@manson51507 ай бұрын

  • 36 x 5 = 180; 36 x 10 = 360

    @lloyddinkelspiel9080@lloyddinkelspiel90807 ай бұрын

    • Ahh. Thanks!

      @731Woodworks@731Woodworks7 ай бұрын

  • Thanks Matt all these are good to know and a fair comment. Actually I purchased the Kreg Gauges that I purchase when you first illustrated them and their one of the most used tools in my shop. God bless and peace be with yo and your family!

    @richragan4810@richragan48107 ай бұрын

  • I THINK THE 36 DEGREE IS FOR CROW

    @rickculpepper709@rickculpepper7093 ай бұрын

  • Dammit. So much for me not buying any more stuff from Temu.....

    @OccasionalWoodcraft@OccasionalWoodcraft6 ай бұрын

  • At first i thought you were helping us newbies out. The more i watch your channel the more i noticed your auras are "buy this buy that, you need this you need that!!! "

    @chinh101@chinh1013 ай бұрын

  • didn't i just watch your video where you dissed every tool including some you are now praising. looks like someone got paid off!

    @thomasmaisano5716@thomasmaisano57167 ай бұрын

    • No. You watched the previous video of the tools I didn't like. These are the ones I did. Temu paid me exactly $0 to make this video 🙄

      @731Woodworks@731Woodworks7 ай бұрын

  • Tee-Moo

    @billdiehl156@billdiehl1567 ай бұрын

  • Bad timing on this video😬

    @JakeEllison94@JakeEllison947 ай бұрын
KZhead