Teaching a Beginner How to Deep Clean a car
I Teach a Beginner how to clean a car by going through the basics of an exterior & Interior Clean on a mini. This mini was filthy so it needed a serious deep clean before we take it on a road trip.
🛒 Everything used on the car:
Ava Easy P57 Pressure Washer - tinyurl.com/ava-p57-easy
Yum Undress - yumcars.co.uk/product/yum-und...
Yum Glass - yumcars.co.uk/product/yum-gla...
Bilt Hamber Touch-less - bilthamber.com/product/touch-...
Autoglym Advanced Wheel Cleaner - amzn.to/3SWOwxO
Mile Deep Shampoo - miledeep.com/collections/clea...
Infinity Wax Dark Glaze - tinyurl.com/dark-paint-glaze
Infinity Wax Plastic Coat - tinyurl.com/plastic-coat
Mile Deep Tar Remover - miledeep.com/products/resolve
Yum Interior - yumcars.co.uk/product/yum-int...
Turtle Wax inside Job - www.turtlewax.co.uk/?ref=epic
Turtle Wax Fabric Cleaner - www.turtlewax.co.uk/?ref=epic
Tyre Dressing - Not Available
===============================
Chapters:
00:00 - Introduction / Vehicle Inspection
00:50 - Engine Bay Cleaning
03:20 - Wheel Cleaning with Autoglym Advanced Wheel Cleaner
04:29 - Door Shuts & Petrol Cap Cleaning
05:33 - Snow Foaming the car
05:54 - Convertible roof Cleaning
07:20 - Contact Wash
07:57 - Drying Car
08:29 - Interior Cleaning
09:35 - Cleaning Fabric Seats
10:10 - Tornador
11:00 - Steering Wheel Cleaning
14:18 - protecting interior plastics
⭐ Car Detailing Discount Codes:
www.infinitywax.com - EPIC - 10% OFF
tornadordirect.com - EPIC10 - 10% OFF
www.mcrofbre.com/ EPIC10 - 10% OFF
garagegoalsuk.co.uk/ - EPIC - Special Discount
🔴Subscribe to us on KZhead: / @epicautomotivedetailing
//COME SAY HI
www.buymeacoffee.com/epiccarshow
Instagram - / epicautomotivedetailing
Facebook - / epicautomotivedetailing
//TOOLS & SERVICES I USE:
KZhead Software I use: www.tubebuddy.com/epiccarshow
The Music I use: www.epidemicsound.com/referra...
DISCLAIMER: Some Links included in this video description may be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission from the Linked Retailer. If you have any questions about how we make our affiliate marketing content work for our channel then please get in touch. There is no additional charge to you! Thank you for supporting Epic Automotive Detailing Channel.
Any new drivers looking to not have a health condition due to their car interior, this man does know what he is talking about. My rule 1 when getting a new car, never let the interior get into this state. 20 mins hoovering a week, and 10 mins dusting, one a month dress it if it look s a bit dull. i normally deep clean a car like this one a year to get rid of the winter. Supervised Matt, and he really needs it ;) lol
Thank you. Matt's new addition to his fleet needs a clean it's awful lol
@epicautomotivedetailing hehehe, yeah it was at the 'should we burn it' stage. I ment to ask how was the tw inside job to work with?
Just did a friends car as a treat. He had been away for several months (Forces, not prison) so did it as a welcome home present. He’d let it get into such a bad state before he left, then it grew mould over winter. Took me a full day on the interior, starting at 9 and finishing when it went dark. The worst of it is that his wife has severe allergies, including dust, and always wondered why she felt crap after long journeys. The car was disgusting. 🤮 Two goes with the carpet cleaner and the seats look almost new again. It was possibly the worst car I’ve ever seen. I don’t see the point of paying £40k for a car and treating it like crap.
Brilliant content for starters Dave 🎉
Thank you for the video Dave. Complete transformation you and Matt achieved there - top job 👍💪👌.
Thanks Karl we have saved so much footage for Epic Car Show channel as the whole series on how we got the car is on there
Dave is a great teacher, love this 🙌👍
Thank you very much
Great job on that mini Dave and Matt. Looks fantastic! 👍🏻
Thanks Simon 🙏
Once again another fantastic and informative video and job Dave.
Cheers Mark Appreciate the comments
Always knew that was going to look amazing - good work guys 👍🏻
Thanks Kevin we can now drive it and actually start using it in some videos now
Great video, youve really turned that Mini around!
Incredible job in just 18 minutes
Wish it did take 18 mins lol
@@epicautomotivedetailing IKR. How long did it take you both?
Got me discounted plastic dressing 👌🏻 cheers Dave 👍🏻
Great video, fellas.
Thanks Kerry
Brilliant video m8
Thank you
I like that some of the tools you use are not expensive. By chance I have just bought the same make DA polisher you used in this video. £75 compared to hundreds for pro machines. Then there’s the power drill. I had the same one for years and only bought it because it was cheap. No need to buy all the expensive toys. My drying towels are inexpensive ones from Amazon and they are amazing. I save my hard earned cash for good waxes, shampoos and polishes. I just wish I had the cash for a AVA power washer. 😂
Thank you yeah I've always tried to be set within a lower budget but thankfully as the channel grew it opened a few doors to get my hands on some decent tools like the air compressor and pressure washers
Would it be safe to wash the engine bay like that? Especially for the electrical stuff?
GREAT VIDEO LADS , TOP JOB !! RESULT WAS AMAZING LOVE THIS TYPE OF CONTENT.. 👊🌟🌟🌟🌟🌟
Thanks David
Do you disconnect the battery before cleaning the engine bay?
This video just goes to show. With a little bit of Patients and dedication and trust worthy ( Epic ) KZhead sight. You can achieve that showroom finish with any car no matter what the condition. Dad👍🍺
Cheers Dad we were running out of time towards end of the day so had to cut so much out as we have more for the epic car show channel
Hi dave, do you think you could do a full car clean only using infinity wax products? I'd love a video like that! Keep up the great work
Yes of course. I like to mix things up a bit now and then. They have some great products coming soon
Dave them pieces of shrapnel that you’re dealing with is where the monies at…. done it for 36 years I’m a detailer and buy it all my clients cars off them as I know they’ve been well looked after by myself equals winner 😉….. easy money,any you cannot affordto buy I’ll chop the pot with you 👊
Yeah it's a good network we have so soon as a car is available we normally get first refusal on them
Hey Epic, I’ve seen your videos on all pressure washer reviews, I’m leaning towards an AVA, but I’m guessing your reviews are more for mobile? What would you say would be the best pressure washer being stationary? Love your videos your a great help 👍
hiya it makes no difference really apart from if its stationary you can get away with having something slightly bigger that doesnt need moving
nice work guys. that glaze really did a superb job. Is it similar to and does it perform like Super Resin Polish?
Super resin polish has abrasives and fillers. This is basically just fillers with added protection so not long term but good enough to see the car through for a few months.
@@epicautomotivedetailing thanks for the clarification
What would you charge for something like this then?
where is the rear light or you have a replacement as it was missing when you washed the car
al being revealed on my other channel 😉
Dave, why are you not fixing interior as the first thing? Getting in and out of the car during a cleanup, will result in dirt on the cars body ... I mean, it's not named "detailing" for nothing, right? 😉 And btw: Have you tried out a plantbased and biodegradable solution with a dutch company called Airolube? More environmental friendly which is kinda needed in the car care industry. Thanks for another great transformation!
Hi Dave, when I’m machine polishing, I seem to get bits of the pad fling off and leave little specked of it on my car it’s easily removed but it’s a bit of a pain, do you have any tips to prevent this from happening thanks!
You could be overworking the pad. You also need to clean your pad out quite regularly whilst using. Don’t let the compound completely dry out before wiping off the panel either.
Nice mate , hmm that took some time I bet 😊
Thanks mate yeah it takes longer filming so this was done over 2 days as we had to film it for 2 channels
Can you please let me know how much BH Touchless you add to 1 liter water to create the foam?
I’d like to know this too - Mine always seems to be a little bit on the runny side, even when filling the bottle with roughly 1:2 touchless. I use an AVA P55 with the AVA brass foam cannon
Bilt Hamber is all about PIR not dilution ratios, and it also depends if you have the new updated formula or not, the old one is 4% PIR and the new one is 2% if I remember correctly, I'd say around 300ml (old Touchless) & 100-150ml for the new updated formula
How do you clean the brushes after use?
Anti bacterial spray, warm water 👌
what wet and dry vac do you use please?
Hyundai £65 I think it is now
What vacuum do you use / recommend?
Charles is the best all-round
Are you using car shampoo with cold water? I also use hot water.
Depends on location but normally I make do with cold
@epicautomotivedetailing Thanks. I always thought that hot water was better for contact wash, but maybe that's an old wives tale.
Looks like a brand new car.
Thank you
just use superglue
I got told u wasn't ment to jet wash a petrol engine but diesels are ok
That's a new roof needed. No need for any of that, just get the proper soft top cleaner in the 1st place
I can't win can I with the comments lol. If it's a newer cleaner roof I'd get dumb comments like (oh you should test this on an older roof) geez
@@epicautomotivedetailing soz not what I meant, would never put a pressure washer near a soft top, someone copying you might not be so careful and you can never shift the fabric burn once in. For a cheap way then Milton fluid(diluted to instructions) with a soft shoe brush. Will shift green mould easily as well as any normal dirt. If it is an old roof and its got orange/red stains then its only the dye that's ever worked for me
First :)
And nothing intelligent 🧠 to say or add to the conversation !..Sad 😔 really.
Agree
Electrics don't matter i guess, you can not do that on petrol engines
I see this comment so many times. Until I see someone actually destroy an engine bay with actual proof I'll just carry on lol