I've been asked a couple times about my PC specs and my Microsoft Flight Sim settings, so this is a quick video for that.
My system Specs:
Alienware Aurora R11
High-Performance CPU Liquid Cooling with and
1000W Power Supply
10th Gen Intel Core i9 10900F (10-Core, 20MB Cache, 2.8GHz to 5.2GHz w/Thermal Velocity Boost)
NVIDIA GeForce RTX 2080 Ti 11GB GDDR6
2TB M.2 PCIe NVMe SSD
64GB Dual Channel HyperX FURY DDR4 XMP at 3200MHz
SAMSUNG LC49RG90SSNXZA 49-Inch CRG9 Curved Gaming Monitor
My system Specs: Alienware Aurora R11 High-Performance CPU Liquid Cooling with and 1000W Power Supply 10th Gen Intel Core i9 10900F (10-Core, 20MB Cache, 2.8GHz to 5.2GHz w/Thermal Velocity Boost) NVIDIA GeForce RTX 2080 Ti 11GB GDDR6 2TB M.2 PCIe NVMe SSD 64GB Dual Channel HyperX FURY DDR4 XMP at 3200MHz SAMSUNG LC49RG90SSNXZA 49-Inch CRG9 Curved Gaming Monitor
My spec: Case : BE QUIET! DARK BASE PRO 900 REV. 2 FULL TOWER GAMING CASE MoBo : ROG ZENITH II EXTREME ALPHA CPU : Ryzen Threadripper 3970X 32 Core PAM : 256GB Corsair VENGEANCE DDR4 3000MHz GFX : ASUS ROG Strix GeForce RTX 2070 Super OC Edition 8GB GDDR6 X2 Storage : 2Tb SAMSUNG 970 EVO PLUS M.2 X2 Cooling : Corsair H150i RGB PRO XT Hydro Series High Performance CPU Cooler ASUS VG279Q, 27 InchFHD (1920 x 1080) Gaming monitor, IPS, up to 144Hz, 1ms MPRT, DP, HDMI, DVI, FreeSync, Low Blue Light, Flicker Free, TUV Certified X4 Bought from PCSpecialist (UK), I chose this spec so I would be able to play anything without any problems. I bought it back in December 2020 Monitors are from Amazon (UK)
Your system is a clone of mine, I run very similar settings but at times I notice that MSFS stutters in external view and apparently lower the settings automatically to prevent the stutter. When I go back to config, I can see a few medium settings when they were originally set up and saved at Ultra. I only use the system for flight sim, I don't have any other hard program running in the background except for the antivirus. I'm not sure yet why MSFS does that.
Just asking would a 3060 be able to run ultra
I copied some settings from your's and now I lost my Honeycomb throttle quadrant settings.....how can I get them back....Thanks in advance.
These general settings are completely independent from the control options. So anything you did in General settings are unrelated to your Bravo. Did you check to see if you accidently went back to the default Bravo profile? Go to Controls options, click on Bravo Throttle Quadrant and see what profile is listed? Is it DEFUALT? You can use the arrow icons to the left and right of the profile to switch to any other profiles you may have created.
@@RMAG yes.....I understand....I've created a parricular setting for GA single prop.....the default is still intact but my GA single prop setting didn't worked after I changed some setting in the display options. Even had a crash in my MSFS.