Bedding the Action, Savage Model 11
We glass bedded the action on the Savage Model 11. We only glass bedded around the front lug since the rest of the action was bedded once before with the old lug and barrel. Using the York's wax worked much better then the blue stuff that comes in the kit from Brownell's. I would recommend using it.
Visit us at
vaughnprecision.com
To become a Patreon click here
/ vaughnprecision
York's Gun Wax. www.amazon.com/gp/product/B08...
Tract Optics
www.tractoptics.com
Here is a list of Products we use for reloading!
Teslong Borescope
www.amazon.com/gp/product/B08...
MEC Marksman Press
www.amazon.com/gp/product/B06...
MEC Stand
www.amazon.com/gp/product/B07...
MEC Tray
www.amazon.com/gp/product/B07...
Lyman Case Prep Multi Tool
www.amazon.com/gp/product/B00...
Lyman Primer Pocket Uniformer
www.amazon.com/gp/product/B00...
Lyman Flash Hole Deburring and Uniformer Tool
www.amazon.com/gp/product/B00...
RCBS Trickle Tool
www.amazon.com/gp/product/B07...
Best Scope on the Market, it the one I use personally
www.amazon.com/gp/product/B07...
Duck Targets
www.amazon.com/gp/product/B00...
Turkey Targets
www.amazon.com/gp/product/B00...
3D Targets
www.amazon.com/gp/product/B08...
Bench Block
www.amazon.com/gp/product/B01...
Tekton Punch Set
www.amazon.com/gp/product/B01...
About a hundred years ago I bought an Accuglas kit and bedded my Remington 700 in .30-06. It worked really well and made a market improvement in the grouping. A dollar bill still slides easily between the barrel and fore end after 45 years.
Great Video as always Buddy ! I love these series type videos !!!
Thanks for making such a good video! Gave me the courage to do this on my own too
Thanks for showing the gel. I like that it doesn't need dams. Might give it a try sometime.
Thank you for this great video. I am working on my first stock swap. I'm ordering everything you used today. Thanks again
Thank you for the time, effort, and money that goes into these videos. I really am learning a lot from you.
I’m glad to hear it’s helping.! Thanks for watching the channel..!
Awesome video thank you, you made it look easy and I like the all thread idea, brilliant
'Looks great! I can't wait to see how she shoots!
Keep the videos coming.
Great videos! Would like to see you do a pillar job along with bedding on a savage?
Great Video! Thanks!
Looks like the wax works a lot better than the release agent lol . I once used shoe 👞 polish that worked a treat .I’m looking forward to the load development and accuracy testing 😀. Cheers 🍻
I’m itching to get loading and shooting it.!
@@vaughnprecision I bet you are big fella 😀.
Isn't it nice when a plan actually works out? I always sweat bullets in anticipation of popping the barrel free each time. Thank you for the heads up on the wax.
I used Johnson’s floor wax read in a online form and clean up just buff it out
Great video,thx for info
Great channel. You got a new subscriber. I will definitely be catching up on the rest of your videos. Joe's a Friend of mine, he point me this direction. He definitely wasn't wrong. 👍🇺🇲🇺🇲✌
Joe Rhea suggested I check your channel out. Glad I did. I don’t do any long distance shooting at all, just a little 22lr with a 1941 Winchester 74. The rifle is pretty accurate but always looking for tips to learn something new. Thanks.
Thanks for stopping by.!
Cool . I’ve heard of people using boot wax too and also claiming it’s superior to the releasing agent . Go figure eh ?
That bedding looks REAL nice! That gun is gonna be a tack driver, I'll bet!
I sure hope it drives tacks.!
ACRA Glass has a 1% shrinkage.. Devcon 10110 Steel Putty sets up like concrete.
Great video where do you remove the wood from The recoil area in a stock would it be in the front part or the rear do you have to go deeper also with a new recoil lug. thank you in advance hope to hear from you soon keep up the good work on your videos. Thanks ahead of time.
Hey Vaughn! I've be using DevCon 10110 as an alternative to ArcaGlas when I ran out. I've since not looked back less the client wants to match color. It's really easy to work with and the results look great. Paired with a strip of rubber pipe tape on the barrel to keep 1/4 inch barrel float. If you have experience with DevCon, would love to here it
I do have some experience and it’s good stuff. I have about a gallon of the glass so I keep using that up for now.
Wow, that was risky. I would have tested it on something to throw away. Brownell's release compound is good stuff. Never had a problem.
Would you recommend pillar bedding the Boyd’s stock or skip it and just glass bed it? I have one on the way now but I’m on the fence about pillar bedding it as well. It doesn’t add much to the cost and shouldn’t take much more time but I don’t want to do it if it adds expense with hardly any benefits.
I would only pillar the stock if your shooting a magnum like a 7mm REM MAG or a 300 Win Mag
Thanks for the advice! I’ll plan to pillar bed it as well! It’s a 7mm RM that may end up a 300 someday!
Do you use tape on the recoil lug to leave a little clearance, or just release agent for a tighter fit?
I’ve done it both ways. If the lug has a tapper on the edges then I don’t typically use tape.
Hey guy think I heard you mention a product for cleaning lead out of a bore, could you tell me which one you use thanks. Robert
I really like a product called Wipe Out. Here’s a link to it. amzn.to/3swsraB
😁
This is an off-topic question do you have any experience with reloading the 300 Remington ultra mag? Because of the high pressures I am concerned with how many times you can reload a case should you full size or just next size? It has so much pressure that even the store-bought ammunition is flattening the primers anyways if you have any experience I would love to hear some feedback thank you
I’ve loaded them for friends but not enough to give you an informed opinion, sorry.
I respect that thank you
With new brass and full house loads two is the maximum. The primer pockets become loose. This brass is then used for reduced loads.
Thank you very much that’s what I was looking for I can find load data everywhere but not too much information on case life and stuff like that.
Unscrew the studs and put the bolt in to help remove the action
Could have sprayed PAM for wax.
With a 50/550 mix. It is not until you use most of one pot you realize how bad your guess is. Can be as much as 20% difference. A lot of waste.
I believe I could do that👍👍👍👍👍👍👍🥳💥
Use Liquid Wrench for your release agent. Thank me later.
Thank you
Good video, easy to follow along for anyone who doesn’t know how to re bed. I don’t understand what the purpose of the comment about “no petroleum product or any of that bad stuff”. I had really hoped our firearm community was still spared from the fear mongering of petroleum products in our business. I suppose it’s time to stop using gun oil/solvents and switch to ear wax and vinegar to clean that gun? Wax on cheese, petroleum product. Baby oil that millions use on their babies every day, petroleum product. It’s amazing how uneducated people are towards petroleum products. There is nothing wrong with them when used accordingly. Sugar kills more people and oil does and it’s funny because oil doesn’t kill the environment, people do.. I apologize for the rant but with the direction your president is taking you guys, it’s going to be one heck of a sad ride, especially for firearm owners.
I feel bad for a negative comment, it’s just this stuff has been bugging me lately. Small comments like this is what our governments feed off of and we lose our freedoms one by one.
Petroleum isn’t bad, but I’ve found it can discolor wood and in some cases make a mess out of wood finishes. I use petroleum products to clean my guns all the time. But I’m very careful about what I use on wood.
That is completely a fair argument. Again I’m sorry for going off. I enjoy your work.
@@crashs278 no worries at all..! Thanks for watching and leaving a comment, I really do appreciate it
Most petroleum based products also have an adverse effect on rubber. That is to say, it liquifies it. So if you had rubber grips or recoil pads or whatever, you won't for long.